- 03 2月, 2008 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 2月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
Add a net argument to inet6_lookup and propagate it further. Actually, this is tcp-v6 implementation of what was done for tcp-v4 sockets in a previous patch. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2008 2 次提交
-
-
由 Gerrit Renker 提交于
The option parsing code currently only parses on full sk's. This causes a problem for options sent during the initial handshake (in particular timestamps and feature-negotiation options). Therefore, this patch extends the option parsing code with an additional argument for request_socks: if it is non-NULL, options are parsed on the request socket, otherwise the normal path (parsing on the sk) is used. Subsequent patches, which implement feature negotiation during connection setup, make use of this facility. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch converts all callers of xfrm_lookup that used an explicit value of 1 to indiciate blocking to use the new flag XFRM_LOOKUP_WAIT. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 11月, 2007 1 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 10月, 2007 1 次提交
-
-
由 Gerrit Renker 提交于
This fixes a problem when analysing erroneous packets in dccp_v{4,6}_err: * dccp_hdr_seq currently takes an skb * however, the transport headers in the skb are shifted, due to the preceding IPv4/v6 header. Fixed for v4 and v6 by changing dccp_hdr_seq to take a struct dccp_hdr as argument. Verified that the correct sequence number is now reported in the error handler. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 22 10月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
Now that we have this new macro, use it where possible. Signed-off-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 10月, 2007 1 次提交
-
-
由 Herbert Xu 提交于
With all the users of the double pointers removed from the IPv6 input path, this patch converts all occurances of sk_buff ** to sk_buff * in IPv6 input handlers. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2007 3 次提交
-
-
由 Gerrit Renker 提交于
This fixes two bugs in processing of connection-Requests in v{4,6}_conn_request: 1. Due to using the variable `reset_code', the Reset code generated internally by dccp_parse_options() is overwritten with the initialised value ("Too Busy") of reset_code, which is not what is intended. 2. When receiving a connection-Request on a multicast or broadcast address, no Reset should be generated, to avoid storms of such packets. Instead of jumping to the `drop' label, the v{4,6}_conn_request functions now return 0. Below is why in my understanding this is correct: When the conn_request function returns < 0, then the caller, dccp_rcv_state_process(), returns 1. In all instances where dccp_rcv_state_process is called (dccp_v4_do_rcv, dccp_v6_do_rcv, and dccp_child_process), a return value of != 0 from dccp_rcv_state_process() means that a Reset is generated. If on the other hand the conn_request function returns 0, the packet is discarded and no Reset is generated. Note: There may be a related problem when sending the Response, due to the following. if (dccp_v6_send_response(sk, req, NULL)) goto drop_and_free; /* ... */ drop_and_free: return -1; In this case, if send_response fails due to transmission errors, the next thing that is generated is a Reset with a code "Too Busy". I haven't been able to conjure up such a condition, but it might be good to change the behaviour here also (not done by this patch). Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This factors code common to dccp_v{4,6}_ctl_send_reset into a separate function, and adds support for filling in the Data 1 ... Data 3 fields from RFC 4340, 5.6. It is useful to have this separate, since the following Reset codes will always be generated from the control socket rather than via dccp_send_reset: * Code 3, "No Connection", cf. 8.3.1; * Code 4, "Packet Error" (identification for Data 1 added); * Code 5, "Option Error" (identification for Data 1..3 added, will be used later); * Code 6, "Mandatory Error" (same as Option Error); * Code 7, "Connection Refused" (what on Earth is the difference to "No Connection"?); * Code 8, "Bad Service Code"; * Code 9, "Too Busy"; * Code 10, "Bad Init Cookie" (not used). Code 0 is not recommended by the RFC, the following codes would be used in dccp_send_reset() instead, since they all relate to an established DCCP connection: * Code 1, "Closed"; * Code 2, "Aborted"; * Code 11, "Aggression Penalty" (12.3). Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
This replaces normal addition with mod-48 addition so that sequence number wraparound is respected. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
- 11 7月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Based on <draft-ietf-ipv6-deprecate-rh0-00.txt>. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2007 1 次提交
-
-
由 David S. Miller 提交于
The current IPSEC rule resolution behavior we have does not work for a lot of people, even though technically it's an improvement from the -EAGAIN buisness we had before. Right now we'll block until the key manager resolves the route. That works for simple cases, but many folks would rather packets get silently dropped until the key manager resolves the IPSEC rules. We can't tell these folks to "set the socket non-blocking" because they don't have control over the non-block setting of things like the sockets used to resolve DNS deep inside of the resolver libraries in libc. With that in mind I coded up the patch below with some help from Herbert Xu which provides packet-drop behavior during larval state resolution, controllable via sysctl and off by default. This lays the framework to either: 1) Make this default at some point or... 2) Move this logic into xfrm{4,6}_policy.c and implement the ARP-like resolution queue we've all been dreaming of. The idea would be to queue packets to the policy, then once the larval state is resolved by the key manager we re-resolve the route and push the packets out. The packets would timeout if the rule didn't get resolved in a certain amount of time. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2007 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2007 1 次提交
-
-
由 David S. Miller 提交于
Do this even for non-blocking sockets. This avoids the silly -EAGAIN that applications can see now, even for non-blocking sockets in some cases (f.e. connect()). With help from Venkat Tekkirala. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2006 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
That accumulated over the last months hackaton, shame on me for not using git-apply whitespace helping hand, will do that from now on. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
- 03 12月, 2006 17 次提交
-
-
由 Gerrit Renker 提交于
This reaps the benefit of the earlier patch, which changed the type of CCID 3 states to use enums, in that many conditions are now simplified and the number of possible (unexpected) values is greatly reduced. In a few instances, this also allowed to simplify pre-conditions; where care has been taken to retain logical equivalence. [DCCP]: Introduce a consistent BUG/WARN message scheme This refines the existing set of DCCP messages so that * BUG(), BUG_ON(), WARN_ON() have meaningful DCCP-specific counterparts * DCCP_CRIT (for severe warnings) is not rate-limited * DCCP_WARN() is introduced as rate-limited wrapper Using these allows a faster and cleaner transition to their original counterparts once the code has matured into a full DCCP implementation. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Arnaldo Carvalho de Melo 提交于
Spotted by Ian McDonald, tentatively fixed by Gerrit Renker: http://www.mail-archive.com/dccp%40vger.kernel.org/msg00599.html Rewritten not to unroll sk_receive_skb, in the common case, i.e. no lock debugging, its optimized away. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Based on implementation by Rick Payne. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This patch does not change code; it performs some trivial clean/tidy-ups: * removal of a `debug_prefix' string in favour of the already existing dccp_role(sk) * add documentation of structures and constants * separated out the cases for invalid packets (step 1 of the packet validation) * removing duplicate statements * combining declaration & initialisation Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
Throughout the TCP/DCCP (and tunnelling) code, it often happens that the return code of a transmit function needs to be tested against NET_XMIT_CN which is a value that does not indicate a strict error condition. This patch uses a macro for these recurring situations which is consistent with the already existing macro net_xmit_errno, saving on duplicated code. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This * resolves a FIXME - DCCPv6 connections started all with an initial sequence number of 1; * provides a redirection `secure_dccpv6_sequence_number' in case the init_sequence_v6 code should be updated later; * concentrates the update of S.GAR into dccp_connect_init(); * removes a duplicate dccp_update_gss() in ipv4.c; * uses inet->dport instead of usin->sin_port, due to the following assignment in dccp_v4_connect(): inet->dport = usin->sin_port; Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This patch removes the following redundancies: 1) The test skb->protocol == htons(ETH_P_IPV6) in dccp_v6_init_sequence is always true since * dccp_v6_conn_request() is the only calling function * dccp_v6_conn_request() redirects all skb's with ETH_P_IP to dccp_v4_conn_request() 2) The first argument, `struct sock *sk', of dccp_v{4,6}_init_sequence() is never used. (This is similar for tcp_v{4,6}_init_sequence, an analogous patch has been submitted to netdev and merged.) By the way - are the `sport' / `dport' arguments in the right order? I have made them consistent among calls but they seem to be in the reverse order. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This patch does the following: a) introduces variable-length checksums as specified in [RFC 4340, sec. 9.2] b) provides necessary socket options and documentation as to how to use them c) basic support and infrastructure for the Minimum Checksum Coverage feature [RFC 4340, sec. 9.2.1]: acceptability tests, user notification and user interface In addition, it (1) fixes two bugs in the DCCPv4 checksum computation: * pseudo-header used checksum_len instead of skb->len * incorrect checksum coverage calculation based on dccph_x (2) removes dccp_v4_verify_checksum() since it reduplicates code of the checksum computation; code calling this function is updated accordingly. (3) now uses skb_checksum(), which is safer than checksum_partial() if the sk_buff has is a non-linear buffer (has pages attached to it). (4) fixes an outstanding TODO item: * If P.CsCov is too large for the packet size, drop packet and return. The code has been tested with applications, the latest version of tcpdump now comes with support for partial DCCP checksums. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
Sorts out the comments for processing steps 2,3 in section 8.5 of RFC 4340. All comments have been updated against this document, and the reference to step 2 has been made consistent throughout the files. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This is a code simplification to remove reduplicated code by concentrating and abstracting shared code. Detailed Changes:
-
由 Gerrit Renker 提交于
This does the same for ipv6.c as the preceding one does for ipv4.c: Only the inet_connection_sock_af_ops forward declarations remain, since at least dccp_ipv6_mapped has a circular dependency to dccp_v6_request_recv_sock. No code change, merely re-ordering. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This patch removes two functions, the send_ack functions of request_sock, which are not called/used by the DCCP code. It is correct that these functions are not called, below is a justification why calling these functions (on a passive socket in the LISTEN/RESPOND state) would mean a DCCP protocol violation. A) Background: using request_sock in TCP:
-
由 Gerrit Renker 提交于
This is a code simplification and was singled out from the DCCPv6 Oops patch on http://www.mail-archive.com/dccp@vger.kernel.org/msg00600.html It mainly makes the code consistent between ipv{4,6}.c for the functions dccp_v4_rcv dccp_v6_rcv and removes the do_time_wait label to simplify code somewhat. Commiter note: fixed up a compile problem, trivial. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This is a code simplification: it combines three often recurring operations into one inline function, * allocate `len' bytes header space in skb * fill these `len' bytes with zeroes * cast the start of this header space as dccp_hdr Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This refers to the possible memory leak pointed out in http://www.mail-archive.com/dccp@vger.kernel.org/msg00574.html, fixed by David Miller in http://www.mail-archive.com/netdev@vger.kernel.org/msg24881.html and adds a FIXME to point out where code is missing. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
- 22 11月, 2006 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
TCP and RAW do not have this issue. Closes Bug #7432. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 10月, 2006 1 次提交
-
-
由 Gerrit Renker 提交于
Updates the references to spec documents throughout the code, taking into account that * the DCCP, CCID 2, and CCID 3 drafts all became RFCs in March this year * RFC 1063 was obsoleted by RFC 1191 * draft-ietf-tcpimpl-pmtud-0x.txt was published as an Informational RFC, RFC 2923 on 2000-09-22. All references verified. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 10月, 2006 2 次提交
-
-
由 David S. Miller 提交于
Based upon a patch from Jesper Juhl. Try to match the TCP IPv6 code this was copied from as much as possible, so that it's easy to see where to add the ipv6 pktoptions support code. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
I think I got the cause for the Oops observed in http://www.mail-archive.com/dccp@vger.kernel.org/msg00578.html The problem is always with applications listening on PF_INET6 sockets. Apart from the mentioned oops, I observed another one one, triggered at irregular intervals via timer interrupt: run_timer_softirq -> dccp_keepalive_timer -> inet_csk_reqsk_queue_prune -> reqsk_free -> dccp_v6_reqsk_destructor The latter function is the problem and is also the last function to be called in said kernel panic. In any case, there is a real problem with allocating the right request_sock which is what this patch tackles. It fixes the following problem: - application listens on PF_INET6 - DCCPv4 packet comes in, is handed over to dccp_v4_do_rcv, from there to dccp_v4_conn_request Now: socket is PF_INET6, packet is IPv4. The following code then furnishes the connection with IPv6 - request_sock operations: req = reqsk_alloc(sk->sk_prot->rsk_prot); The first problem is that all further incoming packets will get a Reset since the connection can not be looked up. The second problem is worse: --> reqsk_alloc is called instead of inet6_reqsk_alloc --> consequently inet6_rsk_offset is never set (dangling pointer) --> the request_sock_ops are nevertheless still dccp6_request_ops --> destructor is called via reqsk_free --> dccp_v6_reqsk_destructor tries to free random memory location (inet6_rsk_offset not set) --> panic I have tested this for a while, DCCP sockets are now handled correctly in all three scenarios (v4/v6 only/v4-mapped). Commiter note: I've added the dccp_request_sock_ops forward declaration to keep the tree building and to reduce the size of the patch for 2.6.19, later I'll move the functions to the top of the affected source code to match what we have in the TCP counterpart, where this problem hasn't existed in the first place, dumb me not to have done the same thing on DCCP land 8) Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
- 12 10月, 2006 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-