The commit 9d901bc0 ("rhashtable:
Free bucket tables asynchronously after rehash") causes gratuitous
failures in rhashtable_remove.

The reason is that it inadvertently introduced multiple rehashing
from the perspective of readers.  IOW it is now possible to see
more than two tables during a single RCU critical section.

Fortunately the other reader rhashtable_lookup already deals with
this correctly thanks to c4db8848
("rhashtable: rhashtable: Move future_tbl into struct bucket_table")
so only rhashtable_remove is broken by this change.

This patch fixes this by looping over every table from the first
one to the last or until we find the element that we were trying
to delete.

Incidentally the simple test for detecting rehashing to prevent
starting another shrinking no longer works.  Since it isn't needed
anyway (the work queue and the mutex serves as a natural barrier
to unnecessary rehashes) I've simply killed the test.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit c4db8848 ("rhashtable:
Move future_tbl into struct bucket_table") introduced a use-after-
free bug in rhashtable_walk_stop because it dereferences tbl after
droping the RCU read lock.

This patch fixes it by moving the RCU read unlock down to the bottom
of rhashtable_walk_stop.  In fact this was how I had it originally
but it got dropped while rearranging patches because this one
depended on the async freeing of bucket_table.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for Hardware Filter Block (HFB) so that incoming Rx traffic
can be matched and directed to desired Rx queues.
Signed-off-by: NPetri Gynther <pgynther@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
bpf: allow eBPF access skb fields

V1->V2:
- refactored field access converter into common helper convert_skb_access()
  used in both classic and extended BPF
- added missing build_bug_on for field 'len'
- added comment to uapi/linux/bpf.h as suggested by Daniel
- dropped exposing 'ifindex' field for now

classic BPF has a way to access skb fields, whereas extended BPF didn't.
This patch introduces this ability.

Classic BPF can access fields via negative SKF_AD_OFF offset.
Positive bpf_ld_abs N is treated as load from packet, whereas
bpf_ld_abs -0x1000 + N is treated as skb fields access.
Many offsets were hard coded over years: SKF_AD_PROTOCOL, SKF_AD_PKTTYPE, etc.
The problem with this approach was that for every new field classic bpf
assembler had to be tweaked.

I've considered doing the same for extended, but for every new field LLVM
compiler would have to be modifed. Since it would need to add a new intrinsic.
It could be done with single intrinsic and magic offset or use of inline
assembler, but neither are clean from compiler backend point of view, since
they look like calls but shouldn't scratch caller-saved registers.

Another approach was to introduce a new helper functions like bpf_get_pkt_type()
for every field that we want to access, but that is equally ugly for kernel
and slow, since helpers are calls and they are slower then just loads.
In theory helper calls can be 'inlined' inside kernel into direct loads, but
since they were calls for user space, compiler would have to spill registers
around such calls anyway. Teaching compiler to treat such helpers differently
is even uglier.

They were few other ideas considered. At the end the best seems to be to
introduce a user accessible mirror of in-kernel sk_buff structure:

struct __sk_buff {
    __u32 len;
    __u32 pkt_type;
    __u32 mark;
    __u32 queue_mapping;
};

bpf programs will do:

int bpf_prog1(struct __sk_buff *skb)
{
    __u32 var = skb->pkt_type;

which will be compiled to bpf assembler as:

dst_reg = *(u32 *)(src_reg + 4) // 4 == offsetof(struct __sk_buff, pkt_type)

bpf verifier will check validity of access and will convert it to:

dst_reg = *(u8 *)(src_reg + offsetof(struct sk_buff, __pkt_type_offset))
dst_reg &= 7

since 'pkt_type' is a bitfield.

No new instructions added. LLVM doesn't need to be modified.
JITs don't change and verifier already knows when it accesses 'ctx' pointer.
The only thing needed was to convert user visible offset within __sk_buff
to kernel internal offset within sk_buff.
For 'len' and other fields conversion is trivial.
Converting 'pkt_type' takes 2 or 3 instructions depending on endianness.
More fields can be exposed by adding to the end of the 'struct __sk_buff'.
Like vlan_tci and others can be added later.

When pkt_type field is moved around, goes into different structure, removed or
its size changes, the function convert_skb_access() would need to updated and
it will cover both classic and extended.

Patch 2 updates examples to demonstrates how fields are accessed and
adds new tests for verifier, since it needs to detect a corner case when
attacker is using single bpf instruction in two branches with different
register types.

The 4 fields of __sk_buff are already exposed to user space via classic bpf and
I believe they're useful in extended as well.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- modify sockex1 example to count number of bytes in outgoing packets
- modify sockex2 example to count number of bytes and packets per flow
- add 4 stress tests that exercise 'skb->field' code path of verifier
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

introduce user accessible mirror of in-kernel 'struct sk_buff':
struct __sk_buff {
    __u32 len;
    __u32 pkt_type;
    __u32 mark;
    __u32 queue_mapping;
};

bpf programs can do:

int bpf_prog(struct __sk_buff *skb)
{
    __u32 var = skb->pkt_type;

which will be compiled to bpf assembler as:

dst_reg = *(u32 *)(src_reg + 4) // 4 == offsetof(struct __sk_buff, pkt_type)

bpf verifier will check validity of access and will convert it to:

dst_reg = *(u8 *)(src_reg + offsetof(struct sk_buff, __pkt_type_offset))
dst_reg &= 7

since skb->pkt_type is a bitfield.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
eBPF updates

Two small eBPF helper additions to better match up with ancillary
classic BPF functionality.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the possibility to obtain raw_smp_processor_id() in
eBPF. Currently, this is only possible in classic BPF where commit
da2033c2 ("filter: add SKF_AD_RXHASH and SKF_AD_CPU") has added
facilities for this.

Perhaps most importantly, this would also allow us to track per CPU
statistics with eBPF maps, or to implement a poor-man's per CPU data
structure through eBPF maps.

Example function proto-type looks like:

  u32 (*smp_processor_id)(void) = (void *)BPF_FUNC_get_smp_processor_id;
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This work is similar to commit 4cd3675e ("filter: added BPF
random opcode") and adds a possibility for packet sampling in eBPF.

Currently, this is only possible in classic BPF and useful to
combine sampling with f.e. packet sockets, possible also with tc.

Example function proto-type looks like:

  u32 (*prandom_u32)(void) = (void *)BPF_FUNC_get_prandom_u32;
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Claudiu Manoil says:

====================
gianfar: ARM port driver updates (2/2)

The 2nd round of driver updates to make gianfar portable on ARM,
for the ARM based SoC that integrates eTSEC - "ls1021a".
The patches address the bulk of remaining endianess issues -
handling DMA fields (BD and FCB), and device tree properties.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use of_property_read*() to get arch endian consistent
property values. Do some refactoring in the process.
Signed-off-by: NJingchang Lu <jingchang.lu@freescale.com>
Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use conversion macros to correctly access the BE
fields of the Rx and Tx Frame Control Block on LE CPUs.
Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use conversion macros to correctly access the BE
fields of the Rx and Tx Buffer Descriptors on LE CPUs.
Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Herbert Xu says:

====================
rhashtable: Fixes + cleanups + preparation for multiple rehash

Patch 1 fixes the walker so that it behaves properly even during
a resize.

Patch 2-3 are cleanups.

Patch 4-6 lays some ground work for the upcoming multiple rehashing.

This revision fixes the warning coming from the bucket_table->size
downsize and improves its changelog.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves future_tbl to open up the possibility of having
multiple rehashes on the same table.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a rehash counter to bucket_table to indicate
the last bucket that has been rehashed.  This serves two purposes:

1. Any bucket that has been rehashed can never gain a new object.
2. If the rehash counter reaches the size of the table, the table
will forever remain empty.

This patch also downsizes bucket_table->size to an unsigned int
since we do not support sizes greater than 32 bits yet.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is in fact no need to wait for an RCU grace period in the
rehash function, since all insertions are guaranteed to go into
the new table through spin locks.

This patch uses call_rcu to free the old/rehashed table at our
leisure.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It seems that I have already made every rehash redo the random
seed even though my commit message indicated otherwise :)

Since we have already taken that step, this patch goes one step
further and moves the seed initialisation into bucket_table_alloc.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We only nest one level deep there is no need to roll our own
subclasses.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously whenever the walker encountered a resize it simply
snaps back to the beginning and starts again.  However, this only
works if the rehash started and completed while the walker was
idle.

If the walker attempts to restart while the rehash is still ongoing,
we may miss objects that we shouldn't have.

This patch fixes this by making the walker walk the old table
followed by the new table just like all other readers.  If a
rehash is detected we will still signal our caller of the fact
so they can prepare for duplicates but we will simply continue
the walk onto the new table after the old one is finished either
by us or by the rehasher.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit cd28a1a9 ("net: dsa: fully divert PHY reads/writes if
requested") introduced a check for particular PHYs that need to be
accessed using the slave MII bus created by DSA, but this check was too
inclusive. This would prevent fixed PHYs from being successfully
registered because those should not go through the slave MII bus created
by DSA.

Make sure we check that the PHY is not a fixed PHY to prevent that from
happening.

Fixes: cd28a1a9 ("net: dsa: fully divert PHY reads/writes if requested")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-03-13

This series contains updates to ixgbe and ixgbevf.

Don adds additional support for X550 MAC types, which require additional
steps around enabling and disabling Rx.  Also cleans up variable type
inconsistency.

I provide a patch to allow relaxed ordering to be enabled on SPARC
architectures.  Also cleans up ixgbevf whitespace and code comments to
align the driver with networking coding standard.  Lastly cleaned up
uses of memcpy() where ether_addr_copy() could have been used.

Alex removes some dead code in the ixgbe cleanup patch.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
inet: tcp listener refactoring, part 9

This preliminary work pushes socket convergence a bit more:

1) request sock ir_iif is universally set

2) inet_diag can use common helpers to reduce LOC
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now the three type of sockets share a common base, we can factorize
code in inet_diag_msg_common_fill().

inet_diag_entry no longer requires saddr_storage & daddr_storage
and the extra copies.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

inet_sk_diag_fill() only copes with non timewait and non request socks
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Once request socks will be in ehash table, they will need to have
a valid ir_iff field.

This is currently true only for IPv6. This patch extends support
for IPv4 as well.

This means inet_diag_fill_req() can now properly use ir_iif,
which is better for IPv6 link locals anyway, as request sockets
and established sockets will propagate consistent netlink idiag_if.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jon Maloy says:

====================
tipc: some optimizations and impovements

The commits in this series contain some relatively simple changes that
lead to better throughput across TIPC connections. We also make changes
to the implementation of link transmission queueing and priority
handling, in order to make the code more comprehensible and maintainable.

v2: Commit #2: Redesigned tipc_msg_validate() to use pskb_may_pull(),
               as per feedback from David Miller.
    Commit #3: Some cosmetic changes to tipc_msg_extract(). I tried to
               replace the unconditional skb_linearize() with calls to
               pskb_may_pull() at selected locations, but I gave up.
               First, skb_trim() requires a fully linearized buffer.
               Second, it doesn't make much sense; the whole buffer
               will end up linearized, one way or another.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Messages transferred by TIPC are assigned an "importance priority", -an
integer value indicating how to treat the message when there is link or
destination socket congestion.

There is no separate header field for this value. Instead, the message
user values have been chosen in ascending order according to perceived
importance, so that the message user field can be used for this.

This is not a good solution. First, we have many more users than the
needed priority levels, so we end up with treating more priority
levels than necessary. Second, the user field cannot always
accurately reflect the priority of the message. E.g., a message
fragment packet should really have the priority of the enveloped
user data message, and not the priority of the MSG_FRAGMENTER user.
Until now, we have been working around this problem in different ways,
but it is now time to implement a consistent way of handling such
priorities, although still within the constraint that we cannot
allocate any more bits in the regular data message header for this.

In this commit, we define a new priority level, TIPC_SYSTEM_IMPORTANCE,
that will be the only one used apart from the four (lower) user data
levels. All non-data messages map down to this priority. Furthermore,
we take some free bits from the MSG_FRAGMENTER header and allocate
them to store the priority of the enveloped message. We then adjust
the functions msg_importance()/msg_set_importance() so that they
read/set the correct header fields depending on user type.

This small protocol change is fully compatible, because the code at
the receiving end of a link currently reads the importance level
only from user data messages, where there is no change.
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct tipc_link contains one single queue for outgoing packets,
where both transmitted and waiting packets are queued.

This infrastructure is hard to maintain, because we need
to keep a number of fields to keep track of which packets are
sent or unsent, and the number of packets in each category.

A lot of code becomes simpler if we split this queue into a transmission
queue, where sent/unacknowledged packets are kept, and a backlog queue,
where we keep the not yet sent packets.

In this commit we do this separation.
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The unicast packet header contains a broadcast acknowledge sequence
number, that may need to be conveyed to the broadcast link for proper
treatment. Currently, the function tipc_rcv(), which is on the most
critical data path, calls the function tipc_bclink_acknowledge() to
have this done. This call is made for each received packet, and results
in the unconditional grabbing of the broadcast link spinlock.

This is unnecessary, since we can see directly from tipc_rcv() if
the acknowledged number differs from what has been previously acked
from the node in question. In the vast majority of cases the numbers
won't differ, and there is nothing to update.

We now make the call to tipc_bclink_acknowledge() conditional
to that the two ack values differ.
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we currently extract a bundled buffer from a message bundle in
the function tipc_msg_extract(), we allocate a new buffer and explicitly
copy the linear data area.

This is unnecessary, since we can just clone the buffer and do
skb_pull() on the clone to move the data pointer to the correct
position.

This is what we do in this commit.
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, TIPC linearizes all incoming buffers directly at reception
before passing them upwards in the stack. This is clearly a waste of
CPU resources, and must be avoided.

In this commit, we eliminate this unnecessary linearization. We still
ensure that at least the message header is linear, and that the buffer
is linearized where this is still needed, i.e. when unbundling and when
reversing messages.

In addition, we ensure that fragmented messages are validated after
reassembly before delivering them upwards in the stack.
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function link_buf_validate() is in reality re-entrant and context
independent, and will in later commits be called from several locations.
Therefore, we move it to msg.c, make it outline and rename the it to
tipc_msg_validate().

We also redesign the function to make proper use of pskb_may_pull()
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The TIPC protocol spec has defined a 13 bit capability bitmap in
the neighbor discovery header, as a means to maintain compatibility
between different code and protocol generations. Until now this field
has been unused.

We now introduce the basic framework for exchanging capabilities
between nodes at first contact. After exchange, a peer node's
capabilities are stored as a 16 bit bitmap in struct tipc_node.
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
Here's another set of Bluetooth & ieee802154 patches intended for 4.1:

 - Added support for QCA ROME chipset family in the btusb driver
 - at86rf230 driver fixes & cleanups
 - ieee802154 cleanups
 - Refactoring of Bluetooth mgmt API to allow new users
 - New setting for static Bluetooth address exposed to user space
 - Refactoring of hci_dev flags to remove limit of 32
 - Remove unnecessary fast-connectable setting usage restrictions
 - Fix behavior to be consistent when trying to pair already paired device
 - Service discovery corner-case fixes

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
type T;
identifier f;
@@

static T f (...) { ... }

@@
identifier r.f;
declarer name EXPORT_SYMBOL;
@@

-EXPORT_SYMBOL(f);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

These registers are also changed by transceiver and should be volatile
for right accessing via regmap debugfs.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a handling for calibration if we are 5 minutes in PLL
state. I first tried to implement the calibration functionality in
TX_ON state via register values CF_START and DCU_START, but this occurs
a one second delay at each calibration time.

An another solution to start a calibration is to switch from TRX_OFF
state into TX_ON, then a calibration is done automatically by
transceiver. This method will be used in this patch, after each transmit
of a frame we check with jiffies if the PLL is set 5 minutes without
doing a TRX_OFF->(TX_ON || RX_AACK_ON) or channel switch. The worst case
would be a transceiver in receiving mode only, but this is under normal
operation very unlikely.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Cc: Werner Almesberger <werner@almesberger.net>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch replace the state change timing relevant sleeps with
hrtimers. Currently the sleeps are done in the complete handler of
spi_async. The relation of doing the state change timing sleep with a
timer will get the sleep functionality out of spi_async complete handler
context.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch initialize xtal_trim value to zero. The xtal_trim property is
an optional device tree value. Currently if no xtal_trim property is
given the xtal_trim value can be contain random data, because it's a
stack variable. This patch init the xtal_trim value to zero which is
also the default value after reset for at86rf230 transceivers.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>