- 25 1月, 2011 12 次提交
-
-
-
由 Eric Dumazet 提交于
commit a8b690f9 (tcp: Fix slowness in read /proc/net/tcp) introduced a bug in handling of SYN_RECV sockets. st->offset represents number of sockets found since beginning of listening_hash[st->bucket]. We should not reset st->offset when iterating through syn_table[st->sbucket], or else if more than ~25 sockets (if PAGE_SIZE=4096) are in SYN_RECV state, we exit from listening_get_next() with a too small st->offset Next time we enter tcp_seek_last_pos(), we are not able to seek past already found sockets. Reported-by: NPK <runningdoglackey@yahoo.com> CC: Tom Herbert <therbert@google.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Family was hard-coded to AF_INET but should be daddr->family. This fixes crashes when unlinking ipv6 peer entries, since the unlink code was looking up the base pointer properly. Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
Suppose that several linear skbs of the same flow were received by GRO. They were thus merged into one skb with a frag_list. Then a new skb of the same flow arrives, but it is a paged skb with data starting in its frags[]. Before adding the skb to the frag_list skb_gro_receive() will of course adjust the skb to throw away the headers. It correctly modifies the page_offset and size of the frag, but it leaves incorrect information in the skb: ->data_len is not decreased at all. ->len is decreased only by headlen, as if no change were done to the frag. Later in a receiving process this causes skb_copy_datagram_iovec() to return -EFAULT and this is seen in userspace as the result of the recv() syscall. In practice the bug can be reproduced with the sfc driver. By default the driver uses an adaptive scheme when it switches between using napi_gro_receive() (with skbs) and napi_gro_frags() (with pages). The bug is reproduced when under rx load with enough successful GRO merging the driver decides to switch from the former to the latter. Manual control is also possible, so reproducing this is easy with netcat: - on machine1 (with sfc): nc -l 12345 > /dev/null - on machine2: nc machine1 12345 < /dev/zero - on machine1: echo 1 > /sys/module/sfc/parameters/rx_alloc_method # use skbs echo 2 > /sys/module/sfc/parameters/rx_alloc_method # use pages - See that nc has quit suddenly. [v2: Modified by Eric Dumazet to avoid advancing skb->data past the end and to use a temporary variable.] Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Eric Dumazet 提交于
Commit 941666c2 "net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()" introduced a regression, reported by Jamie Heilman. "arp -Ds 192.168.2.41 eth0 pub" triggered the ASSERT_RTNL() assert in pneigh_lookup() Removing RTNL requirement from arp_ioctl() was a mistake, just revert that part. Reported-by: NJamie Heilman <jamie@audible.transient.net> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shaohua Li 提交于
Fix a shutdown regression caused by 2a2d31c8 ("intel_idle: open broadcast clock event"). The clockevent framework can automatically shutdown broadcast timers for hotremove CPUs. And we get a shutdown regression when we shutdown broadcast timer for hot remove CPU, so just delete some code. Also fix some section mismatch. Reported-by: NAri Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: NShaohua Li <shaohua.li@intel.com> Tested-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: DMA: clear interrupt status correctly OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration arm: omap3: cm-t3517: minor comment fix arm: omap3: cm-t3517: rtc fix omap1: Fix sched_clock implementation when both MPU timer and 32K timer are used omap1: Fix booting for 15xx and 730 with omap1_defconfig omap1: Fix sched_clock for the MPU timer OMAP: PRCM: remove duplicated headers OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4 OMAP: counter_32k: init clocksource as part of machine timer init
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix time function double declaration with glibc perf tools: Fix build by checking if extra warnings are supported perf tools: Fix build when using gcc 3.4.6 perf tools: Add missing header, fixes build perf tools: Fix 64 bit integer format strings perf test: Fix build on older glibcs perf: perf_event_exit_task_context: s/rcu_dereference/rcu_dereference_raw/ perf test: Use cpu_map->[cpu] when setting affinity perf symbols: Fix annotation of thumb code perf: Annotate cpuctx->ctx.mutex to avoid a lockdep splat powerpc, perf: Fix frequency calculation for overflowing counters (FSL version) perf: Fix perf_event_init_task()/perf_event_free_task() interaction perf: Fix find_get_context() vs perf_event_exit_task() race
-
由 Linus Torvalds 提交于
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: Remove Kconfig symbol for UIE emulation RTC: Properly handle rtc_read_alarm error propagation and fix bug RTC: Propagate error handling via rtc_timer_enqueue properly acpi_pm: Clear pmtmr_ioport if acpi_pm initialization fails rtc: Cleanup removed UIE emulation declaration hrtimers: Notify hrtimer users of switches to NOHZ mode
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix poor interactivity on UP systems due to group scheduler nice tune bug
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix jump label with RO/NX module protection crash x86, hotplug: Fix powersavings with offlined cores on AMD x86, mcheck, therm_throt.c: Export symbol platform_thermal_notify to allow coretemp to handler intr x86: Use asm-generic/cacheflush.h x86: Update CPU cache attributes table descriptors
-
- 24 1月, 2011 20 次提交
-
-
由 Marc Kleine-Budde 提交于
Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with an unused identifier. This patch implements the second part of the workaround. A sysfs entry "mb0_id" is introduced. While the interface is down it can be used to configure the can_id of mailbox 0. The default value id 0x7ff. In order to use an extended can_id add the CAN_EFF_FLAG (0x80000000U) to the can_id. Example: - standard id 0x7ff: echo 0x7ff > /sys/class/net/can0/mb0_id - extended id 0x1fffffff: echo 0x9fffffff > /sys/class/net/can0/mb0_id Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Acked-by: NKurt Van Dijck <kurt.van.dijck@eia.be> For the Documentation-part: Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Marc Kleine-Budde 提交于
Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with a unused identifier. This patch implements the first part of the workaround, it updates AT91_MB_RX_NUM and AT91_MB_RX_FIRST (and the inline documentation) so that mailbox 0 stays unused. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Acked-by: NKurt Van Dijck <kurt.van.dijck@eia.be>
-
由 Marc Kleine-Budde 提交于
This patch cleans up the usage of two macros which specify the mailbox usage. AT91_MB_RX_FIRST and AT91_MB_RX_NUM define the first and the number of RX mailboxes. The current driver uses these variables in an unclean way; assuming that AT91_MB_RX_FIRST is 0; This patch cleans up the usage of these macros, no longer assuming AT91_MB_RX_FIRST == 0. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Acked-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Yong Zhang 提交于
Michael Witten and Christian Kujau reported that the autogroup scheduling feature hurts interactivity on their UP systems. It turns out that this is an older bug in the group scheduling code, and the wider appeal provided by the autogroup feature exposed it more prominently. When on UP with FAIR_GROUP_SCHED enabled, tune shares only affect tg->shares, but is not reflected in tg->se->load. The reason is that update_cfs_shares() does nothing on UP. So introduce update_cfs_shares() for UP && FAIR_GROUP_SCHED. This issue was found when enable autogroup scheduling was enabled, but it is an older bug that also exists on cgroup.cpu on UP. Reported-and-Tested-by: NMichael Witten <mfwitten@gmail.com> Reported-and-Tested-by: NChristian Kujau <christian@nerdbynature.de> Signed-off-by: NYong Zhang <yong.zhang0@gmail.com> Acked-by: NPekka Enberg <penberg@kernel.org> Acked-by: NMike Galbraith <efault@gmx.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20110124073352.GA24186@windriver.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* 'BUG_ON' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: Remove MAYBE_BUILD_BUG_ON BUILD_BUG_ON: make it handle more cases
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: fix missing semicolons in MODULE macro usage param: add null statement to compiled-in module params module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n module: show version information for built-in modules in sysfs
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: selinux: return -ENOMEM when memory allocation fails tpm: fix panic caused by "tpm: Autodetect itpm devices" TPM: Long default timeout fix trusted keys: Fix a memory leak in trusted_update(). keys: add trusted and encrypted maintainers encrypted-keys: rename encrypted_defined files to encrypted trusted-keys: rename trusted_defined files to trusted
-
由 Rusty Russell 提交于
Now BUILD_BUG_ON() can handle optimizable constants, we don't need MAYBE_BUILD_BUG_ON any more. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
BUILD_BUG_ON used to use the optimizer to do code elimination or fail at link time; it was changed to first the size of a negative array (a nicer compile time error), then (in 8c87df45) to a bitfield. This forced us to change some non-constant cases to MAYBE_BUILD_BUG_ON(); as Jan points out in that commit, it didn't work as intended anyway. bitfields: needs a literal constant at parse time, and can't be put under "if (__builtin_constant_p(x))" for example. negative array: can handle anything, but if the compiler can't tell it's a constant, silently has no effect. link time: breaks link if the compiler can't determine the value, but the linker output is not usually as informative as a compiler error. If we use the negative-array-size method *and* the link time trick, we get the ability to use BUILD_BUG_ON() under __builtin_constant_p() branches, and maximal ability for the compiler to detect errors at build time. We also document it thoroughly. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Jan Beulich <JBeulich@novell.com> Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
-
由 Rusty Russell 提交于
You always needed them when you were a module, but the builtin versions of the macros used to be more lenient. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Linus Walleij 提交于
Add an unused struct declaration statement requiring a terminating semicolon to the compile-in case to provoke an error if __MODULE_INFO() is used without the terminating semicolon. Previously MODULE_ALIAS("foo") (no semicolon) compiled fine if MODULE was not selected. Cc: Dan Carpenter <error27@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
lib/built-in.o:(__modver+0x8): undefined reference to `__modver_version_show' lib/built-in.o:(__modver+0x2c): undefined reference to `__modver_version_show' Simplest to just not emit anything: if they've disabled SYSFS they probably want the smallest kernel possible. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Dmitry Torokhov 提交于
Currently only drivers that are built as modules have their versions shown in /sys/module/<module_name>/version, but this information might also be useful for built-in drivers as well. This especially important for drivers that do not define any parameters - such drivers, if built-in, are completely invisible from userspace. This patch changes MODULE_VERSION() macro so that in case when we are compiling built-in module, version information is stored in a separate section. Kernel then uses this data to create 'version' sysfs attribute in the same fashion it creates attributes for module parameters. Signed-off-by: NDmitry Torokhov <dtor@vmware.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Davidlohr Bueso 提交于
Return -ENOMEM when memory allocation fails in cond_init_bool_indexes, correctly propagating error code to caller. Signed-off-by: NDavidlohr Bueso <dave@gnu.org> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Olof Johansson 提交于
commit 3f0d3d01 adds a check for PNP device id to the common tpm_tis_init() function, which in some cases (force=1) will be called without the device being a member of a pnp_dev. Oopsing and panics ensue. Move the test up to before the call to tpm_tis_init(), since it just modifies a global variable anyway. Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Rajiv Andrade 提交于
If duration variable value is 0 at this point, it's because chip->vendor.duration wasn't filled by tpm_get_timeouts() yet. This patch sets then the lowest timeout just to give enough time for tpm_get_timeouts() to further succeed. This fix avoids long boot times in case another entity attempts to send commands to the TPM when the TPM isn't accessible. Signed-off-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Jesper Juhl 提交于
One failure path in security/keys/trusted.c::trusted_update() does not free 'new_p' while the others do. This patch makes sure we also free it in the remaining path (if datablob_parse() returns different from Opt_update). Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Mimi Zohar 提交于
Add myself and David Safford as maintainers for trusted/encrypted keys. Signed-off-by: NMimi Zohar <zohar@us.ibm.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Mimi Zohar 提交于
Rename encrypted_defined.c and encrypted_defined.h files to encrypted.c and encrypted.h, respectively. Based on request from David Howells. Signed-off-by: NMimi Zohar <zohar@us.ibm.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Mimi Zohar 提交于
Rename trusted_defined.c and trusted_defined.h files to trusted.c and trusted.h, respectively. Based on request from David Howells. Signed-off-by: NMimi Zohar <zohar@us.ibm.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 23 1月, 2011 8 次提交
-
-
由 matthieu castet 提交于
If we use jump table in module init, there are marked as removed in __jump_table section after init is done. But we already applied ro permissions on the module, so we can't modify a read only section (crash in remove_jump_label_module_init). Make the __jump_table section rw. Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr> Cc: Xiaotian Feng <xtfeng@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Siarhei Liakh <sliakh.lkml@gmail.com> Cc: Xuxian Jiang <jiang@cs.ncsu.edu> Cc: James Morris <jmorris@namei.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Dave Jones <davej@redhat.com> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4D3C3F20.7030203@free.fr> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Randy Dunlap 提交于
Fix new fs/dcache.c kernel-doc warnings: Warning(fs/dcache.c:184): No description found for parameter 'dentry' Warning(fs/dcache.c:296): No description found for parameter 'parent' Warning(fs/dcache.c:1985): No description found for parameter 'dparent' Warning(fs/dcache.c:1985): Excess function parameter 'parent' description in 'd_validate' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Nick Piggin <npiggin@kernel.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new rapidio kernel-doc warnings: Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev' Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev_port' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix move of drivers/serial/ to drivers/tty/, where it broke one of the docbook files: docproc: drivers/serial/serial_core.c: No such file or directory Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Renninger 提交于
It's enough to include the local "debug.h" file to trigger it. man time reveals this is already declared in glibc: time - get time in seconds -> rename the variable. Cc: Ingo Molnar <mingo@elte.hu> Cc: arjan@infradead.org LPU-Reference: <1295620209-13859-2-git-send-email-trenn@suse.de> Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The -Wstack-protector and -Wvolatile-register-var warnings, for instance, are not supported by gcc 3.4.6. So fix by doing the same check we already do for -fstack-protector-all. With this and the other patches in this series, perf builds unmodified on, for instance, RHEL4. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
[acme@localhost linux]$ make O=~acme/git/build/perf -C tools/perf make: Entering directory `/home/acme/git/linux/tools/perf' Makefile:526: No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev Makefile:582: newt not found, disables TUI support. Please install newt-devel or libnewt-dev CC /home/acme/git/build/perf/builtin-annotate.o In file included from builtin-annotate.c:23: util/parse-events.h:26: warning: declaration of 'evsel_list' shadows a global declaration util/parse-events.h:12: warning: shadowed declaration is here make: *** [/home/acme/git/build/perf/builtin-annotate.o] Error 1 make: Leaving directory `/home/acme/git/linux/tools/perf' [acme@localhost linux]$ gcc --version | head -1 gcc (GCC) 3.4.6 20060404 (Red Hat 3.4.6-11) [acme@localhost linux]$ Fix it by renaming the parameter to evlist. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
We need the definiton for __always_inline in bitops.h to fix the build on distros where it isn't available or compiler.h doesn't get included indirectly. One of the fixes needed to build perf on RHEL4 systems, for instance. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-