The iSeries HV only needs the first two fields of the paca statically
initialised, so create an alternate paca that contains only those and
switch to our real paca immediately after boot.

This is in order to make the 1024 cpu patches easier since they will no
longer have to statically initialise the pacas for iSeries.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The prpmc2800 platform requires a zImage formatted file with an
embedded dtb file.  Rename the requested boot image file to
dtbImage.prpmc2800.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Acked-by: NMark A. Greer <mgreer@mvista.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add the device tree bindings for the Marvell mv64x60 series of
system controller chips in booting-without-of.text.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Acked-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The mv643xx_eth driver is being modified to support multiple instances
of the ethernet silicon block on the same platform.  Each block contains
a single register bank containing the registers for up to three ports
interleaved within that bank.  This patch updates the PowerPC OF to
platform_device glue code to support multiple silicon blocks, each
with up to three ethernet ports.  The main difference is that we now
allow multiple mv64x60_shared platform_devices to be registered and
we provide each port platform_device with a pointer to its associated
shared platform_device.  The pointer will not be used until the
mv643xx_eth driver changes are committed.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Acked-by: NMark Greer <mgreer@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove several unused (or software config only) properties.
Rename marvel node to "system-controller".  Also, rename the
"block-index" property to "cell-index" to conform to current
practice.
Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Replace several device node absolute path lookups in the mv64x60
bootwrapper code with lookups by compatible or device_type
properties.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Acked-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Compatible names should refer to a specific version of the hardware,
without wildcards.  Change each instance of mv64x60 to mv64360, which
is the oldest version we currently support.
Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

After the conversion to dts v1 format, seeing the frequencies
in decimal made it obvious that some of them had been
incorrectly truncated.  This fixes them.  Note that the PCI
frequency comes from a different source and is documented
as 66MHz, so it was left at 66000000.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Acked-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Update the prpmc2800 DTS file to version 1 and add labels.
I verified that there was no change in the resulting dtb file.
Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The allyesconfig (among others) build was giving this:

In file included from include/linux/gfp.h:4,
                 from include/linux/slab.h:14,
                 from include/linux/percpu.h:5,
                 from include2/asm/time.h:18,
                 from include2/asm/cputime.h:26,
                 from include/linux/sched.h:67,
                 from
arch/powerpc/kernel/asm-offsets.c:17:
include/linux/mmzone.h:791:2: error: #error Allocator MAX_ORDER exceeds SECTION_SIZE

Kconfig options are order depenendent, so move the setting of
FORCE_MAX_ZONEORDER to after the setting of PPC_64K_PAGES. Also add an
explicit !PPC_64K_PAGES.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

If an SLB miss interrupt happens while the RI bit of MSR is zero, we
can't just return, because RI being zero indicates that SRR0/SRR1
potentially had live values in them, and the process of taking an
interrupt overwrites them.

This should never happen, but if it does, we try to print a nice oops
message.  That doesn't work, however, because the code at unrecov_slb
assumes that the MMU has been turned on, but we call it with the MMU
off (and have done so since the SLB miss handler was rewritten to run
without turning the MMU on) -- except on iSeries, where everything runs
with the MMU on.

This fixes it by adding the necessary code to turn the MMU on if
necessary.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* 'docs' of git://git.lwn.net/linux-2.6:
  Add additional examples in Documentation/spinlocks.txt
  Move sched-rt-group.txt to scheduler/
  Documentation: move rpc-cache.txt to filesystems/
  Documentation: move nfsroot.txt to filesystems/
  Spell out behavior of atomic_dec_and_lock() in kerneldoc
  Fix a typo in highres.txt
  Fixes to the seq_file document
  Fill out information on patch tags in SubmittingPatches
  Add the seq_file documentation

Checkpatch will throw an error if code doesn't use the correct initializers
for static spinlocks:

ERROR: Use of SPIN_LOCK_UNLOCKED is deprecated: see Documentation/spinlocks.txt

This is fine, but Documentation/spinlocks.txt isn't very clear on how to
_use_ the new initializers for static variables. To save people time in the
future, I added two small examples of how to fix old-style static
initializers to be more lockdep friendly.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This file is nfs-related.  (Maybe Documentation/filesystems/ would
benefit from a separate nfs/ directory at some point.)
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Documentation/ is a little large, and filesystems/ seems an obvious
place for this file.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

A little more detail here wouldn't hurt.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

git commit 54a01510 ("asmlinkage_protect
replaces prevent_tail_call") causes this build failure on s390:

    AS      arch/s390/kernel/entry64.o
  In file included from arch/s390/kernel/entry64.S:14:
  include/linux/linkage.h:34: error: syntax error in macro parameter list
  make[1]: *** [arch/s390/kernel/entry64.o] Error 1
  make: *** [arch/s390/kernel] Error 2

and some other architectures.  The reason is that some architectures add
the "-traditional" flag to the invocation of $(AS), which disables
variadic macro argument support.

So just surround the new define with an #ifndef __ASSEMBLY__ to prevent
any side effects on asm code.

Cc: Roland McGrath <roland@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c-tiny-usb: New VID/PID pair
  i2c-davinci: Fix lost interrupt
  i2c-ibm_iic: Fast mode parm desc fixup

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETNS][IPV6] tcp - assign the netns for timewait sockets
  [IPV4]: Fix byte value boundary check in do_ip_getsockopt().
  BNX2X: Correct bringing chip out of reset
  [NETFILTER]: nf_nat: autoload IPv4 connection tracking
  [NETFILTER]: xt_hashlimit: fix mask calculation
  [XFRM]: xfrm_user: fix selector family initialization
  rt61pci: rt61pci_beacon_update do not free skb twice
  ssb-mipscore: Fix interrupt vectors
  ssb-pcicore: Fix IRQ TPS flag handling
  mac80211: use short_preamble mode from capability if ERP IE not present
  [NET]: Undo code bloat in hot paths due to print_mac().
  [TCP]: Don't allow FRTO to take place while MTU is being probed
  [TCP]: tcp_simple_retransmit can cause S+L
  [TCP]: Fix NewReno's fast rexmit/recovery problems with GSOed skb
  [TCP]: Restore 2.6.24 mark_head_lost behavior for newreno/fack
  nl80211: fix STA AID bug
  b43legacy: fix bcm4303 crash
  iwlwifi: fix n-band association problem
  ipw2200: set MAC address on radiotap interface
  libertas: fix mode initialization problem

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC]: Fix several regset and ptrace bugs.

Michael Kerrisk found out that signalfd was not reporting back user data
pushed using sigqueue:

  http://groups.google.com/group/linux.kernel/msg/9397cab8551e3123

The following patch makes signalfd report back the ssi_ptr and ssi_int members
of the signalfd_siginfo structure.
Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
Acked-by: NMichael Kerrisk <mtk.manpages@googlemail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Increase the PNP "number of devices" limit.  We currently use an unsigned
char, which limits us to 256 devices per protocol.  This patch changes that to
an unsigned int.

Not all backends can take advantage of this: we limit ISAPNP to 10 devices in
isapnp_cfg_begin(), and PNPBIOS is limited to 256 devices because the BIOS
interfaces use a one-byte device node number.

But there is no limit on the number of PNPACPI devices we may have.  Large HP
Integrity machines have more than 256, which causes the current "unsigned char
number" to wrap around.  This causes errors like this:

    pnp: PnP ACPI init
    kobject_add failed for 00:00 with -EEXIST, don't try to register things with the same name in the same directory.

    Call Trace:
     [<a000000100010720>] show_stack+0x40/0xa0
     [<a0000001000107b0>] dump_stack+0x30/0x60
     [<a0000001001dbdf0>] kobject_add+0x290/0x2c0
     [<a0000001002bfd40>] device_add+0x160/0x860
     [<a0000001002c0470>] device_register+0x30/0x60
     [<a00000010026ba70>] __pnp_add_device+0x130/0x180
     [<a00000010026bb70>] pnp_add_device+0xb0/0xe0
     [<a0000001007f2730>] pnpacpi_add_device+0x510/0x5a0
     [<a0000001007f2810>] pnpacpi_add_device_handler+0x50/0x80

This patch increases the limit to fix this PNPACPI problem.  It should not
have any adverse effect on ISAPNP or PNPBIOS because their limits are still
enforced in the backends.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a failure is detected after a parity check operation has been initiated,
but before it completes handle_parity_checks5 will never quiesce operations on
the stripe.

Explicitly handle this case by "canceling" the parity check, i.e.  clear the
STRIPE_OP_CHECK flags and queue the stripe on the handle list again to refresh
any non-uptodate blocks.

Kernel versions >= 2.6.23 are susceptible.

Cc: <stable@kernel.org>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the missing include directive <linux/scatterlist.h> to the
cciss.c source file.    This was discovered by our release team when building
the kernel for the Alpha architecture.

Errors were found as references to functions 'sg_init_table' and 'sg_page' do
not exist without the include for Alpha.
Signed-off-by: NMike Pagano <mpagano@gentoo.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: <mike.miller@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since 43cc71ee, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable RTC
platform drivers, to re-enable module auto loading.

[dbrownell@users.sourceforge.net: more drivers, minor fix]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since 43cc71ee, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable watchdog
drivers, to re-enable auto loading.

[dbrownell@users.sourceforge.net: more drivers; registration fixes]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since 43cc71ee, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable USB HCDs,
to allow re-enable auto loading.

[dbrownell@users.sourceforge.net: more drivers; registration fixes]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since 43cc71ee, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable usb
peripheral drivers, to re-eable module auto loading.

[dbrownell@users.sourceforge.net: registration fixes]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since 43cc71ee, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable SPI
platform drivers, to allow module auto loading.

[dbrownell@users.sourceforge.net: more drivers: registration fixes]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jeff Roberson discovered a race when using kaio eventfd based notifications.
When it occurs it can lead tomissed wakeups and hung userspace.

This patch fixes the race by moving the notification inside the spinlocked
section of kaio.  The operation is safe since eventfd spinlock and kaio one
are unrelated.
Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jeff Roberson <jroberson@chesapeake.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

rtc-s35390a uses BITREVERSE functions so it needs to select that config symbol
to ensure that the functions are built.

  drivers/built-in.o: In function `s35390a_set_datetime':
  linux-2.6.25-rc8-git7/drivers/rtc/rtc-s35390a.c:144: undefined reference to `byte_rev_table'
  drivers/built-in.o: In function `s35390a_get_datetime':
  linux-2.6.25-rc8-git7/drivers/rtc/rtc-s35390a.c:163: undefined reference to `byte_rev_table'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Extend the /proc/<pid>/cgroup file to include the appropriate hierarchy ID on
each line.

Currently this ID isn't really needed since a hierarchy can be completely
identified by the set of subsystems bound to it, but this is likely to change
in the near future in order to support stateless subsystems and
merging/rebinding of subsystems.  Getting this change into 2.6.25 reduces the
need for an API change later.
Signed-off-by: NPaul Menage <menage@google.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I have recently bought some USB PIDs from EZPrototypes for my USB projects
and one will be for the i2c-tiny-usb. I have not yet started to use the new 
one in the official i2c-tiny-usb firmware since i think it makes sense to get 
the change into the kernel before releasing a modified firmware.

This patch adds support for the EZPrototypes USB vid/pid pair used in later
i2c-tiny-usb firmware versions (avrusb v1.06 and up, usbtiny v2.06 and up).
Signed-off-by: NTill Harbaum <Till@Harbaum.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

DAVINCI_I2C_STR_REG is a write 1 to clear register,
so don't use a read/modify/write cycle.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Acked-by: NDirk Behme <dirk.behme@gmail.com>
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Noticed this when grepping for fast mode module params, the i2c-ibm_iic
driver was using a non-existent variable for MODULE_PARM_DESC. Fix it up
to reflect what it's actually supposed to be describing.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Copy the network namespace from the socket to the timewait socket.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's really a pretty ugly thing to need, and some day it will hopefully
be obviated by teaching gcc about the magic calling conventions for the
low-level system call code, but in the meantime we can at least add big
honking comments about why we need these insane and strange macros.

I took my comments from my version of the macro, but I ended up deciding
to just pick Roland's version of the actual code instead (with his
prettier syntax that uses vararg macros).  Thus the previous two commits
that actually implement it.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>