1. 19 6月, 2017 1 次提交
    • H
      mm: larger stack guard gap, between vmas · 1be7107f
      Hugh Dickins 提交于
      Stack guard page is a useful feature to reduce a risk of stack smashing
      into a different mapping. We have been using a single page gap which
      is sufficient to prevent having stack adjacent to a different mapping.
      But this seems to be insufficient in the light of the stack usage in
      userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
      used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
      which is 256kB or stack strings with MAX_ARG_STRLEN.
      
      This will become especially dangerous for suid binaries and the default
      no limit for the stack size limit because those applications can be
      tricked to consume a large portion of the stack and a single glibc call
      could jump over the guard page. These attacks are not theoretical,
      unfortunatelly.
      
      Make those attacks less probable by increasing the stack guard gap
      to 1MB (on systems with 4k pages; but make it depend on the page size
      because systems with larger base pages might cap stack allocations in
      the PAGE_SIZE units) which should cover larger alloca() and VLA stack
      allocations. It is obviously not a full fix because the problem is
      somehow inherent, but it should reduce attack space a lot.
      
      One could argue that the gap size should be configurable from userspace,
      but that can be done later when somebody finds that the new 1MB is wrong
      for some special case applications.  For now, add a kernel command line
      option (stack_guard_gap) to specify the stack gap size (in page units).
      
      Implementation wise, first delete all the old code for stack guard page:
      because although we could get away with accounting one extra page in a
      stack vma, accounting a larger gap can break userspace - case in point,
      a program run with "ulimit -S -v 20000" failed when the 1MB gap was
      counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
      and strict non-overcommit mode.
      
      Instead of keeping gap inside the stack vma, maintain the stack guard
      gap as a gap between vmas: using vm_start_gap() in place of vm_start
      (or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
      places which need to respect the gap - mainly arch_get_unmapped_area(),
      and and the vma tree's subtree_gap support for that.
      Original-patch-by: NOleg Nesterov <oleg@redhat.com>
      Original-patch-by: NMichal Hocko <mhocko@suse.com>
      Signed-off-by: NHugh Dickins <hughd@google.com>
      Acked-by: NMichal Hocko <mhocko@suse.com>
      Tested-by: Helge Deller <deller@gmx.de> # parisc
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1be7107f
  2. 03 6月, 2017 1 次提交
    • R
      mm: avoid spurious 'bad pmd' warning messages · d0f0931d
      Ross Zwisler 提交于
      When the pmd_devmap() checks were added by 5c7fb56e ("mm, dax:
      dax-pmd vs thp-pmd vs hugetlbfs-pmd") to add better support for DAX huge
      pages, they were all added to the end of if() statements after existing
      pmd_trans_huge() checks.  So, things like:
      
        -       if (pmd_trans_huge(*pmd))
        +       if (pmd_trans_huge(*pmd) || pmd_devmap(*pmd))
      
      When further checks were added after pmd_trans_unstable() checks by
      commit 7267ec00 ("mm: postpone page table allocation until we have
      page to map") they were also added at the end of the conditional:
      
        +       if (pmd_trans_unstable(fe->pmd) || pmd_devmap(*fe->pmd))
      
      This ordering is fine for pmd_trans_huge(), but doesn't work for
      pmd_trans_unstable().  This is because DAX huge pages trip the bad_pmd()
      check inside of pmd_none_or_trans_huge_or_clear_bad() (called by
      pmd_trans_unstable()), which prints out a warning and returns 1.  So, we
      do end up doing the right thing, but only after spamming dmesg with
      suspicious looking messages:
      
        mm/pgtable-generic.c:39: bad pmd ffff8808daa49b88(84000001006000a5)
      
      Reorder these checks in a helper so that pmd_devmap() is checked first,
      avoiding the error messages, and add a comment explaining why the
      ordering is important.
      
      Fixes: commit 7267ec00 ("mm: postpone page table allocation until we have page to map")
      Link: http://lkml.kernel.org/r/20170522215749.23516-1-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
      Reviewed-by: NJan Kara <jack@suse.cz>
      Cc: Pawel Lebioda <pawel.lebioda@intel.com>
      Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Dave Hansen <dave.hansen@intel.com>
      Cc: Matthew Wilcox <mawilcox@microsoft.com>
      Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
      Cc: Dave Jiang <dave.jiang@intel.com>
      Cc: Xiong Zhou <xzhou@redhat.com>
      Cc: Eryu Guan <eguan@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d0f0931d
  3. 29 3月, 2017 1 次提交
  4. 10 3月, 2017 2 次提交
  5. 02 3月, 2017 4 次提交
  6. 25 2月, 2017 8 次提交
  7. 23 2月, 2017 7 次提交
  8. 11 1月, 2017 2 次提交
  9. 08 1月, 2017 1 次提交
    • H
      mm: stop leaking PageTables · b0b9b3df
      Hugh Dickins 提交于
      4.10-rc loadtest (even on x86, and even without THPCache) fails with
      "fork: Cannot allocate memory" or some such; and /proc/meminfo shows
      PageTables growing.
      
      Commit 953c66c2 ("mm: THP page cache support for ppc64") that got
      merged in rc1 removed the freeing of an unused preallocated pagetable
      after do_fault_around() has called map_pages().
      
      This is usually a good optimization, so that the followup doesn't have
      to reallocate one; but it's not sufficient to shift the freeing into
      alloc_set_pte(), since there are failure cases (most commonly
      VM_FAULT_RETRY) which never reach finish_fault().
      
      Check and free it at the outer level in do_fault(), then we don't need
      to worry in alloc_set_pte(), and can restore that to how it was (I
      cannot find any reason to pte_free() under lock as it was doing).
      
      And fix a separate pagetable leak, or crash, introduced by the same
      change, that could only show up on some ppc64: why does do_set_pmd()'s
      failure case attempt to withdraw a pagetable when it never deposited
      one, at the same time overwriting (so leaking) the vmf->prealloc_pte?
      Residue of an earlier implementation, perhaps? Delete it.
      
      Fixes: 953c66c2 ("mm: THP page cache support for ppc64")
      Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Michael Neuling <mikey@neuling.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NHugh Dickins <hughd@google.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b0b9b3df
  10. 25 12月, 2016 1 次提交
  11. 15 12月, 2016 12 次提交