Messages like "icmp6_send: no reply to icmp error" are close
to useless. Adding source and destination addresses to provide
some more clue.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

exported perf symbols are GPL only, mark eBPF helper functions
used in tracing as GPL only as well.
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix safety checks for bpf_perf_event_read():
- only non-inherited events can be added to perf_event_array map
  (do this check statically at map insertion time)
- dynamically check that event is local and !pmu->count
Otherwise buggy bpf program can cause kernel splat.

Also fix error path after perf_event_attrs()
and remove redundant 'extern'.

Fixes: 35578d79 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU conuter")
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Tested-by: NWang Nan <wangnan0@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While the current driver mostly supports BCM7445 which has a hardcoded
location for its MoCA port on port 7 and port 0 for its internal PHY,
this is not necessarily true for all other chips out there such as
BCM3390 for instance.

Walk the list of ports from Device Tree, get their port number ("reg"
property), and then parse the "phy-mode" property and initialize two
internal variables: moca_port and a bitmask of internal PHYs. Since we
use interrupts for the MoCA port, we introduce two helper functions to
enable/disable interrupts and do this at the appropriate bank (INTRL2_0
or INTRL2_1).
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the FDB add, delete, and dump operations. The add and
delete operations are implemented using directed ARL operations using
the specified MAC address and consist in a read operation, write and
readback operation.

The dump operation consists in using the ARL search and software
filtering entries which are not for the desired port.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bnxt_gro_skb() has unused variables when CONFIG_INET is not set.  We
really cannot support hardware GRO if CONFIG_INET is not set, so
compile out bnxt_gro_skb() completely and define BNXT_FLAG_GRO to be 0
if CONFIG_INET is not set.  This will effectively always disable
hardware GRO if CONFIG_INET is not set.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes the mask used to update the LED configuration so that it clears
the necessary bits as well as setting the bits according to the mask.
Also reverse the LED configuration to show the Link state + collisions in
LEDA and the Link state + TX/RX events in LEDB.
Signed-off-by: NJon Ringle <jringle@gridpoint.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Russell King says:

====================
mvneta ethtool statistics

Sorry for v3 - I forgot to update the commit message on patch 1 as
requested by Marcin.

This short series adds ethtool statistics reporting to mvneta.  Having
discussed with Andrew on IRC, we decided I'd pick up his patch into my
series.

My change for patch 1 compared to the previous RFC splits out the
reading of the statistics from the hardware into a separate function,
in order to facilitate work going on elsewhere to arrange for the
statistics to be preserved across a suspend/resume cycle.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The existing function to clear the MIB statatistics was using the
wrong address for the registers. Also, the counters would of been
cleared when the interface was brought up, not during the
probe. Fix both of these.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the ethtool statistic interface, returning the full set
of statistics which both Armada 370, 38x and Armada XP can support.
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

poll(POLLOUT) on a listener should not report fd is ready for
a write().

This would break some applications using poll() and pfd.events = -1,
as they would not block in poll()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAlan Burlison <Alan.Burlison@oracle.com>
Tested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TO: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: Jon Maloy <jon.maloy@ericsson.com>
CC: Ying Xue <ying.xue@windriver.com>
CC: tipc-discussion@lists.sourceforge.net
CC: linux-kernel@vger.kernel.org
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jon Maloy says:

====================
tipc: improve broadcast implementation

The TIPC broadcast link implementation is currently complex and hard to
follow. It also incurs some amount of code and structure duplication,
something that can be reduced significantly with a little effort.

This commit series introduces a number of improvements which address
both the locking structure, the code/structure duplication issue, and
the overall readbility of the code.

The series consists of three main parts:

1-7: Adaptation to the new link structure, and preparation for the next
     step. In particular, we want the broadcast transmission link to
     have a life cycle that is longer than any of its potential (unicast
     and broadcast receive links) users. This eliminates the need to
     always test for the presence of this link before accessing it.

8-10: This is what is really new in this series. Commit #9 is by far
      the largest and most important one, because it moves most of
      the broadcast functionality into link.c, partially reusing the
      fields and functionality of the unicast link. The removal of
      the "node_map" infrastructure in commit #10 is also an important
      achievement.

11-16: Some improvements leveraging the changes made in the previous
       commits.

The series needs commit 53387c4e ("tipc: extend broadcast link window size")
and commit e5356794 ("tipc: conditionally expand buffer headroom over udp tunnel")
which are both present in 'net' but not yet in 'net-next', to apply cleanly.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the previous changes in this series, we can now remove some
unused code and structures, both in the broadcast, link aggregation
and link code.

There are no functional changes in this commit.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct synchronization of the broadcast link at first contact between
two nodes is dependent on the assumption that the binding table "bulk"
update passes via the same link as the initial broadcast syncronization
message, i.e., via the first link that is established.

This is not guaranteed in the current implementation. If two link
come up very close to each other in time, the "bulk" may quite well
pass via the second link, and hence void the guarantee of a correct
initial synchronization before the broadcast link is opened.

This commit makes two small changes to strengthen this guarantee.

1) We let the second established link occupy slot 1 of the
   "active_links" array, while the first link will retain slot 0.
   (This is in reality a cosmetic change, we could just as well keep
    the current, opposite order)

2) We let the name distributor always use link selector/slot 0 when
   it sends it binding table updates.

The extra traffic bias on the first link caused by this change should
be negligible, since binding table updates constitutes a very small
fraction of the total traffic.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the recent commit series, we have established a one-way dependency
between the link aggregation (struct tipc_node) instances and their
pertaining tipc_link instances. This has enabled quite significant code
and structure simplifications.

In this commit, we eliminate the field 'owner', which points to an
instance of struct tipc_node, from struct tipc_link, and replace it with
a pointer to struct net, which is the only external reference now needed
by a link instance.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since all packet transmitters (link, bcast, discovery) are now sending
consumable buffer clones to the bearer layer, we can remove the
redundant buffer cloning that is perfomed in the lower level functions
tipc_l2_send_msg() and tipc_udp_send_msg().
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The neighbor discovery function currently uses the function
tipc_bearer_send() for transmitting packets, assuming that the
sent buffers are not consumed by the called function.

We want to change this, in order to avoid unnecessary buffer cloning
elswhere in the code.

This commit introduces a new function tipc_bearer_skb() which consumes
the sent buffers, and let the discoverer functions use this new call
instead. The discoverer does now itself perform the cloning when
that is necessary.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, we have only been supporting a fix MTU size of 1500 bytes
for all broadcast media, irrespective of their actual capability.

We now make the broadcast MTU adaptable to the carrying media, i.e.,
we use the smallest MTU supported by any of the interfaces attached
to TIPC.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, we have been keeping track of the exact set of broadcast
destinations though the help structure tipc_node_map. This leads us to
have to maintain a whole infrastructure for supporting this, including
a pseudo-bearer and a number of functions to manipulate both the bearers
and the node map correctly. Apart from the complexity, this approach is
also limiting, as struct tipc_node_map only can support cluster local
broadcast if we want to avoid it becoming excessively large. We want to
eliminate this limitation, in order to enable introduction of scoped
multicast in the future.

A closer analysis reveals that it is unnecessary maintaining this "full
set" overview; it is sufficient to keep a counter per bearer, indicating
how many nodes can be reached via this bearer at the moment. The protocol
is now robust enough to handle transitional discrepancies between the
nominal number of reachable destinations, as expected by the broadcast
protocol itself, and the number which is actually reachable at the
moment. The initial broadcast synchronization, in conjunction with the
retransmission mechanism, ensures that all packets will eventually be
acknowledged by the correct set of destinations.

This commit introduces these changes.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code path for receiving broadcast packets is currently distinct
from the unicast path. This leads to unnecessary code and data
duplication, something that can be avoided with some effort.

We now introduce separate per-peer tipc_link instances for handling
broadcast packet reception. Each receive link keeps a pointer to the
common, single, broadcast link instance, and can hence handle release
and retransmission of send buffers as if they belonged to the own
instance.

Furthermore, we let each unicast link instance keep a reference to both
the pertaining broadcast receive link, and to the common send link.
This makes it possible for the unicast links to easily access data for
broadcast link synchronization, as well as for carrying acknowledges for
received broadcast packets.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, we have tried to support both the newer, dedicated broadcast
synchronization mechanism along with the older, less safe, RESET_MSG/
ACTIVATE_MSG based one. The latter method has turned out to be a hazard
in a highly dynamic cluster, so we find it safer to disable it completely
when we find that the former mechanism is supported by the peer node.

For this purpose, we now introduce a new capabability bit,
TIPC_BCAST_SYNCH, to inform any peer nodes that dedicated broadcast
syncronization is supported by the present node. The new bit is conveyed
between peers in the 'capabilities' field of neighbor discovery messages.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit simplifies the broadcast link transmission function, by
leveraging previous changes to the link transmission function and the
broadcast transmission link life cycle.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Realizing that unicast is just a special case of broadcast, we also see
that we can go in the other direction, i.e., that modest changes to the
current unicast link can make it generic enough to support broadcast.

The following changes are introduced here:

- A new counter ("ackers") in struct tipc_link, to indicate how many
  peers need to ack a packet before it can be released.
- A corresponding counter in the skb user area, to keep track of how
  many peers a are left to ack before a buffer can be released.
- A new counter ("acked"), to keep persistent track of how far a peer
  has acked at the moment, i.e., where in the transmission queue to
  start updating buffers when the next ack arrives. This is to avoid
  double acknowledgements from a peer, with inadvertent relase of
  packets as a result.
- A more generic tipc_link_retrans() function, where retransmit starts
  from a given sequence number, instead of the first packet in the
  transmision queue. This is to minimize the number of retransmitted
  packets on the broadcast media.

When the new functionality is taken into use in the next commits,
we expect it to have minimal effect on unicast mode performance.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The broadcast link instance (struct tipc_link) used for sending is
currently aggregated into struct tipc_bclink. This means that we cannot
use the regular tipc_link_create() function for initiating the link, but
do instead have to initiate numerous fields directly from the
bcast_init() function.

We want to reduce dependencies between the broadcast functionality
and the inner workings of tipc_link. In this commit, we introduce
a new function tipc_bclink_create() to link.c, and allocate the
instance of the link separately using this function.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In reality, the link implementation is already independent from
struct tipc_bearer, in that it doesn't store any reference to it.
However, we still pass on a pointer to a bearer instance in the
function tipc_link_create(), just to have it extract some
initialization information from it.

I later commits, we need to create instances of tipc_link without
having any associated struct tipc_bearer. To facilitate this, we
want to extract the initialization data already in the creator
function in node.c, before calling tipc_link_create(), and pass
this info on as individual parameters in the call.

This commit introduces this change.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The broadcast transmission link is currently instantiated when the
network subsystem is started, i.e., on order from user space via netlink.

This forces the broadcast transmission code to do unnecessary tests for
the existence of the transmission link, as well in single mode node as
in network mode.

In this commit, we do instead create the link during initialization of
the name space, and remove it when it is stopped. The fact that the
transmission link now has a guaranteed longer life cycle than any of its
potential clients paves the way for further code simplifcations
and optimizations.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The broadcast lock will need to be acquired outside bcast.c in a later
commit. For this reason, we move the lock to struct tipc_net. Consistent
with the changes in the previous commit, we also introducee two new
functions tipc_bcast_lock() and tipc_bcast_unlock(). The code that is
currently using tipc_bclink_lock()/unlock() will be phased out during
the coming commits in this series.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, a number of structure and function definitions related
to the broadcast functionality are unnecessarily exposed in the file
bcast.h. This obscures the fact that the external interface towards
the broadcast link in fact is very narrow, and causes unnecessary
recompilations of other files when anything changes in those
definitions.

In this commit, we move as many of those definitions as is currently
possible to the file bcast.c.

We also rename the structure 'tipc_bclink' to 'tipc_bc_base', both
since the name does not correctly describe the contents of this
struct, and will do so even less in the future, and because we want
to use the term 'link' more appropriately in the functionality
introduced later in this series.

Finally, we rename a couple of functions, such as tipc_bclink_xmit()
and others that will be kept in the future, to include the term 'bcast'
instead.

There are no functional changes in this commit.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	net/ipv6/xfrm6_output.c
	net/openvswitch/flow_netlink.c
	net/openvswitch/vport-gre.c
	net/openvswitch/vport-vxlan.c
	net/openvswitch/vport.c
	net/openvswitch/vport.h

The openvswitch conflicts were overlapping changes.  One was
the egress tunnel info fix in 'net' and the other was the
vport ->send() op simplification in 'net-next'.

The xfrm6_output.c conflicts was also a simplification
overlapping a bug fix.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-10-22

Here's probably the last bluetooth-next pull request for 4.4. Among
several other changes it contains the rest of the fixes & cleanups from
the Bluetooth UnplugFest (that didn't need to be hurried to 4.3).

 - Refactoring & cleanups to 6lowpan code
 - New USB ids for two Atheros controllers and BCM43142A0 from Broadcom
 - Fix (quirk) for broken Broadcom BCM2045 controllers
 - Support for latest Apple controllers
 - Improvements to the vendor diagnostic message support

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct bnxt_pf_info needs to be always defined.  Move bnxt_update_vf_mac()
to bnxt_sriov.c and add some missing #ifdef CONFIG_BNXT_SRIOV.
Reported-by: NJim Hull <jim.hull@hpe.com>
Tested-by: NJim Hull <jim.hull@hpe.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-10-23

This series contains updates to i40e, i40evf, if_link, ixgbe and ixgbevf.

Anjali adds a workaround to drop any flow control frames from being
transmitted from any VSI, so that a malicious VF cannot send flow control
or PFC packets out on the wire.  Also fixed a bug in debugfs by grabbing
the filter list lock before adding or deleting a filter.

Akeem fixes an issue where we were unconditionally returning VEB bridge
mode before allowing LB in the add VSI routine, resolve by checking if
the bridge is actually in VEB mode first.

Mitch fixed an issue where the incorrect structure was being used for
VLAN filter list, which meant the VLAN filter list did not get
processed correctly and VLAN filters would not be re-enabled after any
kind of reset.

Helin fixed a problem of possibly getting inconsistent flow control
status after a PF reset.  The issue was requested_mode was being set
with a default value during probe, but the hardware state could be a
different value from this mode.

Carolyn fixed a problem where the driver output of the OEM version
string varied from the other tools.

Jean Sacren fixes up kernel documentation by fixing function header
comments to match actual variables used in the functions.  Also
cleaned up variable initialization, when the variable would be
over-written immediately.

Hiroshi Shimanoto provides three patches to add "trusted" VF by adding
netlink directives and an NDO entry.  Then implement these new controls
in ixgbe and ixgbevf.  This series has gone through several iterations
to address all the suggested community changes and concerns.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Roopa Prabhu says:

====================
mpls: multipath support

This patch adds support for MPLS multipath routes.

Includes following changes to support multipath:
- splits struct mpls_route into 'struct mpls_route + struct mpls_nh'.

- struct mpls_nh represents a mpls nexthop label forwarding entry

- Adds support to parse/fill RTA_MULTIPATH netlink attribute for
multipath routes similar to ipv4/v6 fib

- In the process of restructuring, this patch also consistently changes all
labels to u8

$ip -f mpls route add 100 nexthop as 200 via inet 10.1.1.2 dev swp1 \
		nexthop as 700 via inet 10.1.1.6 dev swp2 \
		nexthop as 800 via inet 40.1.1.2 dev swp3

$ip  -f mpls route show
100
	nexthop as to 200 via inet 10.1.1.2  dev swp1
	nexthop as to 700 via inet 10.1.1.6  dev swp2
	nexthop as to 800 via inet 40.1.1.2  dev swp3
====================
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the selection of a multipath route to use a flow-based
hash. This more suitable for traffic sensitive to reordering within a
flow (e.g. TCP, L2VPN) and whilst still allowing a good distribution
of traffic given enough flows.

Selection of the path for a multipath route is done using a hash of:
1. Label stack up to MAX_MP_SELECT_LABELS labels or up to and
   including entropy label, whichever is first.
2. 3-tuple of (L3 src, L3 dst, proto) from IPv4/IPv6 header in MPLS
   payload, if present.

Naturally, a 5-tuple hash using L4 information in addition would be
possible and be better in some scenarios, but there is a tradeoff
between looking deeper into the packet to achieve good distribution,
and packet forwarding performance, and I have erred on the side of the
latter as the default.
Signed-off-by: NRobert Shearman <rshearma@brocade.com>
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for MPLS multipath routes.

Includes following changes to support multipath:
- splits struct mpls_route into 'struct mpls_route + struct mpls_nh'

- 'struct mpls_nh' represents a mpls nexthop label forwarding entry

- moves mpls route and nexthop structures into internal.h

- A mpls_route can point to multiple mpls_nh structs

- the nexthops are maintained as a array (similar to ipv4 fib)

- In the process of restructuring, this patch also consistently changes
  all labels to u8

- Adds support to parse/fill RTA_MULTIPATH netlink attribute for
multipath routes similar to ipv4/v6 fib

- In this patch, the multipath route nexthop selection algorithm
simply returns the first nexthop. It is replaced by a
hash based algorithm from Robert Shearman in the next patch

- mpls_route_update cleanup: remove 'dev' handling in mpls_route_update.
mpls_route_update though implemented to update based on dev, it was
never used that way. And the dev handling gets tricky with multiple
nexthops. Cannot match against any single nexthops dev. So, this patch
removes the unused 'dev' handling in mpls_route_update.

- dead route/path handling will be implemented in a subsequent patch

Example:

$ip -f mpls route add 100 nexthop as 200 via inet 10.1.1.2 dev swp1 \
                nexthop as 700 via inet 10.1.1.6 dev swp2 \
                nexthop as 800 via inet 40.1.1.2 dev swp3

$ip  -f mpls route show
100
        nexthop as to 200 via inet 10.1.1.2  dev swp1
        nexthop as to 700 via inet 10.1.1.6  dev swp2
        nexthop as to 800 via inet 40.1.1.2  dev swp3
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: NRobert Shearman <rshearma@brocade.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the returned buffer of register_sysctl() is stored into net_header
variable, but net_header is not used after, and compiler maybe
optimise the variable out, and lead kmemleak reported the below warning

	comm "swapper/0", pid 1, jiffies 4294937448 (age 267.270s)
	hex dump (first 32 bytes):
	90 38 8b 01 c0 ff ff ff 00 00 00 00 01 00 00 00 .8..............
	01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
	backtrace:
	[<ffffffc00020f134>] create_object+0x10c/0x2a0
	[<ffffffc00070ff44>] kmemleak_alloc+0x54/0xa0
	[<ffffffc0001fe378>] __kmalloc+0x1f8/0x4f8
	[<ffffffc00028e984>] __register_sysctl_table+0x64/0x5a0
	[<ffffffc00028eef0>] register_sysctl+0x30/0x40
	[<ffffffc00099c304>] net_sysctl_init+0x20/0x58
	[<ffffffc000994dd8>] sock_init+0x10/0xb0
	[<ffffffc0000842e0>] do_one_initcall+0x90/0x1b8
	[<ffffffc000966bac>] kernel_init_freeable+0x218/0x2f0
	[<ffffffc00070ed6c>] kernel_init+0x1c/0xe8
	[<ffffffc000083bfc>] ret_from_fork+0xc/0x50
	[<ffffffffffffffff>] 0xffffffffffffffff <<end check kmemleak>>

Before fix, the objdump result on ARM64:
0000000000000000 <net_sysctl_init>:
   0:   a9be7bfd        stp     x29, x30, [sp,#-32]!
   4:   90000001        adrp    x1, 0 <net_sysctl_init>
   8:   90000000        adrp    x0, 0 <net_sysctl_init>
   c:   910003fd        mov     x29, sp
  10:   91000021        add     x1, x1, #0x0
  14:   91000000        add     x0, x0, #0x0
  18:   a90153f3        stp     x19, x20, [sp,#16]
  1c:   12800174        mov     w20, #0xfffffff4                // #-12
  20:   94000000        bl      0 <register_sysctl>
  24:   b4000120        cbz     x0, 48 <net_sysctl_init+0x48>
  28:   90000013        adrp    x19, 0 <net_sysctl_init>
  2c:   91000273        add     x19, x19, #0x0
  30:   9101a260        add     x0, x19, #0x68
  34:   94000000        bl      0 <register_pernet_subsys>
  38:   2a0003f4        mov     w20, w0
  3c:   35000060        cbnz    w0, 48 <net_sysctl_init+0x48>
  40:   aa1303e0        mov     x0, x19
  44:   94000000        bl      0 <register_sysctl_root>
  48:   2a1403e0        mov     w0, w20
  4c:   a94153f3        ldp     x19, x20, [sp,#16]
  50:   a8c27bfd        ldp     x29, x30, [sp],#32
  54:   d65f03c0        ret
After:
0000000000000000 <net_sysctl_init>:
   0:   a9bd7bfd        stp     x29, x30, [sp,#-48]!
   4:   90000000        adrp    x0, 0 <net_sysctl_init>
   8:   910003fd        mov     x29, sp
   c:   a90153f3        stp     x19, x20, [sp,#16]
  10:   90000013        adrp    x19, 0 <net_sysctl_init>
  14:   91000000        add     x0, x0, #0x0
  18:   91000273        add     x19, x19, #0x0
  1c:   f90013f5        str     x21, [sp,#32]
  20:   aa1303e1        mov     x1, x19
  24:   12800175        mov     w21, #0xfffffff4                // #-12
  28:   94000000        bl      0 <register_sysctl>
  2c:   f9002260        str     x0, [x19,#64]
  30:   b40001a0        cbz     x0, 64 <net_sysctl_init+0x64>
  34:   90000014        adrp    x20, 0 <net_sysctl_init>
  38:   91000294        add     x20, x20, #0x0
  3c:   9101a280        add     x0, x20, #0x68
  40:   94000000        bl      0 <register_pernet_subsys>
  44:   2a0003f5        mov     w21, w0
  48:   35000080        cbnz    w0, 58 <net_sysctl_init+0x58>
  4c:   aa1403e0        mov     x0, x20
  50:   94000000        bl      0 <register_sysctl_root>
  54:   14000004        b       64 <net_sysctl_init+0x64>
  58:   f9402260        ldr     x0, [x19,#64]
  5c:   94000000        bl      0 <unregister_sysctl_table>
  60:   f900227f        str     xzr, [x19,#64]
  64:   2a1503e0        mov     w0, w21
  68:   f94013f5        ldr     x21, [sp,#32]
  6c:   a94153f3        ldp     x19, x20, [sp,#16]
  70:   a8c37bfd        ldp     x29, x30, [sp],#48
  74:   d65f03c0        ret

Add the possible error handle to free the net_header to remove the
kmemleak warning
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Neil Armstrong says:

====================
Refactor nested mdiobus read/write functions

In order to avoid locked signal false positive for nested mdiobus
read/write calls, nested code was introduced in mv88e6xxx and
mdio-mux.
But mv88e6060 also needs such nested mdiobus read/write calls.
For sake of refactoring, introduce nested variants of mdiobus read/write
and make them used by mv88e6xxx and mv88e6060.
In a next patch, mdio-mux should also use these variant calls.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like mv88e6xxx and mdio-mux, to avoid lockdep give false positives
because of nested MDIO busses, switch to previously introduced
nested mdiobus_read/write variants.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the mv88e6xxx driver use the previously introduced nested
variants of mdiobus_read/write functions.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>