Enable HAVE_DMA_CONTIGUOUS, reserve contiguous memory at bootmem_init,
use dma_alloc_from_contiguous and dma_release_from_contiguous in
xtensa_dma_alloc/free.
This allows for big contiguous DMA buffer allocation from designated
area configured in the device tree.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

externs and defines for stuff that is never used
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

platform_restart implementatations do the same thing to reset CPU.
Don't duplicate that code, move it to a function and call it from
platform_restart.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Memblock is the standard kernel boot-time memory tracker/allocator. Use
it instead of the custom sysmem allocator. This allows using kmemleak,
CMA and device tree memory reservation.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Now that the kernel load address and KSEG physical base address have
their own Kconfig symbols PLATFORM_DEFAULT_MEM seems redundant. It makes
little sense to use it in MMU configurations instead of KSEG_PADDR.
In noMMU configurations there's no explicit KSEG, so it's still useful
for the early cache initialization and definition of ARCH_PFN_OFFSET,
which affects mem_map size.

- limit it to noMMU; MMU variants have XCHAL_KSEG_PADDR and
  XCHAL_KSEG_SIZE;
- don't use it to define TASK_SIZE or MAX_LOW_PFN: first doesn't make
  any difference in noMMU, second is meaningless as there's no high
  memory;
- don't add default physical memory region: memory layout should come
  from the DT, bootloader tags, or memmap= command line parameter.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Make kernel load address explicit, independent of the selected MMU
configuration and configurable from Kconfig. Do not restrict it to the
first 512MB of the physical address space.

Cleanup kernel memory layout macros:

- rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR;
- drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS;
- introduce PHYS_OFFSET and use it in __va and __pa definitions;
- synchronize MMU/noMMU vectors, drop unused NMI vector;
- replace hardcoded vectors offset of 0x3000 with Kconfig symbol.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

MMUv3 is able to support low memory bigger than 128MB.
Implement 256MB and 512MB KSEG layouts:

- add Kconfig selector for KSEG layout;
- add KSEG base address, size and alignment definitions to
  arch/xtensa/include/asm/kmem_layout.h;
- use new definitions in TLB initialization;
- add build time memory map consistency checks.

See Documentation/xtensa/mmu.txt for the details of new memory layouts.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Create a header dedicated to memory layout definitions. Include it from
places where these definitions are needed.
Express vmalloc area address, VIRTUAL_MEMORY_ADDRESS and KERNELOFFSET
through KSEG address.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Make __ffs result type unsigned long to match generic asm
implementation. This fixes the following build warning:

  mm/nobootmem.c: In function '__free_pages_memory':
  include/linux/kernel.h:742:17: warning: comparison of distinct pointer
                                          types lacks a cast
    (void) (&_min1 == &_min2);  \
  		 ^
  mm/nobootmem.c:100:11: note: in expansion of macro 'min'
     order = min(MAX_ORDER - 1UL, __ffs(start));
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Provide macro definitions regardless of whether caches are lockable or
not, make definitions empty in latter case.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

This is the third version of the patchset previously sent [1].  I have
basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get
rid of superfluous gfp flags" which went through dm tree.  I am sending
it now because it is tree wide and chances for conflicts are reduced
considerably when we want to target rc2.  I plan to send the next step
and rename the flag and move to a better semantic later during this
release cycle so we will have a new semantic ready for 4.8 merge window
hopefully.

Motivation:

While working on something unrelated I've checked the current usage of
__GFP_REPEAT in the tree.  It seems that a majority of the usage is and
always has been bogus because __GFP_REPEAT has always been about costly
high order allocations while we are using it for order-0 or very small
orders very often.  It seems that a big pile of them is just a
copy&paste when a code has been adopted from one arch to another.

I think it makes some sense to get rid of them because they are just
making the semantic more unclear.  Please note that GFP_REPEAT is
documented as

* __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt

* _might_ fail.  This depends upon the particular VM implementation.
  while !costly requests have basically nofail semantic.  So one could
  reasonably expect that order-0 request with __GFP_REPEAT will not loop
  for ever.  This is not implemented right now though.

I would like to move on with __GFP_REPEAT and define a better semantic
for it.

  $ git grep __GFP_REPEAT origin/master | wc -l
  111
  $ git grep __GFP_REPEAT | wc -l
  36

So we are down to the third after this patch series.  The remaining
places really seem to be relying on __GFP_REPEAT due to large allocation
requests.  This still needs some double checking which I will do later
after all the simple ones are sorted out.

I am touching a lot of arch specific code here and I hope I got it right
but as a matter of fact I even didn't compile test for some archs as I
do not have cross compiler for them.  Patches should be quite trivial to
review for stupid compile mistakes though.  The tricky parts are usually
hidden by macro definitions and thats where I would appreciate help from
arch maintainers.

[1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org

This patch (of 19):

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.  Yet we
have the full kernel tree with its usage for apparently order-0
allocations.  This is really confusing because __GFP_REPEAT is
explicitly documented to allow allocation failures which is a weaker
semantic than the current order-0 has (basically nofail).

Let's simply drop __GFP_REPEAT from those places.  This would allow to
identify place which really need allocator to retry harder and formulate
a more specific semantic for what the flag is supposed to do actually.

Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Crispin <blogic@openwrt.org>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since all architectures have this implemented now natively, remove this
dead code.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Implement FETCH-OP atomic primitives, these are very similar to the
existing OP-RETURN primitives we already have, except they return the
value of the atomic variable _before_ modification.

This is especially useful for irreversible operations -- such as
bitops (because it becomes impossible to reconstruct the state prior
to modification).
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This patch updates/fixes all spin_unlock_wait() implementations.

The update is in semantics; where it previously was only a control
dependency, we now upgrade to a full load-acquire to match the
store-release from the spin_unlock() we waited on. This ensures that
when spin_unlock_wait() returns, we're guaranteed to observe the full
critical section we waited on.

This fixes a number of spin_unlock_wait() users that (not
unreasonably) rely on this.

I also fixed a number of ticket lock versions to only wait on the
current lock holder, instead of for a full unlock, as this is
sufficient.

Furthermore; again for ticket locks; I added an smp_rmb() in between
the initial ticket load and the spin loop testing the current value
because I could not convince myself the address dependency is
sufficient, esp. if the loads are of different sizes.

I'm more than happy to remove this smp_rmb() again if people are
certain the address dependency does indeed work as expected.

Note: PPC32 will be fixed independently
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: chris@zankel.net
Cc: cmetcalf@mellanox.com
Cc: davem@davemloft.net
Cc: dhowells@redhat.com
Cc: james.hogan@imgtec.com
Cc: jejb@parisc-linux.org
Cc: linux@armlinux.org.uk
Cc: mpe@ellerman.id.au
Cc: ralf@linux-mips.org
Cc: realmz6@gmail.com
Cc: rkuo@codeaurora.org
Cc: rth@twiddle.net
Cc: schwidefsky@de.ibm.com
Cc: tony.luck@intel.com
Cc: vgupta@synopsys.com
Cc: ysato@users.sourceforge.jp
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Since "locking, rwsem: drop explicit memory barriers" the arch specific
code is basically same as the the generic one so we can drop the
superfluous code.
Suggested-by: NDavidlohr Bueso <dave@stgolabs.net>
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMax Filippov <jcmvbkbc@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1460041951-22347-4-git-send-email-mhocko@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

sh and xtensa seem to be the only architectures which use explicit
memory barriers for rw_semaphore operations even though they are not
really needed because there is the full memory barrier is always implied
by atomic_{inc,dec,add,sub}_return() resp. cmpxchg(). Remove them.
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1460041951-22347-3-git-send-email-mhocko@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch updates csum_ipv6_magic so that it correctly recognizes that
protocol is a unsigned 8 bit value.

This will allow us to better understand what limitations may or may not be
present in how we handle the data.  For example there are a number of
places that call htonl on the protocol value.  This is likely not necessary
and can be replaced with a multiplication by ntohl(1) which will be
converted to a shift by the compiler.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch updates all instances of csum_tcpudp_magic and
csum_tcpudp_nofold to reflect the types that are usually used as the source
inputs.  For example the protocol field is populated based on nexthdr which
is actually an unsigned 8 bit value.  The length is usually populated based
on skb->len which is an unsigned integer.

This addresses an issue in which the IPv6 function csum_ipv6_magic was
generating a checksum using the full 32b of skb->len while
csum_tcpudp_magic was only using the lower 16 bits.  As a result we could
run into issues when attempting to adjust the checksum as there was no
protocol agnostic way to update it.

With this change the value is still truncated as many architectures use
"(len + proto) << 8", however this truncation only occurs for values
greater than 16776960 in length and as such is unlikely to occur as we stop
the inner headers at ~64K in size.

I did have to make a few minor changes in the arm, mn10300, nios2, and
score versions of the function in order to support these changes as they
were either using things such as an OR to combine the protocol and length,
or were using ntohs to convert the length which would have truncated the
value.

I also updated a few spots in terms of whitespace and type differences for
the addresses.  Most of this was just to make sure all of the definitions
were in sync going forward.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use perf framework to manage hardware instruction and data breakpoints.
Add two new ptrace calls: PTRACE_GETHBPREGS and PTRACE_SETHBPREGS to
query and set instruction and data breakpoints.
Address bit 0 choose instruction (0) or data (1) break register, bits
31..1 are the register number.
Both calls transfer two 32-bit words: address (0) and control (1).
Instruction breakpoint contorl word is 0 to clear breakpoint, 1 to set.
Data breakpoint control word bit 31 is 'trigger on store', bit 30 is
'trigger on load, bits 29..0 are length. Length 0 is used to clear a
breakpoint. To set a breakpoint length must be a power of 2 in the range
1..64 and the address must be length-aligned.

Introduce new thread_info flag: TIF_DB_DISABLED. Set it if debug
exception is raised by the kernel code accessing watched userspace
address and disable corresponding data breakpoint. On exit to userspace
check that flag and, if set, restore all data breakpoints.

Handle debug exceptions raised with PS.EXCM set. This may happen when
window overflow/underflow handler or fast exception handler hits data
breakpoint, in which case save and disable all data breakpoints,
single-step faulting instruction and restore data breakpoints.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

With implementation of data breakpoints debug exceptions raised when
PS.EXCM is set need to be handled, e.g. window overflow code can write
to watched userspace address. Currently debug exception handler uses
EXCSAVE and DEPC SRs to save temporary registers, but DEPC may not be
available when PS.EXCM is set and more space will be needed to save
additional state.
Reorganize debug context: create per-CPU structure debug_table instance
and store its address in the EXCSAVE<debug level> instead of
debug_exception function address. Expand this structure when more save
space is needed.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

For a long time all architectures implement the pci_dma_* functions using
the generic DMA API, and they all use the same header to do so.

Move this header, pci-dma-compat.h, to include/linux and include it from
the generic pci.h instead of having each arch duplicate this include.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

asm/gpio.h is included only by linux/gpio.h, and then only when the arch
selects ARCH_HAVE_CUSTOM_GPIO_H.  Only the following arches select it: arm
avr32 blackfin m68k (COLDFIRE only) sh unicore32.

Remove the unused asm/gpio.h files for the arches that do not select
ARCH_HAVE_CUSTOM_GPIO_H.

This is a follow-on to 7563bbf8 ("gpiolib/arches: Centralise
bolierplate asm/gpio.h").
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This wasn't an asm-generic header to start with, and can be merged into
dma-mapping.h trivially.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Helge Deller <deller@gmx.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the generic implementation to <linux/dma-mapping.h> now that all
architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now
that everyone supports them.

[valentinrothberg@gmail.com: remove leftovers in Kconfig]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Helge Deller <deller@gmx.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This defines __smp_xxx barriers for xtensa,
for use by virtualization.

smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>

Map physical memory outside KIO region into the vmalloc area.
Unmap it with vunmap.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Do not always use fake NMI when safe, provide Kconfig option instead.
Print a warning if fake NMI is chosen in unsafe configuration, but allow
it, because it may work if the user knows that interrupts with
priorities at or above PMM IRQ are not used. Add a check to NMI handler
that BUGs if any of these IRQs fire.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

This fixes the following build error seen in -next:

  drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c:143:2: error:
  implicit declaration of function 'dma_to_phys'
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

- don't bugcheck if high memory page is passed to xtensa_map_page;
- turn empty dcache flush macros into functions so that they could be
  passed as function parameters;
- use kmap_atomic to map high memory pages for cache invalidation/
  flushing performed by xtensa_sync_single_for_{cpu,device}.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Drop unaligned dcache management functions as they are no longer used.
This reverts commit bd974240 ("xtensa: cache inquiry and
unaligned cache handling functions").
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

There are no .bootstrap or .ResetVector.text sections linked to the
vmlinux image, drop these sections from vmlinux.ld.S. Drop
RESET_VECTOR_VADDR definition only used for .ResetVector.text.

Drop remapped copies of primary and secondary reset vectors, as modern
gdb don't have problems stepping through instructions at arbitrary
locations. Drop corresponding sections from the corresponding linker
scripts.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

There are multiple factors adding to the issue in different
configurations:

- commit 17290231 ("xtensa: add fixup for double exception raised
  in window overflow") added function window_overflow_restore_a0_fixup to
  double exception vector overlapping reset vector location of secondary
  processor cores.
- on MMUv2 cores RESET_VECTOR1_VADDR may point to uncached kernel memory
  making code overlapping depend on cache type and size, so that without
  cache or with WT cache reset vector code overwrites double exception
  code, making issue even harder to detect.
- on MMUv3 cores RESET_VECTOR1_VADDR may point to unmapped area, as
  MMUv3 cores change virtual address map to match MMUv2 layout, but
  reset vector virtual address is given for the original MMUv3 mapping.
- physical memory region of the secondary reset vector is not reserved
  in the physical memory map, and thus may be allocated and overwritten
  at arbitrary moment.

Fix it as follows:

- move window_overflow_restore_a0_fixup code to .text section.
- define RESET_VECTOR1_VADDR so that it points to reset vector in the
  cacheable MMUv2 map for cores with MMU.
- reserve reset vector region in the physical memory map. Drop separate
  literal section and build mxhead.S with text section literals.

Cc: <stable@vger.kernel.org>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

KIO region location is different for noMMU cores. Provide different
default physical address and make KIO virtual address equal to physical.

Move xtensa_get_kio_paddr function close to XCHAL_KIO_PADDR definition
and define it not only for MMUv3, but for all MMU options except MMUv2.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

There's no kernel/user separation in noMMU and PS.RING may not exist.
Even if it exists it should not be used because TLB entries are not set
up for user ring on user pages.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

- make cache-related assembly macros empty if core doesn't have
  corresponding cache type;
- don't initialize cache attributes in instruction/data TLB entries if
  there's no corresponding cache type.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Build-time fixes:
- make lbeg/lend/lcount save/restore conditional on kernel entry;
- don't clear lcount in platform_restart functions unconditionally.

Run-time fixes:
- use correct end of range register in __endla paired with __loopt, not
  the unused temporary register. This fixes .bss zero-initialization.
  Update comments in asmmacro.h;
- don't clobber a10 in the usercopy that leads to access to unmapped
  memory.

Cc: <stable@vger.kernel.org>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

This patch makes sure that atomic_{read,set}() are at least
{READ,WRITE}_ONCE().

We already had the 'requirement' that atomic_read() should use
ACCESS_ONCE(), and most archs had this, but a few were lacking.
All are now converted to use READ_ONCE().

And, by a symmetry and general paranoia argument, upgrade atomic_set()
to use WRITE_ONCE().
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: james.hogan@imgtec.com
Cc: linux-kernel@vger.kernel.org
Cc: oleg@redhat.com
Cc: will.deacon@arm.com
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Almost everyone implements dma_set_mask the same way, although some time
that's hidden in ->set_dma_mask methods.

This patch consolidates those into a common implementation that either
calls ->set_dma_mask if present or otherwise uses the default
implementation.  Some architectures used to only call ->set_dma_mask
after the initial checks, and those instance have been fixed to do the
full work.  h8300 implemented dma_set_mask bogusly as a no-ops and has
been fixed.

Unfortunately some architectures overload unrelated semantics like changing
the dma_ops into it so we still need to allow for an architecture override
for now.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>