- 26 8月, 2009 2 次提交
-
-
由 Josh Triplett 提交于
function_graph traces look like nested function calls, complete with braces denoting the start and end of functions. function-graph-fold.vim teaches vim how to fold these functions, to make it more convenient to browse them. To use, :source function-graph-fold.vim while viewing a function_graph trace, or use "view -S function-graph-fold.vim some-trace" to load it from the command-line together with a trace. You can then use the usual vim fold commands, such as "za", to open and close nested functions. While closed, a fold will show the total time taken for a call, as would normally appear on the line with the closing brace. Folded functions will not include finish_task_switch(), so folding should remain relatively sane even through a context switch. Note that this will almost certainly only work well with a single-CPU trace (e.g. trace-cmd report --cpu 1). It also takes some time to run (a few seconds for a large trace on my laptop). Nevertheless, I found it very handy to get an overview of a trace and then drill down on problematic calls. Signed-off-by: NJosh Triplett <josh@joshtriplett.org> LKML-Reference: <20090806145701.GB7661@feather> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
While debugging the scheduler push / pull algorithm, I found it very annoying that the sched wake up events did not show the CPU that the task was waking on. In order to analyze the scheduler, I needed that information. This patch adds recording of the CPU that a task is waking up on. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 25 8月, 2009 1 次提交
-
-
由 Anirban Sinha 提交于
Signed-off-by: NAnirban Sinha <asinha@zeugmasystems.com> Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: "Oleg Nesterov" <oleg@tv-sign.ru> LKML-Reference: <DDFD17CC94A9BD49A82147DDF7D545C501EA9047@exchange.ZeugmaSystems.local> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 8月, 2009 1 次提交
-
-
由 Li Zefan 提交于
Before: # echo 1 > events/syscalls/sys_enter_sync/enable # cat events/syscalls/sys_enter_sync/format ... field:int nr; offset:12; size:4; print fmt: "# sync # cat trace ... sync-8950 [000] 2366.087670: sys_sync( After: # echo 1 > events/syscalls/sys_enter_sync/enable # cat events/syscalls/sys_enter_sync/format ... field:int nr; offset:12; size:4; print fmt: "" # sync # cat trace sync-2134 [001] 136.780735: sys_sync() Reported-by: NMasami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <4A8D05AF.20103@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 19 8月, 2009 6 次提交
-
-
由 Li Zefan 提交于
Add filtering support for syscall events: # echo 'mode == 0666' > events/syscalls/sys_enter_open # echo 'ret == 0' > events/syscalls/sys_exit_open # echo 1 > events/syscalls/sys_enter_open # echo 1 > events/syscalls/sys_exit_open # cat trace ... modprobe-3084 [001] 117.463140: sys_open(filename: 917d3e8, flags: 0, mode: 1b6) modprobe-3084 [001] 117.463176: sys_open -> 0x0 less-3086 [001] 117.510455: sys_open(filename: 9c6bdb8, flags: 8000, mode: 1b6) sendmail-2574 [001] 122.145840: sys_open(filename: b807a365, flags: 0, mode: 1b6) ... Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A8BAFCB.1040006@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Extract duplicate code. Also prepare for the later patch. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A8BAFB8.1010304@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
This parameter is needed by syscall events to add define_fields() handler. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A8BAF90.6060801@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Add "format" file for syscall exit events: # cat events/syscalls/sys_exit_open/format name: sys_exit_open ID: 344 format: field:unsigned short common_type; offset:0; size:2; field:unsigned char common_flags; offset:2; size:1; field:unsigned char common_preempt_count; offset:3; size:1; field:int common_pid; offset:4; size:4; field:int common_tgid; offset:8; size:4; field:int nr; offset:12; size:4; field:unsigned long ret; offset:16; size:4; Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A8BAF61.3060307@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
The "format" file of a trace event is originally for parsers to parse ftrace binary output. But the "format" file of a syscall event can only be used by perfcounter, because it describes the format of struct syscall_enter_record not struct syscall_trace_enter. To fix this, we remove struct syscall_enter_record, and then struct syscall_trace_enter will be used by both perf profile and ftrace. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A8BAF39.1030404@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Commit fb34a08c ("tracing: Add trace events for each syscall entry/exit") changed the lowlevel API to ftrace syscall tracing but did not update s390 which started making use of it recently. This broke the s390 build, as reported by Paul Mundt. Update the callbacks with the syscall number and the syscall return code values. This allows per syscall tracepoints, syscall argument enumeration /debug/tracing/events/syscalls/ and perfcounters support and integration on s390 too. Reported-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <tip-fb34a08c@git.kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 8月, 2009 5 次提交
-
-
由 Li Zefan 提交于
Use seq_release_private(). Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A891AAB.8090701@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Extract duplicate code in t_start() and t_next(). Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A891A91.4030602@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
One entry is missing in the output of a stat file. The cause is, when stat_seq_start() is called the 2nd time, we should start from the (pos-1)th elem in the rbtree but not pos, because pos == 0 is the header. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A891A65.70009@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
When syscall tracing was implemented as a tracer, "syscall_arg_type" trace option could be set to enable the display of syscall parameter types. Now this option is gone since it's no longer a tracer, but the code is still there but dead. So we remove dead code and re-enable the printing of paramete types via the verbose option: # echo verbose > trace_options # echo syscalls > set_event # cat trace ... bash-3331 [000] 95.348937: sys_fcntl64 -> 0x1 bash-3331 [000] 95.348942: sys_close(unsigned int fd: a) ... Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <4A891AF6.5050102@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Add trace points to trace module_load, module_free, module_get, module_put and module_request, and use trace_event facility to get the trace output. Here's the sample output: TASK-PID CPU# TIMESTAMP FUNCTION | | | | | <...>-42 [000] 1.758380: module_request: fb0 wait=1 call_site=fb_open ... <...>-60 [000] 3.269403: module_load: scsi_wait_scan <...>-60 [000] 3.269432: module_put: scsi_wait_scan call_site=sys_init_module refcnt=0 <...>-61 [001] 3.273168: module_free: scsi_wait_scan ... <...>-1021 [000] 13.836081: module_load: sunrpc <...>-1021 [000] 13.840589: module_put: sunrpc call_site=sys_init_module refcnt=-1 <...>-1027 [000] 13.848098: module_get: sunrpc call_site=try_module_get refcnt=0 <...>-1027 [000] 13.848308: module_get: sunrpc call_site=get_filesystem refcnt=1 <...>-1027 [000] 13.848692: module_put: sunrpc call_site=put_filesystem refcnt=0 ... modprobe-2587 [001] 1088.437213: module_load: trace_events_sample F modprobe-2587 [001] 1088.437786: module_put: trace_events_sample call_site=sys_init_module refcnt=0 Note: - the taints flag can be 'F', 'C' and/or 'P' if mod->taints != 0 - the module refcnt is percpu, so it can be negative in a specific cpu Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <4A891B3C.5030608@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 8月, 2009 1 次提交
-
-
由 Ingo Molnar 提交于
The new syscall_regfunc()/unregfunc() functions rely on the existence of TIF_SYSCALL_FTRACE - but that TIF flag is only offered by HAVE_FTRACE_SYSCALLS. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 8月, 2009 16 次提交
-
-
由 Frederic Weisbecker 提交于
This bring the support for raw syscall events in perfcounters. The arguments or exit value are saved as a raw sample using the PERF_SAMPLE_RAW attribute in a perf counter. Example (for now you must explicitly set the PERF_SAMPLE_RAW flag in perf record): perf record -e syscalls:sys_enter_open -f -F 1 -a perf report -D 0x2cbb8 [0x50]: event: 9 . . ... raw event: size 80 bytes . 0000: 09 00 00 00 02 00 50 00 20 e9 39 ab 0a 7f 00 00 ......P. .9.... . 0010: bc 14 00 00 bc 14 00 00 01 00 00 00 00 00 00 00 ............... . 0020: 2c 00 00 00 15 01 01 00 bc 14 00 00 bc 14 00 00 ,.............. ^ ^ ^ ^ ^ ^ ^ .......................... Event Size struct trace_entry . 0030: 00 00 00 00 46 98 43 02 00 00 00 00 80 08 00 00 ....F.C........ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ptr to file name open flags . 0040: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ............... ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ . open mode padding 0x2cbb8 [0x50]: PERF_EVENT_SAMPLE (IP, 2): 5308: 0x7f0aab39e920 period: 1 Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
-
由 Frederic Weisbecker 提交于
Define the format of the syscall trace fields to parse the binary values from a raw trace using the syscall events "format" file. This is defined dynamically using the syscalls metadata. It prepares the export of syscall event raw records to perf counters. Example: $ cat /debug/tracing/events/syscalls/sys_enter_sched_getparam/format name: sys_enter_sched_getparam ID: 39 format: field:unsigned short common_type; offset:0; size:2; field:unsigned char common_flags; offset:2; size:1; field:unsigned char common_preempt_count; offset:3; size:1; field:int common_pid; offset:4; size:4; field:int common_tgid; offset:8; size:4; field:pid_t pid; offset:12; size:8; field:struct sched_param * param; offset:20; size:8; print fmt: "pid: 0x%08lx, param: 0x%08lx", ((unsigned long)(REC->pid)), ((unsigned long)(REC->param)) Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com>
-
由 Frederic Weisbecker 提交于
Add the struct ftrace_event_call as a parameter of its show_format() callback. This way we can use it from the syscall trace events to retrieve the syscall name from the ftrace event call parameter and describe its fields using the syscalls metadata. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com>
-
由 Jason Baron 提交于
A number of syscalls are not using 'DEFINE_SYSCALL'. I'm not sure why. Convert x86_64 uname and mmap to use DEFINE_SYSCALL. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
The new syscall tracepoints names can be too long for the 'perf list' output. Add a few more characters. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
The perf counter support is automated for usual trace events. But we have to define specific callbacks for this to handle syscalls trace events Make 'perf stat -e syscalls:sys_enter_blah' work with syscall style tracepoints. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
The current state of syscalls tracepoints generates only one event id for every syscall events. This patch associates an id with each syscall trace event, so that we can identify each syscall trace event using the 'perf' tool. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
Layer Frederic's syscall tracer on tracepoints. We create trace events via hooking into the SYSCALL_DEFINE macros. This allows us to individually toggle syscall entry and exit points on/off. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
add an optional void * pointer to 'ftrace_event_call' that is passed in for regfunc and unregfunc. This prepares for syscall tracepoints creation by passing the name of the syscall we want to trace and then retrieve its number through our arch syscall table. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
Allow the return value of raw_init() trace event callback to bail us out of creating a trace event file, in case we fail to register our event. Also, we plan to return -ENOSYS for syscall events that don't match any syscalls listed in our arch tracing syscall table, we don't want to warn in that case, we just want this event to be invisible in debugfs and ignored. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
update FTRACE_SYSCALL_MAX to the current number of syscalls FTRACE_SYSCALL_MAX is a temporary solution to get the number of syscalls supported by the arch until we find a more dynamic way to get this number. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
add two tracepoints in syscall exit and entry path, conditioned on TIF_SYSCALL_FTRACE. Supports the syscall trace event code. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
Introduce a new 'DECLARE_TRACE_WITH_CALLBACK()' macro, so that tracepoints can associate an external register/unregister function. This prepares for the syscalls tracer conversion to trace events. We will need to perform arch level operations once a syscall event is turned on/off, such as TIF flags setting, hence the need of such specific callbacks. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
Call arch_init_ftrace_syscalls at boot, so we can determine early the set of syscalls for the syscall trace events. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
Add a new function to support translating a syscall name to number at runtime. This allows the syscall event tracer to map syscall names to number. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Zhaolei 提交于
set_tracer_flags() have a local variable named trace_flags which has the same name than a global one in the same scope. This leads to confusion, using tracer_flags should be better by its meaning. Changelog: v1->v2: Simplified another patch in this patchset, no change in this patch. Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 11 8月, 2009 8 次提交
-
-
由 Ingo Molnar 提交于
Conflicts: kernel/trace/trace_events_filter.c We use the tracing/core version. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Linus Torvalds 提交于
Commit d945cb9c ("pty: Rework the pty layer to use the normal buffering logic") dropped the test for 'tty->stopped' in pty_write_room(), which then causes the n_tty line discipline thing to not throttle the data properly when the tty is stopped. So instead of pausing the write due to the tty being stopped, the ldisc layer would go ahead and push it down to the pty. The pty write() routine would then refuse to take the data (because it _did_ check 'stopped'), and the data wouldn't actually be written. This whole stopped test should eventually be moved into the tty ldisc layer rather than have low-level tty drivers care about these things, but right now the fix is to just re-instate the missing pty 'stopped' handling. Reported-and-tested-by: NArtur Skawina <art.08.09@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits) perf_counter: Zero dead bytes from ftrace raw samples size alignment perf_counter: Subtract the buffer size field from the event record size perf_counter: Require CAP_SYS_ADMIN for raw tracepoint data perf_counter: Correct PERF_SAMPLE_RAW output perf tools: callchain: Fix bad rounding of minimum rate perf_counter tools: Fix libbfd detection for systems with libz dependency perf: "Longum est iter per praecepta, breve et efficax per exempla" perf_counter: Fix a race on perf_counter_ctx perf_counter: Fix tracepoint sampling to be part of generic sampling perf_counter: Work around gcc warning by initializing tracepoint record unconditionally perf tools: callchain: Fix sum of percentages to be 100% by displaying amount of ignored chains in fractal mode perf tools: callchain: Fix 'perf report' display to be callchain by default perf tools: callchain: Fix spurious 'perf report' warnings: ignore empty callchains perf record: Fix the -A UI for empty or non-existent perf.data perf util: Fix do_read() to fail on EOF instead of busy-looping perf list: Fix the output to not include tracepoints without an id perf_counter/powerpc: Fix oops on cpus without perf_counter hardware support perf stat: Fix tool option consistency: rename -S/--scale to -c/--scale perf report: Add debug help for the finding of symbol bugs - show the symtab origin (DSO, build-id, kernel, etc) perf report: Fix per task mult-counter stat reporting ...
-
由 Linus Torvalds 提交于
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/irq: Fix move_irq_desc() for nodes without ram
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix serialization in pit_expect_msb()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI hotplug: SGI hotplug: do not use hotplug_slot_attr PCI hotplug: SGI hotplug: fix build failure
-
由 Linus Torvalds 提交于
Wei Chong Tan reported a fast-PIT-calibration corner-case: | pit_expect_msb() is vulnerable to SMI disturbance corner case | in some platforms which causes /proc/cpuinfo to show wrong | CPU MHz value when quick_pit_calibrate() jumps to success | section. I think that the real issue isn't even an SMI - but the fact that in the very last iteration of the loop, there's no serializing instruction _after_ the last 'rdtsc'. So even in the absense of SMI's, we do have a situation where the cycle counter was read without proper serialization. The last check should be done outside the outer loop, since _inside_ the outer loop, we'll be testing that the PIT has the right MSB value has the right value in the next iteration. So only the _last_ iteration is special, because that's the one that will not check the PIT MSB value any more, and because the final 'get_cycles()' isn't serialized. In other words: - I'd like to move the PIT MSB check to after the last iteration, rather than in every iteration - I think we should comment on the fact that it's also a serializing instruction and so 'fences in' the TSC read. Here's a suggested replacement. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Reported-by: N"Tan, Wei Chong" <wei.chong.tan@intel.com> Tested-by: N"Tan, Wei Chong" <wei.chong.tan@intel.com> LKML-Reference: <B28277FD4E0F9247A3D55704C440A140D5D683F3@pgsmsx504.gar.corp.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: mm_for_maps: take ->cred_guard_mutex to fix the race with exec mm_for_maps: shift down_read(mmap_sem) to the caller mm_for_maps: simplify, use ptrace_may_access()
-