- 15 6月, 2008 1 次提交
-
-
由 Brian Haley 提交于
Change struct proto destroy function pointer to return void. Noticed by Al Viro. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 6月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 6月, 2008 1 次提交
-
-
由 Denis V. Lunev 提交于
IPv6 UDP sockets wth IPv4 mapped address use udp_sendmsg to send the data actually. In this case ip_flush_pending_frames should be called instead of ip6_flush_pending_frames. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 02 5月, 2008 1 次提交
-
-
由 Denis V. Lunev 提交于
The check for PDE->data != NULL becomes useless after the replacement of proc_net_fops_create with proc_create_data. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
Plan C: we can follow the Al Viro's proposal about %n like in this patch. The same applies to udp, fib (the /proc/net/route file), rt_cache and sctp debug. This is minus ~150-200 bytes for each. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 4月, 2008 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
And use %u to format port. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2008 2 次提交
-
-
由 Pavel Emelyanov 提交于
This counter is about to become per-proto-and-per-net, so we'll need two arguments to determine which cell in this "table" to work with. All the places, but proc already pass proper net to it - proc will be tuned a bit later. Some indentation with spaces in proc files is done to keep the file coding style consistent. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2008 7 次提交
-
-
由 Denis V. Lunev 提交于
Move it to udp_seq_afinfo->seq_fops as should be. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
No need to have separate never-used variable. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Replace seq_open with seq_open_net and remove udp_seq_release completely. seq_release_net will do this job just fine. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
No need to create seq_operations for each instance of 'netstat'. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
udp_proc_register/udp_proc_unregister are called with a static pointer only. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
An uppercut - do not use the pcounter on struct proto. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2008 3 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 25 3月, 2008 3 次提交
-
-
由 Denis V. Lunev 提交于
Replace all the reast of the init_net with a proper net on the socket layer. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Pass the init_net there for now. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
After the commit a91275ef ([NETNS][IPV6] udp - make proc handle the network namespace) it is now possible to make this file present in newly created namespaces. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 3月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
After this we have only udp_lib_get_port to get the port and two stubs for ipv4 and ipv6. No difference in udp and udplite except for initialized h.udp_hash member. I tried to find a graceful way to drop the only difference between udp_v4_get_port and udp_v6_get_port (i.e. the rcv_saddr comparison routine), but adding one more callback on the struct proto didn't appear such :( Maybe later. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 3月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
Commits f40c81 ([NETNS][IPV4] tcp - make proc handle the network namespaces) and a91275 ([NETNS][IPV6] udp - make proc handle the network namespace) both introduced bad checks on sockets and tw buckets to belong to proper net namespace. I.e. when checking for socket to belong to given net and family the do { sk = sk_next(sk); } while (sk && sk->sk_net != net && sk->sk_family != family); constructions were used. This is wrong, since as soon as the sk->sk_net fits the net the socket is immediately returned, even if it belongs to other family. As the result four /proc/net/(udp|tcp)[6] entries show wrong info. The udp6 entry even oopses when dereferencing inet6_sk(sk) pointer: static void udp6_sock_seq_show(struct seq_file *seq, struct sock *sp, int bucket) { ... struct ipv6_pinfo *np = inet6_sk(sp); ... dest = &np->daddr; /* will be NULL for AF_INET sockets */ ... seq_printf(... dest->s6_addr32[0], dest->s6_addr32[1], dest->s6_addr32[2], dest->s6_addr32[3], ... Fix it by converting && to ||. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2008 2 次提交
-
-
由 Daniel Lezcano 提交于
The proc init/exit functions take a new network namespace parameter in order to register/unregister /proc/net/udp6 for a namespace. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
This patch makes the common udp proc functions to take care of which socket they should show taking into account the namespace it belongs. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2008 1 次提交
-
-
由 David S. Miller 提交于
This reverts commit db1ed684 ("[IPV6] UDP: Rename IPv6 UDP files."), commit 8be8af8f ("[IPV4] UDP: Move IPv4-specific bits to other file.") and commit e898d4db ("[UDP]: Allow users to configure UDP-Lite."). First, udplite is of such small cost, and it is a core protocol just like TCP and normal UDP are. We spent enormous amounts of effort to make udplite share as much code with core UDP as possible. All of that work is less valuable if we're just going to slap a config option on udplite support. It is also causing build failures, as reported on linux-next, showing that the changeset was not tested very well. In fact, this is the second build failure resulting from the udplite change. Finally, the config options provided was a bool, instead of a modular option. Meaning the udplite code does not even get build tested by allmodconfig builds, and furthermore the user is not presented with a reasonable modular build option which is particularly needed by distribution vendors. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2008 2 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Move IPv4-specific UDP bits from net/ipv4/udp.c into (new) net/ipv4/udp_ipv4.c. Rename net/ipv4/udplite.c to net/ipv4/udplite_ipv4.c. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Let's give users an option for disabling UDP-Lite (~4K). old: | text data bss dec hex filename | 286498 12432 6072 305002 4a76a net/ipv4/built-in.o | 193830 8192 3204 205226 321aa net/ipv6/ipv6.o new (without UDP-Lite): | text data bss dec hex filename | 284086 12136 5432 301654 49a56 net/ipv4/built-in.o | 191835 7832 3076 202743 317f7 net/ipv6/ipv6.o Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 01 2月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
Add the net parameter to udp_get_port family of calls and udp_lookup one and use it to filter sockets. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2008 11 次提交
-
-
由 Denis V. Lunev 提交于
Needed to propagate it down to the __ip_route_output_key. Signed_off_by: Denis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Fix following sparse warnings: | net/ipv4/udp.c:421:2: warning: returning void-valued expression | net/ipv4/udplite.c:38:2: warning: returning void-valued expression Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Eric Dumazet 提交于
1) Cleanups (all functions are prefixed by sock_prot_inuse) sock_prot_inc_use(prot) -> sock_prot_inuse_add(prot,-1) sock_prot_dec_use(prot) -> sock_prot_inuse_add(prot,-1) sock_prot_inuse() -> sock_prot_inuse_get() New functions : sock_prot_inuse_init() and sock_prot_inuse_free() to abstract pcounter use. 2) if CONFIG_PROC_FS=n, we can zap 'inuse' member from "struct proto", since nobody wants to read the inuse value. This saves 1372 bytes on i386/SMP and some cpu cycles. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add __acquires() and __releases() annotations to suppress some sparse warnings. example of warnings : net/ipv4/udp.c:1555:14: warning: context imbalance in 'udp_seq_start' - wrong count at exit net/ipv4/udp.c:1571:13: warning: context imbalance in 'udp_seq_stop' - unexpected unlock Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hideo Aoki 提交于
Signed-off-by: NTakahiro Yasui <tyasui@redhat.com> Signed-off-by: NHideo Aoki <haoki@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Now that external users may increment the counters directly, we need to ensure that udp_stats_in6 is always available. Otherwise we'd either have to requrie the external users to be built as modules or ipv6 to be built-in. This isn't too bad because udp_stats_in6 is just a pair of pointers plus an EXPORT, e.g., just 40 (16 + 24) bytes on x86-64. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The previous move of the the UDP inDatagrams counter caused each peek of the same packet to be counted separately. This may be undesirable. This patch fixes this by adding a bit to sk_buff to record whether this packet has already been seen through skb_recv_datagram. We then only increment the counter when the packet is seen for the first time. The only dodgy part is the fact that skb_recv_datagram doesn't have a good way of returning this new bit of information. So I've added a new function __skb_recv_datagram that does return this and made skb_recv_datagram a wrapper around it. The plan is to eventually replace all uses of skb_recv_datagram with this new function at which time it can be renamed its proper name. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The previous move of the the UDP inDatagrams counter caused the counting of encapsulated packets, SUNRPC data (as opposed to call) packets and RXRPC packets to go missing. This patch restores all of these. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Currently it is possible for two processes to peek on the same socket and end up incrementing the error counter twice for the same packet. This patch fixes it by making skb_kill_datagram return whether it succeeded in unlinking the packet and only incrementing the counter if it did. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
System calls should be USER. So change the BH to USER for UDP*_INC_STATS_BH(). Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-