- 08 12月, 2006 40 次提交
-
-
由 Stefan Richter 提交于
There is no manpower available to reform oui.db into a library for use in more kernel subsystems. The low ratio of usefulness to size and the occasional need to update oui.db from IEEE's official list suggest to drop oui.db. I plan to make a userspace script available which translates the remaining numeric sysfs attributes to names of organizations. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
This also means that former parts of ieee1394's API will be subject to change or removal. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Known to be affected: - libdc1394: prefers video1394 for now, old-style raw1394 support might be dropped eventually - OpenH323 PWLib, AVC video input module: uses libraw1394's old API Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
There has been an if(...) missing, for ages. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Adjust whitespace and line lengths Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7431 iBook G3 threw a machine check exception and put the display backlight to full brightness after ohci1394 was unloaded and reloaded. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Move the body of a function into its only caller. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Some people actually look at those comments. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
It's OK to reorder list_del() and sbp2util_free_command_dma() here. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
"struct scsi_id_instance_data" represents a logical unit. Rename it to "struct sbp2_lu", and "scsi_id" to "lu". Rename some other variables too. Wrap almost all lines after at most 80 columns. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
It's 2^20 bit/s, not 0.001 bit. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Prepend sbp2*_ to anything globally defined in sbp2.c except for some macros. Strip sbp2_ from names of struct members. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
And update and reformat remaining comments. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
This work is not delayed. Also bring the code format in a state which reduces my work to merge pending sbp2 patchs. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Adjust parentheses, indentation, line lengths. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
No need to keep them in released sources. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Replace some calls to SBP2_ERR and SBP2_WARN by SBP2_INFO. Remove logging macros SBP2_NOTICE and SBP2_WARN. Remove direct usage of HPSB_ logging macros. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
The same case is handled further below in sbp2scsi_complete_command. Note, the second version behaves slightly different but looks preferable. It's an extremely unlikely case by the way. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
This has been within #if 0 for a long time and is wrong anyway. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Remove unnecessary function prototypes. Remove variable names from function prototypes. Move declarations from sbp2.h to sbp2.c. Move definitions of driver templates together near the top of sbp2.c. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
The queue depth can be read from /sys/bus/scsi/devices/*/queue_depth, so don't log it. And the hint about speed improvements is misleading, at least under current kernels. If serialization is switched off, read performance is typically increased by less than 10%. (I did not test write performance recently.) On the other hand, serialize_io=0 is not yet safe due to some implementation issues that are not trivial to fix. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Alexey Dobriyan 提交于
To print irq number no need to transform to string using %d, then print using %s. Just use %d. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
-
由 Stefan Richter 提交于
This happens. No need to log a BUG trace. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Eric Sesterhenn 提交于
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
- correct thinko in one of my last commits: cannot use PRINT macro with ohci == NULL - add log messages on ohci == NULL and on pci_enable_device != 0 - update log macros from patch "revert fail on error in suspend" to use PRINT and DBGMSG where possible Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Some errors during preparation for suspended state can be skipped with a warning instead of a failure of the whole suspend transition, notably an error in pci_set_power_state. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Randy Dunlap 提交于
Only build IEEE1394 OUI database files if the config option is enabled. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Randy Dunlap 提交于
Fix printk format warning: drivers/ieee1394/nodemgr.c:364: warning: long long unsigned int format, u64 arg (arg 3) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
- The list "struct class.children" is supposed to be protected by class.sem, not by class.subsys.rwsem. - nodemgr_remove_uds() iterated over nodemgr_ud_class.children without proper protection. This was never observed as a bug since the code is usually only accessed by knodemgrd. All knodemgrds are currently globally serialized. But userspace can trigger this code too by writing to /sys/bus/ieee1394/destroy_node. - Clean up access to the FireWire bus type's subsys.rwsem: Access it uniformly via ieee1394_bus_type. Shrink rwsem protected regions where possible. Expand them where necessary. The latter wasn't a problem so far because knodemgr is globally serialized. This should harden the interaction of ieee1394 with sysfs and lay ground for deserialized operation of multiple knodemgrds and for implementation of subthreads for parallelized scanning and probing. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Give better names to local variables. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
One hunk in "ieee1394: handle sysfs errors" was wrong. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Purges the one remaining call to lock_kernel() from the 1394 subsystem. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Daniel Drake 提交于
video1394 does not need to take the BKL. The data structures shared between file_operations and interrupts are already protected through context-specific spinlocks. The only other danger is video1394_release() being called during another operation, however this cannot happen because release is only ever invoked when the last thread has closed the fd. Signed-off-by: NDaniel Drake <ddrake@brontes3d.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Daniel Drake 提交于
Add some GCC branch prediction optimizations to unlikely error/safety conditions in the ioctl handling code commonly called during an application's capture loop. Signed-off-by: NDaniel Drake <ddrake@brontes3d.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Handle driver core errors with as much care as appropriate. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Some 80-columns pedantry, and touch up of a // comment. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
We need the mutex only around the iteration over existing hosts. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-