- 21 10月, 2015 2 次提交
-
-
由 Yuchung Cheng 提交于
Currently ca_seq_rtt_us does not use Kern's check. Fix that by checking if any packet acked is a retransmit, for both RTT used for RTT estimation and congestion control. Fixes: 5b08e47c ("tcp: prefer packet timing to TS-ECR for RTT") Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-19 This series contains updates to i40e and i40evf only. Kiran adds a spinlock around code accessing VSI MAC filter list to ensure that we are synchronizing access to the filter list, otherwise we can end up with multiple accesses at the same time which can cause the VSI MAC filter list to get in an unstable or corrupted state. Jesse fixes overlong BIT defines, where the RSS enabling call were mistakenly missed. Also fixes a bug where the enable function was enabling the interrupt twice while trying to update the two interrupt throttle rate thresholds for Rx and Tx, while refactoring the IRQ enable function to simplify reading the flow. Addressed the high CPU utilization of some small streaming workloads that the driver should reduce CPU in. Anjali fixes two X722 issues with respect to EEPROM checksum verify and reading NVM version info. Fixed where a mask value was accidentally replaced with a bit mask causing Flow Director sideband to be broken. Alex Duyck fixes areas of the drivers which run from hard interrupt context or with interrupts already disabled in netpoll, so use napi_schedule_irqoff() instead of napi_schedule(). Mitch fixes the VF drivers to not easily give up when it is not able to communicate with the PF driver. Carolyn fixes a problem where our tools MAC loopback test, after driver unbind would fail because the hardware was configured for multiqueue and unbind operation did not clear this configuration. Also fixed a issue where the NVMUpdate tool gets bad data from the PHY when using the PHY NVM feature because of contention on the MDIO interface from getting PHY capability calls from the driver during regular operations. Catherine fixed an issue where we were checking if autoneg was allowed to change before checking if autoneg was changing, these checks need to be in the reverse order. Jean Sacren fixes up an function header comment to align the kernel-docs with the actual code. v2: Cleaned up the use of spin_is_locked() in patch 1 based on feedback from David Miller, since it always evaluates to zero on uni-processor builds ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 10月, 2015 19 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Catherine Sullivan 提交于
Bump. Change-ID: Id0a7ecaa491f88ce94c9eba4901e592a56044ee0 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jean Sacren 提交于
'err' would be overwritten immediately, so we should declare it only rather than initialize it to zero. Signed-off-by: NJean Sacren <sakiwit@gmail.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jean Sacren 提交于
The second argument name in the kernel-doc argument list for i40e_features_check() was slightly off. Fix it for the kernel doc. Signed-off-by: NJean Sacren <sakiwit@gmail.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
There is an error coming back from get_phy_capabilities that does not seem to have any functional implications. We will continue looking into why this error message is occurring, but in the meantime, we will move it to debug to avoid confusion. Change-ID: I9091754bf62c066ddedeb249923d85606e2d68ed Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
We were previously checking if autoneg was allowed to change before checking if autoneg was changing. We need to do this in the other order or else we will erroneously return EINVAL when autoneg is not changing. Change-ID: Iff9f7d1c9bddc1ad1e5d227d4f42754f90155410 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
A mask value of 0x1FF was accidentally replaced with a bit mask causing flow director sideband to be broken. Change-ID: Id3387f67dd1b567b41692b570b383c58671e1eae Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes a problem where the NVMUpdate Tool, when using the PHY NVM feature, gets bad data from the PHY because of contention on the MDIO interface from get PHY capability calls from the driver during regular operations. The problem is fixed by adding a check if media is available before calling get PHY capability function because that bit is not set when device is in PHY interaction mode. Change-ID: Ib89991b0f841808dd92410f5e8683d6ee3301cd0 Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes a problem where our Tools MAC Loopback test, after driver unbind would fail. This was because the hw was configured for multiqueue and unbind operation did not clear this configuration. The problem is fixed by resetting this configuration in i40e_remove. Change-ID: I130c05138319182ed1476d3a0b5222d6a6320af9 Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The adaptive ITR (interrupt throttle rate) algorithm was adjusting the hardware's interrupt rate too frequently. This caused a lot of variation in the interrupt rate for fairly constant workloads. Change the code to have a counter and adjust only once every N number of interrupts. Change-ID: I0460f1f86571037484eca5aca36ac4d889cb8389 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The dynamic algorithm, while now working, doesn't have good performance in 40G mode. One part of this patch addresses the high CPU utilization of some small streaming workloads that the driver should reduce CPU in. It also changes the minimum ITR that the dynamic algorithm will settle on, causing our minimum latency to go from 12us to about 14us, when using adaptive mode. It also changes the BULK interrupt rate to allow maximum throughput on a 40Gb connection with a single thread of transmit, clamping interrupt rate to 8000 for TX makes single thread traffic go too slow. The new ULTRA bulk setting is introduced and is used when the Rx packet rate on this queue exceeds 40000 packets per second. This value of 40000 was chosen because the automatic tuning of minimum ITR=20us means that a single queue can't quite achieve that many packets per second from a round-robin test. Change-ID: Icce8faa128688ca5fd2c4229bdd9726877a92ea2 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The driver was using a value expressed in 2us increments for the divisor to figure out our bytes/usec values. Fix the usecs variable to contain a value in microseconds. Change-ID: I5c20493103c295d6f201947bb908add7040b7c41 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
This change moves a multi-line register setting into a function which simplifies reading the flow of the enable function. This also fixes a bug where the enable function was enabling the interrupt twice while trying to update the two interrupt throttle rate thresholds for Rx and Tx. Change-ID: Ie308f9d0d48540204590cb9d7a5a7b1196f959bb Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
When the VF driver is unable to communicate with the PF, it just gives up and never tries again. Aside from the obvious character flaw that this shows, it's also a lousy user experience. When PF communications fail, wait five seconds, and try again. And again. Don't give up, little VF driver! Your prince will come! Change-ID: Ia1378a39879883563b8faffce819f375821f9585 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
The i40e_intr and i40e/i40evf_msix_clean_rings functions run from hard interrupt context or with interrupts already disabled in netpoll. They can use napi_schedule_irqoff() instead of napi_schedule() Signed-off-by: NAlexander Duyck <aduyck@mirantis.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai 提交于
Acquire NVM, before issuing an AQ read nvm command for X722. We need to acquire the NVM before issuing an AQ read to the NVM otherwise we will get EBUSY from the FW. Also release when done. This fixes the two X722 issues with respect to eeprom checksum verify and reading NVM version info. With this patch in place, i40e driver will provide basic support for X722 devices. Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The defines from the RSS enabling call were mistakenly missed in the patches to the i40e which should have been to i40evf as well. This is a follow up to (commit ed921559886dd40528) "fix 32 bit build warnings". Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kiran Patil 提交于
This patch introduces a spinlock which is to be used for synchronizing access to VSI's MAC filter list. This patch also synchronizes execution of other codepaths which are accessing VSI's MAC filter list with execution of service_task:sync_vsi_filters. In function i40e_add_vsi, copied out LAA MAC address instead of cloning MAC filter entry because only MAC address is needed to remove MAC VLAN filter from FW/HW. Change-ID: I0e10ac7c715d44aa994239642aa4d57c998573a2 Signed-off-by: NKiran Patil <kiran.patil@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Account for extra headroom in ath9k driver, from Felix Fietkau. 2) Fix OOPS in pppoe driver due to incorrect socket state transition, from Guillaume Nault. 3) Kill memory leak in amd-xgbe debugfx, from Geliang Tang. 4) Power management fixes for iwlwifi, from Johannes Berg. 5) Fix races in reqsk_queue_unlink(), from Eric Dumazet. 6) Fix dst_entry usage in ARP replies, from Jiri Benc. 7) Cure OOPSes with SO_GET_FILTER, from Daniel Borkmann. 8) Missing allocation failure check in amd-xgbe, from Tom Lendacky. 9) Various resource allocation/freeing cures in DSA< from Neil Armstrong. 10) A series of bug fixes in the openvswitch conntrack support, from Joe Stringer. 11) Fix two cases (BPF and act_mirred) where we have to clean the sender cpu stored in the SKB before transmitting. From WANG Cong and Alexei Starovoitov. 12) Disable VLAN filtering in promiscuous mode in mlx5 driver, from Achiad Shochat. 13) Older bnx2x chips cannot do 4-tuple UDP hashing, so prevent this configuration via ethtool. From Yuval Mintz. 14) Don't call rt6_uncached_list_flush_dev() from rt6_ifdown() when 'dev' is NULL, from Eric Biederman. 15) Prevent stalled link synchronization in tipc, from Jon Paul Maloy. 16) kcalloc() gstrings ethtool buffer before having driver fill it in, in order to prevent kernel memory leaking. From Joe Perches. 17) Fix mixxing rt6_info initialization for blackhole routes, from Martin KaFai Lau. 18) Kill VLAN regression in via-rhine, from Andrej Ota. 19) Missing pfmemalloc check in sk_add_backlog(), from Eric Dumazet. 20) Fix spurious MSG_TRUNC signalling in netlink dumps, from Ronen Arad. 21) Scrube SKBs when pushing them between namespaces in openvswitch, from Joe Stringer. 22) bcmgenet enables link interrupts too early, fix from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits) net: bcmgenet: Fix early link interrupt enabling tunnels: Don't require remote endpoint or ID during creation. openvswitch: Scrub skb between namespaces xen-netback: correctly check failed allocation net: asix: add support for the Billionton GUSB2AM-1G-B USB adapter netlink: Trim skb to alloc size to avoid MSG_TRUNC net: add pfmemalloc check in sk_add_backlog() via-rhine: fix VLAN receive handling regression. ipv6: Initialize rt6_info properly in ip6_blackhole_route() ipv6: Move common init code for rt6_info to a new function rt6_info_init() Bluetooth: Fix initializing conn_params in scan phase Bluetooth: Fix conn_params list update in hci_connect_le_scan_cleanup Bluetooth: Fix remove_device behavior for explicit connects Bluetooth: Fix LE reconnection logic Bluetooth: Fix reference counting for LE-scan based connections Bluetooth: Fix double scan updates mlxsw: core: Fix race condition in __mlxsw_emad_transmit tipc: move fragment importance field to new header position ethtool: Use kcalloc instead of kmalloc for ethtool_get_strings tipc: eliminate risk of stalled link synchronization ...
-
- 19 10月, 2015 19 次提交
-
-
由 Florian Fainelli 提交于
Link interrupts are enabled in init_umac(), which is too early for us to process them since we do not yet have a valid PHY device pointer. On BCM7425 chips for instance, we will crash calling phy_mac_interrupt() because phydev is NULL. Fix this by moving the link interrupts enabling in bcmgenet_netif_start(), under a specific function: bcmgenet_link_intr_enable() and while at it, update the comments surrounding the code. Fixes: 6cc8e6d4 ("net: bcmgenet: Delay PHY initialization to bcmgenet_open()") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-for-davem-2015-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi: * mvm: flush fw_dump_wk when mvm fails to start * mvm: init card correctly on ctkill exit check * pci: add a few more PCI subvendor IDs for the 7265 series * fix firmware filename for 3160 * mvm: clear csa countdown when AP is stopped * mvm: fix D3 firmware PN programming * dvm: fix D3 firmware PN programming * mvm: fix D3 CCMP TX PN assignment rtlwifi: * rtl8821ae: Fix system lockups on boot ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. Most relevantly, updates for the nfnetlink_log to integrate with conntrack, fixes for cttimeout and improvements for nf_queue core, they are: 1) Remove useless ifdef around static inline function in IPVS, from Eric W. Biederman. 2) Simplify the conntrack support for nfnetlink_queue: Merge nfnetlink_queue_ct.c file into nfnetlink_queue_core.c, then rename it back to nfnetlink_queue.c 3) Use y2038 safe timestamp from nfnetlink_queue. 4) Get rid of dead function definition in nf_conntrack, from Flavio Leitner. 5) Attach conntrack support for nfnetlink_log.c, from Ken-ichirou MATSUZAWA. This adds a new NETFILTER_NETLINK_GLUE_CT Kconfig switch that controls enabling both nfqueue and nflog integration with conntrack. The userspace application can request this via NFULNL_CFG_F_CONNTRACK configuration flag. 6) Remove unused netns variables in IPVS, from Eric W. Biederman and Simon Horman. 7) Don't put back the refcount on the cttimeout object from xt_CT on success. 8) Fix crash on cttimeout policy object removal. We have to flush out the cttimeout extension area of the conntrack not to refer to an unexisting object that was just removed. 9) Make sure rcu_callback completion before removing nfnetlink_cttimeout module removal. 10) Fix compilation warning in br_netfilter when no nf_defrag_ipv4 and nf_defrag_ipv6 are enabled. Patch from Arnd Bergmann. 11) Autoload ctnetlink dependencies when NFULNL_CFG_F_CONNTRACK is requested. Again from Ken-ichirou MATSUZAWA. 12) Don't use pointer to previous hook when reinjecting traffic via nf_queue with NF_REPEAT verdict since it may be already gone. This also avoids a deadloop if the userspace application keeps returning NF_REPEAT. 13) A bunch of cleanups for netfilter IPv4 and IPv6 code from Ian Morris. 14) Consolidate logger instance existence check in nfulnl_recv_config(). 15) Fix broken atomicity when applying configuration updates to logger instances in nfnetlink_log. 16) Get rid of the .owner attribute in our hook object. We don't need this anymore since we're dropping pending packets that have escaped from the kernel when unremoving the hook. Patch from Florian Westphal. 17) Remove unnecessary rcu_read_lock() from nf_reinject code, we always assume RCU read side lock from .call_rcu in nfnetlink. Also from Florian. 18) Use static inline function instead of macros to define NF_HOOK() and NF_HOOK_COND() when no netfilter support in on, from Arnd Bergmann. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Sowmini found hang with rds-ping while testing RDS over TCP. Its a corner case and doesn't happen always. The issue is not reproducible with IB transport. Its clear from below dump why we see it with RDS TCP. [<ffffffff8153b7e5>] do_tcp_setsockopt+0xb5/0x740 [<ffffffff8153bec4>] tcp_setsockopt+0x24/0x30 [<ffffffff814d57d4>] sock_common_setsockopt+0x14/0x20 [<ffffffffa096071d>] rds_tcp_xmit_prepare+0x5d/0x70 [rds_tcp] [<ffffffffa093b5f7>] rds_send_xmit+0xd7/0x740 [rds] [<ffffffffa093bda2>] rds_send_pong+0x142/0x180 [rds] [<ffffffffa0939d34>] rds_recv_incoming+0x274/0x330 [rds] [<ffffffff810815ae>] ? ttwu_queue+0x11e/0x130 [<ffffffff814dcacd>] ? skb_copy_bits+0x6d/0x2c0 [<ffffffffa0960350>] rds_tcp_data_recv+0x2f0/0x3d0 [rds_tcp] [<ffffffff8153d836>] tcp_read_sock+0x96/0x1c0 [<ffffffffa0960060>] ? rds_tcp_recv_init+0x40/0x40 [rds_tcp] [<ffffffff814d6a90>] ? sock_def_write_space+0xa0/0xa0 [<ffffffffa09604d1>] rds_tcp_data_ready+0xa1/0xf0 [rds_tcp] [<ffffffff81545249>] tcp_data_queue+0x379/0x5b0 [<ffffffffa0960cdb>] ? rds_tcp_write_space+0xbb/0x110 [rds_tcp] [<ffffffff81547fd2>] tcp_rcv_established+0x2e2/0x6e0 [<ffffffff81552602>] tcp_v4_do_rcv+0x122/0x220 [<ffffffff81553627>] tcp_v4_rcv+0x867/0x880 [<ffffffff8152e0b3>] ip_local_deliver_finish+0xa3/0x220 This happens because rds_send_xmit() chain wants to take sock_lock which is already taken by tcp_v4_rcv() on its way to rds_tcp_data_ready(). Commit db6526dc ("RDS: use rds_send_xmit() state instead of RDS_LL_SEND_FULL") which was trying to opportunistically finish the send request in same thread context. But because of above recursive lock hang with RDS TCP, the send work from rds_send_pong() needs to deferred to worker to avoid lock up. Given RDS ping is more of connectivity test than performance critical path, its should be ok even for transport like IB. Reported-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
Before lightweight tunnels existed, it really didn't make sense to create a tunnel that was not fully specified, such as without a destination IP address - the resulting packets would go nowhere. However, with lightweight tunnels, the opposite is true - it doesn't make sense to require this information when it will be provided later on by the route. This loosens the requirements for this information. An alternative would be to allow the relaxed version only when COLLECT_METADATA is enabled. However, since there are several variations on this theme (such as NBMA tunnels in GRE), just dropping the restrictions seems the most consistent across tunnels and with the existing configuration. CC: John Linville <linville@tuxdriver.com> Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Add missing rule to export mpls iptunnel header needed by iproute2 Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
At the time of commit fff32699 ("tcp: reflect SYN queue_mapping into SYNACK packets") we had little ways to cope with SYN floods. We no longer need to reflect incoming skb queue mappings, and instead can pick a TX queue based on cpu cooking the SYNACK, with normal XPS affinities. Note that all SYNACK retransmits were picking TX queue 0, this no longer is a win given that SYNACK rtx are now distributed on all cpus. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Stringer 提交于
If OVS receives a packet from another namespace, then the packet should be scrubbed. However, people have already begun to rely on the behaviour that skb->mark is preserved across namespaces, so retain this one field. This is mainly to address information leakage between namespaces when using OVS internal ports, but by placing it in ovs_vport_receive() it is more generally applicable, meaning it should not be overlooked if other port types are allowed to be moved into namespaces in future. Signed-off-by: NJoe Stringer <joestringer@nicira.com> Acked-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth由 David S. Miller 提交于
Johan Hedberg says: ==================== pull request: bluetooth 2015-10-16 First of all, sorry for the late set of patches for the 4.3 cycle. We just finished an intensive week of testing at the Bluetooth UnPlugFest and discovered (and fixed) issues there. Unfortunately a few issues affect 4.3-rc5 in a way that they break existing Bluetooth LE mouse and keyboard support. The regressions result from supporting LE privacy in conjunction with scanning for Resolvable Private Addresses before connecting. A feature that has been tested heavily (including automated unit tests), but sadly some regressions slipped in. The UnPlugFest with its multitude of test platforms is a good battle testing ground for uncovering every corner case. The patches in this pull request focus only on fixing the regressions in 4.3-rc5. The patches look a bit larger since we also added comments in the critical sections of the fixes to improve clarity. I would appreciate if we can get these regression fixes to Linus quickly. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
BITS_RX_EN is an 'unsigned long' constant, so the ones complement of that has bits set that do not fit into a 32-bit variable on 64-bit architectures, which causes a harmless gcc warning: drivers/net/ethernet/hisilicon/hix5hd2_gmac.c: In function 'hix5hd2_port_disable': drivers/net/ethernet/hisilicon/hix5hd2_gmac.c:374:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel_relaxed(~(BITS_RX_EN | BITS_TX_EN), priv->base + PORT_EN); This adds a cast to (u32) to tell gcc that the code is indeed fine. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The HNS MDIO driver fails to build on older ARM machines that are not yet converted to CONFIG_OF: drivers/net/ethernet/hisilicon/hns_mdio.c: In function 'hns_mdio_bus_name': drivers/net/ethernet/hisilicon/hns_mdio.c:405:14: error: 'OF_BAD_ADDR' undeclared (first use in this function) u64 taddr = OF_BAD_ADDR; ^ drivers/net/ethernet/hisilicon/hns_mdio.c:405:14: note: each undeclared identifier is reported only once for each function it appears in drivers/net/ethernet/hisilicon/hns_mdio.c:409:11: error: implicit declaration of function 'of_translate_address' [-Werror=implicit-function-declaration] taddr = of_translate_address(np, addr); ^ This clarifies the dependency to ensure we don't attempt to build these drivers without CONFIG_OF, but also adds a COMPILE_TEST alternative to give us better build coverage testing. Build-tested on x86 as well to ensure this actually works. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
Some configurations fail to build the hns dsaf code because of a missing header file: ethernet/hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_init': ethernet/hisilicon/hns/hns_dsaf_main.c:1096:2: error: implicit declaration of function 'vzalloc' [-Werror=implicit-function-declaration] priv->soft_mac_tbl = vzalloc(sizeof(*priv->soft_mac_tbl) This adds the correct #include. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
yankejian says: ==================== net: hns: fixes two bugs in hns driver This patchset fixes two bugs in hns driver. - fixes timeout when received pause frame from the connective ports - should be set by using ethtool -s when the devices are link down ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 lisheng 提交于
this patch fixes the bug triggered timeout sequence. when the connective ports cannot accept the packets with higher speed, they will send out the pause frame to the Soc's mac. At that time, the driver resets the relevant of the Soc, then it causes the packets cannot be sent out immediately. this patch fixes the issue. Signed-off-by: Nyankejian <yankejian@huawei.com> Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Nlisheng <lisheng011@huawei.com> Signed-off-by: Nlipeng <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chenny Xu 提交于
before this patch, hns driver only permits user to set the net device by using ethtool -s when the device is link up. it is obviously not so good. it needs to be set no matter it is link up or down. so this patch fixes this issue. Signed-off-by: Nyankejian <yankejian@huawei.com> Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Nlisheng <lisheng011@huawei.com> Signed-off-by: Nlipeng <lipeng321@huawei.com> Signed-off-by: NChenny Xu <chenny.xu@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
huangdaode says: ==================== net: hisilicon fix some bugs in HNS drivers This patchset fixes the two bugs in HNS driver, one is remove the hnae sysfs interface according to the review comments from Arnd Bergmann <arnd@arndb.de>, another is fixing the wrong mac_id judgement bug which is found during internal tests. change log: v3: remove the hnae sysfs interface. v2: 1) remove first bug fix, which is fixed in another patch submitted by Arnd Bergmann <arnd@arndb.de> 2) change the code sytyle according to Joe. v1: initial version. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 huangdaode 提交于
This patch fixes the wrong judgement of mac_id when get port num. Signed-off-by: Nhuangdaode <huangdaode@hisilicon.com> Signed-off-by: Nyankejian <yankejian@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 huangdaode 提交于
This patch removes the hns driver hnae sysfs interface according to Arnd's review comments. Signed-off-by: Nhuangdaode <huangdaode@hisilicon.com> Reviewed-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Insu Yun 提交于
Since vzalloc can be failed in memory pressure, writes -ENOMEM to xenstore to indicate error. Signed-off-by: NInsu Yun <wuninsu@gmail.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-