* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (22 commits)
  MIPS: Return after handling coprocessor 2 exception
  MIPS: BCM47xx: Add NVRAM support devices
  MIPS: Loongson: Define rtc device on MC146818-equipped systems
  MIPS: MT: Fix FPU affinity.
  MIPS: Oprofile: Fixup of loongson2_exit()
  MIPS: Alchemy: sleepcode without compile-time cputype dependencies
  MIPS: Tracing: Cleanup of address space checking
  MIPS: Tracing: Cleanup of function graph tracer
  MIPS: Tracing: Reduce the overhead of dynamic Function Tracer
  MIPS: Tracing: Cleanup of instructions used
  MIPS: Tracing: Fix 32-bit support with -mmcount-ra-address
  MIPS: Tracing: Fix argument passing of the 32bit support with gcc 4.5
  MIPS: Tracing: Cleanup comments
  MIPS: Tracing: Cleanup the arguments passing of prepare_ftrace_return
  MIPS: Tracing: Merge adjacent #ifdefs with same condition.
  MIPS: AR7, BCM63xx: fix gpio_to_irq() return value
  MIPS: Restore signalling NaN behaviour for abs.[sd]
  MIPS: Loongson: CS5536: Fix ISA support
  MIPS: Loongson: Add a missing break statement in CS5536 IDE code
  MIPS: Loongson: CS5536: Add missing RDMSRs for IDE and USB
  ...

Commit 0a564b26 broke LOCALVERSION for O=... builds. Ouch.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reported-and-tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-by: NPeter Anvin <hpa@zytor.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Breaking here dropped us to the default code which always sends a SIGILL
to the current process, no matter what the CU2 notifier says.

[Ralf: Currently this only hurts on Cavium and possibly some out of tree
platforms.]
Signed-off-by: NJesper Nilsson <jesper@jni.nu>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1391/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When trying to netboot a Linksys WRT54GS WLAN router, the bootup fails,
because of following error message:

...
[    0.424000] b44: b44.c:v2.0
[    0.424000] b44: Invalid MAC address found in EEPROM
[    0.432000] b44 ssb0:1: Problem fetching invariants of chip,aborting
[    0.436000] b44: probe of ssb0:1 failed with error -22
...

The router uses a CFE bootloader, but most of the needed environment
variables for network card initialization, are not available from CFE
via printenv and even though not via cfe_getenv().
The required environment variables are saved in a special partition
in flash memory. The attached patch implement nvram_getenv and enables
bootup via NFS root on my router.

Most of the patch is extracted from the OpenWrt subversion repository and
stripped down and cleaned up to just fix this issue.

[Ralf: sorted out header file inclusions.  Lots of unneded headers and such
that should have been included.]
Signed-off-by: NWaldemar Brodkorb <wbx@openadk.org>
Reviewed-by: NPhil Sutter <phil@nwl.cc>
To: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: http://patchwork.linux-mips.org/patch/1359/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch declare the rtc device present on systems with clock compatible
with the mc146818 and handled by rtc-cmos.  Introduce a new Kconfig entry
because there are some systems without rtc_cmos compatible clock.
Signed-off-by: NArnaud Patard <apatard@mandriva.com>
To: linux-mips@linux-mips.org
Cc: aba@not.so.argh.org
Patchwork: http://patchwork.linux-mips.org/patch/1320/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The fragile MT sys_sched_setaffinity wrapper needs its regular dose of
fixes.
Nose-poked-at-pile-o-crap-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When exiting from loongson2_exit(), we need to reset the counter
register too, this patch adds a function reset_counters() to do it, by
the way, this function will be shared by Perf.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1199/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Split the low-level sleepcode into per-cpu functions instead of
relying on compile-time-defined cpu type.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1281/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds an inline function in_module() to check which space the
instruction pointer in, kernel space or module space.

Note:  This will not work when the kernel space and module space are the
same. If they are the same, we need to modify scripts/recordmcount.pl,
ftrace_make_nop/call() and the other related parts to ensure the
enabling/disabling of the calling site to _mcount is right for both
kernel and module.

[Ralf: It also is still incorrect for some 64-bit kernels.]
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Cc: David Daney <david.s.daney@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/1232/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Cleans up comments and ftrace_get_parent_addr() of function graph tracer.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Cc: David Daney <david.s.daney@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/1231/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

With the help of uasm this patch encodes the instructions of the dynamic
function tracer in ftrace_dyn_arch_init() when initializing it.

As a result we can remove the dynamic encoding of instructions in
ftrace_make_nop()/call(), ftrace_enable_ftrace_graph_caller() and remove
the macro jump_insn_encode() and at last this reduce the overhead of
dynamic Function Tracer.  This also is cleaner.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Cc: David Daney <david.s.daney@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/1230/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds some cleanups of the instructions:
  o use macros instead of magic numbers
  o use macros instead of variables to reduce some overhead
  o add new macro for the jal instruction
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Cc: David Daney <david.s.daney@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/1229/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

For 32-bit kernel the -mmcount-ra-address option of gcc 4.5 emits one
extra instruction before calling to _mcount so we need to use a different
"b 1f" for it.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Cc: David Daney <david.s.daney@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/1228/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As documented in the GCC 4.5 docs [1] -mmcount-ra-address uses register
$12 to pass the stack offset of the return address to the _mcount function.
On 64-bit kernels $12 is t0 but in 32-bit kernels it is t4 so we need to
use $12 instead of t0 here to be correct for both kernel types.

[1] GCC documentation: MIPS Options
http://gcc.gnu.org/onlinedocs/gcc/MIPS-Options.htmlSigned-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Cc: David Daney <david.s.daney@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/1227/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Cc: David Daney <david.s.daney@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/1225/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Cc: David Daney <david.s.daney@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/1226/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Cc: David Daney <david.s.daney@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/1224/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The return value of gpio_to_irq() is not a pointer but an integer.
Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1280/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Atsushi Nemoto <anemo@mba.ocn.ne.jp> spotted that this had been incorrectly
removed in a previous patch
Signed-off-by: NChris Dearman <chris@mips.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1213/Tested-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The function _wrmsr() called by divil_lbar_disable()/enable() should be
called with the offset as the argument.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Zhang Le <r0bertz@gentoo.org>
Patchwork: http://patchwork.linux-mips.org/patch/1252/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Zhang Le <r0bertz@gentoo.org>
Cc: Hu Hongbing <huhb@lemote.com>
Patchwork: http://patchwork.linux-mips.org/patch/1251/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add several missing RDMSRs for IDE and USB are missing to avoid the
agressive modification of the high 32 bits of the MSR.

Without this patch some usb devices may fail after printing "reset ehci
host ....." when reading the partition information.
Signed-off-by: NHu Hongbing <huhb@lemote.com>
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Zhang Le <r0bertz@gentoo.org>
Cc: Hu Hongbing <huhb@lemote.com>
Patchwork: http://patchwork.linux-mips.org/patch/1250/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This fixes a typo on the AR7_RESET_PERIPHERAL define.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1247/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

PORT_AR7 has the correct TRIG flag (UART_FCR_R_TRIG_00) as well as
UART_CAP_AFE being set. This fixes UART on TNETD7300 revision 0x02,
which would otherwise mangle some characters, no side effects on
other revisions.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1246/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6205/1: perf: ensure counter delta is treated as unsigned
  ARM: 6202/1: Do not ARM_DMA_MEM_BUFFERABLE on RealView boards with L210/L220
  ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220
  ARM: 6195/1: OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMU
  ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore
  ARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB section
  ARM: 6192/1: VExpress: Align the machine_desc.phys_io to 1MB section
  ARM: 6188/1: Add a config option for the ARM11MPCore DMA cache maintenance workaround
  ARM: 6187/1: The v6_dma_inv_range() function must preserve data on SMP
  ARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds
  ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI
  [ARM] mmp: fix build failure due to IRQ_PMU depends on ARCH_PXA
  [ARM] pxa/mioa701: fix camera regression
  [ARM] pxa/z2: fix flash layout to final version
  [ARM] pxa/z2: fix missing include in battery driver
  [ARM] pxa: fix incorrect gpio type in udc_pxa2xx.h

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Fix incorrect branches event on AMD CPUs
  perf tools: Fix find tids routine by excluding "." and ".."
  x86: Send a SIGTRAP for user icebp traps

We should initialize the module dynamic debug datastructures
only after determining that the module is not loaded yet. This
fixes a bug that introduced in 2.6.35-rc2, where when a trying
to load a module twice, we also load it's dynamic printing data
twice which causes all sorts of nasty issues. Also handle
the dynamic debug cleanup later on failure.
Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (removed a #ifdef)
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: remove block number from inode lookup code
  xfs: rename XFS_IGET_BULKSTAT to XFS_IGET_UNTRUSTED
  xfs: validate untrusted inode numbers during lookup
  xfs: always use iget in bulkstat
  xfs: prevent swapext from operating on write-only files

* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  of/dma: fix build breakage in ppc4xx adma driver

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core:
  MAINTAINERS: Add an entry for i7core_edac
  i7core_edac: Avoid doing multiple probes for the same card
  i7core_edac: Properly discover the first QPI device

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: Propagate LOCALVERSION= down to scripts/setlocalversion
  kbuild: Clean up and speed up the localversion logic

Hardware performance counters on ARM are 32-bits wide but atomic64_t
variables are used to represent counter data in the hw_perf_event structure.

The armpmu_event_update function right-shifts a signed 64-bit delta variable
and adds the result to the event count. This can lead to shifting in sign-bits
if the MSB of the 32-bit counter value is set. This results in perf output
such as:

 Performance counter stats for 'sleep 20':

 18446744073460670464  cycles             <-- 0xFFFFFFFFF12A6000
        7783773  instructions             #      0.000 IPC
            465  context-switches
            161  page-faults
        1172393  branches

   20.154242147  seconds time elapsed

This patch ensures that the delta value is treated as unsigned so that the
right shift sets the upper bits to zero.

Cc: <stable@kernel.org>
Acked-by: NJamie Iles <jamie.iles@picochip.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

While doing some performance counter validation tests on some
assembly language programs I noticed that the "branches:u"
count was very wrong on AMD machines.

It looks like the wrong event was selected.
Signed-off-by: NVince Weaver <vweaver1@eecs.utk.edu>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <alpine.DEB.2.00.1007011526010.23160@cl320.eecs.utk.edu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Convert ppc4xx adma driver to use new node pointer location
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Acked-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

While here, fixes the mailing list for i5400_edac
Acked-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As Nehalem/Nehalem-EP/Westmere devices uses several devices for the same
functionality (memory controller), the default way of proping devices doesn't
work. So, instead of a per-device probe, all devices should be probed at once.

This means that we should block any new attempt of probe, otherwise, it will
try to register the same device several times.
Acked-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On Nehalem/Nehalem-EP/Westmere, the first QPI device is the last PCI bus.
The last bus is generally at 0x3f or 0xff, but there are also other systems
using different setups. For example, HP Z800 has 0x7f as the last bus.

This patch adds a logic to discover the last bus, dynamically detecting it
at runtime.
Acked-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Cure nr_iowait_cpu() users
  init: Fix comment
  init, sched: Fix race between init and kthreadd

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Fix syndrome calculation on K8