- 03 12月, 2013 4 次提交
-
-
由 Rajendra Nayak 提交于
Commit 'cd8abed1' "ARM: OMAP2+: Powerdomain: Remove the need to always have a voltdm associated to a pwrdm" leads to the following Smatch complaint: arch/arm/mach-omap2/powerdomain.c:131 _pwrdm_register() error: we previously assumed 'arch_pwrdm' could be null (see line 105) So, fix the unchecked dereference of arch_pwrdm. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NNishanth Menon <nm@ti.com> Signed-off-by: NRajendra Nayak <rnayak@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Jarkko Nikula 提交于
This adds typical McBSP2-TWL4030 audio description to the legacy Beagle Board. Signed-off-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Balaji T K 提交于
Mux mode for wlan/sdmmc5 should be MODE0 in pinmux_wl12xx_pins and Enable Pull up on sdmmc5_clk to detect SDIO card. This fixes WLAN on omap4-sdp that got broken in v3.10 when we moved omap4 to boot using device tree only as I did not have the WL12XX card in my omap4 SDP to test with. The commit that attempted to make WL12XX working on omap4 SDP was 775d2418 (ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze). Signed-off-by: NBalaji T K <balajitk@ti.com> [tony@atomide.com: updated comments for the regression] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Balaji T K 提交于
pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core. Fix the following error message: pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x SDIO card is not detected after moving pin mux to omap4_pmx_core since sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card. This fixes a regression where WLAN did not work after a warm reset or after one up/down cycle that happened when we move omap4 to boot using device tree only. For reference, the kernel bug is described at: https://bugzilla.kernel.org/show_bug.cgi?id=63821 Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: NBalaji T K <balajitk@ti.com> [tony@atomide.com: update comments to describe the regression] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 27 11月, 2013 15 次提交
-
-
由 Tony Lindgren 提交于
Some features can be configured by the companion I2C chips, which may not be available at the probe time. Fix the issue by returning -EPROBE_DEFER when the MMC controller slots are not configured. While at it, let's also add minimal device tree support so omap24xx platforms can use this driver without legacy mode since we claim to support device tree for mach-omap2 based systems. Although adding the minimal device tree support is not strictly a fix, it does remove one of the last blockers for dropping a bunch of legacy platform data for mach-omap2. Cc: linux-mmc@vger.kernel.org Acked-by: NChris Ball <cjb@laptop.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
We are wrongly relying on device id for the DMA configuration which can lead to wrong DMA channel being selected. Fix the issue by using the standard resources like we should. Cc: linux-mmc@vger.kernel.org Acked-by: NChris Ball <cjb@laptop.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Roger Quadros 提交于
Beagle (rev. C4) and Beagle-XM (all revs) need VAUX2 1.8V supply for the USB PHY. As the generic PHY driver can't handle more than one supply at the moment, we configure this supply to be always on. This will cause a very small power impact if the USB host subsystem is not in use, about 76.86 micro-W + LDO power. Older Beagle boards (prior to C4) don't have VAUX2 connected anywhere, so there won't be any functional impact on those boards other than some additional LDO power consumption. Reported-by: NNishanth Menon <nm@ti.com> Tested-by: NNishanth Menon <nm@ti.com> Signed-off-by: NRoger Quadros <rogerq@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Javier Martinez Canillas 提交于
On Device Tree boot the VDDS_DSI regulator is not linked to the DPI device so omapfb driver probing fails with: [ 3.186035] OMAPFB: omapfb_probe [ 3.190704] omapdss DPI error: can't get VDDS_DSI regulator [ 3.196594] omapfb omapfb: failed to connect default display [ 3.202667] omapfb omapfb: failed to init overlay connections [ 3.208892] OMAPFB: free_resources [ 3.212493] OMAPFB: free all fbmem [ 3.216735] omapfb omapfb: failed to setup omapfb As a workaround name the VPLL2 regulator from twl4030 as vdds_dsi so getting the VDDS_DSI regulator will succeed on dpi_init_regulator(). Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Enric Balletbo i Serra 提交于
Add node to support the USB Host and the USB OTG on the IGEP AQUILA Processor Board. Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Enric Balletbo i Serra 提交于
The IGEP AQUILA EXPANSION has a 32KBit EEPROM for user data storage. Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Enric Balletbo i Serra 提交于
Enable the user leds on the IGEP AQUILA EXPANSION. The has two leds, one green and one red, that are controllable by software. Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Enric Balletbo i Serra 提交于
Enable the hdmi output and the LCD Controller on IGEP AQUILA. Also configure the correct pinmux for output of video data from the SoC to the HDMI encoder. Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Javier Martinez Canillas 提交于
The IGEPv2 has a TFP410 DPI-to-DVI encoder attached to OMAP's Display SubSystem (DSS). Add mux setup for DSS pins and also for the GPIO 170 pin that is used to ensure that the DVI-D is powered down on power up. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Javier Martinez Canillas 提交于
Add pin muxing support for IGEP boards i2c controllers. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Enric Balletbo i Serra 提交于
Most of the boards are using the TI AM/DM37x processor, there is only a small quantity of IGEP Processor Boards based on TI OMAP3530. So it's better use the omap36xx.dtsi include instead of omap34xx.dtsi include. We can add support for the 34xx based variant later on as needed. To avoid confusion we have added to the model the (TI AM/DM37x) comment. Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com> [tony@atomide.com: updated comments for the 34xx to 36xx include change] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Enric Balletbo i Serra 提交于
The LBEE1USJYC is a WiFi/BT combo module used on OMAP3-based IGEP boards. In both cases, IGEPv2 Rev. C and IGEP COM MODULE, the module is connected using the same MMC interface and uses the same GPIOs. Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Enric Balletbo i Serra 提交于
Both, IGEPv2 and IGEP COM MODULE have a bus-width of 4 not 8, so fix this and do not mux data pins from mmc1_data4 to mmc1_data7. Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Javier Martinez Canillas 提交于
IGEP's DVI connector's DDC pins are connected to OMAP's third i2c bus. When booting with Device Trees the requested bus number is set to -1 which means that the bus number should be dynamically assigned. So the third i2c bus has 2 has a bus number. Since now only DT booting is supported for IGEP boards after commit 06ff74fd ("ARM: OMAP2+: remove legacy support for IGEP boards"), the i2c bus number has to be changed. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Joel Fernandes 提交于
Enabling of Posted mode is seen to cause problems on dmtimer modules on AM33xx (much like other OMAPs). Reference discussions on forums [1] [2]. Earlier patch solving this on other OMAPs [3]. For OMAP SoCs with this errata, the fix has been to not enable Posted mode. However, on some SoCs (atleast AM33xx) which carry this errata, Posted mode is enabled on reset. So we not only need to ignore enabling of the POSTED bit when the timer is requested, but also disable Posted mode if errata is present. [1] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/285744.aspx [2] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/270632.aspx [3] http://www.spinics.net/lists/linux-omap/msg81770.html Cc: stable@vgerk.kernel.org Reported-by: NRuss Dill <russ.dill@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NJoel Fernandes <joelf@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 26 11月, 2013 3 次提交
-
-
由 Tony Lindgren 提交于
Looks like we need to configure the regulators and use the pdata quirk to make eMMC work with device tree. It seems that mostly vaux3 is used, and only some earlier revisions used vmmc2. This has been tested to work on devices where the system_rev passed by the bootloader has versions 0x0010, 0x2101 and 0x2204. Cc: devicetree@vger.kernel.org Cc: Pavel Machek <pavel@ucw.cz> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NSebastian Reichel <sre@debian.org> [tony@atomide.com: updated with pinctrl changes and comments from Sebastian] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
We do not have REGULATOR_FIXED selected if no boards are selected and we boot with device tree. This can cause various devices to fail. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
After dropping the duplicate data in hwmod that now should come from the .dts files, I noticed few more entries missing. Let's add these as otherwise devices relying on these won't work. Looks like the side tone entries are bundled into the mcbsp1 to 3, so that may needs some special handling in the hwmod code as it's currently trying to look up mcbsp2_sidetone and mcbsp3_sidetone entries. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 23 11月, 2013 17 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull minor eCryptfs fix from Tyler Hicks: "Quiet static checkers by removing unneeded conditionals" * tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: file->private_data is always valid
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull second set of sound fixes from Takashi Iwai: "A collection of small fixes in HD-audio quirks and runtime PM, ASoC rcar, abs8500 and other codecs. Most of commits are for stable kernels, too" * tag 'sound-fix2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Set current_headset_type to ALC_HEADSET_TYPE_ENUM (janitorial) ALSA: hda - Provide missing pin configs for VAIO with ALC260 ALSA: hda - Add headset quirk for Dell Inspiron 3135 ALSA: hda - Fix the headphone jack detection on Sony VAIO TX ALSA: hda - Fix missing bass speaker on ASUS N550 ALSA: hda - Fix unbalanced runtime PM notification at resume ASoC: arizona: Set FLL to free-run before disabling ALSA: hda - A casual Dell Headset quirk ASoC: rcar: fixup dma_async_issue_pending() timing ASoC: rcar: off by one in rsnd_scu_set_route() ASoC: wm5110: Add post SYSCLK register patch for rev D chip ASoC: ab8500: Revert to using custom I/O functions ALSA: hda - Also enable mute/micmute LED control for "Lenovo dock" fixup ALSA: firewire-lib: include sound/asound.h to refer to snd_pcm_format_t ALSA: hda - Select FW_LOADER from CONFIG_SND_HDA_CODEC_CA0132_DSP ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Realtek codec ASoC: rcar: fixup mod access before checking
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull DRM fixes from Dave Airlie: "I was going to leave this until post -rc1 but sysfs fixes broke hotplug in userspace, so I had to fix it harder, otherwise a set of pulls from intel, radeon and vmware, The vmware/ttm changes are bit larger but since its early and they are unlikely to break anything else I put them in, it lets vmware work with dri3" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (36 commits) drm/sysfs: fix hotplug regression since lifetime changes drm/exynos: g2d: fix memory leak to userptr drm/i915: Fix gen3 self-refresh watermarks drm/ttm: Remove set_need_resched from the ttm fault handler drm/ttm: Don't move non-existing data drm/radeon: hook up backlight functions for CI and KV family. drm/i915: Replicate BIOS eDP bpp clamping hack for hsw drm/i915: Do not enable package C8 on unsupported hardware drm/i915: Hold pc8 lock around toggling pc8.gpu_idle drm/i915: encoder->get_config is no longer optional drm/i915/tv: add ->get_config callback drm/radeon/cik: Add macrotile mode array query drm/radeon/cik: Return backend map information to userspace drm/vmwgfx: Make vmwgfx dma buffers prime aware drm/vmwgfx: Make surfaces prime-aware drm/vmwgfx: Hook up the prime ioctls drm/ttm: Add a minimal prime implementation for ttm base objects drm/vmwgfx: Fix false lockdep warning drm/ttm: Allow execbuf util reserves without ticket drm/i915: restore the early forcewake cleanup ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI updates from Bjorn Helgaas: "Miscellaneous - Remove duplicate disable from pcie_portdrv_remove() (Yinghai Lu) - Fix whitespace, capitalization, and spelling errors (Bjorn Helgaas)" * tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove() PCI: Fix whitespace, capitalization, and spelling errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target updates from Nicholas Bellinger: "Things have been quiet this round with mostly bugfixes, percpu conversions, and other minor iscsi-target conformance testing changes. The highlights include: - Add demo_mode_discovery attribute for iscsi-target (Thomas) - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation - Add send completion interrupt coalescing for ib_isert - Convert target-core to use percpu-refcounting for se_lun - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn - tcm_loop updates (Hannes) - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes) v3.14 is currently shaping to be a busy development cycle in target land, with initial support for T10 Referrals and T10 DIF currently on the roadmap" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits) iscsi-target: chap auth shouldn't match username with trailing garbage iscsi-target: fix extract_param to handle buffer length corner case iscsi-target: Expose default_erl as TPG attribute target_core_configfs: split up ALUA supported states target_core_alua: Make supported states configurable target_core_alua: Store supported ALUA states target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED target_core_alua: spellcheck target core: rename (ex,im)plict -> (ex,im)plicit percpu-refcount: Add percpu-refcount.o to obj-y iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN iscsi-target: Convert iscsi_session statistics to atomic_long_t target: Convert se_device statistics to atomic_long_t target: Fix delayed Task Aborted Status (TAS) handling bug iscsi-target: Reject unsupported multi PDU text command sequence ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn target: Core does not need blkdev.h target: Pass through I/O topology for block backstores iser-target: Avoid using FRMR for single dma entry requests ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fixes from Guenter Roeck: - acpi_power_meter: Fix return value check from call to acpi_bus_get_device - nct6775: Fix/improve NCT6791 support - lm75: Add support for GMT G751 * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (acpi_power_meter) Fix acpi_bus_get_device() return value check hwmon: (nct6775) NCT6791 supports weight control only for CPUFAN hwmon: (nct6775) Monitor additional temperature registers hwmon: (lm75) Add support for GMT G751 chip
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix memory leaks and other issues in mwifiex driver, from Amitkumar Karwar. 2) skb_segment() can choke on packets using frag lists, fix from Herbert Xu with help from Eric Dumazet and others. 3) IPv4 output cached route instantiation properly handles races involving two threads trying to install the same route, but we forgot to propagate this logic to input routes as well. Fix from Alexei Starovoitov. 4) Put protections in place to make sure that recvmsg() paths never accidently copy uninitialized memory back into userspace and also make sure that we never try to use more that sockaddr_storage for building the on-kernel-stack copy of a sockaddr. Fixes from Hannes Frederic Sowa. 5) R8152 driver transmit flow bug fixes from Hayes Wang. 6) Fix some minor fallouts from genetlink changes, from Johannes Berg and Michael Opdenacker. 7) AF_PACKET sendmsg path can race with netdevice unregister notifier, fix by using RCU to make sure the network device doesn't go away from under us. Fix from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) gso: handle new frag_list of frags GRO packets genetlink: fix genl_set_err() group ID genetlink: fix genlmsg_multicast() bug packet: fix use after free race in send path when dev is released xen-netback: stop the VIF thread before unbinding IRQs wimax: remove dead code net/phy: Add the autocross feature for forced links on VSC82x4 net/phy: Add VSC8662 support net/phy: Add VSC8574 support net/phy: Add VSC8234 support net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage) net: rework recvmsg handler msg_name and msg_namelen logic bridge: flush br's address entry in fdb when remove the net: core: Always propagate flag changes to interfaces ipv4: fix race in concurrent ip_route_input_slow() r8152: fix incorrect type in assignment r8152: support stopping/waking tx queue r8152: modify the tx flow r8152: fix tx/rx memory overflow netfilter: ebt_ip6: fix source and destination matching ...
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Some small fixes for this merge window, most of them quite self explanatory - the biggest thing here is a fix for the ARMv7 LPAE suspend/resume support" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7894/1: kconfig: select GENERIC_CLOCKEVENTS if HAVE_ARM_ARCH_TIMER ARM: 7893/1: bitops: only emit .arch_extension mp if CONFIG_SMP ARM: 7892/1: Fix warning for V7M builds ARM: 7888/1: seccomp: not compatible with ARM OABI ARM: 7886/1: make OABI default to off ARM: 7885/1: Save/Restore 64-bit TTBR registers on LPAE suspend/resume ARM: 7884/1: mm: Fix ECC mem policy printk ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE ARM: 7882/1: mm: fix __phys_to_virt to work with 64 bit phys_addr_t in BE case ARM: 7881/1: __fixup_smp read of SCU config should do byteswap in BE case ARM: Fix nommu.c build warning
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Gleb Natapov. * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: kvm_clear_guest_page(): fix empty_zero_page usage kvm: mmu: delay mmu audit activation arm/arm64: KVM: Fix hyp mappings of vmalloc regions
-
git://git.kvack.org/~bcrl/aio-next由 Linus Torvalds 提交于
Pull aio fixes from Benjamin LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: nullify aio->ring_pages after freeing it aio: prevent double free in ioctx_alloc aio: Fix a trinity splat
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd bugfixes from Bruce Fields: "A couple nfsd bugfixes" * 'for-3.13' of git://linux-nfs.org/~bfields/linux: nfsd4: fix xdr decoding of large non-write compounds nfsd: make sure to balance get/put_write_access nfsd: split up nfsd_setattr
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes由 Linus Torvalds 提交于
Pull GFS2 fixes from Steven Whitehouse: "A couple of small, but important bug fixes for GFS2. The first one fixes a possible NULL pointer dereference, and the second one resolves a reference counting issue in one of the lesser used paths through atomic_open" * tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Fix ref count bug relating to atomic_open GFS2: fix potential NULL pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "Almost all of these are bug fixes. Dave Sterba's documentation update is the big exception because he removed our promises to set any machine running Btrfs on fire" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Documentation: filesystems: update btrfs tools section Documentation: filesystems: add new btrfs mount options btrfs: update kconfig help text btrfs: fix bio_size_ok() for max_sectors > 0xffff btrfs: Use trace condition for get_extent tracepoint btrfs: fix typo in the log message Btrfs: fix list delete warning when removing ordered root from the list Btrfs: print bytenr instead of page pointer in check-int Btrfs: remove dead codes from ctree.h Btrfs: don't wait for ordered data outside desired range Btrfs: fix lockdep error in async commit Btrfs: avoid heavy operations in btrfs_commit_super Btrfs: fix __btrfs_start_workers retval Btrfs: disable online raid-repair on ro mounts Btrfs: do not inc uncorrectable_errors counter on ro scrubs Btrfs: only drop modified extents if we logged the whole inode Btrfs: make sure to copy everything if we rename Btrfs: don't BUG_ON() if we get an error walking backrefs
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
Pull second xfs update from Ben Myers: "There are a couple of patches that I wasn't quite sure about in time for our initial 3.13 pull request, a bugfix, and an update to add Dave to MAINTAINERS: Here we have a performance fix for inode iversion, increased inode cluster size for v5 superblock filesystems, a fix for error handling in xfs_bmap_add_attrfork, and a MAINTAINERS update to add Dave" * tag 'xfs-for-linus-v3.13-rc1-2' of git://oss.sgi.com/xfs/xfs: xfs: open code inc_inode_iversion when logging an inode xfs: increase inode cluster size for v5 filesystems xfs: fix unlock in xfs_bmap_add_attrfork xfs: update maintainers
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux由 Linus Torvalds 提交于
Pull SLAB changes from Pekka Enberg: "The patches from Joonsoo Kim switch mm/slab.c to use 'struct page' for slab internals similar to mm/slub.c. This reduces memory usage and improves performance: https://lkml.org/lkml/2013/10/16/155 Rest of the changes are bug fixes from various people" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: (21 commits) mm, slub: fix the typo in mm/slub.c mm, slub: fix the typo in include/linux/slub_def.h slub: Handle NULL parameter in kmem_cache_flags slab: replace non-existing 'struct freelist *' with 'void *' slab: fix to calm down kmemleak warning slub: proper kmemleak tracking if CONFIG_SLUB_DEBUG disabled slab: rename slab_bufctl to slab_freelist slab: remove useless statement for checking pfmemalloc slab: use struct page for slab management slab: replace free and inuse in struct slab with newly introduced active slab: remove SLAB_LIMIT slab: remove kmem_bufctl_t slab: change the management method of free objects of the slab slab: use __GFP_COMP flag for allocating slab pages slab: use well-defined macro, virt_to_slab() slab: overloading the RCU head over the LRU for RCU free slab: remove cachep in struct slab_rcu slab: remove nodeid in struct slab slab: remove colouroff in struct slab slab: change return type of kmem_getpages() to struct page ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull third set of powerpc updates from Benjamin Herrenschmidt: "This is a small collection of random bug fixes and a few improvements of Oops output which I deemed valuable enough to include as well. The fixes are essentially recent build breakage and regressions, and a couple of older bugs such as the DTL log duplication, the EEH issue with PCI_COMMAND_MASTER and the problem with small contexts passed to get/set_context with VSX enabled" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/signals: Mark VSX not saved with small contexts powerpc/pseries: Fix SMP=n build of rng.c powerpc: Make cpu_to_chip_id() available when SMP=n powerpc/vio: Fix a dma_mask issue of vio powerpc: booke: Fix build failures powerpc: ppc64 address space capped at 32TB, mmap randomisation disabled powerpc: Only print PACATMSCRATCH in oops when TM is active powerpc/pseries: Duplicate dtl entries sometimes sent to userspace powerpc: Remove a few lines of oops output powerpc: Print DAR and DSISR on machine check oopses powerpc: Fix __get_user_pages_fast() irq handling powerpc/eeh: More accurate log powerpc/eeh: Enable PCI_COMMAND_MASTER for PCI bridges
-
- 22 11月, 2013 1 次提交
-
-
由 David Henningsson 提交于
current_headset_type should be of the HEADSET_TYPE enum, not the HEADSET_MODE enum. Since ALC_HEADSET_TYPE_UNKNOWN and ALC_HEADSET_MODE_UNKNOWN are both 0, this patch is just janitorial. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-