There are two types of 1FGT devices supported in wacom_wac.c.
Changing them to follow the existing touchscreen format, i.e.,
only report BTN_TOUCH as a valid tool type.

Touch data will be ignored if pen is in proximity. This requires
a touch up event sent if touch was down when pen comes in. The
touch up event should be sent before any pen events are emitted.
Otherwise, two pointers would race for the cursor.

However, we can not send a touch up inside wacom_tpc_pen since
pen and touch are on different logical port. That is why we
have to check if touch is up before sending pen events.
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Reviewed-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

So it would be easier for patch reviewers to follow the data path.
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Reviewed-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

2FGT Tablet PC touch events were processed in _TAP_ format. Remove
them so we can change to _MT_ format.
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The mxt_check_matrix_size() is currently setting the CTE mode to match
xline/yline information that is in the platform data, but it does not
take into account for example the fact that we could have a key array
in use too (key array would use some x/y lines as well).

It would be better to simply rely on the configuration data, and make
sure that the CTE mode set in there matches the touch object (touchscreen,
key array, proximity) configuration (which are set in the config data too).
Signed-off-by: NIiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The MCS50XX series has a HW bug that requires explicit chip power down.
If chip is not powered down before shutting the system down the control
pins (powerup, interrupt) are pulled up and residue current continues
flowing into the chips making them continue consuming power.
Signed-off-by: NHeungjun Kim <riverful.kim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This adds support for system-level suspend/resume to the driver.
Signed-off-by: NHeungjun Kim <riverful.kim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Enable Runtime PM functionality in OMAP4 driver based on the following
assumptions:

- keyboard controller in wakeup domain so it is always on and power
  impact is minimal;
- in OMAP4 the device control is at module/device level and ick/fclk
  level control is difficult so cutting of clocks will prevent
  interrupts.
Signed-off-by: NAbraham Arce <x0066660@ti.com>
Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The test here is reversed. It should be if (IS_ERR()) instead of
if (!IS_ERR()).
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Different board have different requirements/setups so let's be more
flexible.
Signed-off-by: NIiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

As there is no common configuration settings that would work in every
situation, remove the fixed config data from driver code and add
config data to platform data.
Signed-off-by: NIiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

"mXT224" is used in the Intel mid firmware in SFI tables to identify the
presence of this I2C device.
Signed-off-by: NChris Leech <christopher.leech@linux.intel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is a general move to convert drivers to dev_pm_ops rather than bus
specific PM ops in order to facilitate core development. Do this converison
for synaptics-i2c.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The adxl34x SPI driver has what appears to be a typo referring to the
device as adx134x with the numeral 1 rather than letter l. This appears
to be an error so convert.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is a general move to convert drivers to use dev_pm_ops rather than
bus specific ones in order to facilitate core development. Do this
conversion for adxl34x-spi.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is a general move to convert drivers to use dev_pm_ops rather than
bus specific ones in order to facilitate core development. Do this
conversion for adxl34x-i2c.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is a general move to convert drivers to use dev_pm_ops rather than
bus specific ops to facilitate core work. Do this conversion for max7359.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is a general move away from bus specific PM operations to using
dev_pm_ops in order to facilicate core improvements. Update lm8323 to
the new model.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is a general move to convert drivers to use dev_pm_ops rather than
bus specific PM operations in order to facilitate core work. Do this
conversion for ad714x-spi.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is a general move to convert drivers to use dev_pm_ops rather than
bus specific PM operations in order to facilitate core work. Do this
conversion for ad714x-i2c.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Instead of open-coding copying of data structures from userspace use
memdup_user() and strndup_user(). Note that this introduces change in
behavior because driver used to truncate 'phys' longer than 1024 bytes,
but now it will refuse to set 'phys' that long. Arguably trying to set
such 'phys' is suspect anyways.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The check for non-empty device name was botched since we tried to account
for extra space for the terminating zero at the same time. Convert to
kstrndup() to avoid this problem.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Acked-by: NAristeu Rozanski <aris@ruivo.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Read the whole message, as reading just the first byte isn't always
guaranteed to clear the message.
Signed-off-by: NIiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Change prefixes from qt602240 to mxt to reflect that the driver supports
whole line of mXT touchscreens.
Signed-off-by: NIiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Since the driver will be supporting whole range of Atmels mXT touchscreen
controllers we better rename it to atmel_mxt_ts.
Acked-by: NIiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

All users of old style get/setkeycode methids have been converted so
it is time to retire them.
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

While being applied the driver was modified to add use of the ternary
operator. Write the conditionals out longhand as I find it terribly
unhelpful for legibility.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: NFSv4 readdir loses entries
  NFS: Micro-optimize nfs4_decode_dirent()
  NFS: Fix an NFS client lockdep issue
  NFS construct consistent co_ownerid for v4.1
  NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount
  NFS improve pnfs_put_deviceid_cache debug print
  NFS fix cb_sequence error processing
  NFS do not find client in NFSv4 pg_authenticate
  NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!"
  NFS: Prevent memory allocation failure in nfsacl_encode()
  NFS: nfsacl_{encode,decode} should return signed integer
  NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"
  NFS: Fix "kernel BUG at fs/aio.c:554!"
  NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds().
  NFS: fix handling of malloc failure during nfs_flush_multi()

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: smp_on_up: allow non-ARM SMP processors
  ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
  ARM: initrd: disable initrd if passed address overlaps reserved region
  ARM: footbridge: fix debug macros
  ARM: mmci: round down the bytes transferred on error
  ARM: mmci: complete the transaction on error
  ARM: 6642/1: mmci: calculate remaining bytes at error correctly

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
  arm: omap2: mux: fix compile warning
  omap1: Simplify use of omap_irq_flags
  omap2+: Fix unused variable warning for omap_irq_base

Fix kernel-doc warning in kernel.h from commit 7ef88ad5
("BUILD_BUG_ON: make it handle more cases"):

  Warning(include/linux/kernel.h:605): No description found for parameter 'condition'
  Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: xfs_bmap_add_extent_delay_real should init br_startblock
  xfs: fix dquot shaker deadlock
  xfs: handle CIl transaction commit failures correctly
  xfs: limit extsize to size of AGs and/or MAXEXTLEN
  xfs: prevent extsize alignment from exceeding maximum extent size
  xfs: limit extent length for allocation to AG size
  xfs: speculative delayed allocation uses rounddown_power_of_2 badly
  xfs: fix efi item leak on forced shutdown
  xfs: fix log ticket leak on forced shutdown.

Patches should keep coming through Rusty but it helps if I'm Cc'd as
well.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits)
  usb: gadget: composite: avoid access beyond array max length
  USB: serial: handle Data Carrier Detect changes
  USB: gadget: Fix endpoint representation in ci13xxx_udc
  USB: gadget: Fix error path in ci13xxx_udc gadget probe function
  usb: pch_udc: Fix the worning log issue at gadget driver remove
  USB: serial: Updated support for ICOM devices
  USB: ehci-mxc: add work-around for efika mx/sb bug
  USB: unbreak ehci-mxc on otg port of i.MX27
  drivers: update to pl2303 usb-serial to support Motorola cables
  USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products
  USB serial: add missing .usb_driver field in serial drivers
  USB: ehci-fsl: Fix 'have_sysif_regs' detection
  USB: g_printer: fix bug in module parameter definitions
  USB: g_printer: fix bug in unregistration
  USB: uss720: remove duplicate USB device
  MAINTAINERS: add ueagle-atm entry
  USB: EHCI: fix DMA deallocation bug
  USB: pch_udc: support new device ML7213 IOH
  usb: pch_udc: Fixed issue which does not work with g_serial
  usb: set ep_dev async suspend should be later than device_initialize
  ...

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits)
  staging: r8712u: Add new device IDs
  staging: brcm80211: fix suspend/resume issue in brcmsmac
  staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel
  Staging: iio: Aditional fixpoint formatted output bugfix
  staging: usbip: vhci: use urb->dev->portnum to find port
  staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
  staging: usbip: vhci: friendly log messages for connection errors
  staging: usbip: vhci: refuse to enqueue for dead connections
  staging: usbip: vhci: give back URBs from in-flight unlink requests
  staging: usbip: vhci: update reference count for usb_device
  staging: usbip: stub: update refcounts for devices and interfaces
  staging: tidspbridge: replace mbox callback with notifier_call
  staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
  Staging: speakup: &&/|| confusion in silent_store()
  iio: Fixpoint formatted output bugfix
  staging: rt2860: Fix incorrect netif_stop_queue usage warning
  staging: r8712u: Fix memory leak in firmware loading
  staging: tidspbridge: configure full L1 MMU range
  staging: rt2870sta: Add ID for Linksys WUSB100v2
  Staging: xgfib: put parenthesis in the right place
  ...

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty/serial: fix apbuart build
  n_hdlc: fix read and write locking
  serial: unbreak billionton CF card
  tty: use for_each_console() and WARN() on sysfs failures
  vt: fix issue when fbcon wants to takeover a second time.

Fix up trivial conflict in drivers/tty/tty_io.c

Allow non-ARM SMP processors to use the SMP_ON_UP feature.  CPUs
supporting SMP must have the new CPU ID format, so check for this first.
Then check for ARM11MPCore, which fails the MPIDR check.  Lastly check
the MPIDR reports multiprocessing extensions and that the CPU is part of
a multiprocessing system.

Cc: <stable@kernel.org>
Reported-and-Tested-by: NStephen Boyd <sboyd@codeaurora.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>