System management wants to subscribe to changes in swap configuration.
Make /proc/swaps pollable like /proc/mounts.

[akpm@linux-foundation.org: document proc_poll_event]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Acked-by: NGreg KH <greg@kroah.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add vzalloc() and vzalloc_node() to encapsulate the
vmalloc-then-memset-zero operation.

Use __GFP_ZERO to zero fill the allocated memory.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: NGreg Ungerer <gerg@snapgear.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reported-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I had to go back to a 2.6.20 tree to work out why we're adding a
number-of-inodes into a number-of-pages count.  Restore the lost comment.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce ___GFP_* masks in order for gfp_t to not be mixed with plain
integers which causes a lot of warnings like the following:

 warning: restricted gfp_t degrades to integer
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This removes following warning from sparse:

 mm/vmstat.c:466:5: warning: symbol 'fragmentation_index' was not declared. Should it be static?

[akpm@linux-foundation.org: move the include to top-of-file]
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Declare 'bdi_pending_list' and 'tag_pages_for_writeback()' to remove
following sparse warnings:

 mm/backing-dev.c:46:1: warning: symbol 'bdi_pending_list' was not declared. Should it be static?
 mm/page-writeback.c:825:6: warning: symbol 'tag_pages_for_writeback' was not declared. Should it be static?
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

s_start() and s_stop() grab/release vmlist_lock but were missing proper
annotations.  Add them.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename redundant 'tmp' to fix following sparse warnings:

 mm/vmalloc.c:296:34: warning: symbol 'tmp' shadows an earlier one
 mm/vmalloc.c:293:24: originally declared here
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make anon_vma_chain_free() static.  It is called only in rmap.c and the
corresponding alloc function is already static.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The page_check_address() conditionally grabs *@ptlp in case of returning
non-NULL.  Rename and wrap it using __cond_lock() removes following
warnings from sparse:

 mm/rmap.c:472:9: warning: context imbalance in 'page_mapped_in_vma' - unexpected unlock
 mm/rmap.c:524:9: warning: context imbalance in 'page_referenced_one' - unexpected unlock
 mm/rmap.c:706:9: warning: context imbalance in 'page_mkclean_one' - unexpected unlock
 mm/rmap.c:1066:9: warning: context imbalance in 'try_to_unmap_one' - unexpected unlock
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The page_lock_anon_vma() conditionally grabs RCU and anon_vma lock but
page_unlock_anon_vma() releases them unconditionally.  This leads sparse
to complain about context imbalance.  Annotate them.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The follow_pte() conditionally grabs *@ptlp in case of returning 0.
Rename and wrap it using __cond_lock() removes following warnings:

 mm/memory.c:2337:9: warning: context imbalance in 'do_wp_page' - unexpected unlock
 mm/memory.c:3142:19: warning: context imbalance in 'handle_mm_fault' - different lock contexts for basic block
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The do_wp_page() releases @ptl but was missing proper annotation.  Add it.
 This removes following warnings from sparse:

 mm/memory.c:2337:9: warning: context imbalance in 'do_wp_page' - unexpected unlock
 mm/memory.c:3142:19: warning: context imbalance in 'handle_mm_fault' - different lock contexts for basic block
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The get_locked_pte() conditionally grabs 'ptl' in case of returning
non-NULL.  This leads sparse to complain about context imbalance.  Rename
and wrap it using __cond_lock() to make sparse happy.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This removes following warning from sparse:

 mm/page_alloc.c:1934:9: warning: restricted gfp_t degrades to integer
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

'end' shadows earlier one and is not necessary at all.  Remove it and use
'pos' instead.  This removes following sparse warnings:

 mm/filemap.c:2180:24: warning: symbol 'end' shadows an earlier one
 mm/filemap.c:2132:25: originally declared here
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

access_error() already takes error_code as an argument, so there is
no need for an additional write flag.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This change reduces mmap_sem hold times that are caused by waiting for
disk transfers when accessing file mapped VMAs.

It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call
site wants mmap_sem to be released if blocking on a pending disk transfer.
In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and
do_page_fault() will then re-acquire mmap_sem and retry the page fault.

It is expected that the retry will hit the same page which will now be
cached, and thus it will complete with a low mmap_sem hold time.

Tests:

- microbenchmark: thread A mmaps a large file and does random read accesses
  to the mmaped area - achieves about 55 iterations/s. Thread B does
  mmap/munmap in a loop at a separate location - achieves 55 iterations/s
  before, 15000 iterations/s after.

- We are seeing related effects in some applications in house, which show
  significant performance regressions when running without this change.

[akpm@linux-foundation.org: fix warning & crash]
Signed-off-by: NMichel Lespinasse <walken@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce a single location where filemap_fault() locks the desired page.
There used to be two such places, depending if the initial find_get_page()
was successful or not.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reorder structure anon_vma to remove alignment padding on 64 builds when
(CONFIG_KSM || CONFIG_MIGRATION).
This will shrink the size of the anon_vma structure from 40 to 32 bytes
& allow more objects per slab in its kmem_cache.

Under slub the objects in the anon_vma kmem_cache will then be 40 bytes
with 102 objects per slab.  (On v2.6.36 without this patch,the size is 48
bytes and 85 objects/slab.)
Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Buggy drivers (e.g.  fsl_udc) could call dma_pool_alloc from atomic
context with GFP_KERNEL.  In most instances, the first pool_alloc_page
call would succeed and the sleeping functions would never be called.  This
allowed the buggy drivers to slip through the cracks.

Add a might_sleep_if() checking for __GFP_WAIT in flags.
Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Document outlining some of the highmem issues, started by me, edited by
David.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that the KM_type stuff is history, clean up the compiler warning.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since we no longer need to provide KM_type, the whole pte_*map_nested()
API is now redundant, remove it.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Keep the current interface but ignore the KM_type and use a stack based
approach.

The advantage is that we get rid of crappy code like:

	#define __KM_PTE			\
		(in_nmi() ? KM_NMI_PTE : 	\
		 in_irq() ? KM_IRQ_PTE :	\
		 KM_PTE0)

and in general can stop worrying about what context we're in and what kmap
slots might be appropriate for that.

The downside is that FRV kmap_atomic() gets more expensive.

For now we use a CPP trick suggested by Andrew:

  #define kmap_atomic(page, args...) __kmap_atomic(page)

to avoid having to touch all kmap_atomic() users in a single patch.

[ not compiled on:
  - mn10300: the arch doesn't actually build with highmem to begin with ]

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c]
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ensure kmap_atomic() usage is strictly nested
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NRik van Riel <riel@redhat.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a page has PG_referenced, shrink_page_list() discards it only if it
is not dirty.  This rule works fine if the backing filesystem is a regular
one.  PG_dirty is a good signal that the page was used recently because
the flusher threads clean pages periodically.  In addition, page writeback
is costlier than simple page discard.

However, when a page is on tmpfs this heuristic doesn't work because
flusher threads don't write back tmpfs pages.  Consequently tmpfs pages
always rotate around the lru twice at least and adds unnecessary lru
churn.  Simple tmpfs streaming io shouldn't cause large anonymous page
swap-out.

Remove this unncessary reclaim bonus of tmpfs pages.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The dirty_ratio was silently limited in global_dirty_limits() to >= 5%.
This is not a user expected behavior.  And it's inconsistent with
calc_period_shift(), which uses the plain vm_dirty_ratio value.

Let's remove the internal bound.

At the same time, fix balance_dirty_pages() to work with the
dirty_thresh=0 case.  This allows applications to proceed when
dirty+writeback pages are all cleaned.

And ">" fits with the name "exceeded" better than ">=" does.  Neil thinks
it is an aesthetic improvement as well as a functional one :)
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Proposed-by: NCon Kolivas <kernel@kolivas.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

writeback: do not sleep on the congestion queue if there are no congested BDIs or if significant congestion is not being encountered in the current zone

If congestion_wait() is called with no BDI congested, the caller will
sleep for the full timeout and this may be an unnecessary sleep.  This
patch adds a wait_iff_congested() that checks congestion and only sleeps
if a BDI is congested else, it calls cond_resched() to ensure the caller
is not hogging the CPU longer than its quota but otherwise will not sleep.

This is aimed at reducing some of the major desktop stalls reported during
IO.  For example, while kswapd is operating, it calls congestion_wait()
but it could just have been reclaiming clean page cache pages with no
congestion.  Without this patch, it would sleep for a full timeout but
after this patch, it'll just call schedule() if it has been on the CPU too
long.  Similar logic applies to direct reclaimers that are not making
enough progress.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

isolate_lru_pages() does not just isolate LRU tail pages, but also
isolates neighbour pages of the eviction page.  The neighbour search does
not stop even if neighbours cannot be isolated which is excessive as the
lumpy reclaim will no longer result in a successful higher order
allocation.  This patch stops the PFN neighbour pages if an isolation
fails and moves on to the next block.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Reviewed-by: NWu Fengguang <fengguang.wu@intel.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After synchrounous lumpy reclaim, the page_list is guaranteed to not have
active pages as page activation in shrink_page_list() disables lumpy
reclaim.  Remove the dead code.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

shrink_page_list() can decide to give up reclaiming a page under a
number of conditions such as

  1. trylock_page() failure
  2. page is unevictable
  3. zone reclaim and page is mapped
  4. PageWriteback() is true
  5. page is swapbacked and swap is full
  6. add_to_swap() failure
  7. page is dirty and gfpmask don't have GFP_IO, GFP_FS
  8. page is pinned
  9. IO queue is congested
 10. pageout() start IO, but not finished

With lumpy reclaim, failures result in entering synchronous lumpy reclaim
but this can be unnecessary.  In cases (2), (3), (5), (6), (7) and (8),
there is no point retrying.  This patch causes lumpy reclaim to abort when
it is known it will fail.

Case (9) is more interesting. current behavior is,
  1. start shrink_page_list(async)
  2. found queue_congested()
  3. skip pageout write
  4. still start shrink_page_list(sync)
  5. wait on a lot of pages
  6. again, found queue_congested()
  7. give up pageout write again

So, it's useless time wasting.  However, just skipping page reclaim is
also notgood as x86 allocating a huge page needs 512 pages for example.
It can have more dirty pages than queue congestion threshold (~=128).

After this patch, pageout() behaves as follows;

 - If order > PAGE_ALLOC_COSTLY_ORDER
	Ignore queue congestion always.
 - If order <= PAGE_ALLOC_COSTLY_ORDER
	skip write page and disable lumpy reclaim.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

congestion_wait() means "wait until queue congestion is cleared".
However, synchronous lumpy reclaim does not need this congestion_wait() as
shrink_page_list(PAGEOUT_IO_SYNC) uses wait_on_page_writeback() and it
provides the necessary waiting.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NWu Fengguang <fengguang.wu@intel.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is strong evidence to indicate a lot of time is being spent in
congestion_wait(), some of it unnecessarily.  This patch adds a tracepoint
for congestion_wait to record when congestion_wait() was called, how long
the timeout was for and how long it actually slept.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There have been numerous reports of stalls that pointed at the problem
being somewhere in the VM.  There are multiple roots to the problems which
means dealing with any of the root problems in isolation is tricky to
justify on their own and they would still need integration testing.  This
patch series puts together two different patch sets which in combination
should tackle some of the root causes of latency problems being reported.

Patch 1 adds a tracepoint for shrink_inactive_list.  For this series, the
most important results is being able to calculate the scanning/reclaim
ratio as a measure of the amount of work being done by page reclaim.

Patch 2 accounts for time spent in congestion_wait.

Patches 3-6 were originally developed by Kosaki Motohiro but reworked for
this series.  It has been noted that lumpy reclaim is far too aggressive
and trashes the system somewhat.  As SLUB uses high-order allocations, a
large cost incurred by lumpy reclaim will be noticeable.  It was also
reported during transparent hugepage support testing that lumpy reclaim
was trashing the system and these patches should mitigate that problem
without disabling lumpy reclaim.

Patch 7 adds wait_iff_congested() and replaces some callers of
congestion_wait().  wait_iff_congested() only sleeps if there is a BDI
that is currently congested.  Patch 8 notes that any BDI being congested
is not necessarily a problem because there could be multiple BDIs of
varying speeds and numberous zones.  It attempts to track when a zone
being reclaimed contains many pages backed by a congested BDI and if so,
reclaimers wait on the congestion queue.

I ran a number of tests with monitoring on X86, X86-64 and PPC64. Each
machine had 3G of RAM and the CPUs were

X86:    Intel P4 2-core
X86-64: AMD Phenom 4-core
PPC64:  PPC970MP

Each used a single disk and the onboard IO controller.  Dirty ratio was
left at 20.  I'm just going to report for X86-64 and PPC64 in a vague
attempt to keep this report short.  Four kernels were tested each based on
v2.6.36-rc4

traceonly-v2r2:     Patches 1 and 2 to instrument vmscan reclaims and congestion_wait
lowlumpy-v2r3:      Patches 1-6 to test if lumpy reclaim is better
waitcongest-v2r3:   Patches 1-7 to only wait on congestion
waitwriteback-v2r4: Patches 1-8 to detect when a zone is congested

nocongest-v1r5: Patches 1-3 for testing wait_iff_congestion
nodirect-v1r5:  Patches 1-10 to disable filesystem writeback for better IO

The tests run were as follows

kernbench
	compile-based benchmark. Smoke test performance

sysbench
	OLTP read-only benchmark. Will be re-run in the future as read-write

micro-mapped-file-stream
	This is a micro-benchmark from Johannes Weiner that accesses a
	large sparse-file through mmap(). It was configured to run in only
	single-CPU mode but can be indicative of how well page reclaim
	identifies suitable pages.

stress-highalloc
	Tries to allocate huge pages under heavy load.

kernbench, iozone and sysbench did not report any performance regression
on any machine.  sysbench did pressure the system lightly and there was
reclaim activity but there were no difference of major interest between
the kernels.

X86-64 micro-mapped-file-stream

                                      traceonly-v2r2           lowlumpy-v2r3        waitcongest-v2r3     waitwriteback-v2r4
pgalloc_dma                       1639.00 (   0.00%)       667.00 (-145.73%)      1167.00 ( -40.45%)       578.00 (-183.56%)
pgalloc_dma32                  2842410.00 (   0.00%)   2842626.00 (   0.01%)   2843043.00 (   0.02%)   2843014.00 (   0.02%)
pgalloc_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgsteal_dma                        729.00 (   0.00%)        85.00 (-757.65%)       609.00 ( -19.70%)       125.00 (-483.20%)
pgsteal_dma32                  2338721.00 (   0.00%)   2447354.00 (   4.44%)   2429536.00 (   3.74%)   2436772.00 (   4.02%)
pgsteal_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgscan_kswapd_dma                 1469.00 (   0.00%)       532.00 (-176.13%)      1078.00 ( -36.27%)       220.00 (-567.73%)
pgscan_kswapd_dma32            4597713.00 (   0.00%)   4503597.00 (  -2.09%)   4295673.00 (  -7.03%)   3891686.00 ( -18.14%)
pgscan_kswapd_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgscan_direct_dma                   71.00 (   0.00%)       134.00 (  47.01%)       243.00 (  70.78%)       352.00 (  79.83%)
pgscan_direct_dma32             305820.00 (   0.00%)    280204.00 (  -9.14%)    600518.00 (  49.07%)    957485.00 (  68.06%)
pgscan_direct_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pageoutrun                       16296.00 (   0.00%)     21254.00 (  23.33%)     18447.00 (  11.66%)     20067.00 (  18.79%)
allocstall                         443.00 (   0.00%)       273.00 ( -62.27%)       513.00 (  13.65%)      1568.00 (  71.75%)

These are based on the raw figures taken from /proc/vmstat.  It's a rough
measure of reclaim activity.  Note that allocstall counts are higher
because we are entering direct reclaim more often as a result of not
sleeping in congestion.  In itself, it's not necessarily a bad thing.
It's easier to get a view of what happened from the vmscan tracepoint
report.

FTrace Reclaim Statistics: vmscan

                                traceonly-v2r2   lowlumpy-v2r3 waitcongest-v2r3 waitwriteback-v2r4
Direct reclaims                                443        273        513       1568
Direct reclaim pages scanned                305968     280402     600825     957933
Direct reclaim pages reclaimed               43503      19005      30327     117191
Direct reclaim write file async I/O              0          0          0          0
Direct reclaim write anon async I/O              0          3          4         12
Direct reclaim write file sync I/O               0          0          0          0
Direct reclaim write anon sync I/O               0          0          0          0
Wake kswapd requests                        187649     132338     191695     267701
Kswapd wakeups                                   3          1          4          1
Kswapd pages scanned                       4599269    4454162    4296815    3891906
Kswapd pages reclaimed                     2295947    2428434    2399818    2319706
Kswapd reclaim write file async I/O              1          0          1          1
Kswapd reclaim write anon async I/O             59        187         41        222
Kswapd reclaim write file sync I/O               0          0          0          0
Kswapd reclaim write anon sync I/O               0          0          0          0
Time stalled direct reclaim (seconds)         4.34       2.52       6.63       2.96
Time kswapd awake (seconds)                  11.15      10.25      11.01      10.19

Total pages scanned                        4905237   4734564   4897640   4849839
Total pages reclaimed                      2339450   2447439   2430145   2436897
%age total pages scanned/reclaimed          47.69%    51.69%    49.62%    50.25%
%age total pages scanned/written             0.00%     0.00%     0.00%     0.00%
%age  file pages scanned/written             0.00%     0.00%     0.00%     0.00%
Percentage Time Spent Direct Reclaim        29.23%    19.02%    38.48%    20.25%
Percentage Time kswapd Awake                78.58%    78.85%    76.83%    79.86%

What is interesting here for nocongest in particular is that while direct
reclaim scans more pages, the overall number of pages scanned remains the
same and the ratio of pages scanned to pages reclaimed is more or less the
same.  In other words, while we are sleeping less, reclaim is not doing
more work and as direct reclaim and kswapd is awake for less time, it
would appear to be doing less work.

FTrace Reclaim Statistics: congestion_wait
Direct number congest     waited                87        196         64          0
Direct time   congest     waited            4604ms     4732ms     5420ms        0ms
Direct full   congest     waited                72        145         53          0
Direct number conditional waited                 0          0        324       1315
Direct time   conditional waited               0ms        0ms        0ms        0ms
Direct full   conditional waited                 0          0          0          0
KSwapd number congest     waited                20         10         15          7
KSwapd time   congest     waited            1264ms      536ms      884ms      284ms
KSwapd full   congest     waited                10          4          6          2
KSwapd number conditional waited                 0          0          0          0
KSwapd time   conditional waited               0ms        0ms        0ms        0ms
KSwapd full   conditional waited                 0          0          0          0

The vanilla kernel spent 8 seconds asleep in direct reclaim and no time at
all asleep with the patches.

MMTests Statistics: duration
User/Sys Time Running Test (seconds)         10.51     10.73      10.6     11.66
Total Elapsed Time (seconds)                 14.19     13.00     14.33     12.76

Overall, the tests completed faster. It is interesting to note that backing off further
when a zone is congested and not just a BDI was more efficient overall.

PPC64 micro-mapped-file-stream
pgalloc_dma                    3024660.00 (   0.00%)   3027185.00 (   0.08%)   3025845.00 (   0.04%)   3026281.00 (   0.05%)
pgalloc_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgsteal_dma                    2508073.00 (   0.00%)   2565351.00 (   2.23%)   2463577.00 (  -1.81%)   2532263.00 (   0.96%)
pgsteal_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgscan_kswapd_dma              4601307.00 (   0.00%)   4128076.00 ( -11.46%)   3912317.00 ( -17.61%)   3377165.00 ( -36.25%)
pgscan_kswapd_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgscan_direct_dma               629825.00 (   0.00%)    971622.00 (  35.18%)   1063938.00 (  40.80%)   1711935.00 (  63.21%)
pgscan_direct_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pageoutrun                       27776.00 (   0.00%)     20458.00 ( -35.77%)     18763.00 ( -48.04%)     18157.00 ( -52.98%)
allocstall                         977.00 (   0.00%)      2751.00 (  64.49%)      2098.00 (  53.43%)      5136.00 (  80.98%)

Similar trends to x86-64. allocstalls are up but it's not necessarily bad.

FTrace Reclaim Statistics: vmscan
Direct reclaims                                977       2709       2098       5136
Direct reclaim pages scanned                629825     963814    1063938    1711935
Direct reclaim pages reclaimed               75550     242538     150904     387647
Direct reclaim write file async I/O              0          0          0          2
Direct reclaim write anon async I/O              0         10          0          4
Direct reclaim write file sync I/O               0          0          0          0
Direct reclaim write anon sync I/O               0          0          0          0
Wake kswapd requests                        392119    1201712     571935     571921
Kswapd wakeups                                   3          2          3          3
Kswapd pages scanned                       4601307    4128076    3912317    3377165
Kswapd pages reclaimed                     2432523    2318797    2312673    2144616
Kswapd reclaim write file async I/O             20          1          1          1
Kswapd reclaim write anon async I/O             57        132         11        121
Kswapd reclaim write file sync I/O               0          0          0          0
Kswapd reclaim write anon sync I/O               0          0          0          0
Time stalled direct reclaim (seconds)         6.19       7.30      13.04      10.88
Time kswapd awake (seconds)                  21.73      26.51      25.55      23.90

Total pages scanned                        5231132   5091890   4976255   5089100
Total pages reclaimed                      2508073   2561335   2463577   2532263
%age total pages scanned/reclaimed          47.95%    50.30%    49.51%    49.76%
%age total pages scanned/written             0.00%     0.00%     0.00%     0.00%
%age  file pages scanned/written             0.00%     0.00%     0.00%     0.00%
Percentage Time Spent Direct Reclaim        18.89%    20.65%    32.65%    27.65%
Percentage Time kswapd Awake                72.39%    80.68%    78.21%    77.40%

Again, a similar trend that the congestion_wait changes mean that direct
reclaim scans more pages but the overall number of pages scanned while
slightly reduced, are very similar.  The ratio of scanning/reclaimed
remains roughly similar.  The downside is that kswapd and direct reclaim
was awake longer and for a larger percentage of the overall workload.
It's possible there were big differences in the amount of time spent
reclaiming slab pages between the different kernels which is plausible
considering that the micro tests runs after fsmark and sysbench.

Trace Reclaim Statistics: congestion_wait
Direct number congest     waited               845       1312        104          0
Direct time   congest     waited           19416ms    26560ms     7544ms        0ms
Direct full   congest     waited               745       1105         72          0
Direct number conditional waited                 0          0       1322       2935
Direct time   conditional waited               0ms        0ms       12ms      312ms
Direct full   conditional waited                 0          0          0          3
KSwapd number congest     waited                39        102         75         63
KSwapd time   congest     waited            2484ms     6760ms     5756ms     3716ms
KSwapd full   congest     waited                20         48         46         25
KSwapd number conditional waited                 0          0          0          0
KSwapd time   conditional waited               0ms        0ms        0ms        0ms
KSwapd full   conditional waited                 0          0          0          0

The vanilla kernel spent 20 seconds asleep in direct reclaim and only
312ms asleep with the patches.  The time kswapd spent congest waited was
also reduced by a large factor.

MMTests Statistics: duration
ser/Sys Time Running Test (seconds)         26.58     28.05      26.9     28.47
Total Elapsed Time (seconds)                 30.02     32.86     32.67     30.88

With all patches applies, the completion times are very similar.

X86-64 STRESS-HIGHALLOC
                traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
Pass 1          82.00 ( 0.00%)    84.00 ( 2.00%)    85.00 ( 3.00%)    85.00 ( 3.00%)
Pass 2          90.00 ( 0.00%)    87.00 (-3.00%)    88.00 (-2.00%)    89.00 (-1.00%)
At Rest         92.00 ( 0.00%)    90.00 (-2.00%)    90.00 (-2.00%)    91.00 (-1.00%)

Success figures across the board are broadly similar.

                traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
Direct reclaims                               1045        944        886        887
Direct reclaim pages scanned                135091     119604     109382     101019
Direct reclaim pages reclaimed               88599      47535      47863      46671
Direct reclaim write file async I/O            494        283        465        280
Direct reclaim write anon async I/O          29357      13710      16656      13462
Direct reclaim write file sync I/O             154          2          2          3
Direct reclaim write anon sync I/O           14594        571        509        561
Wake kswapd requests                          7491        933        872        892
Kswapd wakeups                                 814        778        731        780
Kswapd pages scanned                       7290822   15341158   11916436   13703442
Kswapd pages reclaimed                     3587336    3142496    3094392    3187151
Kswapd reclaim write file async I/O          91975      32317      28022      29628
Kswapd reclaim write anon async I/O        1992022     789307     829745     849769
Kswapd reclaim write file sync I/O               0          0          0          0
Kswapd reclaim write anon sync I/O               0          0          0          0
Time stalled direct reclaim (seconds)      4588.93    2467.16    2495.41    2547.07
Time kswapd awake (seconds)                2497.66    1020.16    1098.06    1176.82

Total pages scanned                        7425913  15460762  12025818  13804461
Total pages reclaimed                      3675935   3190031   3142255   3233822
%age total pages scanned/reclaimed          49.50%    20.63%    26.13%    23.43%
%age total pages scanned/written            28.66%     5.41%     7.28%     6.47%
%age  file pages scanned/written             1.25%     0.21%     0.24%     0.22%
Percentage Time Spent Direct Reclaim        57.33%    42.15%    42.41%    42.99%
Percentage Time kswapd Awake                43.56%    27.87%    29.76%    31.25%

Scanned/reclaimed ratios again look good with big improvements in
efficiency.  The Scanned/written ratios also look much improved.  With a
better scanned/written ration, there is an expectation that IO would be
more efficient and indeed, the time spent in direct reclaim is much
reduced by the full series and kswapd spends a little less time awake.

Overall, indications here are that allocations were happening much faster
and this can be seen with a graph of the latency figures as the
allocations were taking place
http://www.csn.ul.ie/~mel/postings/vmscanreduce-20101509/highalloc-interlatency-hydra-mean.ps

FTrace Reclaim Statistics: congestion_wait
Direct number congest     waited              1333        204        169          4
Direct time   congest     waited           78896ms     8288ms     7260ms      200ms
Direct full   congest     waited               756         92         69          2
Direct number conditional waited                 0          0         26        186
Direct time   conditional waited               0ms        0ms        0ms     2504ms
Direct full   conditional waited                 0          0          0         25
KSwapd number congest     waited                 4        395        227        282
KSwapd time   congest     waited             384ms    25136ms    10508ms    18380ms
KSwapd full   congest     waited                 3        232         98        176
KSwapd number conditional waited                 0          0          0          0
KSwapd time   conditional waited               0ms        0ms        0ms        0ms
KSwapd full   conditional waited                 0          0          0          0
KSwapd full   conditional waited               318          0        312          9

Overall, the time spent speeping is reduced.  kswapd is still hitting
congestion_wait() but that is because there are callers remaining where it
wasn't clear in advance if they should be changed to wait_iff_congested()
or not.  Overall the sleep imes are reduced though - from 79ish seconds to
about 19.

MMTests Statistics: duration
User/Sys Time Running Test (seconds)       3415.43   3386.65   3388.39    3377.5
Total Elapsed Time (seconds)               5733.48   3660.33   3689.41   3765.39

With the full series, the time to complete the tests are reduced by 30%

PPC64 STRESS-HIGHALLOC
                traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
Pass 1          17.00 ( 0.00%)    34.00 (17.00%)    38.00 (21.00%)    43.00 (26.00%)
Pass 2          25.00 ( 0.00%)    37.00 (12.00%)    42.00 (17.00%)    46.00 (21.00%)
At Rest         49.00 ( 0.00%)    43.00 (-6.00%)    45.00 (-4.00%)    51.00 ( 2.00%)

Success rates there are *way* up particularly considering that the 16MB
huge pages on PPC64 mean that it's always much harder to allocate them.

FTrace Reclaim Statistics: vmscan
              stress-highalloc  stress-highalloc  stress-highalloc  stress-highalloc
                traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
Direct reclaims                                499        505        564        509
Direct reclaim pages scanned                223478      41898      51818      45605
Direct reclaim pages reclaimed              137730      21148      27161      23455
Direct reclaim write file async I/O            399        136        162        136
Direct reclaim write anon async I/O          46977       2865       4686       3998
Direct reclaim write file sync I/O              29          0          1          3
Direct reclaim write anon sync I/O           31023        159        237        239
Wake kswapd requests                           420        351        360        326
Kswapd wakeups                                 185        294        249        277
Kswapd pages scanned                      15703488   16392500   17821724   17598737
Kswapd pages reclaimed                     5808466    2908858    3139386    3145435
Kswapd reclaim write file async I/O         159938      18400      18717      13473
Kswapd reclaim write anon async I/O        3467554     228957     322799     234278
Kswapd reclaim write file sync I/O               0          0          0          0
Kswapd reclaim write anon sync I/O               0          0          0          0
Time stalled direct reclaim (seconds)      9665.35    1707.81    2374.32    1871.23
Time kswapd awake (seconds)                9401.21    1367.86    1951.75    1328.88

Total pages scanned                       15926966  16434398  17873542  17644342
Total pages reclaimed                      5946196   2930006   3166547   3168890
%age total pages scanned/reclaimed          37.33%    17.83%    17.72%    17.96%
%age total pages scanned/written            23.27%     1.52%     1.94%     1.43%
%age  file pages scanned/written             1.01%     0.11%     0.11%     0.08%
Percentage Time Spent Direct Reclaim        44.55%    35.10%    41.42%    36.91%
Percentage Time kswapd Awake                86.71%    43.58%    52.67%    41.14%

While the scanning rates are slightly up, the scanned/reclaimed and
scanned/written figures are much improved.  The time spent in direct
reclaim and with kswapd are massively reduced, mostly by the lowlumpy
patches.

FTrace Reclaim Statistics: congestion_wait
Direct number congest     waited               725        303        126          3
Direct time   congest     waited           45524ms     9180ms     5936ms      300ms
Direct full   congest     waited               487        190         52          3
Direct number conditional waited                 0          0        200        301
Direct time   conditional waited               0ms        0ms        0ms     1904ms
Direct full   conditional waited                 0          0          0         19
KSwapd number congest     waited                 0          2         23          4
KSwapd time   congest     waited               0ms      200ms      420ms      404ms
KSwapd full   congest     waited                 0          2          2          4
KSwapd number conditional waited                 0          0          0          0
KSwapd time   conditional waited               0ms        0ms        0ms        0ms
KSwapd full   conditional waited                 0          0          0          0

Not as dramatic a story here but the time spent asleep is reduced and we
can still see what wait_iff_congested is going to sleep when necessary.

MMTests Statistics: duration
User/Sys Time Running Test (seconds)      12028.09   3157.17   3357.79   3199.16
Total Elapsed Time (seconds)              10842.07   3138.72   3705.54   3229.85

The time to complete this test goes way down.  With the full series, we
are allocating over twice the number of huge pages in 30% of the time and
there is a corresponding impact on the allocation latency graph available
at.

http://www.csn.ul.ie/~mel/postings/vmscanreduce-20101509/highalloc-interlatency-powyah-mean.ps

This patch:

Add a trace event for shrink_inactive_list() and updates the sample
postprocessing script appropriately.  It can be used to determine how many
pages were reclaimed and for non-lumpy reclaim where exactly the pages
were reclaimed from.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

`priority' cannot be negative here.  And the comment is obsolete.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

NODE_NOT_IN_PAGE_FLAGS is defined in mm.h when the node information is not
stored in the page flags bitmap.

Unfortunately, there's a typo in one of the checks for it.  This patch
fixes it (s/NODE_NOT_IN_PAGEFLAGS/NODE_NOT_IN_PAGE_FLAGS/).  Since this
has been around for ages, I doubt it's been causing any serious problems.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel already exposes the user desired thresholds in /proc/sys/vm
with dirty_background_ratio and background_ratio.  But the kernel may
alter the number requested without giving the user any indication that is
the case.

Knowing the actual ratios the kernel is honoring can help app developers
understand how their buffered IO will be sent to the disk.

        $ grep threshold /proc/vmstat
        nr_dirty_threshold 409111
        nr_dirty_background_threshold 818223
Signed-off-by: NMichael Rubin <mrubin@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For NUMA node systems it is important to have visibility in memory
characteristics.  Two of the /proc/vmstat values "nr_written" and
"nr_dirtied" are added here.

	# cat /sys/devices/system/node/node20/vmstat
	nr_written 0
	nr_dirtied 0
Signed-off-by: NMichael Rubin <mrubin@google.com>
Reviewed-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>