When request sock are put in ehash table, the whole notion
of having a previous request to update dl_next is pointless.

Also, following patch will get rid of big purge timer,
so we want to delete a request sock without holding listener lock.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Round up min_size respectively round down max_size to the next power
of two to make sure we always respect the limit specified by the
user. This is required because we compare the table size against the
limit before we expand or shrink.

Also fixes a minor bug where we modified min_size in the params
provided instead of the copy stored in struct rhashtable.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Quit complaining about a couple of events that we actually expect to see
during an NVM update.
Reported-by: NStefan Assmann <sassmann@redhat.com>
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NJim Young <james.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can't directly call ipv6_sock_mc_join() but should use the stub
instead and protect it around IS_ENABLED.

Fixes: d0f91938 ("tipc: add ip/udp media type")
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Add Device ID and make device ID table const

This patch series adds new device ID and makes device ID table const

The patches series is created against 'net-next' tree.
And includes patches on cxgb4 and csiostor driver.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make PCI Device ID Tables be "const" to move them out of the data segment and
remove a redundant check on CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN in
t4_pci_id_tbl.h to guard the contents of the include file.
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-03-19

This wont the last 4.1 bluetooth-next pull request, but we've piled up
enough patches in less than a week that I wanted to save you from a
single huge "last-minute" pull somewhere closer to the merge window.

The main changes are:

 - Simultaneous LE & BR/EDR discovery support for HW that can do it
 - Complete LE OOB pairing support
 - More fine-grained mgmt-command access control (normal user can now do
   harmless read-only operations).
 - Added RF power amplifier support in cc2520 ieee802154 driver
 - Some cleanups/fixes in ieee802154 code

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Erik Hugne says:

====================
tipc: small bugfix an support for datagram connect()

Most notable in this series is patch#3 that allows programs to associate
a tipc address with a connectionless (RDM/DGRAM) socket.

v2: Fix indent issue in patch#3
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Following the example of ip4_datagram_connect, we store the
address in the socket structure for dgram/rdm sockets and use
that as the default destination for subsequent send() calls.
It is allowed to connect to any address types, and the behaviour
of send() will be the same as a normal sendto() with this address
provided. Binding to an AF_UNSPEC address clears the association.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 1186adf7 ("tipc: simplify message forwarding and
rejection in socket layer") -EHOSTUNREACH is propagated back to
the sending process if we fail to deliver the message to another
socket local to the node.
This is wrong, host unreachable should only be reported when the
destination port/name does not exist in the cluster, and that
check is always done before sending the message. Also, this
introduces inconsistent sendmsg() behavior for local/remote
destinations. Errors occurring on the receiving side should not
trickle up to the sender. If message delivery fails TIPC should
either discard the packet or reject it back to the sender based
on the destination droppable option.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Acked-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tipc_node_remove_conn may be called twice if shutdown() is
called on a socket that have messages in the receive queue.
Calling this function twice does no harm, but is unnecessary
and we remove the redundant call.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Acked-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Fixes: b6eea9ca ("mac802154: introduce driver-ops header")
Acked-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJörg Thalheim <joerg@higgsboson.tk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a networking device is taken down that has a non-trivial number
of VLAN devices configured under it, we eat a full synchronize_net()
for every such VLAN device.

This is because of the call chain:

	NETDEV_DOWN notifier
	--> vlan_device_event()
		--> dev_change_flags()
		--> __dev_change_flags()
		--> __dev_close()
		--> __dev_close_many()
		--> dev_deactivate_many()
			--> synchronize_net()

This is kind of rediculous because we already have infrastructure for
batching doing operation X to a list of net devices so that we only
incur one sync.

So make use of that by exporting dev_close_many() and adjusting it's
interfaace so that the caller can fully manage the batch list.  Use
this in vlan_device_event() and all the overhead goes away.
Reported-by: NSalam Noureddine <noureddine@arista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On a large hash table, we can easily spend seconds to
walk over all entries. Add a cond_resched() to yield
cpu if necessary.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement the phys_port_name operation. Port names are pulled from the
rocker hardware model in qemu and default to the qemu name + port id.
e.g.,

sw1p1: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 52:54:00:12:35:01  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

where 'sw1' comes from the qemu command line -device rocker,name=sw1, and
'p1' is port 1.

Patch is adapted from Scott's phys_port_id patch.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to port id allow netdevices to specify port names and export
the name via sysfs. Drivers can implement the netdevice operation to
assist udev in having sane default names for the devices using the
rule:

$ cat /etc/udev/rules.d/80-net-setup-link.rules
SUBSYSTEM=="net", ACTION=="add", ATTR{phys_port_name}!="",
NAME="$attr{phys_port_name}"

Use of phys_name versus phys_id was suggested-by Jiri Pirko.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Acked-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, if a multicast join operation fail, the vxlan interface will
be UP but not functional, without even a log message informing the user.

Now that we can grab socket lock after already having rntl, we don't
need to defer socket creation and multicast operations. By not deferring
we can do proper error reporting to the user through ip exit code.

This patch thus removes all deferred work that vxlan had and put it back
inline. Now the socket will only be created, bound and join multicast
group when one bring the interface up, and will undo all that as soon as
one put the interface down.

As vxlan_sock_hold() is not used after this patch, it was removed too.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

in favor of their inner __ ones, which doesn't grab rtnl.

As these functions need to operate on a locked socket, we can't be
grabbing rtnl by then. It's too late and doing so causes reversed
locking.

So this patch:
- move rtnl handling to callers instead while already fixing some
  reversed locking situations, like on vxlan and ipvs code.
- renames __ ones to not have the __ mark:
  __ip_mc_{join,leave}_group -> ip_mc_{join,leave}_group
  __ipv6_sock_mc_{join,drop} -> ipv6_sock_mc_{join,drop}
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are some setsockopt operations in ipv4 and ipv6 that are grabbing
rtnl after having grabbed the socket lock. Yet this makes it impossible
to do operations that have to lock the socket when already within a rtnl
protected scope, like ndo dev_open and dev_stop.

We normally take coarse grained locks first but setsockopt inverted that.

So this patch invert the lock logic for these operations and makes
setsockopt grab rtnl if it will be needed prior to grabbing socket lock.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
inet: tcp listener refactoring, part 13

inet_hash functions are in a bad state : Too much IPv6/IPv4 copy/pasting.

Lets refactor a bit.

Idea is that we do not want to have an equivalent of inet_csk(sk)->icsk_af_ops
for request socks in order to be able to use the right variant.

In this patch series, I started to let IPv6/IPv4 converge to common helpers.

Idea is to use ipv6_addr_set_v4mapped() even for AF_INET sockets, so that
we can test
       if (sk->sk_family == AF_INET6 &&
           !ipv6_addr_v4mapped(&sk->sk_v6_daddr))
to tell if we deal with an IPv6 socket, or IPv4 one, at least in slow paths.

Ideally, we could save 8 bytes per struct sock_common, if we
alias skc_daddr & skc_rcv_saddr to skc_v6_daddr[3]/skc_v6_rcv_saddr[3].
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to be able to use sk_ehashfn() for request socks,
we need to initialize their IPv6/IPv4 addresses.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We now always call __inet_hash_nolisten(), no need to pass it
as an argument.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can now use inet_hash() and __inet_hash() instead of private
functions.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Intent is to converge IPv4 & IPv6 inet_hash functions to
factorize code.

IPv4 sockets initialize sk_rcv_saddr and sk_v6_daddr
in this patch, thanks to new sk_daddr_set() and sk_rcv_saddr_set()
helpers.

__inet6_hash can now use sk_ehashfn() instead of a private
inet6_sk_ehashfn() and will simply use __inet_hash() in a
following patch.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Goal is to unify IPv4/IPv6 inet_hash handling, and use common helpers
for all kind of sockets (full sockets, timewait and request sockets)

inet_sk_ehashfn() becomes sk_ehashfn() but still only copes with IPv4
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

const qualifiers ease code review by making clear
which objects are not written in a function.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
Add max rate TXQ attribute

Add the ability to set a max-rate limitation for TX queues.
The attribute name is maxrate and the units are Mbs, to make
it similar to the existing max-rate limitation knobs (ETS and
SRIOV ndo calls).

changes from V2:
  - added Documentation (thanks Florian and Tom)
  - rebased to latest net-next to comply with the swdev ndo removal
  - addressed more feedback from Dave on the comments style

changes from V1:
  - addressed feedback from Dave

changes from V0:
  - addressed feedback from Sergei

John Fastabend (1):
  net: Add max rate tx queue attribute
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add ndo_set_tx_maxrate support.

To support per tx queue maxrate limit, we use the update-qp firmware
command to do run-time rate setting for the qp that serves this tx ring.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the low-level device commands and definitions used for QP max-rate limiting.

This is done through the following elements:

  - read rate-limit device caps in QUERY_DEV_CAP: number of different
    rates and the min/max rates in Kbs/Mbs/Gbs units

  - enhance the QP context struct to contain rate limit units and value

  - allow to do run time rate-limit setting to QPs through the
    update-qp firmware command

  - QP rate-limiting is disallowed for VFs
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds a tx_maxrate attribute to the tx queue sysfs entry allowing
for max-rate limiting. Along with DCB-ETS and BQL this provides another
knob to tune queue performance. The limit units are Mbps.

By default it is disabled. To disable the rate limitation after it
has been set for a queue, it should be set to zero.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The TI CC2521 is an RF power amplifier that is designed to interface
with the CC2520. Conveniently, it directly interfaces with the CC2520
and does not require any pins to be connected to a
microcontroller/processor. Adding a CC2591 increases the CC2520's range,
which is useful for border router and other wall-powered applications.

Using the CC2591 with the CC2520 requires configuring the CC2520 GPIOs
that are connected to the CC2591 to correctly set the CC2591 into TX and
RX modes. Further, TI recommends that the CC2520_TXPOWER and
CC2520_AGCCTRL1 registers are set differently to maximize the CC2591's
performance. These settings are covered in TI Application Note AN065.

This patch adds an optional `amplified` field to the cc2520 entry in the
device tree. If present, the CC2520 will be configured to operate with a
CC2591.

The expected pin mapping is:
CC2520 GPIO0 --> CC2591 EN
CC2520 GPIO5 --> CC2591 PAEN
Signed-off-by: NBrad Campbell <bradjc5@gmail.com>
Acked-by: NVarka Bhadram <varkabhadram@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Storing the `platform_data` struct inside of the SPI struct when using
the device tree allows for a later function to edit the content of that
struct. This patch refactors the `cc2520_get_platformat_data` function
to accept a pointer to a `cc2520_platform_data` struct and populates
the fields inside of it.

This change mirrors commit aaa1c4d2
("at86rf230: copy pdata to driver allocated space").
Signed-off-by: NBrad Campbell <bradjc5@gmail.com>
Acked-by: NVarka Bhadram <varkabhadram@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Herbert Xu says:

====================
rhashtable: Kill redundant shift parameter

I was trying to squeeze bucket_table->rehash in by downsizing
bucket_table->size, only to find that my spot had been taken
over by bucket_table->shift.  These patches kill shift and makes
me feel better :)

v2 corrects the typo in the test_rhashtable changelog and also
notes the min_shift parameter in the tipc patch changelog.
====================
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that nobody uses max_shift and min_shift, we can safely remove
them.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch converts test_rhashtable to use rhashtable max_size
instead of the obsolete max_shift.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch converts tipc to use rhashtable max/min_size instead of
the obsolete max/min_shift.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch converts netlink to use rhashtable max_size instead
of the obsolete max_shift.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>