- 31 7月, 2019 32 次提交
-
-
由 Sergey Organov 提交于
[ Upstream commit 4e828c3e09201512be5ee162393f334321f7cf01 ] imx_uart_set_termios() called imx_uart_rts_active(), or imx_uart_rts_inactive() before taking port->port.lock. As a consequence, sport->port.mctrl that these functions modify could have been changed without holding port->port.lock. Moved locking of port->port.lock above the calls to fix the issue. Signed-off-by: NSergey Organov <sorganov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Douglas Anderson 提交于
[ Upstream commit 99b9683f2142b20bad78e61f7f829e8714e45685 ] When fixing up the clock in vop_crtc_mode_fixup() we're not doing it quite correctly. Specifically if we've got the true clock 266666667 Hz, we'll perform this calculation: 266666667 / 1000 => 266666 Later when we try to set the clock we'll do clk_set_rate(266666 * 1000). The common clock framework won't actually pick the proper clock in this case since it always wants clocks <= the specified one. Let's solve this by using DIV_ROUND_UP. Fixes: b59b8de3 ("drm/rockchip: return a true clock rate to adjusted_mode") Signed-off-by: NDouglas Anderson <dianders@chromium.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NYakir Yang <ykk@rock-chips.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190614224730.98622-1-dianders@chromium.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
-
由 Nathan Lynch 提交于
[ Upstream commit e59a175faa8df9d674247946f2a5a9c29c835725 ] CPU online/offline code paths are sensitive to parts of the device tree (various cpu node properties, cache nodes) that can be changed as a result of a migration. Prevent CPU hotplug while the device tree potentially is inconsistent. Fixes: 410bccf9 ("powerpc/pseries: Partition migration in the kernel") Signed-off-by: NNathan Lynch <nathanl@linux.ibm.com> Reviewed-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Hariprasad Kelam 提交于
[ Upstream commit 88099f53cc3717437f5fc9cf84205c5b65118377 ] this patch fixes below compilation error drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In function ‘dcn10_apply_ctx_for_surface’: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:2378:3: error: implicit declaration of function ‘udelay’ [-Werror=implicit-function-declaration] udelay(underflow_check_delay_us); Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Yoshihiro Shimoda 提交于
[ Upstream commit d4a36e82924d3305a17ac987a510f3902df5a4b2 ] This patch fixes memory leak at error paths of the probe function. In for_each_child_of_node, if the loop returns, the driver should call of_put_node() before returns. Reported-by: NJulia Lawall <julia.lawall@lip6.fr> Fixes: 1233f59f ("phy: Renesas R-Car Gen2 PHY driver") Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 David Riley 提交于
[ Upstream commit 9ff3a5c88e1f1ab17a31402b96d45abe14aab9d7 ] After data is copied to the cache entry, atomic_set is used indicate that the data is the entry is valid without appropriate memory barriers. Similarly the read side was missing the corresponding memory barriers. Signed-off-by: NDavid Riley <davidriley@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190610211810.253227-5-davidriley@chromium.orgSigned-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Nicholas Kazlauskas 提交于
[ Upstream commit f04bee34d6e35df26cbb2d65e801adfd0d8fe20d ] [Why] Unlike our regular connectors, MST connectors don't start off with an initial connector state. This causes a NULL pointer dereference to occur when attaching the bpc property since it tries to modify the connector state. We need an initial connector state on the connector to avoid the crash. [How] Use our reset helper to allocate an initial state and reset the values to their defaults. We were already doing this before, just not for MST connectors. Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Rautkoski Kimmo EXT 提交于
[ Upstream commit db1b5bc047b3cadaedab3826bba82c3d9e023c4b ] Interrupt handler checked THRE bit (transmitter holding register empty) in LSR to detect if TX fifo is empty. In case when there is only receive interrupts the TX handling got called because THRE bit in LSR is set when there is no transmission (FIFO empty). TX handling caused TX stop, which in RS-485 half-duplex mode actually resets receiver FIFO. This is not desired during reception because of possible data loss. The fix is to check if THRI is set in IER in addition of the TX fifo status. THRI in IER is set when TX is started and cleared when TX is stopped. This ensures that TX handling is only called when there is really transmission on going and an interrupt for THRE and not when there are only RX interrupts. Signed-off-by: NKimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Jorge Ramirez-Ortiz 提交于
[ Upstream commit ba3684f99f1b25d2a30b6956d02d339d7acb9799 ] The function msm_wait_for_xmitr can be taken with interrupts disabled. In order to avoid a potential system lockup - demonstrated under stress testing conditions on SoC QCS404/5 - make sure we wait for a bounded amount of time. Tested on SoC QCS404. Signed-off-by: NJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Kefeng Wang 提交于
[ Upstream commit c7ad9ba0611c53cfe194223db02e3bca015f0674 ] When modprobe/rmmod/modprobe module, if platform_driver_register() fails, the kernel complained, proc_dir_entry 'driver/digicolor-usart' already registered WARNING: CPU: 1 PID: 5636 at fs/proc/generic.c:360 proc_register+0x19d/0x270 Fix this by adding uart_unregister_driver() when platform_driver_register() fails. Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com> Acked-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Wang Hai 提交于
[ Upstream commit 65f1a0d39c289bb6fc85635528cd36c4b07f560e ] If bus_register fails. On its error handling path, it has cleaned up what it has done. There is no need to call bus_unregister again. Otherwise, if bus_unregister is called, issues such as null-ptr-deref will arise. Syzkaller report this: kobject_add_internal failed for memstick (error: -12 parent: bus) BUG: KASAN: null-ptr-deref in sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467 Read of size 8 at addr 0000000000000078 by task syz-executor.0/4460 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 __kasan_report+0x171/0x18d mm/kasan/report.c:321 kasan_report+0xe/0x20 mm/kasan/common.c:614 sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467 sysfs_remove_file include/linux/sysfs.h:519 [inline] bus_remove_file+0x6c/0x90 drivers/base/bus.c:145 remove_probe_files drivers/base/bus.c:599 [inline] bus_unregister+0x6e/0x100 drivers/base/bus.c:916 ? 0xffffffffc1590000 memstick_init+0x7a/0x1000 [memstick] do_one_initcall+0xb9/0x3b5 init/main.c:914 do_init_module+0xe0/0x330 kernel/module.c:3468 load_module+0x38eb/0x4270 kernel/module.c:3819 __do_sys_finit_module+0x162/0x190 kernel/module.c:3909 do_syscall_64+0x72/0x2a0 arch/x86/entry/common.c:298 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: baf8532a ("memstick: initial commit for Sony MemoryStick support") Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NWang Hai <wanghai26@huawei.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Daniel Vetter 提交于
[ Upstream commit d99004d7201aa653658ff2390d6e516567c96ebc ] I. was. blind. Caught with vkms, which has some really slow crc computation function. Fixes: 1882018a70e0 ("drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry") Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NEmil Velikov <emil.velikov@collabora.com> Reviewed-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190606211544.5389-1-daniel.vetter@ffwll.chSigned-off-by: NSasha Levin <sashal@kernel.org>
-
由 Daniel Vetter 提交于
[ Upstream commit 1882018a70e06376234133e69ede9dd743b4dbd9 ] We can be called from any context, we need to be prepared. Noticed this while hacking on vkms, which calls this function from a normal worker. Which really upsets lockdep. Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190605194556.16744-1-daniel.vetter@ffwll.chSigned-off-by: NSasha Levin <sashal@kernel.org>
-
由 Thierry Reding 提交于
[ Upstream commit 1e390478cfb527e34c9ab89ba57212cb05c33c51 ] Recent versions of the DMA API debug code have started to warn about violations of the maximum DMA segment size. This is because the segment size defaults to 64 KiB, which can easily be exceeded in large buffer allocations such as used in DRM/KMS for framebuffers. Technically the Tegra SMMU and ARM SMMU don't have a maximum segment size (they map individual pages irrespective of whether they are contiguous or not), so the choice of 4 MiB is a bit arbitrary here. The maximum segment size is a 32-bit unsigned integer, though, so we can't set it to the correct maximum size, which would be the size of the aperture. Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Jyri Sarha 提交于
[ Upstream commit 8dbfc5b65023b67397aca28e8adb25c819f6398c ] The pixel clock unit in the first two registers (0x00 and 0x01) of sii9022 is 10kHz, not 1kHz as in struct drm_display_mode. Division by 10 fixes the issue. Signed-off-by: NJyri Sarha <jsarha@ti.com> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1a2a8eae0b9d6333e7a5841026bf7fd65c9ccd09.1558964241.git.jsarha@ti.comSigned-off-by: NSasha Levin <sashal@kernel.org>
-
由 Tomi Valkeinen 提交于
[ Upstream commit 3231573065ad4f4ecc5c9147b24f29f846dc0c2f ] We need to know the link bandwidth to filter out modes we cannot support, so we need to have read the display props before doing the filtering. To ensure we have up to date display props, call tc_get_display_props() in the beginning of tc_connector_get_modes(). Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-22-tomi.valkeinen@ti.comSigned-off-by: NSasha Levin <sashal@kernel.org>
-
由 Alex Williamson 提交于
[ Upstream commit 76002d8b48c4b08c9bd414517dd295e132ad910b ] Commit 0e7df224 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") allows the user to specify that drivers for VFs of a PF should not be probed, but it actually causes pci_device_probe() to return success back to the driver core in this case. Therefore by all sysfs appearances the device is bound to a driver, the driver link from the device exists as does the device link back from the driver, yet the driver's probe function is never called on the device. We also fail to do any sort of cleanup when we're prohibited from probing the device, the IRQ setup remains in place and we even hold a device reference. Instead, abort with errno before any setup or references are taken when pci_device_can_probe() prevents us from trying to probe the device. Link: https://lore.kernel.org/lkml/155672991496.20698.4279330795743262888.stgit@gimli.home Fixes: 0e7df224 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Gen Zhang 提交于
[ Upstream commit 9f1f1a2dab38d4ce87a13565cf4dc1b73bef3a5f ] In drm_load_edid_firmware(), fwstr is allocated by kstrdup(). And fwstr is dereferenced in the following codes. However, memory allocation functions such as kstrdup() may fail and returns NULL. Dereferencing this null pointer may cause the kernel go wrong. Thus we should check this kstrdup() operation. Further, if kstrdup() returns NULL, we should return ERR_PTR(-ENOMEM) to the caller site. Signed-off-by: NGen Zhang <blackgod016574@gmail.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524023222.GA5302@zhanggen-UX430UQSigned-off-by: NSasha Levin <sashal@kernel.org>
-
由 Oak Zeng 提交于
[ Upstream commit 065e4bdfa1f3ab2884c110394d8b7e7ebe3b988c ] Previous codes assumes there are two sdma engines. This is not true e.g., Raven only has 1 SDMA engine. Fix the issue by using sdma engine number info in device_info. Signed-off-by: NOak Zeng <Oak.Zeng@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Oak Zeng 提交于
[ Upstream commit e73390d181103a19e1111ec2f25559a0570e9fe0 ] Free mqd_mem_obj it GTT buffer allocation for MQD+control stack fails. Signed-off-by: NOak Zeng <ozeng@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Paul Hsieh 提交于
[ Upstream commit 1090d58d4815b1fcd95a80987391006c86398b4c ] [Why] When disable driver, OS will set backlight optimization then do stop device. But this flag will cause driver to enable ABM when driver disabled. [How] Send ABM disable command before destroy ABM construct Signed-off-by: NPaul Hsieh <paul.hsieh@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Tiecheng Zhou 提交于
[ Upstream commit fe2b5323d2c3cedaa3bf943dc7a0d233c853c914 ] it requires to initialize HDP_NONSURFACE_BASE, so as to avoid using the value left by a previous VM under sriov scenario. v2: it should not hurt baremetal, generalize it for both sriov and baremetal Signed-off-by: NEmily Deng <Emily.Deng@amd.com> Signed-off-by: NTiecheng Zhou <Tiecheng.Zhou@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Nicholas Kazlauskas 提交于
[ Upstream commit 1352c779cb74d427f4150cbe779a2f7886f70cae ] [Why] An assertion is thrown when using SURFACE_PIXEL_FORMAT_GRPH_RGB565 formats on DCE since the prescale_params->scale wasn't being filled. Found by a dmesg-fail when running the igt@kms_plane@pixel-format-pipe-a-planes test on Baffin. [How] Fill in the scale parameter. Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: NRoman Li <Roman.Li@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Christophe Leroy 提交于
[ Upstream commit 06aaa3d066db87e8478522d910285141d44b1e58 ] SMC relocation can also be activated earlier by the bootloader, so the driver's behaviour cannot rely on selected kernel config. When the SMC is relocated, CPM_CR_INIT_TRX cannot be used. But the only thing CPM_CR_INIT_TRX does is to clear the rstate and tstate registers, so this can be done manually, even when SMC is not relocated. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Fixes: 9ab92120 ("cpm_uart: fix non-console port startup bug") Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Wen Yang 提交于
[ Upstream commit 3c89c70634bb0b6f48512de873e7a45c7e1fbaa5 ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/pinctrl-rockchip.c:3221:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3196, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-rockchip.c:3223:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3196, but without a corresponding object release within this function. Signed-off-by: NWen Yang <wen.yang99@zte.com.cn> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-gpio@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Serge Semin 提交于
[ Upstream commit 35240ba26a932b279a513f66fa4cabfd7af55221 ] Current calculator doesn't do it' job quite correct. First of all the max310x baud-rates generator supports the divisor being less than 16. In this case the x2/x4 modes can be used to double or quadruple the reference frequency. But the current baud-rate setter function just filters all these modes out by the first condition and setups these modes only if there is a clocks-baud division remainder. The former doesn't seem right at all, since enabling the x2/x4 modes causes the line noise tolerance reduction and should be only used as a last resort to enable a requested too high baud-rate. Finally the fraction is supposed to be calculated from D = Fref/(c*baud) formulae, but not from D % 16, which causes the precision loss. So to speak the current baud-rate calculator code works well only if the baud perfectly fits to the uart reference input frequency. Lets fix the calculator by implementing the algo fully compliant with the fractional baud-rate generator described in the datasheet: D = Fref / (c*baud), where c={16,8,4} is the x1/x2/x4 rate mode respectively, Fref - reference input frequency. The divisor fraction is calculated from the same formulae, but making sure it is found with a resolution of 0.0625 (four bits). Signed-off-by: NSerge Semin <fancer.lancer@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Thinh Nguyen 提交于
[ Upstream commit 561759292774707b71ee61aecc07724905bb7ef1 ] If the device rejects the control transfer to enable device-initiated U1/U2 entry, then the device will not initiate U1/U2 transition. To improve the performance, the downstream port should not initate transition to U1/U2 to avoid the delay from the device link command response (no packet can be transmitted while waiting for a response from the device). If the device has some quirks and does not implement U1/U2, it may reject all the link state change requests, and the downstream port may resend and flood the bus with more requests. This will affect the device performance even further. This patch disables the hub-initated U1/U2 if the device-initiated U1/U2 entry fails. Reference: USB 3.2 spec 7.2.4.2.3 Signed-off-by: NThinh Nguyen <thinhn@synopsys.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Quentin Deslandes 提交于
[ Upstream commit d8c2869300ab5f7a19bf6f5a04fe473c5c9887e3 ] Check on called function's returned value for error and return 0 on success or a negative errno value on error instead of a boolean value. Signed-off-by: NQuentin Deslandes <quentin.deslandes@itdev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Fabien Dessenne 提交于
[ Upstream commit d2fc0156963cae8f1eec8e2dd645fbbf1e1c1c8e ] During probe, check the devm_ioremap_resource() error value. Also return the devm_clk_get() error value instead of -EINVAL. Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com> Acked-by: NFabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Fabien Dessenne 提交于
[ Upstream commit 3e53ef91f826957dec013c47707ffc1bb42b42d7 ] During probe, check the "get_irq" error value. Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com> Acked-by: NFabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Peter Ujfalusi 提交于
[ Upstream commit 7ad9db66fafb0f0ad53fd2a66217105da5ddeffe ] In case mipi_dsi_attach() fails remove the registered panel to avoid added panel without corresponding device. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190226081153.31334-1-peter.ujfalusi@ti.comSigned-off-by: NSasha Levin <sashal@kernel.org>
-
由 Sunil Muthuswamy 提交于
[ Upstream commit cb359b60416701c8bed82fec79de25a144beb893 ] Currently, hvsock can enter into a state where epoll_wait on EPOLLOUT will not return even when the hvsock socket is writable, under some race condition. This can happen under the following sequence: - fd = socket(hvsocket) - fd_out = dup(fd) - fd_in = dup(fd) - start a writer thread that writes data to fd_out with a combination of epoll_wait(fd_out, EPOLLOUT) and - start a reader thread that reads data from fd_in with a combination of epoll_wait(fd_in, EPOLLIN) - On the host, there are two threads that are reading/writing data to the hvsocket stack: hvs_stream_has_space hvs_notify_poll_out vsock_poll sock_poll ep_poll Race condition: check for epollout from ep_poll(): assume no writable space in the socket hvs_stream_has_space() returns 0 check for epollin from ep_poll(): assume socket has some free space < HVS_PKT_LEN(HVS_SEND_BUF_SIZE) hvs_stream_has_space() will clear the channel pending send size host will not notify the guest because the pending send size has been cleared and so the hvsocket will never mark the socket writable Now, the EPOLLOUT will never return even if the socket write buffer is empty. The fix is to set the pending size to the default size and never change it. This way the host will always notify the guest whenever the writable space is bigger than the pending size. The host is already optimized to *only* notify the guest when the pending size threshold boundary is crossed and not everytime. This change also reduces the cpu usage somewhat since hv_stream_has_space() is in the hotpath of send: vsock_stream_sendmsg()->hv_stream_has_space() Earlier hv_stream_has_space was setting/clearing the pending size on every call. Signed-off-by: NSunil Muthuswamy <sunilmut@microsoft.com> Reviewed-by: NDexuan Cui <decui@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
- 28 7月, 2019 8 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Vlad Buslov 提交于
commit 503d81d428bd598430f7f9d02021634e1a8139a0 upstream. In function int tc_new_tfilter() q pointer can be NULL when adding filter on a shared block. With recent change that resets TCQ_F_CAN_BYPASS after filter creation, following NULL pointer dereference happens in case parent block is shared: [ 212.925060] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 212.925445] #PF: supervisor write access in kernel mode [ 212.925709] #PF: error_code(0x0002) - not-present page [ 212.925965] PGD 8000000827923067 P4D 8000000827923067 PUD 827924067 PMD 0 [ 212.926302] Oops: 0002 [#1] SMP KASAN PTI [ 212.926539] CPU: 18 PID: 2617 Comm: tc Tainted: G B 5.2.0+ #512 [ 212.926938] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 212.927364] RIP: 0010:tc_new_tfilter+0x698/0xd40 [ 212.927633] Code: 74 0d 48 85 c0 74 08 48 89 ef e8 03 aa 62 00 48 8b 84 24 a0 00 00 00 48 8d 78 10 48 89 44 24 18 e8 4d 0c 6b ff 48 8b 44 24 18 <83> 60 10 f b 48 85 ed 0f 85 3d fe ff ff e9 4f fe ff ff e8 81 26 f8 [ 212.928607] RSP: 0018:ffff88884fd5f5d8 EFLAGS: 00010296 [ 212.928905] RAX: 0000000000000000 RBX: 0000000000000000 RCX: dffffc0000000000 [ 212.929201] RDX: 0000000000000007 RSI: 0000000000000004 RDI: 0000000000000297 [ 212.929402] RBP: ffff88886bedd600 R08: ffffffffb91d4b51 R09: fffffbfff7616e4d [ 212.929609] R10: fffffbfff7616e4c R11: ffffffffbb0b7263 R12: ffff88886bc61040 [ 212.929803] R13: ffff88884fd5f950 R14: ffffc900039c5000 R15: ffff88835e927680 [ 212.929999] FS: 00007fe7c50b6480(0000) GS:ffff88886f980000(0000) knlGS:0000000000000000 [ 212.930235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 212.930394] CR2: 0000000000000010 CR3: 000000085bd04002 CR4: 00000000001606e0 [ 212.930588] Call Trace: [ 212.930682] ? tc_del_tfilter+0xa40/0xa40 [ 212.930811] ? __lock_acquire+0x5b5/0x2460 [ 212.930948] ? find_held_lock+0x85/0xa0 [ 212.931081] ? tc_del_tfilter+0xa40/0xa40 [ 212.931201] rtnetlink_rcv_msg+0x4ab/0x5f0 [ 212.931332] ? rtnl_dellink+0x490/0x490 [ 212.931454] ? lockdep_hardirqs_on+0x260/0x260 [ 212.931589] ? netlink_deliver_tap+0xab/0x5a0 [ 212.931717] ? match_held_lock+0x1b/0x240 [ 212.931844] netlink_rcv_skb+0xd0/0x200 [ 212.931958] ? rtnl_dellink+0x490/0x490 [ 212.932079] ? netlink_ack+0x440/0x440 [ 212.932205] ? netlink_deliver_tap+0x161/0x5a0 [ 212.932335] ? lock_downgrade+0x360/0x360 [ 212.932457] ? lock_acquire+0xe5/0x210 [ 212.932579] netlink_unicast+0x296/0x350 [ 212.932705] ? netlink_attachskb+0x390/0x390 [ 212.932834] ? _copy_from_iter_full+0xe0/0x3a0 [ 212.932976] netlink_sendmsg+0x394/0x600 [ 212.937998] ? netlink_unicast+0x350/0x350 [ 212.943033] ? move_addr_to_kernel.part.0+0x90/0x90 [ 212.948115] ? netlink_unicast+0x350/0x350 [ 212.953185] sock_sendmsg+0x96/0xa0 [ 212.958099] ___sys_sendmsg+0x482/0x520 [ 212.962881] ? match_held_lock+0x1b/0x240 [ 212.967618] ? copy_msghdr_from_user+0x250/0x250 [ 212.972337] ? lock_downgrade+0x360/0x360 [ 212.976973] ? rwlock_bug.part.0+0x60/0x60 [ 212.981548] ? __mod_node_page_state+0x1f/0xa0 [ 212.986060] ? match_held_lock+0x1b/0x240 [ 212.990567] ? find_held_lock+0x85/0xa0 [ 212.994989] ? do_user_addr_fault+0x349/0x5b0 [ 212.999387] ? lock_downgrade+0x360/0x360 [ 213.003713] ? find_held_lock+0x85/0xa0 [ 213.007972] ? __fget_light+0xa1/0xf0 [ 213.012143] ? sockfd_lookup_light+0x91/0xb0 [ 213.016165] __sys_sendmsg+0xba/0x130 [ 213.020040] ? __sys_sendmsg_sock+0xb0/0xb0 [ 213.023870] ? handle_mm_fault+0x337/0x470 [ 213.027592] ? page_fault+0x8/0x30 [ 213.031316] ? lockdep_hardirqs_off+0xbe/0x100 [ 213.034999] ? mark_held_locks+0x24/0x90 [ 213.038671] ? do_syscall_64+0x1e/0xe0 [ 213.042297] do_syscall_64+0x74/0xe0 [ 213.045828] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 213.049354] RIP: 0033:0x7fe7c527c7b8 [ 213.052792] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f 0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 213.060269] RSP: 002b:00007ffc3f7908a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 213.064144] RAX: ffffffffffffffda RBX: 000000005d34716f RCX: 00007fe7c527c7b8 [ 213.068094] RDX: 0000000000000000 RSI: 00007ffc3f790910 RDI: 0000000000000003 [ 213.072109] RBP: 0000000000000000 R08: 0000000000000001 R09: 00007fe7c5340cc0 [ 213.076113] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000080 [ 213.080146] R13: 0000000000480640 R14: 0000000000000080 R15: 0000000000000000 [ 213.084147] Modules linked in: act_gact cls_flower sch_ingress nfsv3 nfs_acl nfs lockd grace fscache bridge stp llc sunrpc intel_rapl_msr intel_rapl_common [<1;69;32Msb_edac rdma_ucm rdma_cm x86_pkg_temp_thermal iw_cm intel_powerclamp ib_cm coretemp kvm_intel kvm irqbypass mlx5_ib ib_uverbs ib_core crct10dif_pclmul crc32_pc lmul crc32c_intel ghash_clmulni_intel mlx5_core intel_cstate intel_uncore iTCO_wdt igb iTCO_vendor_support mlxfw mei_me ptp ses intel_rapl_perf mei pcspkr ipmi _ssif i2c_i801 joydev enclosure pps_core lpc_ich ioatdma wmi dca ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter acpi_pad ast i2c_algo_bit drm_vram_helpe r ttm drm_kms_helper drm mpt3sas raid_class scsi_transport_sas [ 213.112326] CR2: 0000000000000010 [ 213.117429] ---[ end trace adb58eb0a4ee6283 ]--- Verify that q pointer is not NULL before setting the 'flags' field. Fixes: 3f05e6886a59 ("net_sched: unset TCQ_F_CAN_BYPASS when adding filters") Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kuo-Hsin Yang 提交于
commit 2c012a4ad1a2cd3fb5a0f9307b9d219f84eda1fa upstream. When file refaults are detected and there are many inactive file pages, the system never reclaim anonymous pages, the file pages are dropped aggressively when there are still a lot of cold anonymous pages and system thrashes. This issue impacts the performance of applications with large executable, e.g. chrome. With this patch, when file refault is detected, inactive_list_is_low() always returns true for file pages in get_scan_count() to enable scanning anonymous pages. The problem can be reproduced by the following test program. ---8<--- void fallocate_file(const char *filename, off_t size) { struct stat st; int fd; if (!stat(filename, &st) && st.st_size >= size) return; fd = open(filename, O_WRONLY | O_CREAT, 0600); if (fd < 0) { perror("create file"); exit(1); } if (posix_fallocate(fd, 0, size)) { perror("fallocate"); exit(1); } close(fd); } long *alloc_anon(long size) { long *start = malloc(size); memset(start, 1, size); return start; } long access_file(const char *filename, long size, long rounds) { int fd, i; volatile char *start1, *end1, *start2; const int page_size = getpagesize(); long sum = 0; fd = open(filename, O_RDONLY); if (fd == -1) { perror("open"); exit(1); } /* * Some applications, e.g. chrome, use a lot of executable file * pages, map some of the pages with PROT_EXEC flag to simulate * the behavior. */ start1 = mmap(NULL, size / 2, PROT_READ | PROT_EXEC, MAP_SHARED, fd, 0); if (start1 == MAP_FAILED) { perror("mmap"); exit(1); } end1 = start1 + size / 2; start2 = mmap(NULL, size / 2, PROT_READ, MAP_SHARED, fd, size / 2); if (start2 == MAP_FAILED) { perror("mmap"); exit(1); } for (i = 0; i < rounds; ++i) { struct timeval before, after; volatile char *ptr1 = start1, *ptr2 = start2; gettimeofday(&before, NULL); for (; ptr1 < end1; ptr1 += page_size, ptr2 += page_size) sum += *ptr1 + *ptr2; gettimeofday(&after, NULL); printf("File access time, round %d: %f (sec) ", i, (after.tv_sec - before.tv_sec) + (after.tv_usec - before.tv_usec) / 1000000.0); } return sum; } int main(int argc, char *argv[]) { const long MB = 1024 * 1024; long anon_mb, file_mb, file_rounds; const char filename[] = "large"; long *ret1; long ret2; if (argc != 4) { printf("usage: thrash ANON_MB FILE_MB FILE_ROUNDS "); exit(0); } anon_mb = atoi(argv[1]); file_mb = atoi(argv[2]); file_rounds = atoi(argv[3]); fallocate_file(filename, file_mb * MB); printf("Allocate %ld MB anonymous pages ", anon_mb); ret1 = alloc_anon(anon_mb * MB); printf("Access %ld MB file pages ", file_mb); ret2 = access_file(filename, file_mb * MB, file_rounds); printf("Print result to prevent optimization: %ld ", *ret1 + ret2); return 0; } ---8<--- Running the test program on 2GB RAM VM with kernel 5.2.0-rc5, the program fills ram with 2048 MB memory, access a 200 MB file for 10 times. Without this patch, the file cache is dropped aggresively and every access to the file is from disk. $ ./thrash 2048 200 10 Allocate 2048 MB anonymous pages Access 200 MB file pages File access time, round 0: 2.489316 (sec) File access time, round 1: 2.581277 (sec) File access time, round 2: 2.487624 (sec) File access time, round 3: 2.449100 (sec) File access time, round 4: 2.420423 (sec) File access time, round 5: 2.343411 (sec) File access time, round 6: 2.454833 (sec) File access time, round 7: 2.483398 (sec) File access time, round 8: 2.572701 (sec) File access time, round 9: 2.493014 (sec) With this patch, these file pages can be cached. $ ./thrash 2048 200 10 Allocate 2048 MB anonymous pages Access 200 MB file pages File access time, round 0: 2.475189 (sec) File access time, round 1: 2.440777 (sec) File access time, round 2: 2.411671 (sec) File access time, round 3: 1.955267 (sec) File access time, round 4: 0.029924 (sec) File access time, round 5: 0.000808 (sec) File access time, round 6: 0.000771 (sec) File access time, round 7: 0.000746 (sec) File access time, round 8: 0.000738 (sec) File access time, round 9: 0.000747 (sec) Checked the swap out stats during the test [1], 19006 pages swapped out with this patch, 3418 pages swapped out without this patch. There are more swap out, but I think it's within reasonable range when file backed data set doesn't fit into the memory. $ ./thrash 2000 100 2100 5 1 # ANON_MB FILE_EXEC FILE_NOEXEC ROUNDS PROCESSES Allocate 2000 MB anonymous pages active_anon: 1613644, inactive_anon: 348656, active_file: 892, inactive_file: 1384 (kB) pswpout: 7972443, pgpgin: 478615246 Access 100 MB executable file pages Access 2100 MB regular file pages File access time, round 0: 12.165, (sec) active_anon: 1433788, inactive_anon: 478116, active_file: 17896, inactive_file: 24328 (kB) File access time, round 1: 11.493, (sec) active_anon: 1430576, inactive_anon: 477144, active_file: 25440, inactive_file: 26172 (kB) File access time, round 2: 11.455, (sec) active_anon: 1427436, inactive_anon: 476060, active_file: 21112, inactive_file: 28808 (kB) File access time, round 3: 11.454, (sec) active_anon: 1420444, inactive_anon: 473632, active_file: 23216, inactive_file: 35036 (kB) File access time, round 4: 11.479, (sec) active_anon: 1413964, inactive_anon: 471460, active_file: 31728, inactive_file: 32224 (kB) pswpout: 7991449 (+ 19006), pgpgin: 489924366 (+ 11309120) With 4 processes accessing non-overlapping parts of a large file, 30316 pages swapped out with this patch, 5152 pages swapped out without this patch. The swapout number is small comparing to pgpgin. [1]: https://github.com/vovo/testing/blob/master/mem_thrash.c Link: http://lkml.kernel.org/r/20190701081038.GA83398@google.com Fixes: e9868505 ("mm,vmscan: only evict file pages when we have plenty") Fixes: 7c5bd705 ("mm: memcg: only evict file pages when we have plenty") Signed-off-by: NKuo-Hsin Yang <vovoy@chromium.org> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Rik van Riel <riel@redhat.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> [4.12+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> [backported to 4.14.y, 4.19.y, 5.1.y: adjust context] Signed-off-by: NKuo-Hsin Yang <vovoy@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jan Kiszka 提交于
commit cf64527bb33f6cec2ed50f89182fc4688d0056b6 upstream. Letting this pend may cause nested_get_vmcs12_pages to run against an invalid state, corrupting the effective vmcs of L1. This was triggerable in QEMU after a guest corruption in L2, followed by a L1 reset. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Reviewed-by: NLiran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Fixes: 7f7f1ba3 ("KVM: x86: do not load vmcs12 pages while still in SMM") Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Paolo Bonzini 提交于
commit 88dddc11a8d6b09201b4db9d255b3394d9bc9e57 upstream. If a KVM guest is reset while running a nested guest, free_nested will disable the shadow VMCS execution control in the vmcs01. However, on the next KVM_RUN vmx_vcpu_run would nevertheless try to sync the VMCS12 to the shadow VMCS which has since been freed. This causes a vmptrld of a NULL pointer on my machime, but Jan reports the host to hang altogether. Let's see how much this trivial patch fixes. Reported-by: NJan Kiszka <jan.kiszka@siemens.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Theodore Ts'o 提交于
commit 4e19d6b65fb4fc42e352ce9883649e049da14743 upstream. The largedir feature was intended to allow ext4 directories to have unmapped directory blocks (e.g., directory holes). And so the released e2fsprogs no longer enforces this for largedir file systems; however, the corresponding change to the kernel-side code was not made. This commit fixes this oversight. Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ross Zwisler 提交于
commit 73131fbb003b3691cfcf9656f234b00da497fcd6 upstream. Use the newly introduced jbd2_inode dirty range scoping to prevent us from waiting forever when trying to complete a journal transaction. Signed-off-by: NRoss Zwisler <zwisler@google.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ross Zwisler 提交于
commit 6ba0e7dc64a5adcda2fbe65adc466891795d639e upstream. Currently both journal_submit_inode_data_buffers() and journal_finish_inode_data_buffers() operate on the entire address space of each of the inodes associated with a given journal entry. The consequence of this is that if we have an inode where we are constantly appending dirty pages we can end up waiting for an indefinite amount of time in journal_finish_inode_data_buffers() while we wait for all the pages under writeback to be written out. The easiest way to cause this type of workload is do just dd from /dev/zero to a file until it fills the entire filesystem. This can cause journal_finish_inode_data_buffers() to wait for the duration of the entire dd operation. We can improve this situation by scoping each of the inode dirty ranges associated with a given transaction. We do this via the jbd2_inode structure so that the scoping is contained within jbd2 and so that it follows the lifetime and locking rules for that structure. This allows us to limit the writeback & wait in journal_submit_inode_data_buffers() and journal_finish_inode_data_buffers() respectively to the dirty range for a given struct jdb2_inode, keeping us from waiting forever if the inode in question is still being appended to. Signed-off-by: NRoss Zwisler <zwisler@google.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-