- 09 3月, 2018 13 次提交
-
-
由 Kirill Tkhai 提交于
These pernet_operations create and destroy net::xfrm::nlsk socket of NETLINK_XFRM. There is only entry point, where it's dereferenced, it's xfrm_user_rcv_msg(). There is no in-kernel senders to this socket. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
The pernet_operations: ip6table_filter_net_ops ip6table_mangle_net_ops ip6table_nat_net_ops ip6table_raw_net_ops ip6table_security_net_ops have exit methods, which call ip6t_unregister_table(). ip6table_filter_net_ops has init method registering filter table. Since there must not be in-flight ipv6 packets at the time of pernet_operations execution and since pernet_operations don't send ipv6 packets each other, these pernet_operations are safe to be async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Allow setting firstfrag as matching option in tc flower classifier. # tc filter add dev eth0 protocol ip parent ffff: \ flower indev eth0 \ ip_flags firstfrag action mirred egress redirect dev eth1 Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Peng Li says: ==================== fix some bugs for hns3 driver This patchset fix some bugs for hns3 driver. [Patch 1/6 - Patch 3/6] fix bugs related about VF driver. [Patch 3/6 - Patch 6/6] fix the bugs about ethtool_ops.set_channels. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
This patch adds support for VF driver inner interface hclgevf_ops.get_tqps_and_rss_info. This interface will be used in the initialization process. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
HNS3 driver should alloc netdev with max support ring num, as driver support change netdev count by ethtool -L. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
Command HCLGE_OPC_CFG_COM_TQP_QUEUE should use queue id in the function, but command HCLGE_OPC_RESET_TQP_QUEUE should use global queue id. This patch fixes the queue id about queue enable/disable/reset. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
This patch fixes the endian issue when PF get mbx message flag. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
Driver check the out_vld bit when get a new cmdq BD, if the bit is 1, the BD is valid. driver Should set the bit 0 after used and hw will set the bit 1 if get a valid BD. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
VF driver should get the real rss_size which is assigned by host PF, not rss_size_max. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arkadi Sharshevsky 提交于
Let dpipe/resource be retrieved by unprivileged users. Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anders Roxell 提交于
We miss CONFIG_* fragments so test fib-onlink-tests.sh can do: ip li add lisa type vrf table 1101 ip li add veth1 type veth peer name veth2 And the follow message occurs if it isn't enabled: Configuring interfaces RTNETLINK answers: Operation not supported This enables for NET_NRF (and friends) and VETH so we can create a vrf table and veth. Fixes: 153e1b84 ("selftests: Add FIB onlink tests") Signed-off-by: NAnders Roxell <anders.roxell@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
The rx_handler field is rcu-protected, but I forgot to use the proper accessor while refactoring netif_is_ipvlan_port(). Such function only check the rx_handler value, so it is safe, but we need to properly read rx_handler via rcu_access_pointer() to avoid sparse warnings. Fixes: 1ec54cb4 ("net: unpollute priv_flags space") Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2018 27 次提交
-
-
由 Eric Dumazet 提交于
Kirill found that recently added synchronize_rcu() call in ip6mr_sk_done() was slowing down netns dismantle and posted a patch to use it only if the socket was found. I instead suggested to get rid of this call, and use instead SOCK_RCU_FREE We might later change IPv4 side to use the same technique and unify both stacks. IPv4 does not use synchronize_rcu() but has a call_rcu() that could be replaced by SOCK_RCU_FREE. Tested: time for i in {1..1000}; do unshare -n /bin/false;done Before : real 7m18.911s After : real 10.187s Fixes: 8571ab47 ("ip6mr: Make mroute_sk rcu-based") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NKirill Tkhai <ktkhai@virtuozzo.com> Cc: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sowmini Varadhan says: ==================== RDS: zerocopy code enhancements A couple of enhancements to the rds zerocop code - patch 1 refactors rds_message_copy_from_user to pull the zcopy logic into its own function - patch 2 drops the usage sk_buff to track MSG_ZEROCOPY cookies and uses a simple linked list (enhancement suggested by willemb during code review) ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Commit 401910db ("rds: deliver zerocopy completion notification with data") removes support fo r zerocopy completion notification on the sk_error_queue, thus we no longer need to track the cookie information in sk_buff structures. This commit removes the struct sk_buff_head rs_zcookie_queue by a simpler list that results in a smaller memory footprint as well as more efficient memory_allocation time. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Move the large block of code predicated on zcopy from rds_message_copy_from_user into a new function, rds_message_zcopy_from_user() Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo A. R. Silva 提交于
Remove VLA usage and change the 'len' argument to a u8 and use a 256 byte buffer on the stack. Notice that these lengths are limited by the encoding field in the VPD structure, which is a u8 [1]. [1] https://marc.info/?l=linux-netdev&m=152044354814024&w=2Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesus Sanchez-Palencia 提交于
Fix the SO_ZEROCOPY switch case on sock_setsockopt() avoiding the ret values to be overwritten by the one set on the default case. Fixes: 28190752 ("sock: permit SO_ZEROCOPY on PF_RDS socket") Signed-off-by: NJesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com> Acked-by: NWillem de Bruijn <willemb@google.com> Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Maxime Chevallier says: ==================== net: mvpp2: Add Unicast filtering capabilities This series adds unicast filtering support to the Marvell PPv2 controller. This is implemented using the header parser cababilities of the PPv2, which allows for generic packet filtering based on matching patterns in the packet headers. PPv2 controller only has 256 of these entries, and we need to share them with other features, such as VLAN filtering. For each interface, we have 5 entries dedicated to unicast filtering (the controller's own address, and 4 other), and 21 to multicast filtering. When this number is reached, the controller switches to unicast or multicast promiscuous mode. The first patch reworks the function that adds and removes addresses to the filter. This is preparatory work to ease UC filter implementation. The second patch adds the UC filtering feature. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maxime Chevallier 提交于
Marvell PPv2 controller can be used to implement packet filtering based on the destination MAC address. This is already used to implement multicast filtering. This patch adds support for Unicast filtering. Filtering is based on so-called "TCAM entries" to implement filtering. Due to their limited number and the fact that these are also used for other purposes, we reserve 80 entries for both unicast and multicast filters. On top of the broadcast address, and each interface's own MAC address, we reserve 25 entries per port, 4 for unicast filters, 21 for multicast. Whenever unicast or multicast range for one port is full, the filtering is disabled and port goes into promiscuous mode for the given type of addresses. Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maxime Chevallier 提交于
The mvpp2_prs_mac_da_accept function takes into parameter both the struct representing the controller and the port id. This is meaningful when we want to create TCAM entries for non-initialized ports, but in this case we expect the port to be initialized before starting adding or removing MAC addresses to the per-port filter. This commit changes the function so that it takes struct mvpp2_port as a parameter instead. Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Fix copy&paste error and pass proper flags. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Fix the "ok" action test so it checks that packet that is okayed does not continue to be processed by other rules. Fix error message as well. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johan Hovold 提交于
Drop bogus call to usb_driver_release_interface() from an error path in the usbnet bind() callback, which is called during interface probe. At this point the interface is not bound and usb_driver_release_interface() returns early. Also remove the bogus call to clear the interface data, which is owned by the usbnet driver and would not even have been set by the time bind() is called. Signed-off-by: NJohan Hovold <johan@kernel.org> Acked-by: NOliver Neukum <oneukum@suse.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johan Hovold 提交于
Drop bogus call to usb_driver_release_interface() from an error path in the usbnet bind() callback, which is called during interface probe. At this point the interface is not bound and usb_driver_release_interface() returns early. Also remove the bogus call to clear the interface data, which is owned by the usbnet driver and would not even have been set by the time bind() is called. Signed-off-by: NJohan Hovold <johan@kernel.org> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mlx5-updates-2018-02-28-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== mlx5-updates-2018-02-28-1 (IPSec-1) This series consists of some fixes and refactors for the mlx5 drivers, especially around the FPGA and flow steering. Most of them are trivial fixes and are the foundation of allowing IPSec acceleration from user-space. We use flow steering abstraction in order to accelerate IPSec packets. When a user creates a steering rule, [s]he states that we'll carry an encrypt/decrypt flow action (using a specific configuration) for every packet which conforms to a certain match. Since currently offloading these packets is done via FPGA, we'll add another set of flow steering ops. These ops will execute the required FPGA commands and then call the standard steering ops. In order to achieve this, we need that the commands will get all the required information. Therefore, we pass the fte object and embed the flow_action struct inside the fte. In addition, we add the shim layer that will later be used for alternating between the standard and the FPGA steering commands. Some fixes, like " net/mlx5e: Wait for FPGA command responses with a timeout" are very relevant for user-space applications, as these applications could be killed, but we still want to wait for the FPGA and update the kernel's database. Regards, Aviad and Matan ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefano Brivio 提交于
One single test implemented so far: test_pmtu_vti6_exception checks that the PMTU of a route exception, caused by a tunnel exceeding the link layer MTU, is affected by administrative changes of the tunnel MTU. Creation of the route exception is checked too. Requested-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NStefano Brivio <sbrivio@redhat.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
RX rings can fit most of the time in a contiguous piece of memory, so lets use kvzalloc_node/kvfree instead of vzalloc_node/vfree Note that kvzalloc_node() automatically falls back to another node, there is no need to do the fallback ourselves. Signed-off-by: NEric Dumazet <edumazet@google.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fengguang Wu 提交于
drivers/net/ethernet/cisco/enic/vnic_dev.c:1294:9-10: WARNING: return of 0/1 in function 'vnic_dev_capable_udp_rss' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Fixes: 48398b6e ("enic: set UDP rss flag") CC: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fengguang Wu 提交于
drivers/net/dsa/mv88e6xxx/serdes.c:66:9-10: WARNING: return of 0/1 in function 'mv88e6352_port_has_serdes' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Fixes: eb755c3f ("net: dsa: mv88e6xxx: Add helper to determining if port has SERDES") CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jerome Brunet 提交于
If we fail to register the mdio bus due to probe defer, we should not print an error message. Just be silent in this case. Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
the ipvlan device driver defines and uses 2 bits inside the priv_flags net_device field. Such bits and the related helper are used only inside the ipvlan device driver, and the core networking does not need to be aware of them. This change moves netif_is_ipvlan* helper in the ipvlan driver and re-implement them looking for ipvlan specific symbols instead of using priv_flags. Overall this frees two bits inside priv_flags - and move the following ones to avoid gaps - without any intended functional change. Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Heiner Kallweit says: ==================== net: phy: remove phy_error from phy_disable_interrupts All callers of phy_disable_interrupts() call phy_error() in the error case. Therefore we don't need to do this within the function too. This change also allows us to use phy_disable_interrupts() in code holding phydev->lock (because phy_error() takes this lock). Make use of this in phy_stop(). v2: - splitted into two separate patches ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
Now that phy_disable_interrupts() can't take lock phydev->lock any longer, we can use it to simplify phy_stop(). Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
All callers of phy_disable_interrupts() call phy_error() in the error case. Therefore we don't need to do this within the function too. This change also allows us to use phy_disable_interrupts() in code holding phydev->lock (because phy_error() can take this lock). Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Prashant Bhole 提交于
execute the subprocess in netns using 'ip netns exec' Fixes: cc30c93f ("selftests/net: ignore background traffic in psock_fanout") Signed-off-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 kbuild test robot 提交于
Fixes: effbf5f5 ("net: mvpp2: update the BM buffer free/destroy logic") Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo A. R. Silva 提交于
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brandon Streiff 提交于
There are two compatibility strings for mv88e6xxx, but it isn't clear from the documentation why only those two exist when the mv88e6xxx driver supports more than the 6085 and 6190. Briefly describe how the compatible property is used, and provide guidance on which to use. The model list comes from looking at port_base_addr values (0x0 vs 0x10) in drivers/net/dsa/mv88e6xxx/chip.c. Signed-off-by: NBrandon Streiff <brandon.streiff@ni.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-