This allows x86_64 kernels to enable vmapped stacks by setting
HAVE_ARCH_VMAP_STACK=y - which enables the CONFIG_VMAP_STACK=y
high level Kconfig option.

There are a couple of interesting bits:

First, x86 lazily faults in top-level paging entries for the vmalloc
area.  This won't work if we get a page fault while trying to access
the stack: the CPU will promote it to a double-fault and we'll die.
To avoid this problem, probe the new stack when switching stacks and
forcibly populate the pgd entry for the stack when switching mms.

Second, once we have guard pages around the stack, we'll want to
detect and handle stack overflow.

I didn't enable it on x86_32.  We'd need to rework the double-fault
code a bit and I'm concerned about running out of vmalloc virtual
addresses under some workloads.

This patch, by itself, will behave somewhat erratically when the
stack overflows while RSP is still more than a few tens of bytes
above the bottom of the stack.  Specifically, we'll get #PF and make
it to no_context and them oops without reliably triggering a
double-fault, and no_context doesn't know about stack overflows.
The next patch will improve that case.

Thank you to Nadav and Brian for helping me pay enough attention to
the SDM to hopefully get this right.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c88f3e2920b18e6cc621d772a04a62c06869037e.1470907718.git.luto@kernel.org
[ Minor edits. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed.  Build testing
revealed some implicit header usage that was fixed up accordingly.

Note that some bool/obj-y instances remain since module.h is
the header for some exception table entry stuff, and for things
like __init_or_module (code that is tossed when MODULES=n).
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160714001901.31603-4-paul.gortmaker@windriver.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Forcing in_interrupt() to return true if we're not in a bona fide
interrupt confuses the softirq code.  This fixes warnings like:

  NOHZ: local_softirq_pending 282

... which can happen when running things like selftests/x86.

This will change perf's static percpu buffer usage in IST context.
I think this is okay, and it's changing the behavior to match
historical (pre-4.0) behavior.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 95927475 ("x86, traps: Track entry into and exit from IST context")
Link: http://lkml.kernel.org/r/cdc215f94d118d691d73df35275022331156fb45.1464130360.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

alternative.h pulls in ptrace.h, which means that alternatives can't
be used in anything referenced from ptrace.h, which is a mess.

Break the dependency by pulling text patching helpers into their own
header.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/99b93b13f2c9eb671f5c98bba4c2cbdc061293a2.1461698311.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit abd4f750 ("x86: i386-show-unhandled-signals-v3") did turn on
the showing-unhandled-signal behaviour for i386 for some exception handlers,
but for no reason do_trap() is left out (my naive guess is because turning it on
for do_trap() would be too noisy since do_trap() is shared by several exceptions).

And since the same commit make "show_unhandled_signals" a debug tunable(in
/proc/sys/debug/exception-trace), and x86 by default turning it on.

So it would be strange for i386 users who turing it on manually and expect
seeing the unhandled signal output in log, but nothing.

This patch turns it on for i386 in do_trap() as well.
Signed-off-by: NJianyu Zhan <nasa4836@gmail.com>
Reviewed-by: NJan Beulich <jbeulich@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Cc: dave.hansen@linux.intel.com
Cc: heukelum@fastmail.fm
Cc: jbeulich@novell.com
Cc: jdike@addtoit.com
Cc: joe@perches.com
Cc: luto@kernel.org
Link: http://lkml.kernel.org/r/1457612398-4568-1-git-send-email-nasa4836@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We want all of the syscall entries to run with interrupts off so that
we can efficiently run context tracking before enabling interrupts.

This will regress int $0x80 performance on 32-bit kernels by a
couple of cycles.  This shouldn't matter much -- int $0x80 is not a
fast path.

This effectively reverts:

  657c1eea ("x86/entry/32: Fix entry_INT80_32() to expect interrupts to be on")

... and fixes the same issue differently.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/59b4f90c9ebfccd8c937305dbbbca680bc74b905.1457558566.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The first instruction of the SYSENTER entry runs on its own tiny
stack.  That stack can be used if a #DB or NMI is delivered before
the SYSENTER prologue switches to a real stack.

We have code in place to prevent us from overflowing the tiny stack.
For added paranoia, add a canary to the stack and check it in
do_debug() -- that way, if something goes wrong with the #DB logic,
we'll eventually notice.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/6ff9a806f39098b166dc2c41c1db744df5272f29.1457578375.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Due to a blatant design error, SYSENTER doesn't clear TF (single-step).

As a result, if a user does SYSENTER with TF set, we will single-step
through the kernel until something clears TF.  There is absolutely
nothing we can do to prevent this short of turning off SYSENTER [1].

Simplify the handling considerably with two changes:

  1. We already sanitize EFLAGS in SYSENTER to clear NT and AC.  We can
     add TF to that list of flags to sanitize with no overhead whatsoever.

  2. Teach do_debug() to ignore single-step traps in the SYSENTER prologue.

That's all we need to do.

Don't get too excited -- our handling is still buggy on 32-bit
kernels.  There's nothing wrong with the SYSENTER code itself, but
the #DB prologue has a clever fixup for traps on the very first
instruction of entry_SYSENTER_32, and the fixup doesn't work quite
correctly.  The next two patches will fix that.

[1] We could probably prevent it by forcing BTF on at all times and
    making sure we clear TF before any branches in the SYSENTER
    code.  Needless to say, this is a bad idea.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a30d2ea06fe4b621fe6a9ef911b02c0f38feb6f2.1457578375.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Leaving any bits set in DR6 on return from a debug exception is
asking for trouble.  Prevent it by writing zero right away and
clarify the comment.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3857676e1be8fb27db4b89bbb1e2052b7f435ff4.1457578375.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The SDM says that debug exceptions clear BTF, and we need to keep
TIF_BLOCKSTEP in sync with BTF.  Clear it unconditionally and improve
the comment.

I suspect that the fact that kmemcheck could cause TIF_BLOCKSTEP not
to be cleared was just an oversight.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/fa86e55d196e6dde5b38839595bde2a292c52fdc.1457578375.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Huge amounts of help from  Andy Lutomirski and Borislav Petkov to
produce this. Andy provided the inspiration to add classes to the
exception table with a clever bit-squeezing trick, Boris pointed
out how much cleaner it would all be if we just had a new field.

Linus Torvalds blessed the expansion with:

  ' I'd rather not be clever in order to save just a tiny amount of space
    in the exception table, which isn't really criticial for anybody. '

The third field is another relative function pointer, this one to a
handler that executes the actions.

We start out with three handlers:

 1: Legacy - just jumps the to fixup IP
 2: Fault - provide the trap number in %ax to the fixup code
 3: Cleaned up legacy for the uaccess error hack
Signed-off-by: NTony Luck <tony.luck@intel.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f6af78fcbd348cf4939875cfda9c19689b5e50b8.1455732970.git.tony.luck@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

If we have an FPU, there's no need to check CR0 for FPU emulation.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/980004297e233c27066d54e71382c44cdd36ef7c.1453675014.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Systems without an FPU are generally old and therefore use lazy FPU
switching. Unsurprisingly, math emulation in eager FPU mode is a
bit buggy. Fix it.

There were two bugs involving kernel code trying to use the FPU
registers in eager mode even if they didn't exist and one BUG_ON()
that was incorrect.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/b4b8d112436bd6fab866e1b4011131507e8d7fbe.1453675014.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Make the preemption and interrupt flag handling more readable by
removing preempt_conditional_sti() and preempt_conditional_cli()
helpers and using preempt_disable() and
preempt_enable_no_resched() instead.

Rename contitional_sti() and conditional_cli() to the more
understandable cond_local_irq_enable() and
cond_local_irq_disable() respectively, while at it.
Suggested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NAlexander Kuleshov <kuleshovmail@gmail.com>
[ Boris: massage text. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453750913-4781-2-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

MPX includes two separate "extended state components".  There is
no real need to have an 'mpx_struct' because we never really
manage the states together.

We also separate out the actual data in 'mpx_bndcsr_state' from
the padding.  We will shortly be checking the state sizes
against our structures and need them to match.  For consistency,
we also ensure to prefix these types with 'mpx_'.

Lastly, we add some comments to mirror some of the descriptions
in the Intel documents (SDM) of the various state components.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233129.384B73EB@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

There are two concepts that have some confusing naming:
 1. Extended State Component numbers (currently called
    XFEATURE_BIT_*)
 2. Extended State Component masks (currently called XSTATE_*)

The numbers are (currently) from 0-9.  State component 3 is the
bounds registers for MPX, for instance.

But when we want to enable "state component 3", we go set a bit
in XCR0.  The bit we set is 1<<3.  We can check to see if a
state component feature is enabled by looking at its bit.

The current 'xfeature_bit's are at best xfeature bit _numbers_.
Calling them bits is at best inconsistent with ending the enum
list with 'XFEATURES_NR_MAX'.

This patch renames the enum to be 'xfeature'.  These also
happen to be what the Intel documentation calls a "state
component".

We also want to differentiate these from the "XSTATE_*" macros.
The "XSTATE_*" macros are a mask, and we rename them to match.

These macros are reasonably widely used so this patch is a
wee bit big, but this really is just a rename.

The only non-mechanical part of this is the

	s/XSTATE_EXTEND_MASK/XFEATURE_MASK_EXTEND/

We need a better name for it, but that's another patch.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233126.38653250@viggo.jf.intel.com
[ Ported to v4.3-rc1. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We were asserting that we were all the way in CONTEXT_KERNEL
when exception handlers were called.  While having this be true
is, I think, a nice goal (or maybe a variant in which we assert
that we're in CONTEXT_KERNEL or some new IRQ context), we're not
quite there.

In particular, if an IRQ interrupts the SYSCALL prologue and the
IRQ handler in turn causes an exception, the exception entry
will be called in RCU IRQ mode but with CONTEXT_USER.

This is okay (nothing goes wrong), but until we fix up the
SYSCALL prologue, we need to avoid warning.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c81faf3916346c0e04346c441392974f49cd7184.1440133286.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

vm86.h was being implicitly included in alot of places via
processor.h, which in turn got it from math_emu.h.  Break that
chain and explicitly include vm86.h in all files that need it.
Also remove unused vm86 field from math_emu_info.
Signed-off-by: NBrian Gerst <brgerst@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1438148483-11932-7-git-send-email-brgerst@gmail.com
[ Fixed build failure. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This commit renames rcu_lockdep_assert() to RCU_LOCKDEP_WARN() for
consistency with the WARN() series of macros.  This also requires
inverting the sense of the conditional, which this commit also does.
Reported-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NIngo Molnar <mingo@kernel.org>

On 64-bit kernels, we don't need it any more: we handle context
tracking directly on entry from user mode and exit to user mode.

On 32-bit kernels, we don't support context tracking at all, so
these callbacks had no effect.

Note: this doesn't change do_page_fault().  Before we do that,
we need to make sure that there is no code that can page fault
from kernel mode with CONTEXT_USER.  The 32-bit fast system call
stack argument code is the only offender I'm aware of right now.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/ae22f4dfebd799c916574089964592be218151f9.1435952415.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Other than the super-atomic exception entries, all exception
entries are supposed to switch our context tracking state to
CONTEXT_KERNEL. Assert that they do.  These assertions appear
trivial at this point, as exception_enter() is the function
responsible for switching context, but I'm planning on reworking
x86's exception context tracking, and these assertions will help
make sure that all of this code keeps working.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/20fa1ee2d943233a184aaf96ff75394d3b34dfba.1435952415.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is the first in a series of MPX tracing patches.
I've found these extremely useful in the process of
debugging applications and the kernel code itself.

This exception hooks in to the bounds (#BR) exception
very early and allows capturing the key registers which
would influence how the exception is handled.

Note that bndcfgu/bndstatus are technically still
64-bit registers even in 32-bit mode.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183703.5FE2619A@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The MPX code can only work on the current task.  You can not,
for instance, enable MPX management in another process or
thread. You can also not handle a fault for another process or
thread.

Despite this, we pass a task_struct around prolifically.  This
patch removes all of the task struct passing for code paths
where the code can not deal with another task (which turns out
to be all of them).

This has no functional changes.  It's just a cleanup.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/20150607183702.6A81DA2C@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The MPX registers (bndcsr/bndcfgu/bndstatus) are not directly
accessible via normal instructions.  They essentially act as
if they were floating point registers and are saved/restored
along with those registers.

There are two main paths in the MPX code where we care about
the contents of these registers:

	1. #BR (bounds) faults
	2. the prctl() code where we are setting MPX up

Both of those paths _might_ be called without the FPU having
been used.  That means that 'tsk->thread.fpu.state' might
never be allocated.

Also, fpu_save_init() is not preempt-safe.  It was a bug to
call it without disabling preemption.  The new
get_xsave_addr() calls unlazy_fpu() instead and properly
disables preemption.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave@sr71.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/20150607183701.BC0D37CF@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The 'system_call' entry points differ starkly between native 32-bit and 64-bit
kernels: on 32-bit kernels it defines the INT 0x80 entry point, while on
64-bit it's the SYSCALL entry point.

This is pretty confusing when looking at generic code, and it also obscures
the nature of the entry point at the assembly level.

So unangle this by splitting the name into its two uses:

	system_call (32) -> entry_INT80_32
	system_call (64) -> entry_SYSCALL_64

As per the generic naming scheme for x86 system call entry points:

	entry_MNEMONIC_qualifier

where 'qualifier' is one of _32, _64 or _compat.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Rename the following system call entry points:

	ia32_cstar_target       -> entry_SYSCALL_compat
	ia32_syscall            -> entry_INT80_compat

The generic naming scheme for x86 system call entry points is:

	entry_MNEMONIC_qualifier

where 'qualifier' is one of _32, _64 or _compat.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This cleans up the call sites and the function a bit,
and also makes it more symmetric with the other high
level FPU state handling functions.

It's still only valid for the current task, as we copy
to the FPU registers of the current CPU.

No change in functionality.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Use these consistent names:

    struct fregs_state           # was: i387_fsave_struct
    struct fxregs_state          # was: i387_fxsave_struct
    struct swregs_state          # was: i387_soft_struct
    struct xregs_state           # was: xsave_struct
    union  fpregs_state          # was: thread_xstate

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Factor out the FPU error code handling code from traps.c and fpu/internal.h
and move them close to each other.

Also convert the helper functions to 'struct fpu *', which further simplifies
them.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

So 6 years ago we made the FPU fpstate dynamically allocated:

  aa283f49 ("x86, fpu: lazy allocation of FPU area - v5")
  61c4628b ("x86, fpu: split FPU state from task struct - v5")

In hindsight this was a mistake:

   - it complicated context allocation failure handling, such as:

		/* kthread execs. TODO: cleanup this horror. */
		if (WARN_ON(fpstate_alloc_init(fpu)))
			force_sig(SIGKILL, tsk);

   - it caused us to enable irqs in fpu__restore():

                local_irq_enable();
                /*
                 * does a slab alloc which can sleep
                 */
                if (fpstate_alloc_init(fpu)) {
                        /*
                         * ran out of memory!
                         */
                        do_group_exit(SIGKILL);
                        return;
                }
                local_irq_disable();

   - it (slightly) slowed down task creation/destruction by adding
     slab allocation/free pattens.

   - it made access to context contents (slightly) slower by adding
     one more pointer dereference.

The motivation for the dynamic allocation was two-fold:

   - reduce memory consumption by non-FPU tasks

   - allocate and handle only the necessary amount of context for
     various XSAVE processors that have varying hardware frame
     sizes.

These days, with glibc using SSE memcpy by default and GCC optimizing
for SSE/AVX by default, the scope of FPU using apps on an x86 system is
much larger than it was 6 years ago.

For example on a freshly installed Fedora 21 desktop system, with a
recent kernel, all non-kthread tasks have used the FPU shortly after
bootup.

Also, even modern embedded x86 CPUs try to support the latest vector
instruction set - so they'll too often use the larger xstate frame
sizes.

So remove the dynamic allocation complication by embedding the FPU
fpstate in task_struct again. This should make the FPU a lot more
accessible to all sorts of atomic contexts.

We could still optimize for the xstate frame size in the future,
by moving the state structure to the last element of task_struct,
and allocating only a part of that.

This change is kept minimal by still keeping the ctx_alloc()/free()
routines (that now do nothing substantial) - we'll remove them in
the following patches.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

So fpu_save_init() is a historic name that got its name when the only
way the FPU state was FNSAVE, which cleared (well, destroyed) the FPU
state after saving it.

Nowadays the name is misleading, because ever since the introduction of
FXSAVE (and more modern FPU saving instructions) the 'we need to reload
the FPU state' part is only true if there's a pending FPU exception [*],
which is almost never the case.

So rename it to copy_fpregs_to_fpstate() to make it clear what's
happening. Also add a few comments about why we cannot keep registers
in certain cases.

Also clean up the control flow a bit, to make it more apparent when
we are dropping/keeping FP registers, and to optimize the common
case (of keeping fpregs) some more.

[*] Probably not true anymore, modern instructions always leave the FPU
    state intact, even if exceptions are pending: because pending FP
    exceptions are posted on the next FP instruction, not asynchronously.

    They were truly asynchronous back in the IRQ13 case, and we had to
    synchronize with them, but that code is not working anymore: we don't
    have IRQ13 mapped in the IDT anymore.

    But a cleanup patch is obviously not the place to change subtle behavior.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This unifies all the FPU related header files under a unified, hiearchical
naming scheme:

 - asm/fpu/types.h:      FPU related data types, needed for 'struct task_struct',
                         widely included in almost all kernel code, and hence kept
                         as small as possible.

 - asm/fpu/api.h:        FPU related 'public' methods exported to other subsystems.

 - asm/fpu/internal.h:   FPU subsystem internal methods

 - asm/fpu/xsave.h:      XSAVE support internal methods

(Also standardize the header guard in asm/fpu/internal.h.)
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Migrate this function to pure 'struct fpu' usage.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Move to the new fpu__*() namespace.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

It's another piece of FPU internals that is better off close to
the other FPU internals.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Fix a minor header file dependency bug in asm/fpu-internal.h: it
relies on i387.h but does not include it. All users of fpu-internal.h
included it explicitly.

Also remove unnecessary includes, to reduce compilation time.

This also makes it easier to use it as a standalone header file
for FPU internals, such as an upcoming C module in arch/x86/kernel/fpu/.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This field is kept separate from the main FPU state structure for
no good reason.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Most init_fpu() users don't want the register-saving aspect of the
function, they are calling it for 'current' and when FPU registers
are not allocated and initialized yet.

Split out a simplified API that does just that (and add debug-checks
for these conditions): fpstate_alloc_init().

Use it where appropriate.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This function is a misnomer on two levels:

1) it doesn't really manipulate TS on modern CPUs anymore, its
   primary purpose is to save FPU state, used:

      - when executing fork()/clone(): to copy current FPU state
        to the child's FPU state.

      - when handling math exceptions: to generate the math error
        si_code in the signal frame.

2) even on legacy CPUs it doesn't actually 'unlazy', if then
   it lazies the FPU state: as a side effect of the old FNSAVE
   instruction which clears (destroys) FPU state it's necessary
   to set CR0::TS.

So rename it to fpu__save() to better reflect its purpose.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Use IA32_SYSCALL_VECTOR for both compat and native.
Signed-off-by: NBrian Gerst <brgerst@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431185813-15413-4-git-send-email-brgerst@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>