This is a copy and paste error.  It should be using sizeof(cap->driver)
instead of sizeof(cap->card).
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: Richard Rojförs <richard.rojfors@pelagicore.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Hi,

release_firmware() just does nothing if passed a NULL pointer. So there's
no reason to test before the call in
saa7164-fw.c::saa7164_downloadfirmware().

Removing the pointless conditional also saves a few bytes.
before:
   text    data     bss     dec     hex filename
   7943     112    2144   10199    27d7 drivers/media/video/saa7164/saa7164-fw.o
after:
   text    data     bss     dec     hex filename
   7931     112    2136   10179    27c3 drivers/media/video/saa7164/saa7164-fw.o
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adds USB PIDs for the Elgato EyeTV Sat device.
This device is a clone of the Terratec S7.
Signed-off-by: NSam Doshi <sam@metal-fish.co.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Streaming using mmap didn't work in the VIU driver. We need to
start/stop DMA in streamon/streamoff and free the buffers on
release. Add appropriate driver extension now.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

zr->frame_num is a counter and && was intended here instead of &.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On Fri, 2010-12-03 at 09:32 -0200, Mauro Carvalho Chehab wrote:
> Em 27-11-2010 11:13, Malcolm Priestley escreveu:
> > Driver Version v1.73 - Frontend attach change.
> > To stop double rc registration in multi tuner environment or firmware change.
> >
> > Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
> >
> >
> > +static int lme_name(struct dvb_usb_adapter *adap)
> > +{
> > +	struct lme2510_state *st = adap->dev->priv;
> > +	const char *desc = adap->dev->desc->name;
> > +	char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395"};
> > +	char *name = adap->fe->ops.info.name;
> > +
> > +	strcpy(name, desc);
> > +	strcat(name, fe_name[st->tuner_config]);
>
> Please use, instead, strlcpy/strlcat, to avoid writing outside the buffer size.
>

Driver Version v1.74
Amended patch with change to strlcpy/strlcat.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix em28xx build by adding hardirq.h header file:

drivers/media/video/em28xx/em28xx-vbi.c:49: error: implicit declaration of function 'in_interrupt'
Reported-by: NZimny Lech <napohybelskurwysynom2010@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

'n' may be bigger than MAX_INT*sizeof(int), if so checking of truncated
(int)(n/sizeof(int)) for LIRCBUF_SIZE overflow and then using nontruncated 'count'
doesn't make sense.  Also n may be up to sizeof(int)-1 bytes bigger than expected,
so check value of (n % sizeof(int)) too.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This module implements V4L2 controls for the Texas Instruments
WL1273 FM Radio and handles the communication with the chip.
Signed-off-by: NMatti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is the core of the WL1273 FM radio driver, it connects
the two child modules. The two child drivers are
drivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c.

The radio-wl1273 driver implements the V4L2 interface and communicates
with the device. The ALSA codec offers digital audio, without it only
analog audio is available.
Signed-off-by: NMatti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for cameras with the HV7131D sensor, such as the 0c45:602a
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Our old start of frame detection code wrongly assumes that the sof
marker always lives at the beginning of the frame. At least for the
0c45:602a camera this is not the case. This patch also improves
the framerate from 28 fps to 30 fps with the 0c45:6005 and 0c45:6007
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I've a 0c45:6007 camera and it works fine with the gspca_sonixb driver,
so make that handle it instead of the deprecated sn9c102 driver.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

At Pixelview SBTVD Hybrid, the bits sent by the IR are inverted. Due to that,
the existing keytables produce wrong codes.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This fixes the following error in PowerPC builds:

drivers/media/video/timblogiw.c: In function 'timblogiw_probe':
drivers/media/video/timblogiw.c:749: error: timblogiw_ioctl_ops causes a section type conflict
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Support for mt9m001 (mi1300) is broken:
	- Table is incomplete;
	- Only one resolution is currently supported by the driver;
	- Resolution is incomplete;
	- it complains about broken JPEG headers.

Use the same init found on em28xx driver, and properly report the
output format as 8-bits GRAY.
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Changeset 35680baa broke several devices:
	- Sony Playstation Eye (1415:2000);
	- Gigaware model 25-234 (0c45:628f);
	- Logitech Messenger Plus (046d:08f6).

Probably more devices were broken by this change.

What happens is that several devices don't need to save some bandwidth
for audio.

Also, as pointed by Hans de Goede <hdegoede@redhat.com>, the logic
that implements the bandwidth reservation for audio is broken, since
it will reduce the alt number twice, on devices with audio.

So, let's just revert the broken logic, and think on a better solution
for usb 1.1 devices with audio that can't use the maximum packetsize.
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use macros for the supported scales, instead of using magic numbers
from 0 to 3.

Code become cleaner by using macros for it.
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of just assuming a ov9650 sensor based on USB ID,
double-check it, by reading the sensor ID.
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add kycodes for DSR-0112 remote that comes together with
Haupauge MiniStick
  http://lirc.sourceforge.net/remotes/hauppauge/DSR-0112.jpg

[mchehab@redhat.com: Fix KEY_PREVIOUS to match the definition for the other model]
Signed-off-by: NRichard Zidlicky <rz@linux-m68k.org>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I found that the problems people have reported with the USB-TV-stick
"Terratec Cinergy Hybrid T USB XS" (USB-ID: 0ccd:0042)
are coming from a wrong header file in the v4l-sources.

Attached is a diff, which fixes the problem (tested successfully here).
Obviously the USB-ID has been associated with a wrong chip: EM2880
instead of EM2882, which would be correct.
Reported-by: NPhilippe Bourdin <richel@AngieBecker.ch>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

kobject_set_name() may fail with -ENOMEM, check for it.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds a loopback driver to rc-core which I've found useful for
running scripted tests of different parts of rc-core without having to
fiddle with real hardware.

Basically it emulates hardware with a learning and a non-learning
receiver and two transmitters (which correspond to the two
receivers). TX data that is sent is fed back as input on the
corresponding receiver, which allows for debugging of IR decoders,
keymaps, etc.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

At ir_setkeycode, if INPUT_KEYMAP_BY_INDEX is used, the routine may return
an invalid value if not error.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The RC5 old decoder used custom_irq to indicate the need of handling
the IRQ on a different way. Instead of doing it, let the core just call the
bttv input IRQ handler, and add the code there to call the legacy decoder.

While here, remove the gpioq waitqueue, as this is not used anywhere, and
add a debug msg to help removing the legacy RC5 code.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The lock isn't held here and doesn't need to be unlocked.  The code has
been like this since the driver was merged.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When trying to create persistent device names for mceusb and streamzap
devices, I noticed that their respective drivers are not creating the rc
device as a child of the USB device. Rather it creates it as virtual
device. As a result, udev cannot use the USB device information to
create persistent device names for event and lirc devices associated
with the rc device. Not having persistent device names makes it more

difficult to make use of the devices in userspace as their names can
change.

Forward-ported to media_tree staging/for_v2.6.38 and tested with
both streamzap and mceusb devices:
$ ll /dev/input/by-id/
...
lrwxrwxrwx. 1 root root 9 Nov 17 17:06 usb-Streamzap__Inc._Streamzap_Remote_Control-event-if00 -> ../event6
lrwxrwxrwx. 1 root root 9 Nov 17 17:05 usb-Topseed_Technology_Corp._eHome_Infrared_Transceiver_TS000BzY-event-if00 -> ../event5
Previously, nada.
Signed-off-by: NPaul Bender <pebender@gmail.com>
Tested-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make sure we have a matching chip id high and one or the other
of the chip id low values.
Print the values if the probe fails.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I've got code which adds support of GoTView PCI DVD3 Hybrid tuner in
cx18 module and Andy Walls in ivtv mailing-list gave me some advice on
making a patch and sending it here. So here's the patch against
staging/2.6.37-rc1 branch (the tutorial recommends to include it as
plain text but if it's the case I can surely send as an attachment):

Several comments on the patch:

1. Both users on the official Gotview forum and support said that PCI
DVD3 is very similar to Yuan MPC718 card so the main part of code is
taken from Yuan configuration. Some users reported it to work properly.

2. Everything is being initialized correctly including analog, dvb,
radio and alsa parts. Analogue part and alsa virtual card is tested by
myself using original Gotview card.

[mchehab@redhat.com: Whitespace cleanups]
Signed-off-by: NAlexey Chernov <4ernov@gmail.com>
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It seems that a wrong cut-and-paste error were done here.
Reported-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The patch fixes the rc-tbs-nec table after converting
drivers/media/video/cx88 to ir-core
(commit ba7e90c9f878e0ac3c0614a5446fe5c62ccc33ec).

It is also adds two missing buttons (10- and 10+) with
its definition (KEY_10CHANNELSUP and KEY_10CHANNELSDOWN).

[mchehab@redhat.com: move keycode numbers to 0x1b8/0x1b9 as requested by the input Maintainer]
Signed-off-by: NMariusz Białończyk <manio@skyboo.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Sparse complains because there are no __user annotations.

drivers/media/rc/lirc_dev.c:156:27: warning:
	incorrect type in initializer (incompatible argument 2 (different address spaces))
drivers/media/rc/lirc_dev.c:156:27:    expected int ( *read )( ... )
drivers/media/rc/lirc_dev.c:156:27:    got int ( extern [toplevel] *<noident> )( ... )
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix some minor comments etc which are leftover from the old naming scheme.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Similarly to saa7134, bttv_ir has two timers, only one of which is used
at a time and which serve the same purpose. Merge them.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

bttv_ir is more consistent with all other structs used in the same driver.
Also, clean up the struct to remove commented out members and the work_struct
which is unused.

[mchehab@redhat.com: fix a warning at bttv_rc5_timer_end]
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>