- 17 3月, 2017 2 次提交
-
-
由 Soheil Hassas Yeganeh 提交于
The tcp_tw_recycle was already broken for connections behind NAT, since the per-destination timestamp is not monotonically increasing for multiple machines behind a single destination address. After the randomization of TCP timestamp offsets in commit 8a5bd45f6616 (tcp: randomize tcp timestamp offsets for each connection), the tcp_tw_recycle is broken for all types of connections for the same reason: the timestamps received from a single machine is not monotonically increasing, anymore. Remove tcp_tw_recycle, since it is not functional. Also, remove the PAWSPassive SNMP counter since it is only used for tcp_tw_recycle, and simplify tcp_v4_route_req and tcp_v6_route_req since the strict argument is only set when tcp_tw_recycle is enabled. Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NYuchung Cheng <ycheng@google.com> Cc: Lutz Vieweg <lvml@5t9.de> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Soheil Hassas Yeganeh 提交于
Commit 8a5bd45f6616 (tcp: randomize tcp timestamp offsets for each connection) randomizes TCP timestamps per connection. After this commit, there is no guarantee that the timestamps received from the same destination are monotonically increasing. As a result, the per-destination timestamp cache in TCP metrics (i.e., tcpm_ts in struct tcp_metrics_block) is broken and cannot be relied upon. Remove the per-destination timestamp cache and all related code paths. Note that this cache was already broken for caching timestamps of multiple machines behind a NAT sharing the same address. Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NYuchung Cheng <ycheng@google.com> Cc: Lutz Vieweg <lvml@5t9.de> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 3月, 2017 1 次提交
-
-
由 Jon Maxwell 提交于
As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)
↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb33206 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: NJon Maxwell <jmaxwell37@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2017 1 次提交
-
-
由 Alexey Kodanev 提交于
The functions that are returning tcp sequence number also setup TS offset value, so rename them to better describe their purpose. No functional changes in this patch. Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 2月, 2017 1 次提交
-
-
由 Alexey Kodanev 提交于
Found that when randomized tcp offsets are enabled (by default) TCP client can still start new connections without them. Later, if server does active close and re-uses sockets in TIME-WAIT state, new SYN from client can be rejected on PAWS check inside tcp_timewait_state_process(), because either tw_ts_recent or rcv_tsval doesn't really have an offset set. Here is how to reproduce it with LTP netstress tool: netstress -R 1 & netstress -H 127.0.0.1 -lr 1000000 -a1 [...] < S seq 1956977072 win 43690 TS val 295618 ecr 459956970 > . ack 1956911535 win 342 TS val 459967184 ecr 1547117608 < R seq 1956911535 win 0 length 0 +1. < S seq 1956977072 win 43690 TS val 296640 ecr 459956970 > S. seq 657450664 ack 1956977073 win 43690 TS val 459968205 ecr 296640 Fixes: 95a22cae ("tcp: randomize tcp timestamp offsets for each connection") Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2017 1 次提交
-
-
由 Jonathan T. Leighton 提交于
This patch adds a check on the type of the source address for the case where the destination address is in6addr_any. If the source is an IPv4-mapped IPv6 source address, the destination is changed to ::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This is done in three locations to handle UDP calls to either connect() or sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays handling an in6addr_any destination until very late, so the patch only needs to handle the case where the source is an IPv4-mapped IPv6 address. Signed-off-by: NJonathan T. Leighton <jtleight@udel.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2017 1 次提交
-
-
由 Eric Dumazet 提交于
Dmitry reported use-after-free in ip6_datagram_recv_specific_ctl() A similar bug was fixed in commit 8ce48623 ("ipv6: tcp: restore IP6CB for pktoptions skbs"), but I missed another spot. tcp_v6_syn_recv_sock() can indeed set np->pktoptions from ireq->pktopts Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 2月, 2017 1 次提交
-
-
由 Eric Dumazet 提交于
Small cleanup factorizing code doing the TCP_MAXSEG clamping. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 1月, 2017 1 次提交
-
-
由 Pablo Neira 提交于
Unlike ipv4, this control socket is shared by all cpus so we cannot use it as scratchpad area to annotate the mark that we pass to ip6_xmit(). Add a new parameter to ip6_xmit() to indicate the mark. The SCTP socket family caches the flowi6 structure in the sctp_transport structure, so we cannot use to carry the mark unless we later on reset it back, which I discarded since it looks ugly to me. Fixes: bf99b4de ("tcp: fix mark propagation with fwmark_reflect enabled") Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2017 2 次提交
-
-
由 Wei Wang 提交于
This patch adds a new socket option, TCP_FASTOPEN_CONNECT, as an alternative way to perform Fast Open on the active side (client). Prior to this patch, a client needs to replace the connect() call with sendto(MSG_FASTOPEN). This can be cumbersome for applications who want to use Fast Open: these socket operations are often done in lower layer libraries used by many other applications. Changing these libraries and/or the socket call sequences are not trivial. A more convenient approach is to perform Fast Open by simply enabling a socket option when the socket is created w/o changing other socket calls sequence: s = socket() create a new socket setsockopt(s, IPPROTO_TCP, TCP_FASTOPEN_CONNECT …); newly introduced sockopt If set, new functionality described below will be used. Return ENOTSUPP if TFO is not supported or not enabled in the kernel. connect() With cookie present, return 0 immediately. With no cookie, initiate 3WHS with TFO cookie-request option and return -1 with errno = EINPROGRESS. write()/sendmsg() With cookie present, send out SYN with data and return the number of bytes buffered. With no cookie, and 3WHS not yet completed, return -1 with errno = EINPROGRESS. No MSG_FASTOPEN flag is needed. read() Return -1 with errno = EWOULDBLOCK/EAGAIN if connect() is called but write() is not called yet. Return -1 with errno = EWOULDBLOCK/EAGAIN if connection is established but no msg is received yet. Return number of bytes read if socket is established and there is msg received. The new API simplifies life for applications that always perform a write() immediately after a successful connect(). Such applications can now take advantage of Fast Open by merely making one new setsockopt() call at the time of creating the socket. Nothing else about the application's socket call sequence needs to change. Signed-off-by: NWei Wang <weiwan@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Wang 提交于
Remove __sk_dst_reset() in the failure handling because __sk_dst_reset() will eventually get called when sk is released. No need to handle it in the protocol specific connect call. This is also to make the code path consistent with ipv4. Signed-off-by: NWei Wang <weiwan@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2017 1 次提交
-
-
由 Josef Bacik 提交于
The only difference between inet6_csk_bind_conflict and inet_csk_bind_conflict is how they check the rcv_saddr, so delete this call back and simply change inet_csk_bind_conflict to call inet_rcv_saddr_equal. Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2017 2 次提交
-
-
由 Yuchung Cheng 提交于
This patch removes the support of RFC5827 early retransmit (i.e., fast recovery on small inflight with <3 dupacks) because it is subsumed by the new RACK loss detection. More specifically when RACK receives DUPACKs, it'll arm a reordering timer to start fast recovery after a quarter of (min)RTT, hence it covers the early retransmit except RACK does not limit itself to specific inflight or dupack numbers. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
This patch makes RACK install a reordering timer when it suspects some packets might be lost, but wants to delay the decision a little bit to accomodate reordering. It does not create a new timer but instead repurposes the existing RTO timer, because both are meant to retransmit packets. Specifically it arms a timer ICSK_TIME_REO_TIMEOUT when the RACK timing check fails. The wait time is set to RACK.RTT + RACK.reo_wnd - (NOW - Packet.xmit_time) + fudge This translates to expecting a packet (Packet) should take (RACK.RTT + RACK.reo_wnd + fudge) to deliver after it was sent. When there are multiple packets that need a timer, we use one timer with the maximum timeout. Therefore the timer conservatively uses the maximum window to expire N packets by one timeout, instead of N timeouts to expire N packets sent at different times. The fudge factor is 2 jiffies to ensure when the timer fires, all the suspected packets would exceed the deadline and be marked lost by tcp_rack_detect_loss(). It has to be at least 1 jiffy because the clock may tick between calling icsk_reset_xmit_timer(timeout) and actually hang the timer. The next jiffy is to lower-bound the timeout to 2 jiffies when reo_wnd is < 1ms. When the reordering timer fires (tcp_rack_reo_timeout): If we aren't in Recovery we'll enter fast recovery and force fast retransmit. This is very similar to the early retransmit (RFC5827) except RACK is not constrained to only enter recovery for small outstanding flights. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 1月, 2017 2 次提交
-
-
由 Ursula Braun 提交于
Direct call of tcp_set_keepalive() function from protocol-agnostic sock_setsockopt() function in net/core/sock.c violates network layering. And newly introduced protocol (SMC-R) will need its own keepalive function. Therefore, add "keepalive" function pointer to "struct proto", and call it from sock_setsockopt() via this pointer. Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: NUtz Bacher <utz.bacher@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pau Espin Pedrol 提交于
Otherwise, RST packets generated by the TCP stack for non-existing sockets always have mark 0. The mark from the original packet is assigned to the netns_ipv4/6 socket used to send the response so that it can get copied into the response skb when the socket sends it. Fixes: e110861f ("net: add a sysctl to reflect the fwmark on replies") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: NPau Espin Pedrol <pau.espin@tessares.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 30 12月, 2016 1 次提交
-
-
由 Haishuang Yan 提交于
Different namespace application might require fast recycling TIME-WAIT sockets independently of the host. Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
tsq_flags being in the same cache line than sk_wmem_alloc makes a lot of sense. Both fields are changed from tcp_wfree() and more generally by various TSQ related functions. Prior patch made room in struct sock and added sk_tsq_flags, this patch deletes tsq_flags from struct tcp_sock. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2016 1 次提交
-
-
由 Florian Westphal 提交于
jiffies based timestamps allow for easy inference of number of devices behind NAT translators and also makes tracking of hosts simpler. commit ceaa1fef ("tcp: adding a per-socket timestamp offset") added the main infrastructure that is needed for per-connection ts randomization, in particular writing/reading the on-wire tcp header format takes the offset into account so rest of stack can use normal tcp_time_stamp (jiffies). So only two items are left: - add a tsoffset for request sockets - extend the tcp isn generator to also return another 32bit number in addition to the ISN. Re-use of ISN generator also means timestamps are still monotonically increasing for same connection quadruple, i.e. PAWS will still work. Includes fixes from Eric Dumazet. Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 11月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
With syzkaller help, Marco Grassi found a bug in TCP stack, crashing in tcp_collapse() Root cause is that sk_filter() can truncate the incoming skb, but TCP stack was not really expecting this to happen. It probably was expecting a simple DROP or ACCEPT behavior. We first need to make sure no part of TCP header could be removed. Then we need to adjust TCP_SKB_CB(skb)->end_seq Many thanks to syzkaller team and Marco for giving us a reproducer. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NMarco Grassi <marco.gra@gmail.com> Reported-by: NVladis Dronov <vdronov@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 11月, 2016 1 次提交
-
-
由 David Ahern 提交于
Lorenzo noted an Android unit test failed due to e0d56fdd: "The expectation in the test was that the RST replying to a SYN sent to a closed port should be generated with oif=0. In other words it should not prefer the interface where the SYN came in on, but instead should follow whatever the routing table says it should do." Revert the change to ip_send_unicast_reply and tcp_v6_send_response such that the oif in the flow is set to the skb_iif only if skb_iif is an L3 master. Fixes: e0d56fdd ("net: l3mdev: remove redundant calls") Reported-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Tested-by: NLorenzo Colitti <lorenzo@google.com> Acked-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 11月, 2016 1 次提交
-
-
由 Lorenzo Colitti 提交于
- Use the UID in routing lookups made by protocol connect() and sendmsg() functions. - Make sure that routing lookups triggered by incoming packets (e.g., Path MTU discovery) take the UID of the socket into account. - For packets not associated with a userspace socket, (e.g., ping replies) use UID 0 inside the user namespace corresponding to the network namespace the socket belongs to. This allows all namespaces to apply routing and iptables rules to kernel-originated traffic in that namespaces by matching UID 0. This is better than using the UID of the kernel socket that is sending the traffic, because the UID of kernel sockets created at namespace creation time (e.g., the per-processor ICMP and TCP sockets) is the UID of the user that created the socket, which might not be mapped in the namespace. Tested: compiles allnoconfig, allyesconfig, allmodconfig Tested: https://android-review.googlesource.com/253302Signed-off-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
Baozeng Ding reported following KASAN splat : BUG: KASAN: use-after-free in ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 at addr ffff880029c84ec8 Read of size 1 by task poc/25548 Call Trace: [<ffffffff82cf43c9>] dump_stack+0x12e/0x185 /lib/dump_stack.c:15 [< inline >] print_address_description /mm/kasan/report.c:204 [<ffffffff817ced3b>] kasan_report_error+0x48b/0x4b0 /mm/kasan/report.c:283 [< inline >] kasan_report /mm/kasan/report.c:303 [<ffffffff817ced9e>] __asan_report_load1_noabort+0x3e/0x40 /mm/kasan/report.c:321 [<ffffffff85c71da1>] ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 /net/ipv6/datagram.c:687 [<ffffffff85c734c3>] ip6_datagram_recv_ctl+0x33/0x40 [<ffffffff85c0b07c>] do_ipv6_getsockopt.isra.4+0xaec/0x2150 [<ffffffff85c0c7f6>] ipv6_getsockopt+0x116/0x230 [<ffffffff859b5a12>] tcp_getsockopt+0x82/0xd0 /net/ipv4/tcp.c:3035 [<ffffffff855fb385>] sock_common_getsockopt+0x95/0xd0 /net/core/sock.c:2647 [< inline >] SYSC_getsockopt /net/socket.c:1776 [<ffffffff855f8ba2>] SyS_getsockopt+0x142/0x230 /net/socket.c:1758 [<ffffffff8685cdc5>] entry_SYSCALL_64_fastpath+0x23/0xc6 Memory state around the buggy address: ffff880029c84d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff880029c84e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff880029c84f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff He also provided a syzkaller reproducer. Issue is that ip6_datagram_recv_specific_ctl() expects to find IP6CB data that was moved at a different place in tcp_v6_rcv() This patch moves tcp_v6_restore_cb() up and calls it from tcp_v6_do_rcv() when np->pktoptions is set. Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NBaozeng Ding <sploving1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 9月, 2016 1 次提交
-
-
由 David Ahern 提交于
A previous patch added l3mdev flow update making these hooks redundant. Remove them. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 8月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
When TCP operates in lossy environments (between 1 and 10 % packet losses), many SACK blocks can be exchanged, and I noticed we could drop them on busy senders, if these SACK blocks have to be queued into the socket backlog. While the main cause is the poor performance of RACK/SACK processing, we can try to avoid these drops of valuable information that can lead to spurious timeouts and retransmits. Cause of the drops is the skb->truesize overestimation caused by : - drivers allocating ~2048 (or more) bytes as a fragment to hold an Ethernet frame. - various pskb_may_pull() calls bringing the headers into skb->head might have pulled all the frame content, but skb->truesize could not be lowered, as the stack has no idea of each fragment truesize. The backlog drops are also more visible on bidirectional flows, since their sk_rmem_alloc can be quite big. Let's add some room for the backlog, as only the socket owner can selectively take action to lower memory needs, like collapsing receive queues or partial ofo pruning. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 8月, 2016 2 次提交
-
-
由 Eric Dumazet 提交于
Adds SNMP counter for drops caused by MD5 mismatches. The current syslog might help, but a counter is more precise and helps monitoring. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
TCP MD5 mismatches do increment sk_drops counter in all states but SYN_RECV. This is very unlikely to happen in the real world, but worth adding to help diagnostics. We increase the parent (listener) sk_drops. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 8月, 2016 2 次提交
-
-
由 Eric Dumazet 提交于
Now RCU lookups of IPv6 TCP sockets no longer dereference pinet6, we do not need tcp_v6_clear_sk() anymore. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When sending an ack in SYN_RECV state, we must scale the offered window if wscale option was negotiated and accepted. Tested: Following packetdrill test demonstrates the issue : 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // Establish a connection. +0 < S 0:0(0) win 20000 <mss 1000,sackOK,wscale 7, nop, TS val 100 ecr 0> +0 > S. 0:0(0) ack 1 win 28960 <mss 1460,sackOK, TS val 100 ecr 100, nop, wscale 7> +0 < . 1:11(10) ack 1 win 156 <nop,nop,TS val 99 ecr 100> // check that window is properly scaled ! +0 > . 1:1(0) ack 1 win 226 <nop,nop,TS val 200 ecr 100> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
Some arches have virtually mapped kernel stacks, or will soon have. tcp_md5_hash_header() uses an automatic variable to copy tcp header before mangling th->check and calling crypto function, which might be problematic on such arches. David says that using percpu storage is also problematic on non SMP builds. Just use kmalloc() to allocate scratch areas. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2016 1 次提交
-
-
由 Huw Davies 提交于
If set, these will take precedence over the parent's options during both sending and child creation. If they're not set, the parent's options (if any) will be used. This is to allow the security_inet_conn_request() hook to modify the IPv6 options in just the same way that it already may do for IPv4. Signed-off-by: NHuw Davies <huw@codeweavers.com> Signed-off-by: NPaul Moore <paul@paul-moore.com>
-
- 15 6月, 2016 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
Cc: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Fixes: 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 6月, 2016 1 次提交
-
-
由 Yuchung Cheng 提交于
The v6 tcp stats scan do not provide TLP and ER timer information correctly like the v4 version . This patch fixes that. Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)") Fixes: eed530b6 ("tcp: early retransmit") Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
tcp_hdr() is slightly more expensive than using skb->data in contexts where we know they point to the same byte. In receive path, tcp_v4_rcv() and tcp_v6_rcv() are in this situation, as tcp header has not been pulled yet. In output path, the same can be said when we just pushed the tcp header in the skb, in tcp_transmit_skb() and tcp_make_synack() Also factorize the two checks for tcb->tcp_flags & TCPHDR_SYN in tcp_transmit_skb() and pass tcp header pointer to tcp_ecn_send(), so that compiler can further optimize and avoid a reload. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 5月, 2016 1 次提交
-
-
由 David Ahern 提交于
Responses for packets to unused ports are getting lost with L3 domains. IPv4 has ip_send_unicast_reply for sending TCP responses which accounts for L3 domains; update the IPv6 counterpart tcp_v6_send_response. For icmp the L3 master check needs to be moved up in icmp6_send to properly respond to UDP packets to a port with no listener. Fixes: ca254490 ("net: Add VRF support to IPv6 stack") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
We want to to make TCP stack preemptible, as draining prequeue and backlog queues can take lot of time. Many SNMP updates were assuming that BH (and preemption) was disabled. Need to convert some __NET_INC_STATS() calls to NET_INC_STATS() and some __TCP_INC_STATS() to TCP_INC_STATS() Before using this_cpu_ptr(net->ipv4.tcp_sk) in tcp_v4_send_reset() and tcp_v4_send_ack(), we add an explicit preempt disabled section. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 4月, 2016 3 次提交
-
-
由 Eric Dumazet 提交于
Rename NET_INC_STATS_BH() to __NET_INC_STATS() and NET_ADD_STATS_BH() to __NET_ADD_STATS() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Rename ICMP6_INC_STATS_BH() to __ICMP6_INC_STATS() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Rename TCP_INC_STATS_BH() to __TCP_INC_STATS() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
When removing sk_refcnt manipulation on synflood, I missed that using skb_set_owner_w() was racy, if sk->sk_wmem_alloc had already transitioned to 0. We should hold sk_refcnt instead, but this is a big deal under attack. (Doing so increase performance from 3.2 Mpps to 3.8 Mpps only) In this patch, I chose to not attach a socket to syncookies skb. Performance is now 5 Mpps instead of 3.2 Mpps. Following patch will remove last known false sharing in tcp_rcv_state_process() Fixes: 3b24d854 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-