- 19 2月, 2008 1 次提交
-
-
由 Mark M. Hoffman 提交于
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 08 2月, 2008 3 次提交
-
-
由 Jean Delvare 提交于
* Drop unused defines * Drop unused driver ID * Remove trailing whitespace Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
The W83627HF hardware monitoring features are supported by the w83627hf driver for several years now. Support by the w83781d has been advertised as deprecated 6 months ago, it's about time to see it go. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
We've never seen any device supported by the lm78 or w83781d driver at addresses 0x20-0x27, so let's stop probing these addresses. Extra probes cost time, and have potential for confusing or misdetecting other I2C devices. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 08 11月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
Missing curly braces cause an if statement to be evaluated when it shouldn't. It happens to be harmless, but that's still worth fixing. Thanks to Riku Voipio for reporting. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-By: NRiku Voipio <riku.voipio@movial.fi> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 10 10月, 2007 5 次提交
-
-
由 Jean Delvare 提交于
The upcoming libsensors 3 needs these individual alarm and beep files. For the W83781D, this is quirky because this chip has a single alarm bit for both temp2 and temp3. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
The VRM value is not read from chip registers, so there's no need to update the device data cache before exporting the VRM value to user-space. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Tony Jones 提交于
Convert from class_device to device for hwmon_device_register/unregister Signed-off-by: NTony Jones <tonyj@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
Deprecate the use of thermistor beta values as thermal sensor types. No driver supports changing the beta value anyway. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Christian Hohnstaedt 提交于
- replace differing temperature variable types by long - use strtol() instead of strtoul() for conversion Signed-off-by: NChristian Hohnstaedt <chohnstaedt@innominate.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 09 9月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
Fix an off-by-one error in the I/O region declaration of two hardware monitoring drivers (lm78 and w83781d.) We were requesting one extra port at the end of the region. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 12 8月, 2007 1 次提交
-
-
由 Mark M. Hoffman 提交于
Commit 34875337 introduced a regression that caused temp2 and temp3 sensor type settings to be written to temp1 instead. The result is that temp sensor readings could be way off. Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 08 5月, 2007 5 次提交
-
-
由 Jean Delvare 提交于
The W83627HF is better supported by the w83627hf driver. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
This lets us get rid of some of the macro-generated functions and shrinks the driver size significantly (about 9%). Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Use the driver data structure as the main device reference, instead of the i2c client. It makes the driver a bit smaller, and makes more sense as this is an hybrid driver, supporting both I2C and ISA devices. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
* Fix voltage rounding * Drop useless macros * Drop useless casts * Turn macros evaluating their parameters more than once into inline functions * Use signed variables for temperatures Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Reimplement the ISA device support as a platform driver, so that we no longer rely on i2c-isa. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 15 2月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
Cleanup a bogus legacy comment that has been replicated to many hardware monitoring drivers. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 19 10月, 2006 2 次提交
-
-
由 Jean Delvare 提交于
Fix debug messages in w83781d at detection time. We can't use dev_dbg() on an i2c client's device before calling i2c_attach_client() on that client. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Let the w83781d and lm78 hardware monitoring drivers load even when no chip was detected at the ISA address. There can still be supported chips connected to an I2C bus or SMBus. This fixes bug #7293. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 29 9月, 2006 1 次提交
-
-
由 Jim Cromie 提交于
w83781d: Fix unchecked return status Add 2 attr-file groups (for base and model-specific attrs respectively), create the base group with single call to sysfs_create_group, check the return code on individual calls to device_create_file for each of the model-specific attr-files. Signed-off-by: NJim Cromie <jim.cromie@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 9月, 2006 1 次提交
-
-
由 Jean Delvare 提交于
i2c-isa: Restore driver owner Commit 2b48716d back in January 2006 was a bit overzealous. It removed .owner from all i2c drivers, including i2c-isa ones, while they still need it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 6月, 2006 1 次提交
-
-
由 Andreas Mohr 提交于
acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 24 3月, 2006 3 次提交
-
-
由 Darren Jenkins 提交于
"register" is a reserved keyword so using it as a parameter name can confuse some compilers, most notably ICC. The patch below just renames all occurences to reg which fits the actual function declarations. Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Stop resetting the chip on load by default, so as to preserve the BIOS initializations. Same was done in the w83627hf driver some times ago for the same reasons. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ingo Molnar 提交于
convert drivers/hwmon/*.c semaphore use to mutexes. the conversion was generated via scripts, and the result was validated automatically via a script as well. all affected hwmon drivers were build-tested. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 14 2月, 2006 1 次提交
-
-
由 Jean Delvare 提交于
Use the real-time status registers of the Winbond W83782D, W83783S and W83627HF chips, instead of the interrupt status registers. Interrupts cannot be trusted at least for voltage inputs, as they are two-times triggers (as opposed to comparator mode, which we want.) The w83627hf driver was fixed in a similar way some times ago. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 1月, 2006 3 次提交
-
-
由 Greg Kroah-Hartman 提交于
Now that i2c_add_driver() doesn't need the module owner to be set by hand, we can delete it from the drivers. This patch catches all of the drivers that I found in the current tree (if a driver sets the .owner by hand, it's not a problem, just not needed.) Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Cc: Jean Delvare <khali@linux-fr.org>
-
由 Laurent Riffard 提交于
We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the hwmon drivers. Signed-off-by: NLaurent Riffard <laurent.riffard@free.fr> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we can simply make it the default and drop the flag. If any driver really doesn't want to be notified when i2c adapters are added, that driver can simply omit to set .attach_adapter. This approach is also more robust as it prevents accidental NULL pointer dereferences. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 07 11月, 2005 1 次提交
-
-
由 Jesper Juhl 提交于
This is the remaining misc drivers/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in misc files in drivers/. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Acked-by: NAristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Acked-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NPierre Ossman <drzeus@drzeus.cx> Acked-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-by: NLen Brown <len.brown@intel.com> Acked-by: N"Antonino A. Daplas" <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 10月, 2005 2 次提交
-
-
由 Deepak Saxena 提交于
Use kzalloc instead of kmalloc+memset in all hardware monitoring drivers. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Discard a common out-of-date comment in 5 hardware monitoring drivers. The hardware monitoring chip drivers are no more setting sensor limits at initialization time, for quite some time already. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/lm78.c | 1 - drivers/hwmon/via686a.c | 1 - drivers/hwmon/w83627hf.c | 1 - drivers/hwmon/w83781d.c | 1 - drivers/hwmon/w83792d.c | 1 - 5 files changed, 5 deletions(-)
-
- 06 9月, 2005 7 次提交
-
-
由 Jean Delvare 提交于
The only part left in i2c-sensor is the VRM/VRD/VID handling code. This is in no way related to i2c, so it doesn't belong there. Move the code to hwmon, where it belongs. Note that not all hardware monitoring drivers do VRM/VRD/VID operations, so less drivers depend on hwmon-vid than there were depending on i2c-sensor. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
The only thing left in i2c-sensor.h are module parameter definition macros. It's only an extension of what i2c.h offers, and this extension is not sensors-specific. As a matter of fact, a few non-sensors drivers use them. So we better merge them in i2c.h, and get rid of i2c-sensor.h altogether. Signed-off-by: NJean Delvare <khali@linux-fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
i2c_probe and i2c_detect now do the exact same thing and operate on the same data structure, so we can have everyone call i2c_probe. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
We could refactor the error message 34 different i2c drivers print if i2c_detach_client() fails in this function itself. Saves quite a few lines of code. Documentation is updated to reflect that change. Note that this patch should be applied after Rudolf Marek's w83792d patches. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Kill normal_isa in header files, documentation and all chip drivers, as it is no more used. normal_i2c could be renamed to normal, but I decided not to do so at the moment, so as to limit the number of changes. This might be done later as part of the i2c_probe/i2c_detect merge. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Call the ISA chip drivers detection function directly instead of relying on i2c_detect. The net effect is that address lists won't be handled anymore, but they were mostly useless in the ISA case anyway (pc87360, smsc47m1, smsc47b397 had already dropped them). We don't need to handle multiple devices, all we may need is a way to force a given address instead of the original one (some drivers already do: sis5595, via686a, w83627hf), and, for drivers supporting multiple chips, a way to force one given kind. All this may be added later on demand, but I actually don't think there will be much demand. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Convert the 10 ISA hardware monitoring drivers (it87, lm78, pc87360, sis5595, smsc47b397, smsc47m1, via686a, w83627hf, w83627ehf, w83781d) to explicitely register with i2c-isa. For hybrid drivers (it87, lm78, w83781d), we now have two separate instances of i2c_driver, one for the I2C interface of the chip, and one for ISA interface. In the long run, the one for ISA will be replaced with a different driver type. At this point, all drivers are working again, except for missing dependencies in Kconfig. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-