1. 21 5月, 2012 2 次提交
    • S
      exofs: Add SYSFS info for autologin/pNFS export · 8b56a30c
      Sachin Bhamare 提交于
      Introduce sysfs infrastructure for exofs cluster filesystem.
      
      Each OSD target shows up as below in the sysfs hierarchy:
      	/sys/fs/exofs/<osdname>_<partition_id>/devX
      
      Where <osdname>_<partition_id> is the unique identification
      of a Superblock.
      
      Where devX: 0 <= X < device_table_size. They are ordered
      in device-table order as specified to the mkfs.exofs command
      
      Each OSD device  devX has following attributes :
      	osdname - ReadOnly
      	systemid - ReadOnly
      	uri - Read/Write
      
      It is up to user-mode to update devX/uri for support of
      autologin.
      
      These sysfs information are used both for autologin as well
      as support for exporting exofs via a pNFSD server in user-mode.
      (.eg NFS-Ganesha)
      Signed-off-by: NSachin Bhamare <sbhamare@panasas.com>
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      8b56a30c
    • B
      exofs: Fix CRASH on very early IO errors. · 6abe4a87
      Boaz Harrosh 提交于
      If at exofs_fill_super() we had an early termination
      do to any error, like an IO error while reading the
      super-block. We would crash inside exofs_free_sbi().
      
      This is because sbi->oc.numdevs was set to 1, before
      we actually have a device table at all.
      
      Fix it by moving the sbi->oc.numdevs = 1 to after the
      allocation of the device table.
      Reported-by: NJohannes Schild <JSchild@gmx.de>
      
      Stable: This is a bug since v3.2.0
      CC: Stable Tree <stable@kernel.org>
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      6abe4a87
  2. 13 5月, 2012 16 次提交
  3. 12 5月, 2012 16 次提交
    • M
      dm mpath: check if scsi_dh module already loaded before trying to load · 510193a2
      Mike Snitzer 提交于
      If the requested scsi_dh module is already loaded then skip
      request_module().
      
      Multipath table loads can hang in an unnecessary __request_module.
      Reported-by: NBen Marzinski <bmarzins@redhat.com>
      Cc: stable@kernel.org
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      510193a2
    • A
      dm thin: correct module description · 7cab8bf1
      Alasdair G Kergon 提交于
      Remove duplicate copy of string "device-mapper" (DM_NAME) from
      MODULE_DESCRIPTION.
      Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      7cab8bf1
    • M
      dm thin: fix unprotected use of prepared_discards list · c3a0ce2e
      Mike Snitzer 提交于
      Fix two places in commit 104655fd ("dm thin: support discards") that
      didn't use pool->lock to protect against concurrent changes to the
      prepared_discards list.
      
      Without this fix, thin_endio() can race with process_discard(), leading
      to concurrent list_add()s that result in the processes locking up with
      an error like the following:
      
      WARNING: at lib/list_debug.c:32 __list_add+0x8f/0xa0()
      ...
      list_add corruption. next->prev should be prev (ffff880323b96140), but was ffff8801d2c48440. (next=ffff8801d2c485c0).
      ...
      Pid: 17205, comm: kworker/u:1 Tainted: G        W  O 3.4.0-rc3.snitm+ #1
      Call Trace:
       [<ffffffff8103ca1f>] warn_slowpath_common+0x7f/0xc0
       [<ffffffff8103cb16>] warn_slowpath_fmt+0x46/0x50
       [<ffffffffa04f6ce6>] ? bio_detain+0xc6/0x210 [dm_thin_pool]
       [<ffffffff8124ff3f>] __list_add+0x8f/0xa0
       [<ffffffffa04f70d2>] process_discard+0x2a2/0x2d0 [dm_thin_pool]
       [<ffffffffa04f6a78>] ? remap_and_issue+0x38/0x50 [dm_thin_pool]
       [<ffffffffa04f7c3b>] process_deferred_bios+0x7b/0x230 [dm_thin_pool]
       [<ffffffffa04f7df0>] ? process_deferred_bios+0x230/0x230 [dm_thin_pool]
       [<ffffffffa04f7e42>] do_worker+0x52/0x60 [dm_thin_pool]
       [<ffffffff81056fa9>] process_one_work+0x129/0x450
       [<ffffffff81059b9c>] worker_thread+0x17c/0x3c0
       [<ffffffff81059a20>] ? manage_workers+0x120/0x120
       [<ffffffff8105eabe>] kthread+0x9e/0xb0
       [<ffffffff814ceda4>] kernel_thread_helper+0x4/0x10
       [<ffffffff8105ea20>] ? kthread_freezable_should_stop+0x70/0x70
       [<ffffffff814ceda0>] ? gs_change+0x13/0x13
      ---[ end trace 7e0a523bc5e52692 ]---
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      c3a0ce2e
    • M
      dm thin: reinstate missing mempool_free in cell_release_singleton · 03aaae7c
      Mike Snitzer 提交于
      Fix a significant memory leak inadvertently introduced during
      simplification of cell_release_singleton() in commit
      6f94a4c4 ("dm thin: fix stacked bi_next
      usage").
      
      A cell's hlist_del() must be accompanied by a mempool_free().
      Use __cell_release() to do this, like before.
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      03aaae7c
    • S
      gpio/exynos: Fix compiler warnings when non-exynos machines are selected · 2760f7ad
      Sachin Kamat 提交于
      Fixes the following compiler warnings:
      
      drivers/gpio/gpio-samsung.c: In function ‘samsung_gpiolib_init’:
      drivers/gpio/gpio-samsung.c:2980:1: warning: label ‘err_ioremap1’ defined but not used [-Wunused-label]
      drivers/gpio/gpio-samsung.c:2978:1: warning: label ‘err_ioremap2’ defined but not used [-Wunused-label]
      drivers/gpio/gpio-samsung.c:2976:1: warning: label ‘err_ioremap3’ defined but not used [-Wunused-label]
      drivers/gpio/gpio-samsung.c:2974:1: warning: label ‘err_ioremap4’ defined but not used [-Wunused-label]
      drivers/gpio/gpio-samsung.c:2722:55: warning: unused variable ‘gpio_base4’ [-Wunused-variable]
      
      drivers/gpio/gpio-samsung.c:455:32: warning: ‘exynos_gpio_cfg’ defined but not used [-Wunused-variable]
      drivers/gpio/gpio-samsung.c:2126:33: warning: ‘exynos4_gpios_1’ defined but not used [-Wunused-variable]
      drivers/gpio/gpio-samsung.c:2228:33: warning: ‘exynos4_gpios_2’ defined but not used [-Wunused-variable]
      drivers/gpio/gpio-samsung.c:2373:33: warning: ‘exynos4_gpios_3’ defined but not used [-Wunused-variable]
      Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
      Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
      2760f7ad
    • T
      gpio: pch9: Use proper flow type handlers · df9541a6
      Thomas Gleixner 提交于
      Jean-Francois Dagenais reported:
      
       Configuring a gpio pin with the gpio-pch driver with
       "IRQF_TRIGGER_LOW | IRQF_ONESHOT" generates an interrupt storm for
       threaded ISR until the ISR thread actually gets to physically clear
       the interrupt on the triggering chip!! The immediate observable
       symptom is the high CPU usage for my ISR thread task and the
       interrupt count in /proc/interrupts incrementing radically.
      
      The driver is wrong in several ways:
      
      1) Using handle_simple_irq() does not provide proper flow control
         handling. In the case of oneshot threaded handlers for the
         demultiplexed interrupts this results in an interrupt storm because
         the simple handler does not deal with masking/unmasking.  Even
         without threaded oneshot handlers an interrupt storm for level type
         interrupts can easily be triggered when the interrupt is disabled
         and the interrupt line is activated from the device.
      
      2) Acknowlegding the demultiplexed interrupt before calling the
         handler is wrong for level type interrupts.
      
      3) The set_type function unconditionally enables the interrupt. It's
         supposed to set the type and nothing else. The unmasking is done by
         the core code.
      
      Move the acknowledge code into a separate function and add it to the
      demux irqchip callbacks.
      
      Remove the unconditional enabling from the set_type() callback and set
      the proper flow handlers depending on the selected type (level/edge).
      Reported-and-tested-by: NJean-Francois Dagenais <jeff.dagenais@gmail.com>
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
      df9541a6
    • L
      Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6 · bcc62fb0
      Linus Torvalds 提交于
      Pull GPIO omap bug fix from Grant Likely.
      
      * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
        gpio/omap: fix incorrect initialization of omap_gpio_mod_init
      bcc62fb0
    • L
      Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc · ec53646f
      Linus Torvalds 提交于
      Pull another powerpc irq fix from Benjamin Herrenschmidt:
       "It looks like my previous fix for the lazy irq masking problem wasn't
        quite enough.  There was another problem related to performance
        monitor interrupts acting as NMIs leaving the flags in an incorrect
        state.  Here's a fix that finally seems to make perf solid again."
      
      * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
        powerpc/irq: Fix another case of lazy IRQ state getting out of sync
      ec53646f
    • L
      Merge branch '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending · 04e53358
      Linus Torvalds 提交于
      Pull target fix from Nicholas Bellinger:
       "This patch removes some incorrect legacy code to free se_lun_acl
        memory in the NodeACL release path that could potentially trigger an
        OOPS during shutdown once dynamic -> explicit initiator NodeACL
        conversion has occurred.
      
        That said, we've been able to trigger an OOPS in v4.0 code for this
        special case when the associated MappedLUNs had not also been made
        explicit based on active TPG LUN layout during the conversion, so it
        really makes senses to go ahead and drop this extra cruft to avoid any
        possible issues here.
      
        This ends up only effecting iscsi-target module code (it's the only
        user) and is CC'ed to stable."
      
      * '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
        target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversion
      04e53358
    • B
      powerpc/irq: Fix another case of lazy IRQ state getting out of sync · 7c0482e3
      Benjamin Herrenschmidt 提交于
      So we have another case of paca->irq_happened getting out of
      sync with the HW irq state. This can happen when a perfmon
      interrupt occurs while soft disabled, as it will return to a
      soft disabled but hard enabled context while leaving a stale
      PACA_IRQ_HARD_DIS flag set.
      
      This patch fixes it, and also adds a test for the condition
      of those flags being out of sync in arch_local_irq_restore()
      when CONFIG_TRACE_IRQFLAGS is enabled.
      
      This helps catching those gremlins faster (and so far I
      can't seem see any anymore, so that's good news).
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      7c0482e3
    • S
      ks8851: Update link status during link change interrupt · 062e55e3
      Stephen Boyd 提交于
      If a link change interrupt comes in we just clear the interrupt
      and continue along without notifying the upper networking layers
      that the link has changed. Use the mii_check_link() function to
      update the link status whenever a link change interrupt occurs.
      
      Cc: Ben Dooks <ben-linux@fluff.org>
      Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      062e55e3
    • B
      macvtap: restore vlan header on user read · f09e2249
      Basil Gor 提交于
      Ethernet vlan header is not on the packet and kept in the skb->vlan_tci
      when it comes from lower dev. This patch inserts vlan header in user
      buffer during skb copy on user read.
      Signed-off-by: NBasil Gor <basil.gor@gmail.com>
      Acked-by: NMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f09e2249
    • B
      vhost-net: fix handle_rx buffer size · c53cff5e
      Basil Gor 提交于
      Take vlan header length into account, when vlan id is stored as
      vlan_tci. Otherwise tagged packets coming from macvtap will be
      truncated.
      Signed-off-by: NBasil Gor <basil.gor@gmail.com>
      Acked-by: NMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c53cff5e
    • N
      target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversion · cfebf8f4
      Nicholas Bellinger 提交于
      This patch removes some potentially problematic legacy code within
      core_clear_initiator_node_from_tpg() that was originally intended to
      release left over se_lun_acl setup during dynamic NodeACL+MappedLUN
      generate when running with TPG demo-mode operation.
      
      Since we now only ever expect to allocate and release se_lun_acl from
      within target_core_fabric_configfs.c:target_fabric_make_mappedlun() and
      target_fabric_drop_mappedlun() context respectively, this code for
      demo-mode release is incorrect and needs to be removed.
      
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Andy Grover <agrover@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
      cfebf8f4
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu · 4e25651b
      Linus Torvalds 提交于
      Pull a m68knommu fix from Greg Ungerer:
       "It contains a single fix for including the ColdFire QSPI interface
        setup code when enabled as a module.  This was broken in the
        consolidation of the ColdFire SoC device tables in the 3.4 merge
        window."
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
        m68knommu: enable qspi support when SPI_COLDFIRE_QSPI = m
      4e25651b
    • H
      mm: raise MemFree by reverting percpu_pagelist_fraction to 0 · 1b76b02f
      Hugh Dickins 提交于
      Why is there less MemFree than there used to be?  It perturbed a test,
      so I've just been bisecting linux-next, and now find the offender went
      upstream yesterday.
      
      Commit 93278814 "mm: fix division by 0 in percpu_pagelist_fraction()"
      mistakenly initialized percpu_pagelist_fraction to the sysctl's minimum 8,
      which leaves 1/8th of memory on percpu lists (on each cpu??); but most of
      us expect it to be left unset at 0 (and it's not then used as a divisor).
      
        MemTotal: 8061476kB  8061476kB  8061476kB  8061476kB  8061476kB  8061476kB
        Repetitive test with percpu_pagelist_fraction 8:
        MemFree:  6948420kB  6237172kB  6949696kB  6840692kB  6949048kB  6862984kB
        Same test with percpu_pagelist_fraction back to 0:
        MemFree:  7945000kB  7944908kB  7948568kB  7949060kB  7948796kB  7948812kB
      Signed-off-by: NHugh Dickins <hughd@google.com>
      [ We really should fix the crazy sysctl interface too, but that's a
        separate thing - Linus ]
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1b76b02f
  4. 11 5月, 2012 6 次提交
    • J
      bonding: don't increase rx_dropped after processing LACPDUs · 13a8e0c8
      Jiri Bohac 提交于
      Since commit 3aba891d, bonding processes LACP frames (802.3ad
      mode) with bond_handle_frame(). Currently a copy of the skb is
      made and the original is left to be processed by other
      rx_handlers and the rest of the network stack by returning
      RX_HANDLER_ANOTHER.  As there is no protocol handler for
      PKT_TYPE_LACPDU, the frame is dropped and dev->rx_dropped
      increased.
      
      Fix this by making bond_handle_frame() return RX_HANDLER_CONSUMED
      if bonding has processed the LACP frame.
      Signed-off-by: NJiri Bohac <jbohac@suse.cz>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      13a8e0c8
    • E
      connector/userns: replace netlink uses of cap_raised() with capable() · 38bf1953
      Eric W. Biederman 提交于
      In 2009 Philip Reiser notied that a few users of netlink connector
      interface needed a capability check and added the idiom
      cap_raised(nsp->eff_cap, CAP_SYS_ADMIN) to a few of them, on the premise
      that netlink was asynchronous.
      
      In 2011 Patrick McHardy noticed we were being silly because netlink is
      synchronous and removed eff_cap from the netlink_skb_params and changed
      the idiom to cap_raised(current_cap(), CAP_SYS_ADMIN).
      
      Looking at those spots with a fresh eye we should be calling
      capable(CAP_SYS_ADMIN).  The only reason I can see for not calling capable
      is that it once appeared we were not in the same task as the caller which
      would have made calling capable() impossible.
      
      In the initial user_namespace the only difference between between
      cap_raised(current_cap(), CAP_SYS_ADMIN) and capable(CAP_SYS_ADMIN) are a
      few sanity checks and the fact that capable(CAP_SYS_ADMIN) sets
      PF_SUPERPRIV if we use the capability.
      
      Since we are going to be using root privilege setting PF_SUPERPRIV seems
      the right thing to do.
      
      The motivation for this that patch is that in a child user namespace
      cap_raised(current_cap(),...) tests your capabilities with respect to that
      child user namespace not capabilities in the initial user namespace and
      thus will allow processes that should be unprivielged to use the kernel
      services that are only protected with cap_raised(current_cap(),..).
      
      To fix possible user_namespace issues and to just clean up the code
      replace cap_raised(current_cap(), CAP_SYS_ADMIN) with
      capable(CAP_SYS_ADMIN).
      Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
      Cc: Patrick McHardy <kaber@trash.net>
      Cc: Philipp Reisner <philipp.reisner@linbit.com>
      Acked-by: NSerge E. Hallyn <serge.hallyn@canonical.com>
      Acked-by: NAndrew G. Morgan <morgan@kernel.org>
      Cc: Vasiliy Kulikov <segoon@openwall.com>
      Cc: David Howells <dhowells@redhat.com>
      Reviewed-by: NJames Morris <james.l.morris@oracle.com>
      Cc: David Miller <davem@davemloft.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      38bf1953
    • N
      sctp: check cached dst before using it · e0268868
      Nicolas Dichtel 提交于
      dst_check() will take care of SA (and obsolete field), hence
      IPsec rekeying scenario is taken into account.
      Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
      Acked-by: NVlad Yaseivch <vyasevich@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e0268868
    • E
      pktgen: fix crash at module unload · c57b5468
      Eric Dumazet 提交于
      commit 7d3d43da (net: In unregister_netdevice_notifier unregister
      the netdevices.) makes pktgen crashing at module unload.
      
      [  296.820578] BUG: spinlock bad magic on CPU#6, rmmod/3267
      [  296.820719]  lock: ffff880310c38000, .magic: ffff8803, .owner: <none>/-1, .owner_cpu: -1
      [  296.820943] Pid: 3267, comm: rmmod Not tainted 3.4.0-rc5+ #254
      [  296.821079] Call Trace:
      [  296.821211]  [<ffffffff8168a715>] spin_dump+0x8a/0x8f
      [  296.821345]  [<ffffffff8168a73b>] spin_bug+0x21/0x26
      [  296.821507]  [<ffffffff812b4741>] do_raw_spin_lock+0x131/0x140
      [  296.821648]  [<ffffffff8169188e>] _raw_spin_lock+0x1e/0x20
      [  296.821786]  [<ffffffffa00cc0fd>] __pktgen_NN_threads+0x4d/0x140 [pktgen]
      [  296.821928]  [<ffffffffa00ccf8d>] pktgen_device_event+0x10d/0x1e0 [pktgen]
      [  296.822073]  [<ffffffff8154ed4f>] unregister_netdevice_notifier+0x7f/0x100
      [  296.822216]  [<ffffffffa00d2a0b>] pg_cleanup+0x48/0x73 [pktgen]
      [  296.822357]  [<ffffffff8109528e>] sys_delete_module+0x17e/0x2a0
      [  296.822502]  [<ffffffff81699652>] system_call_fastpath+0x16/0x1b
      
      Hold the pktgen_thread_lock while splicing pktgen_threads, and test
      pktgen_exiting in pktgen_device_event() to make unload faster.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Cc: Eric W. Biederman <ebiederm@xmission.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c57b5468
    • D
      Revert "net: maintain namespace isolation between vlan and real device" · 59b9997b
      David S. Miller 提交于
      This reverts commit 8a83a00b.
      
      It causes regressions for S390 devices, because it does an
      unconditional DST drop on SKBs for vlans and the QETH device
      needs the neighbour entry hung off the DST for certain things
      on transmit.
      
      Arnd can't remember exactly why he even needed this change.
      
      Conflicts:
      
      	drivers/net/macvlan.c
      	net/8021q/vlan_dev.c
      	net/core/dev.c
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      59b9997b
    • T
      ehea: fix losing of NEQ events when one event occurred early · 380ec964
      Thadeu Lima de Souza Cascardo 提交于
      The NEQ interrupt is only triggered when there was no previous pending
      interrupt. If we request irq handling after an interrupt has occurred,
      we will never get an interrupt until we call H_RESET_EVENTS.
      
      Events seem to be cleared when we first register the NEQ. So, when we
      requested irq handling right after registering it, a possible race with
      an interrupt was much less likely. Now, there is a chance we may lose
      this race and never get any events.
      
      The fix here is to poll and acknowledge any events that might have
      happened right after registering the irq handler.
      Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      380ec964