- 08 4月, 2014 20 次提交
-
-
由 Andrew Morton 提交于
"mm: introduce vm_ops->map_pages()" wants to export a do_set_pte() from core kernel. Rename lguest's do_set_pte() to something more lguest-specific. Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Konstantin Khlebnikov 提交于
After this patch 'page-types' can walk over a file's mappings and analyze populated page cache pages mostly without disturbing its state. It maps chunk of file, marks VMA as MADV_RANDOM to turn off readahead, pokes VMA via mincore() to determine cached pages, triggers page-fault only for them, and finally gathers information via pagemap/kpageflags. Before unmap it marks VMA as MADV_SEQUENTIAL for ignoring reference bits. usage: page-types -f <path> If <path> is directory it will analyse all files in all subdirectories. Symlinks are not followed as well as mount points. Hardlinks aren't handled, they'll be dumped as many times as they are found. Recursive walk brings all dentries into dcache and populates page cache of block-devices aka 'Buffers'. Probably it's worth to add ioctl for dumping file page cache as array of PFNs as a replacement for this hackish juggling with mmap/madvise/mincore/pagemap. Also recursive walk could be replaced with dumping cached inodes via some ioctl or debugfs interface followed by openning them via open_by_handle_at, this would fix hardlinks handling and unneeded population of dcache and buffers. This interface might be used as data source for constructing readahead plans and for background optimizations of actively used files. collateral changes: + fix 64-bit LFS: define _FILE_OFFSET_BITS instead of _LARGEFILE64_SOURCE + replace lseek + read with single pread + make show_page_range() reusable after flush usage example: ~/src/linux/tools/vm$ sudo ./page-types -L -f page-types foffset offset flags page-types Inode: 2229277 Size: 89065 (22 pages) Modify: Tue Feb 25 12:00:59 2014 (162 seconds ago) Access: Tue Feb 25 12:01:00 2014 (161 seconds ago) 0 3cbf3b __RU_lA____M________________________ 1 38946a __RU_lA____M________________________ 2 1a3cec __RU_lA____M________________________ 3 1a8321 __RU_lA____M________________________ 4 3af7cc __RU_lA____M________________________ 5 1ed532 __RU_lA_____________________________ 6 2e436a __RU_lA_____________________________ 7 29a35e ___U_lA_____________________________ 8 2de86e ___U_lA_____________________________ 9 3bdfb4 ___U_lA_____________________________ 10 3cd8a3 ___U_lA_____________________________ 11 2afa50 ___U_lA_____________________________ 12 2534c2 ___U_lA_____________________________ 13 1b7a40 ___U_lA_____________________________ 14 17b0be ___U_lA_____________________________ 15 392b0c ___U_lA_____________________________ 16 3ba46a __RU_lA_____________________________ 17 397dc8 ___U_lA_____________________________ 18 1f2a36 ___U_lA_____________________________ 19 21fd30 __RU_lA_____________________________ 20 2c35ba __RU_l______________________________ 21 20f181 __RU_l______________________________ flags page-count MB symbolic-flags long-symbolic-flags 0x000000000000002c 2 0 __RU_l______________________________ referenced,uptodate,lru 0x0000000000000068 11 0 ___U_lA_____________________________ uptodate,lru,active 0x000000000000006c 4 0 __RU_lA_____________________________ referenced,uptodate,lru,active 0x000000000000086c 5 0 __RU_lA____M________________________ referenced,uptodate,lru,active,mmap total 22 0 ~/src/linux/tools/vm$ sudo ./page-types -f / flags page-count MB symbolic-flags long-symbolic-flags 0x0000000000000028 21761 85 ___U_l______________________________ uptodate,lru 0x000000000000002c 127279 497 __RU_l______________________________ referenced,uptodate,lru 0x0000000000000068 74160 289 ___U_lA_____________________________ uptodate,lru,active 0x000000000000006c 84469 329 __RU_lA_____________________________ referenced,uptodate,lru,active 0x000000000000007c 1 0 __RUDlA_____________________________ referenced,uptodate,dirty,lru,active 0x0000000000000228 370 1 ___U_l___I__________________________ uptodate,lru,reclaim 0x0000000000000828 49 0 ___U_l_____M________________________ uptodate,lru,mmap 0x000000000000082c 126 0 __RU_l_____M________________________ referenced,uptodate,lru,mmap 0x0000000000000868 137 0 ___U_lA____M________________________ uptodate,lru,active,mmap 0x000000000000086c 12890 50 __RU_lA____M________________________ referenced,uptodate,lru,active,mmap total 321242 1254 Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
There's no reason to enable split page table lock if don't have page tables. It also triggers build error at least on ARM since we don't define pmd_page() for !MMU. In file included from arch/arm/kernel/asm-offsets.c:14:0: include/linux/mm.h: In function 'pte_lockptr': include/linux/mm.h:1392:2: error: implicit declaration of function 'pmd_page' [-Werror=implicit-function-declaration] include/linux/mm.h:1392:2: warning: passing argument 1 of 'ptlock_ptr' makes pointer from integer without a cast [enabled by default] include/linux/mm.h:1384:27: note: expected 'struct page *' but argument is of type 'int' Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Thorlton 提交于
load_elf_binary() sets current->mm->def_flags = def_flags and def_flags is always zero. Not only this looks strange, this is unnecessary because mm_init() has already set ->def_flags = 0. Signed-off-by: NAlex Thorlton <athorlton@sgi.com> Suggested-by: NOleg Nesterov <oleg@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Thorlton 提交于
Add VM_INIT_DEF_MASK, to allow us to set the default flags for VMs. It also adds a prctl control which allows us to set the THP disable bit in mm->def_flags so that VMs will pick up the setting as they are created. Signed-off-by: NAlex Thorlton <athorlton@sgi.com> Suggested-by: NOleg Nesterov <oleg@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Thorlton 提交于
The main motivation behind this patch is to provide a way to disable THP for jobs where the code cannot be modified, and using a malloc hook with madvise is not an option (i.e. statically allocated data). This patch allows us to do just that, without affecting other jobs running on the system. We need to do this sort of thing for jobs where THP hurts performance, due to the possibility of increased remote memory accesses that can be created by situations such as the following: When you touch 1 byte of an untouched, contiguous 2MB chunk, a THP will be handed out, and the THP will be stuck on whatever node the chunk was originally referenced from. If many remote nodes need to do work on that same chunk, they'll be making remote accesses. With THP disabled, 4K pages can be handed out to separate nodes as they're needed, greatly reducing the amount of remote accesses to memory. This patch is based on some of my work combined with some suggestions/patches given by Oleg Nesterov. The main goal here is to add a prctl switch to allow us to disable to THP on a per mm_struct basis. Here's a bit of test data with the new patch in place... First with the flag unset: # perf stat -a ./prctl_wrapper_mmv3 0 ./thp_pthread -C 0 -m 0 -c 512 -b 256g Setting thp_disabled for this task... thp_disable: 0 Set thp_disabled state to 0 Process pid = 18027 PF/ MAX MIN TOTCPU/ TOT_PF/ TOT_PF/ WSEC/ TYPE: CPUS WALL WALL SYS USER TOTCPU CPU WALL_SEC SYS_SEC CPU NODES 512 1.120 0.060 0.000 0.110 0.110 0.000 28571428864 -9223372036854775808 55803572 23 Performance counter stats for './prctl_wrapper_mmv3_hack 0 ./thp_pthread -C 0 -m 0 -c 512 -b 256g': 273719072.841402 task-clock # 641.026 CPUs utilized [100.00%] 1,008,986 context-switches # 0.000 M/sec [100.00%] 7,717 CPU-migrations # 0.000 M/sec [100.00%] 1,698,932 page-faults # 0.000 M/sec 355,222,544,890,379 cycles # 1.298 GHz [100.00%] 536,445,412,234,588 stalled-cycles-frontend # 151.02% frontend cycles idle [100.00%] 409,110,531,310,223 stalled-cycles-backend # 115.17% backend cycles idle [100.00%] 148,286,797,266,411 instructions # 0.42 insns per cycle # 3.62 stalled cycles per insn [100.00%] 27,061,793,159,503 branches # 98.867 M/sec [100.00%] 1,188,655,196 branch-misses # 0.00% of all branches 427.001706337 seconds time elapsed Now with the flag set: # perf stat -a ./prctl_wrapper_mmv3 1 ./thp_pthread -C 0 -m 0 -c 512 -b 256g Setting thp_disabled for this task... thp_disable: 1 Set thp_disabled state to 1 Process pid = 144957 PF/ MAX MIN TOTCPU/ TOT_PF/ TOT_PF/ WSEC/ TYPE: CPUS WALL WALL SYS USER TOTCPU CPU WALL_SEC SYS_SEC CPU NODES 512 0.620 0.260 0.250 0.320 0.570 0.001 51612901376 128000000000 100806448 23 Performance counter stats for './prctl_wrapper_mmv3_hack 1 ./thp_pthread -C 0 -m 0 -c 512 -b 256g': 138789390.540183 task-clock # 641.959 CPUs utilized [100.00%] 534,205 context-switches # 0.000 M/sec [100.00%] 4,595 CPU-migrations # 0.000 M/sec [100.00%] 63,133,119 page-faults # 0.000 M/sec 147,977,747,269,768 cycles # 1.066 GHz [100.00%] 200,524,196,493,108 stalled-cycles-frontend # 135.51% frontend cycles idle [100.00%] 105,175,163,716,388 stalled-cycles-backend # 71.07% backend cycles idle [100.00%] 180,916,213,503,160 instructions # 1.22 insns per cycle # 1.11 stalled cycles per insn [100.00%] 26,999,511,005,868 branches # 194.536 M/sec [100.00%] 714,066,351 branch-misses # 0.00% of all branches 216.196778807 seconds time elapsed As with previous versions of the patch, We're getting about a 2x performance increase here. Here's a link to the test case I used, along with the little wrapper to activate the flag: http://oss.sgi.com/projects/memtests/thp_pthread_mmprctlv3.tar.gz This patch (of 3): Revert commit 8e72033f and add in code to fix up any issues caused by the revert. The revert is necessary because hugepage_madvise would return -EINVAL when VM_NOHUGEPAGE is set, which will break subsequent chunks of this patch set. Here's a snip of an e-mail from Gerald detailing the original purpose of this code, and providing justification for the revert: "The intent of commit 8e72033f was to guard against any future programming errors that may result in an madvice(MADV_HUGEPAGE) on guest mappings, which would crash the kernel. Martin suggested adding the bit to arch/s390/mm/pgtable.c, if 8e72033f was to be reverted, because that check will also prevent a kernel crash in the case described above, it will now send a SIGSEGV instead. This would now also allow to do the madvise on other parts, if needed, so it is a more flexible approach. One could also say that it would have been better to do it this way right from the beginning..." Signed-off-by: NAlex Thorlton <athorlton@sgi.com> Suggested-by: NOleg Nesterov <oleg@redhat.com> Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
It is just for clean-up to reduce code size and improve readability. There is no functional change. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
isolation_suitable() and migrate_async_suitable() is used to be sure that this pageblock range is fine to be migragted. It isn't needed to call it on every page. Current code do well if not suitable, but, don't do well when suitable. 1) It re-checks isolation_suitable() on each page of a pageblock that was already estabilished as suitable. 2) It re-checks migrate_async_suitable() on each page of a pageblock that was not entered through the next_pageblock: label, because last_pageblock_nr is not otherwise updated. This patch fixes situation by 1) calling isolation_suitable() only once per pageblock and 2) always updating last_pageblock_nr to the pageblock that was just checked. Additionally, move PageBuddy() check after pageblock unit check, since pageblock check is the first thing we should do and makes things more simple. [vbabka@suse.cz: rephrase commit description] Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
It is odd to drop the spinlock when we scan (SWAP_CLUSTER_MAX - 1) th pfn page. This may results in below situation while isolating migratepage. 1. try isolate 0x0 ~ 0x200 pfn pages. 2. When low_pfn is 0x1ff, ((low_pfn+1) % SWAP_CLUSTER_MAX) == 0, so drop the spinlock. 3. Then, to complete isolating, retry to aquire the lock. I think that it is better to use SWAP_CLUSTER_MAX th pfn for checking the criteria about dropping the lock. This has no harm 0x0 pfn, because, at this time, locked variable would be false. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
suitable_migration_target() checks that pageblock is suitable for migration target. In isolate_freepages_block(), it is called on every page and this is inefficient. So make it called once per pageblock. suitable_migration_target() also checks if page is highorder or not, but it's criteria for highorder is pageblock order. So calling it once within pageblock range has no problem. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
Purpose of compaction is to get a high order page. Currently, if we find high-order page while searching migration target page, we break it to order-0 pages and use them as migration target. It is contrary to purpose of compaction, so disallow high-order page to be used for migration target. Additionally, clean-up logic in suitable_migration_target() to simplify the code. There is no functional changes from this clean-up. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
We had a report about strange OOM killer strikes on a PPC machine although there was a lot of swap free and a tons of anonymous memory which could be swapped out. In the end it turned out that the OOM was a side effect of zone reclaim which wasn't unmapping and swapping out and so the system was pushed to the OOM. Although this sounds like a bug somewhere in the kswapd vs. zone reclaim vs. direct reclaim interaction numactl on the said hardware suggests that the zone reclaim should not have been set in the first place: node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 node 0 size: 0 MB node 0 free: 0 MB node 2 cpus: node 2 size: 7168 MB node 2 free: 6019 MB node distances: node 0 2 0: 10 40 2: 40 10 So all the CPUs are associated with Node0 which doesn't have any memory while Node2 contains all the available memory. Node distances cause an automatic zone_reclaim_mode enabling. Zone reclaim is intended to keep the allocations local but this doesn't make any sense on the memoryless nodes. So let's exclude such nodes for init_zone_allows_reclaim which evaluates zone reclaim behavior and suitable reclaim_nodes. Signed-off-by: NMichal Hocko <mhocko@suse.cz> Acked-by: NDavid Rientjes <rientjes@google.com> Acked-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com> Tested-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com> Acked-by: NMel Gorman <mgorman@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
The described issue now occurs inside mmap_region(). And unfortunately is still valid. Signed-off-by: NDavidlohr Bueso <davidlohr@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Weijie Yang 提交于
We abort direct reclaim if we find the zone is ready for compaction. Sometimes the zone is just a promoted highmem zone to force a scan of highmem, which is not the intended zone the caller want to allocate a page from. In this situation, setting aborted_reclaim to indicate the caller turned back to retry the allocation is waste of time and could cause a loop in __alloc_pages_slowpath(). This patch does not check compaction_ready() on promoted zones to avoid the above situation. Only set aborted_reclaim if the caller intended zone is ready for compaction. Signed-off-by: NWeijie Yang <weijie.yang@samsung.com> Acked-by: NRik van Riel <riel@redhat.com> Acked-by: NMel Gorman <mgorman@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Weijie Yang 提交于
We promote sc->gfp_mask to __GFP_HIGHMEM to forcibly scan highmem if there are too many buffer_heads pinning highmem. See cc715d99 ("mm: vmscan: forcibly scan highmem if there are too many buffer_heads pinning highmem"). This patch restores sc->gfp_mask to its caller original value after finishing the scan job, to avoid the impact on other invocations from its upper caller, such as vmpressure_prio(), shrink_slab(). Signed-off-by: NWeijie Yang <weijie.yang@samsung.com> Acked-by: NMel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rik van Riel 提交于
The NUMA scanning code can end up iterating over many gigabytes of unpopulated memory, especially in the case of a freshly started KVM guest with lots of memory. This results in the mmu notifier code being called even when there are no mapped pages in a virtual address range. The amount of time wasted can be enough to trigger soft lockup warnings with very large KVM guests. This patch moves the mmu notifier call to the pmd level, which represents 1GB areas of memory on x86-64. Furthermore, the mmu notifier code is only called from the address in the PMD where present mappings are first encountered. The hugetlbfs code is left alone for now; hugetlb mappings are not relocatable, and as such are left alone by the NUMA code, and should never trigger this problem to begin with. Signed-off-by: NRik van Riel <riel@redhat.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Reported-by: NXing Gang <gang.xing@hp.com> Tested-by: NChegu Vinod <chegu_vinod@hp.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Sasha reported the following bug using trinity kernel BUG at mm/mprotect.c:149! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 20 PID: 26219 Comm: trinity-c216 Tainted: G W 3.14.0-rc5-next-20140305-sasha-00011-ge06f5f3-dirty #105 task: ffff8800b6c80000 ti: ffff880228436000 task.ti: ffff880228436000 RIP: change_protection_range+0x3b3/0x500 Call Trace: change_protection+0x25/0x30 change_prot_numa+0x1b/0x30 task_numa_work+0x279/0x360 task_work_run+0xae/0xf0 do_notify_resume+0x8e/0xe0 retint_signal+0x4d/0x92 The VM_BUG_ON was added in -mm by the patch "mm,numa: reorganize change_pmd_range". The race existed without the patch but was just harder to hit. The problem is that a transhuge check is made without holding the PTL. It's possible at the time of the check that a parallel fault clears the pmd and inserts a new one which then triggers the VM_BUG_ON check. This patch removes the VM_BUG_ON but fixes the race by rechecking transhuge under the PTL when marking page tables for NUMA hinting and bailing if a race occurred. It is not a problem for calls to mprotect() as they hold mmap_sem for write. Signed-off-by: NMel Gorman <mgorman@suse.de> Reported-by: NSasha Levin <sasha.levin@oracle.com> Reviewed-by: NRik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rik van Riel 提交于
Reorganize the order of ifs in change_pmd_range a little, in preparation for the next patch. [akpm@linux-foundation.org: fix indenting, per David] Signed-off-by: NRik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Reported-by: NXing Gang <gang.xing@hp.com> Tested-by: NChegu Vinod <chegu_vinod@hp.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Naoya Horiguchi 提交于
huge_pte_offset() could return NULL, so we need NULL check to avoid potential NULL pointer dereferences. Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fabian Frederick 提交于
- Convert spinlock/static array to va_format (inspired by Joe Perches help on previous logging patches). - Convert printk(KERN_ERR to pr_warn in __ntfs_warning. - Convert printk(KERN_ERR to pr_err in __ntfs_error. - Convert printk(KERN_DEBUG to pr_debug in __ntfs_debug. (Note that __ntfs_debug is still guarded by #if DEBUG) - Improve !DEBUG to parse all arguments (Joe Perches). - Sparse pr_foo() conversions in super.c NTFS, NTFS-fs prefixes as well as 'warning' and 'error' were removed : pr_foo() automatically adds module name and error level is already specified. Signed-off-by: NFabian Frederick <fabf@skynet.be> Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 4月, 2014 2 次提交
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client updates from Trond Myklebust: "Highlights include: - Stable fix for a use after free issue in the NFSv4.1 open code - Fix the SUNRPC bi-directional RPC code to account for TCP segmentation - Optimise usage of readdirplus when confronted with 'ls -l' situations - Soft mount bugfixes - NFS over RDMA bugfixes - NFSv4 close locking fixes - Various NFSv4.x client state management optimisations - Rename/unlink code cleanups" * tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits) nfs: pass string length to pr_notice message about readdir loops NFSv4: Fix a use-after-free problem in open() SUNRPC: rpc_restart_call/rpc_restart_call_prepare should clear task->tk_status SUNRPC: Don't let rpc_delay() clobber non-timeout errors SUNRPC: Ensure call_connect_status() deals correctly with SOFTCONN tasks SUNRPC: Ensure call_status() deals correctly with SOFTCONN tasks NFSv4: Ensure we respect soft mount timeouts during trunking discovery NFSv4: Schedule recovery if nfs40_walk_client_list() is interrupted NFS: advertise only supported callback netids SUNRPC: remove KERN_INFO from dprintk() call sites SUNRPC: Fix large reads on NFS/RDMA NFS: Clean up: revert increase in READDIR RPC buffer max size SUNRPC: Ensure that call_bind times out correctly SUNRPC: Ensure that call_connect times out correctly nfs: emit a fsnotify_nameremove call in sillyrename codepath nfs: remove synchronous rename code nfs: convert nfs_rename to use async_rename infrastructure nfs: make nfs_async_rename non-static nfs: abstract out code needed to complete a sillyrename NFSv4: Clear the open state flags if the new stateid does not match ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module updates from Rusty Russell: "Nothing major: the stricter permissions checking for sysfs broke a staging driver; fix included. Greg KH said he'd take the patch but hadn't as the merge window opened, so it's included here to avoid breaking build" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: staging: fix up speakup kobject mode Use 'E' instead of 'X' for unsigned module taint flag. VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms. kallsyms: fix percpu vars on x86-64 with relocation. kallsyms: generalize address range checking module: LLVMLinux: Remove unused function warning from __param_check macro Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE module: remove MODULE_GENERIC_TABLE module: allow multiple calls to MODULE_DEVICE_TABLE() per module module: use pr_cont
-
- 06 4月, 2014 18 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull arch/tile updates from Chris Metcalf: "These fix a few stray build issues seen in linux-next, and also add the minimal required support for perf to tilegx" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: remove unused variable 'devcap' tile: Fix vDSO compilation issue with allyesconfig perf tools: Allow building for tile tile/perf: Support perf_events on tilegx and tilepro tile: Enable NMIs on return from handle_nmi() without errors tile: Add support for handling PMC hardware tile: don't use __get_cpu_var() with structure-typed arguments tile: avoid overflow in ns2cycles
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper changes from Mike Snitzer: - Fix dm-cache corruption caused by discard_block_size > cache_block_size - Fix a lock-inversion detected by LOCKDEP in dm-cache - Fix a dangling bio bug in the dm-thinp target's process_deferred_bios error path - Fix corruption due to non-atomic transaction commit which allowed a metadata superblock to be written before all other metadata was successfully written -- this is common to all targets that use the persistent-data library's transaction manager (dm-thinp, dm-cache and dm-era). - Various small cleanups in the DM core - Add the dm-era target which is useful for keeping track of which blocks were written within a user defined period of time called an 'era'. Use cases include tracking changed blocks for backup software, and partially invalidating the contents of a cache to restore cache coherency after rolling back a vendor snapshot. - Improve the on-disk layout of multithreaded writes to the dm-thin-pool by splitting the pool's deferred bio list to be a per-thin device list and then sorting that list using an rb_tree. The subsequent read throughput of the data written via multiple threads improved by ~70%. - Simplify the multipath target's handling of queuing IO by pushing requests back to the request queue rather than queueing the IO internally. * tag 'dm-3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (24 commits) dm cache: fix a lock-inversion dm thin: sort the per thin deferred bios using an rb_tree dm thin: use per thin device deferred bio lists dm thin: simplify pool_is_congested dm thin: fix dangling bio in process_deferred_bios error path dm mpath: print more useful warnings in multipath_message() dm-mpath: do not activate failed paths dm mpath: remove extra nesting in map function dm mpath: remove map_io() dm mpath: reduce memory pressure when requeuing dm mpath: remove process_queued_ios() dm mpath: push back requests instead of queueing dm table: add dm_table_run_md_queue_async dm mpath: do not call pg_init when it is already running dm: use RCU_INIT_POINTER instead of rcu_assign_pointer in __unbind dm: stop using bi_private dm: remove dm_get_mapinfo dm: make dm_table_alloc_md_mempools static dm: take care to copy the space map roots before locking the superblock dm transaction manager: fix corruption due to non-atomic transaction commit ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU upates from Joerg Roedel: "This time a few more updates queued up. - Rework VT-d code to support ACPI devices - Improvements for memory and PCI hotplug support in the VT-d driver - Device-tree support for OMAP IOMMU - Convert OMAP IOMMU to use devm_* interfaces - Fixed PASID support for AMD IOMMU - Other random cleanups and fixes for OMAP, ARM-SMMU and SHMOBILE IOMMU Most of the changes are in the VT-d driver because some rework was necessary for better hotplug and ACPI device support" * tag 'iommu-updates-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (75 commits) iommu/vt-d: Fix error handling in ANDD processing iommu/vt-d: returning free pointer in get_domain_for_dev() iommu/vt-d: Only call dmar_acpi_dev_scope_init() if DRHD units present iommu/vt-d: Check for NULL pointer in dmar_acpi_dev_scope_init() iommu/amd: Fix logic to determine and checking max PASID iommu/vt-d: Include ACPI devices in iommu=pt iommu/vt-d: Finally enable translation for non-PCI devices iommu/vt-d: Remove to_pci_dev() in intel_map_page() iommu/vt-d: Remove pdev from intel_iommu_attach_device() iommu/vt-d: Remove pdev from iommu_no_mapping() iommu/vt-d: Make domain_add_dev_info() take struct device iommu/vt-d: Make domain_remove_one_dev_info() take struct device iommu/vt-d: Rename 'hwdev' variables to 'dev' now that that's the norm iommu/vt-d: Remove some pointless to_pci_dev() calls iommu/vt-d: Make get_valid_domain_for_dev() take struct device iommu/vt-d: Make iommu_should_identity_map() take struct device iommu/vt-d: Handle RMRRs for non-PCI devices iommu/vt-d: Make get_domain_for_dev() take struct device iommu/vt-d: Make domain_context_mapp{ed,ing}() take struct device iommu/vt-d: Make device_to_iommu() cope with non-PCI devices ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
Pull hwmon updates from Jean Delvare: "This includes a number of driver conversions to devm_hwmon_device_register_with_groups, a few cleanups, and support for the ITE IT8623E" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (it87) Add support for IT8623E hwmon: (it87) Fix IT8603E define name hwmon: (lm90) Convert to use hwmon_device_register_with_groups hwmon: (lm90) Create all sysfs groups in one call hwmon: (lm90) Always use the dev variable in the probe function hwmon: (lm90) Create most optional attributes with sysfs_create_group hwmon: Avoid initializing the same field twice hwmon: (pc87360) Avoid initializing the same field twice hwmon: (lm80) Convert to use devm_hwmon_device_register_with_groups hwmon: (adm1021) Convert to use devm_hwmon_device_register_with_groups hwmon: (lm63) Avoid initializing the same field twice hwmon: (lm63) Convert to use devm_hwmon_device_register_with_groups hwmon: (lm63) Create all sysfs groups in one call hwmon: (lm63) Introduce 'dev' variable to point to client->dev hwmon: (lm63) Add additional sysfs group for temp2_type attribute hwmon: (f71805f) Fix author's address
-
git://git.linaro.org/people/mike.turquette/linux由 Linus Torvalds 提交于
Pull clock framework changes from Mike Turquette: "The clock framework changes for 3.15 look similar to past pull requests. Mostly clock driver updates, more Device Tree support in the form of common functions useful across platforms and a handful of features and fixes to the framework core" * tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: shmobile: fix setting paretn clock rate clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1 clk: Fix minor errors in of_clk_init() function comments clk: reverse default clk provider initialization order in of_clk_init() clk: sirf: update copyright years to 2014 clk: mmp: try to use closer one when do round rate clk: mmp: fix the wrong calculation formula clk: mmp: fix wrong mask when calculate denominator clk: st: Adds quadfs clock binding clk: st: Adds clockgen-vcc and clockgen-mux clock binding clk: st: Adds clockgen clock binding clk: st: Adds divmux and prediv clock binding clk: st: Support for A9 MUX clocks clk: st: Support for ClockGenA9/DDR/GPU clk: st: Support for QUADFS inside ClockGenB/C/D/E/F clk: st: Support for VCC-mux and MUX clocks clk: st: Support for PLLs inside ClockGenA(s) clk: st: Support for DIVMUX and PreDiv Clocks clk: support hardware-specific debugfs entries clk: s2mps11: Use of_get_child_by_name ...
-
由 Linus Torvalds 提交于
Merge tag 'pwm/for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The legacy HAVE_PWM Kconfig symbol is finally being retired. Thanks a lot to Sascha Hauer for doing that. Three new drivers are added: Freescale FTM, Cirrus Logic CLPS711X and Intel Low Power Subsystem. An assortment of fixes and cleanups rounds things off for this release cycle" * tag 'pwm/for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: pxa: Constify OF match table pwm: pxa: Fix typo "pwm" -> "PWM" Revert "pwm: pxa: Use of_match_ptr()" pwm: add support for Intel Low Power Subsystem PWM pwm: Add CLPS711X PWM support pwm: atmel: correct CDTY calculation pwm: atmel: Fix polarity handling Documentation: Add device tree bindings for Freescale FTM PWM. pwm: Add Freescale FTM PWM driver support pwm: pxa: Use of_match_ptr() pwm: samsung: Use SIMPLE_DEV_PM_OPS macro pwm: renesas-tpu: Add dependency on HAS_IOMEM pwm: Remove obsolete HAVE_PWM Kconfig symbol
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC sh driver change from Arnd Bergmann: "The drivers/sh subdirectory used to get merged through the SH architecture tree, but things are in flux there and some of the drivers are shared with ARM shmobile, we have picked it up for the time being. There is only one trivial patch from Laurent Pinchart this time" * tag 'sh-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: sh: intc: Enable driver compilation with COMPILE_TEST
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC board changes from Arnd Bergmann: "As we continue to replace board files with device tree descriptions, this part of the ARM support is getting smaller. We have basically just defconfig changes here this time, and a significant number of Renesas shmobile changes, as Renesas is still in the process of deprecating board file support" * tag 'boards-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) ARM: enable fhandle in multi_v7_defconfig ARM: tegra: enable fhandle in tegra_defconfig ARM: update multi_v7_defconfig for Tegra ARM: add Marvell Dove and some drivers to multi_v7 defconfig ARM: fix duplicate symbols in multi_v5_defconfig ARM: pxa: add gpio keys information ARM: tegra: defconfig updates ARM: config: keystone: enable AEMIF/NAND support ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig ARM: config: Add mvebu_v5_defconfig ARM: config: Add a multi_v5_defconfig ARM: shmobile: r7s72100: update defconfig for I2C usage ARM: shmobile: Remove Lager DT reference legacy clock bits ARM: shmobile: Remove Koelsch DT reference legacy clock bits ARM: shmobile: Remove KZM9D board code ARM: mvebu: update defconfigs for Armada 375 and 38x ARM: dove: Enable watchdog support in the defconfig ARM: mvebu: Enable watchdog support in defconfig ARM: config: keystone: enable led support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC specific changes from Arnd Bergmann: "Lots of changes specific to one of the SoC families. Some that stick out are: - mach-qcom gains new features, most importantly SMP support for the newer chips (Stephen Boyd, Rohit Vaswani) - mvebu gains support for three new SoCs: Armada 375, 380 and 385 (Thomas Petazzoni and Free-electrons team) - SMP support for Rockchips (Heiko Stübner) - Lots of i.MX changes (Shawn Guo) - Added support for BCM5301x SoC (Hauke Mehrtens) - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn and Sebastian Hesselbarth doing the final part of a long journey) - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd Bergmann)" * tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits) ARM: sunxi: Select HAVE_ARM_ARCH_TIMER ARM: cache-tauros2: remove ARMv6 code ARM: mvebu: don't select CONFIG_NEON ARM: davinci: fix DT booting with default defconfig ARM: configs: bcm_defconfig: enable bcm590xx regulator support ARM: davinci: remove tnetv107x support MAINTAINERS: Update ARM STi maintainers ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE ARM: bcm21664: Add board support. ARM: sunxi: Add the new watchog compatibles to the reboot code ARM: enable ARM_HAS_SG_CHAIN for multiplatform ARM: davinci: remove da8xx_omapl_defconfig ARM: davinci: da8xx: fix multiple watchdog device registration ARM: davinci: add da8xx specific configs to davinci_all_defconfig ARM: davinci: enable da8xx build concurrently with older devices ARM: BCM5301X: workaround suppress fault ARM: BCM5301X: add early debugging support ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU ARM: mach-bcm: Remove GENERIC_TIME ARM: shmobile: APMU: Fix warnings due to improper printk formats ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC non-critical bug fixes from Arnd Bergmann: "Lots of isolated bug fixes that were not found to be important enough to be submitted before the merge window or backported into stable kernels. The vast majority of these came out of Arnd's randconfig testing and just prevents running into build-time bugs in configurations that we do not care about in practice" * tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: at91: fix a typo ARM: moxart: fix CPU selection ARM: tegra: fix board DT pinmux setup ARM: nspire: Fix compiler warning IXP4xx: Fix DMA masks. Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation" IXP4xx: Fix Goramo Multilink GPIO conversion. Revert "ARM: ixp4xx: fix gpio rework" ARM: tegra: make debug_ll code build for ARMv6 ARM: sunxi: fix build for THUMB2_KERNEL ARM: exynos: add missing include of linux/module.h ARM: exynos: fix l2x0 saved regs handling ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK ARM: samsung: select ATAGS where necessary ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic ARM: samsung: allow serial driver to be disabled ARM: s5pv210: enable IDE support in MACH_TORBRECK ARM: s5p64x0: fix building with only one soc type ARM: s3c64xx: select power domains only when used ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1 ...
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM changes from Russell King: - Perf updates from Will Deacon: - Support for Qualcomm Krait processors (run perf on your phone!) - Support for Cortex-A12 (run perf stat on your FPGA!) - Support for perf_sample_event_took, allowing us to automatically decrease the sample rate if we can't handle the PMU interrupts quickly enough (run perf record on your FPGA!). - Basic uprobes support from David Long: This patch series adds basic uprobes support to ARM. It is based on patches developed earlier by Rabin Vincent. That approach of adding hooks into the kprobes instruction parsing code was not well received. This approach separates the ARM instruction parsing code in kprobes out into a separate set of functions which can be used by both kprobes and uprobes. Both kprobes and uprobes then provide their own semantic action tables to process the results of the parsing. - ARMv7M (microcontroller) updates from Uwe Kleine-König - OMAP DMA updates (recently added Vinod's Ack even though they've been sitting in linux-next for a few months) to reduce the reliance of omap-dma on the code in arch/arm. - SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan - Support for Cortex-A12 CPU - Align support for ARMv6 with ARMv7 so they can cooperate better in a single zImage. - Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support. - Removal of IRQ_DISABLED from various ARM files - Improved efficiency of virt_to_page() for single zImage - Patch from Ulf Hansson to permit runtime PM callbacks to be available for AMBA devices for suspend/resume as well. - Finally kill asm/system.h on ARM. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits) dmaengine: omap-dma: more consolidation of CCR register setup dmaengine: omap-dma: move IRQ handling to omap-dma dmaengine: omap-dma: move register read/writes into omap-dma.c ARM: omap: dma: get rid of 'p' allocation and clean up ARM: omap: move dma channel allocation into plat-omap code ARM: omap: dma: get rid of errata global ARM: omap: clean up DMA register accesses ARM: omap: remove almost-const variables ARM: omap: remove references to disable_irq_lch dmaengine: omap-dma: cleanup errata 3.3 handling dmaengine: omap-dma: provide register read/write functions dmaengine: omap-dma: use cached CCR value when enabling DMA dmaengine: omap-dma: move barrier to omap_dma_start_desc() dmaengine: omap-dma: move clnk_ctrl setting to preparation functions dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers dmaengine: omap-dma: consolidate clearing channel status register dmaengine: omap-dma: move CCR buffering disable errata out of the fast path dmaengine: omap-dma: provide register definitions dmaengine: omap-dma: consolidate setup of CCR dmaengine: omap-dma: consolidate setup of CSDP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel由 Linus Torvalds 提交于
Pull Hexagon updates from Richard Kuo: "Mostly cleanups for compilation with allmodconfig and some other miscellaneous fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel: Hexagon: update CR year for elf.h Hexagon: remove SP macro Hexagon: set ELF_EXEC_PAGESIZE to PAGE_SIZE Hexagon: set the e_flags in user regset view for core dumps Hexagon: fix atomic_set Hexagon: add screen_info for VGA_CONSOLE hexagon: correct type on pgd copy smp, hexagon: kill SMP single function call interrupt arch: hexagon: include: asm: add generic macro 'mmiowb' in "io.h" arch: hexagon: kernel: hexagon_ksyms.c: export related symbols which various modules need arch: hexagon: kernel: reset.c: use function pointer instead of function for pm_power_off and export it arch: hexagon: include: asm: add "vga.h" in Kbuild arch: hexagon: include: asm: Kbuild: add generic "serial.h" in Kbuild arch: hexagon: include: uapi: asm: setup.h add swith macro __KERNEL__ arch: hexagon: include: asm: add prefix "hvm[ci]_" for all enum members in "hexagon_vm.h" arch: hexagon: Kconfig: add HAVE_DMA_ATTR in Kconfig and remove "linux/dma-mapping.h" from "asm/dma-mapping.h" arch: hexagon: kernel: add export symbol function __delay() hexagon: include: asm: kgdb: extend DBG_MAX_REG_NUM for "cs0/1" hexagon: kernel: kgdb: include related header for pass compiling. hexagon: kernel: remove useless variables 'dn', 'r' and 'err' in time_init_deferred() in "time.c"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
Pull m68k fixes from Greg Ungerer: "Just a couple of fixes. Clean up compile warnings by using correct types in function args, and clean out the removed CONFIG_MTD_PARTITIONS" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix arg types for outs* functions m68k : Kill CONFIG_MTD_PARTITIONS
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull exynos media updates from Mauro Carvalho Chehab: "These are the remaining patches I have for the merge windows. It basically adds a new sensor and adds the needed DT bits for it to work" * 'topic/exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] s5p-fimc: Remove reference to outdated macro [media] s5p-jpeg: Fix broken indentation in jpeg-regs.h [media] exynos4-is: Add the FIMC-IS ISP capture DMA driver [media] exynos4-is: Add support for asynchronous subdevices registration [media] exynos4-is: Add clock provider for the SCLK_CAM clock outputs [media] exynos4-is: Use external s5k6a3 sensor driver [media] V4L: s5c73m3: Add device tree support [media] V4L: Add driver for s5k6a3 image sensor [media] Documentation: devicetree: Update Samsung FIMC DT binding [media] Documentation: dt: Add binding documentation for S5C73M3 camera [media] Documentation: dt: Add binding documentation for S5K6A3 image sensor
-