- 11 5月, 2015 1 次提交
-
-
由 Eric W. Biederman 提交于
In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 4月, 2015 1 次提交
-
-
We should not consult skb->sk for output decisions in xmit recursion levels > 0 in the stack. Otherwise local socket settings could influence the result of e.g. tunnel encapsulation process. ipv6 does not conform with this in three places: 1) ip6_fragment: we do consult ipv6_npinfo for frag_size 2) sk_mc_loop in ipv6 uses skb->sk and checks if we should loop the packet back to the local socket 3) ip6_skb_dst_mtu could query the settings from the user socket and force a wrong MTU Furthermore: In sk_mc_loop we could potentially land in WARN_ON(1) if we use a PF_PACKET socket ontop of an IPv6-backed vxlan device. Reuse xmit_recursion as we are currently only interested in protecting tunnel devices. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2015 1 次提交
-
-
由 Christoph Hellwig 提交于
struct kiocb now is a generic I/O container, so move it to fs.h. Also do a #include diet for aio.h while we're at it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 21 3月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
sk_ack_backlog & sk_max_ack_backlog were 16bit fields, meaning listen() backlog was limited to 65535. It is time to increase the width to allow much bigger backlog, if admins change /proc/sys/net/core/somaxconn & /proc/sys/net/ipv4/tcp_max_syn_backlog default values. Tested: echo 5000000 >/proc/sys/net/core/somaxconn echo 5000000 >/proc/sys/net/ipv4/tcp_max_syn_backlog Ran a SYNFLOOD test against a listener using listen(fd, 5000000) myhost~# grep request_sock_TCP /proc/slabinfo request_sock_TCP 4185642 4411940 304 13 1 : tunables 54 27 8 : slabdata 339380 339380 0 Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 3月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
We have many places where we want to check if a socket is not a timewait or request socket. Use a helper to avoid hard coding this. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2015 3 次提交
-
-
由 Eric Dumazet 提交于
sock_edemux() & sock_gen_put() should be ready to cope with request socks. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Having to say > #ifdef CONFIG_NET_NS > struct net *net; > #endif in structures is a little bit wordy and a little bit error prone. Instead it is possible to say: > typedef struct { > #ifdef CONFIG_NET_NS > struct net *net; > #endif > } possible_net_t; And then in a header say: > possible_net_t net; Which is cleaner and easier to use and easier to test, as the possible_net_t is always there no matter what the compile options. Further this allows read_pnet and write_pnet to be functions in all cases which is better at catching typos. This change adds possible_net_t, updates the definitions of read_pnet and write_pnet, updates optional struct net * variables that write_pnet uses on to have the type possible_net_t, and finally fixes up the b0rked users of read_pnet and write_pnet. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
hold_net and release_net were an idea that turned out to be useless. The code has been disabled since 2008. Kill the code it is long past due. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
A long standing problem in netlink socket dumps is the use of kernel socket addresses as cookies. 1) It is a security concern. 2) Sockets can be reused quite quickly, so there is no guarantee a cookie is used once and identify a flow. 3) request sock, establish sock, and timewait socks for a given flow have different cookies. Part of our effort to bring better TCP statistics requires to switch to a different allocator. In this patch, I chose to use a per network namespace 64bit generator, and to use it only in the case a socket needs to be dumped to netlink. (This might be refined later if needed) Note that I tried to carry cookies from request sock, to establish sock, then timewait sockets. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Eric Salo <salo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2015 1 次提交
-
-
由 Ying Xue 提交于
After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 3月, 2015 3 次提交
-
-
由 Eyal Birger 提交于
Commit 97775007 ("af_packet: add interframe drop cmsg (v6)") unionized skb->mark and skb->dropcount in order to allow recording of the socket drop count while maintaining struct sk_buff size. skb->dropcount was introduced since there was no available room in skb->cb[] in packet sockets. However, its introduction led to the inability to export skb->mark, or any other aliased field to userspace if so desired. Moving the dropcount metric to skb->cb[] eliminates this problem at the expense of 4 bytes less in skb->cb[] for protocol families using it. Signed-off-by: NEyal Birger <eyal.birger@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eyal Birger 提交于
As part of an effort to move skb->dropcount to skb->cb[], use a common function in order to set dropcount in struct sk_buff. Signed-off-by: NEyal Birger <eyal.birger@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eyal Birger 提交于
As part of an effort to move skb->dropcount to skb->cb[] use a common macro in protocol families using skb->cb[] for ancillary data to validate available room in skb->cb[]. Signed-off-by: NEyal Birger <eyal.birger@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2015 1 次提交
-
-
由 Vladimir Davydov 提交于
Move memcg_socket_limit_enabled decrement to tcp_destroy_cgroup (called from memcg_destroy_kmem -> mem_cgroup_sockets_destroy) and zap a bunch of wrapper functions. Although this patch moves static keys decrement from __mem_cgroup_free to mem_cgroup_css_free, it does not introduce any functional changes, because the keys are incremented on setting the limit (tcp or kmem), which can only happen after successful mem_cgroup_css_online. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Cc: Glauber Costa <glommer@parallels.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David S. Miller <davem@davemloft.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 2月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
Receive Flow Steering is a nice solution but suffers from hash collisions when a mix of connected and unconnected traffic is received on the host, when flow hash table is populated. Also, clearing flow in inet_release() makes RFS not very good for short lived flows, as many packets can follow close(). (FIN , ACK packets, ...) This patch extends the information stored into global hash table to not only include cpu number, but upper part of the hash value. I use a 32bit value, and dynamically split it in two parts. For host with less than 64 possible cpus, this gives 6 bits for the cpu number, and 26 (32-6) bits for the upper part of the hash. Since hash bucket selection use low order bits of the hash, we have a full hash match, if /proc/sys/net/core/rps_sock_flow_entries is big enough. If the hash found in flow table does not match, we fallback to RPS (if it is enabled for the rxqueue). This means that a packet for an non connected flow can avoid the IPI through a unrelated/victim CPU. This also means we no longer have to clear the table at socket close time, and this helps short lived flows performance. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 2月, 2015 1 次提交
-
-
由 Al Viro 提交于
patch is actually smaller than it seems to be - most of it is unindenting the inner loop body in tcp_sendmsg() itself... the bit in tcp_input.c is going to get reverted very soon - that's what memcpy_from_msg() will become, but not in this commit; let's keep it reasonably contained... There's one potentially subtle change here: in case of short copy from userland, mainline tcp_send_syn_data() discards the skb it has allocated and falls back to normal path, where we'll send as much as possible after rereading the same data again. This patch trims SYN+data skb instead - that way we don't need to copy from the same place twice. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 03 2月, 2015 1 次提交
-
-
由 Willem de Bruijn 提交于
Tx timestamps are looped onto the error queue on top of an skb. This mechanism leaks packet headers to processes unless the no-payload options SOF_TIMESTAMPING_OPT_TSONLY is set. Add a sysctl that optionally drops looped timestamp with data. This only affects processes without CAP_NET_RAW. The policy is checked when timestamps are generated in the stack. It is possible for timestamps with data to be reported after the sysctl is set, if these were queued internally earlier. No vulnerability is immediately known that exploits knowledge gleaned from packet headers, but it may still be preferable to allow administrators to lock down this path at the cost of possible breakage of legacy applications. Signed-off-by: NWillem de Bruijn <willemb@google.com> ---- Changes (v1 -> v2) - test socket CAP_NET_RAW instead of capable(CAP_NET_RAW) (rfc -> v1) - document the sysctl in Documentation/sysctl/net.txt - fix access control race: read .._OPT_TSONLY only once, use same value for permission check and skb generation. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2015 1 次提交
-
-
由 Christoph Hellwig 提交于
The sock_iocb structure is allocate on stack for each read/write-like operation on sockets, and contains various fields of which only the embedded msghdr and sometimes a pointer to the scm_cookie is ever used. Get rid of the sock_iocb and put a msghdr directly on the stack and pass the scm_cookie explicitly to netlink_mmap_sendmsg. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2014 1 次提交
-
-
由 Johannes Weiner 提交于
Memory is internally accounted in bytes, using spinlock-protected 64-bit counters, even though the smallest accounting delta is a page. The counter interface is also convoluted and does too many things. Introduce a new lockless word-sized page counter API, then change all memory accounting over to it. The translation from and to bytes then only happens when interfacing with userspace. The removed locking overhead is noticable when scaling beyond the per-cpu charge caches - on a 4-socket machine with 144-threads, the following test shows the performance differences of 288 memcgs concurrently running a page fault benchmark: vanilla: 18631648.500498 task-clock (msec) # 140.643 CPUs utilized ( +- 0.33% ) 1,380,638 context-switches # 0.074 K/sec ( +- 0.75% ) 24,390 cpu-migrations # 0.001 K/sec ( +- 8.44% ) 1,843,305,768 page-faults # 0.099 M/sec ( +- 0.00% ) 50,134,994,088,218 cycles # 2.691 GHz ( +- 0.33% ) <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 8,049,712,224,651 instructions # 0.16 insns per cycle ( +- 0.04% ) 1,586,970,584,979 branches # 85.176 M/sec ( +- 0.05% ) 1,724,989,949 branch-misses # 0.11% of all branches ( +- 0.48% ) 132.474343877 seconds time elapsed ( +- 0.21% ) lockless: 12195979.037525 task-clock (msec) # 133.480 CPUs utilized ( +- 0.18% ) 832,850 context-switches # 0.068 K/sec ( +- 0.54% ) 15,624 cpu-migrations # 0.001 K/sec ( +- 10.17% ) 1,843,304,774 page-faults # 0.151 M/sec ( +- 0.00% ) 32,811,216,801,141 cycles # 2.690 GHz ( +- 0.18% ) <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 9,999,265,091,727 instructions # 0.30 insns per cycle ( +- 0.10% ) 2,076,759,325,203 branches # 170.282 M/sec ( +- 0.12% ) 1,656,917,214 branch-misses # 0.08% of all branches ( +- 0.55% ) 91.369330729 seconds time elapsed ( +- 0.45% ) On top of improved scalability, this also gets rid of the icky long long types in the very heart of memcg, which is great for 32 bit and also makes the code a lot more readable. Notable differences between the old and new API: - res_counter_charge() and res_counter_charge_nofail() become page_counter_try_charge() and page_counter_charge() resp. to match the more common kernel naming scheme of try_do()/do() - res_counter_uncharge_until() is only ever used to cancel a local counter and never to uncharge bigger segments of a hierarchy, so it's replaced by the simpler page_counter_cancel() - res_counter_set_limit() is replaced by page_counter_limit(), which expects its callers to serialize against themselves - res_counter_memparse_write_strategy() is replaced by page_counter_limit(), which rounds down to the nearest page size - rather than up. This is more reasonable for explicitely requested hard upper limits. - to keep charging light-weight, page_counter_try_charge() charges speculatively, only to roll back if the result exceeds the limit. Because of this, a failing bigger charge can temporarily lock out smaller charges that would otherwise succeed. The error is bounded to the difference between the smallest and the biggest possible charge size, so for memcg, this means that a failing THP charge can send base page charges into reclaim upto 2MB (4MB) before the limit would have been reached. This should be acceptable. [akpm@linux-foundation.org: add includes for WARN_ON_ONCE and memparse] [akpm@linux-foundation.org: add includes for WARN_ON_ONCE, memparse, strncmp, and PAGE_SIZE] Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NMichal Hocko <mhocko@suse.cz> Acked-by: NVladimir Davydov <vdavydov@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 11月, 2014 1 次提交
-
-
由 Daniel Borkmann 提交于
Commit e1bd95bf ("crypto: algif - zeroize IV buffer") and 2a6af25b ("crypto: algif - zeroize message digest buffer") added memzero_explicit() calls on buffers that are later on passed back to sock_kfree_s(). This is a discussed follow-up that, instead, extends the sock API and adds sock_kzfree_s(), which internally uses kzfree() instead of kfree() for passing the buffers back to slab. Having sock_kzfree_s() allows to keep the changes more minimal by just having a drop-in replacement instead of adding memzero_explicit() calls everywhere before sock_kfree_s(). In kzfree(), the compiler is not allowed to optimize the memset() away and thus there's no need for memzero_explicit(). Both, sock_kfree_s() and sock_kzfree_s() are wrappers for __sock_kfree_s() and call into kfree() resp. kzfree(); here, __sock_kfree_s() needs to be explicitly inlined as we want the compiler to optimize the call and condition away and thus it produces e.g. on x86_64 the _same_ assembler output for sock_kfree_s() before and after, and thus also allows for avoiding code duplication. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 20 11月, 2014 1 次提交
-
-
由 Al Viro 提交于
no callers since 3.0 Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 12 11月, 2014 2 次提交
-
-
由 Joe Perches 提交于
Use the more common dynamic_debug capable net_dbg_ratelimited and remove the LIMIT_NETDEBUG macro. All messages are still ratelimited. Some KERN_<LEVEL> uses are changed to KERN_DEBUG. This may have some negative impact on messages that were emitted at KERN_INFO that are not not enabled at all unless DEBUG is defined or dynamic_debug is enabled. Even so, these messages are now _not_ emitted by default. This also eliminates the use of the net_msg_warn sysctl "/proc/sys/net/core/warnings". For backward compatibility, the sysctl is not removed, but it has no function. The extern declaration of net_msg_warn is removed from sock.h and made static in net/core/sysctl_net_core.c Miscellanea: o Update the sysctl documentation o Remove the embedded uses of pr_fmt o Coalesce format fragments o Realign arguments Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Alternative to RPS/RFS is to use hardware support for multiple queues. Then split a set of million of sockets into worker threads, each one using epoll() to manage events on its own socket pool. Ideally, we want one thread per RX/TX queue/cpu, but we have no way to know after accept() or connect() on which queue/cpu a socket is managed. We normally use one cpu per RX queue (IRQ smp_affinity being properly set), so remembering on socket structure which cpu delivered last packet is enough to solve the problem. After accept(), connect(), or even file descriptor passing around processes, applications can use : int cpu; socklen_t len = sizeof(cpu); getsockopt(fd, SOL_SOCKET, SO_INCOMING_CPU, &cpu, &len); And use this information to put the socket into the right silo for optimal performance, as all networking stack should run on the appropriate cpu, without need to send IPI (RPS/RFS). Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 11月, 2014 1 次提交
-
-
由 Joe Perches 提交于
It's unused now, just delete it. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 10月, 2014 1 次提交
-
-
由 Peter Zijlstra 提交于
WARNING: CPU: 1 PID: 1744 at kernel/sched/core.c:7104 __might_sleep+0x58/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff81070e10>] prepare_to_wait+0x50 /0xa0 [<ffffffff8105bc38>] __might_sleep+0x58/0x90 [<ffffffff8148c671>] lock_sock_nested+0x31/0xb0 [<ffffffff81498aaa>] sk_stream_wait_memory+0x18a/0x2d0 Which is a false positive because sk_wait_event() will already have TASK_RUNNING at that point if it would've gone through schedule_timeout(). So annotate with sched_annotate_sleep(); which goes away on !DEBUG builds. Reported-by: NIlya Dryomov <ilya.dryomov@inktank.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140924082242.524407432@infradead.org Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: netdev@vger.kernel.org Cc: tglx@linutronix.de Cc: ilya.dryomov@inktank.com Cc: umgwanakikbuti@gmail.com Cc: oleg@redhat.com Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 28 9月, 2014 1 次提交
-
-
由 Dan Williams 提交于
Per commit "77873803 net_dma: mark broken" net_dma is no longer used and there is no plan to fix it. This is the mechanical removal of bits in CONFIG_NET_DMA ifdef guards. Reverting the remainder of the net_dma induced changes is deferred to subsequent patches. Marked for stable due to Roman's report of a memory leak in dma_pin_iovec_pages(): https://lkml.org/lkml/2014/9/3/177 Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: David Whipple <whipple@securedatainnovations.ch> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: <stable@vger.kernel.org> Reported-by: NRoman Gushchin <klamm@yandex-team.ru> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 10 9月, 2014 1 次提交
-
-
由 Willem de Bruijn 提交于
Few packets have timestamping enabled. Exit sock_tx_timestamp quickly in this common case. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 9月, 2014 3 次提交
-
-
由 Alexander Duyck 提交于
Since sock_efree and sock_demux are essentially the same code for non-TCP sockets and the case where CONFIG_INET is not defined we can combine the code or replace the call to sock_edemux in several spots. As a result we can avoid a bit of unnecessary code or code duplication. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The phy timestamping takes a different path than the regular timestamping does in that it will create a clone first so that the packets needing to be timestamped can be placed in a queue, or the context block could be used. In order to support these use cases I am pulling the core of the code out so it can be used in other drivers beyond just phy devices. In addition I have added a destructor named sock_efree which is meant to provide a simple way for dropping the reference to skb exceptions that aren't part of either the receive or send windows for the socket, and I have removed some duplication in spots where this destructor could be used in place of sock_edemux. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
The timestamping API has separate bits for generating and reporting timestamps. A software timestamp should only be reported for a packet when the packet has the relevant generation flag (SKBTX_..) set and the socket has reporting bit SOF_TIMESTAMPING_SOFTWARE set. The second check was accidentally removed. Reinstitute the original behavior. Tested: Without this patch, Documentation/networking/txtimestamp reports timestamps regardless of whether SOF_TIMESTAMPING_SOFTWARE is set. After the patch, it only reports them when the flag is set. Fixes: f24b9be5 ("net-timestamp: extend SCM_TIMESTAMPING ancillary data struct") Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 9月, 2014 1 次提交
-
-
由 Willem de Bruijn 提交于
sk->sk_error_queue is dequeued in four locations. All share the exact same logic. Deduplicate. Also collapse the two critical sections for dequeue (at the top of the recv handler) and signal (at the bottom). This moves signal generation for the next packet forward, which should be harmless. It also changes the behavior if the recv handler exits early with an error. Previously, a signal for follow-up packets on the errqueue would then not be scheduled. The new behavior, to always signal, is arguably a bug fix. For rxrpc, the change causes the same function to be called repeatedly for each queued packet (because the recv handler == sk_error_report). It is likely that all packets will fail for the same reason (e.g., memory exhaustion). This code runs without sk_lock held, so it is not safe to trust that sk->sk_err is immutable inbetween releasing q->lock and the subsequent test. Introduce int err just to avoid this potential race. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2014 1 次提交
-
-
由 Neal Cardwell 提交于
Make sure we use the correct address-family-specific function for handling MTU reductions from within tcp_release_cb(). Previously AF_INET6 sockets were incorrectly always using the IPv6 code path when sometimes they were handling IPv4 traffic and thus had an IPv4 dst. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Diagnosed-by: NWillem de Bruijn <willemb@google.com> Fixes: 563d34d0 ("tcp: dont drop MTU reduction indications") Reviewed-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 8月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
sock_tx_timestamp() should not ignore initial *tx_flags value, as TCP stack can store SKBTX_SHARED_FRAG in it. Also first argument (struct sock *) can be const. Signed-off-by: NEric Dumazet <edumazet@google.com> Fixes: 4ed2d765 ("net-timestamp: TCP timestamping") Cc: Willem de Bruijn <willemb@google.com> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 8月, 2014 3 次提交
-
-
由 Willem de Bruijn 提交于
Datagrams timestamped on transmission can coexist in the kernel stack and be reordered in packet scheduling. When reading looped datagrams from the socket error queue it is not always possible to unique correlate looped data with original send() call (for application level retransmits). Even if possible, it may be expensive and complex, requiring packet inspection. Introduce a data-independent ID mechanism to associate timestamps with send calls. Pass an ID alongside the timestamp in field ee_data of sock_extended_err. The ID is a simple 32 bit unsigned int that is associated with the socket and incremented on each send() call for which software tx timestamp generation is enabled. The feature is enabled only if SOF_TIMESTAMPING_OPT_ID is set, to avoid changing ee_data for existing applications that expect it 0. The counter is reset each time the flag is reenabled. Reenabling does not change the ID of already submitted data. It is possible to receive out of order IDs if the timestamp stream is not quiesced first. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
sk_flags is reaching its limit. New timestamping options will not fit. Move all of them into a new field sk->sk_tsflags. Added benefit is that this removes boilerplate code to convert between SOF_TIMESTAMPING_.. and SOCK_TIMESTAMPING_.. in getsockopt/setsockopt. SOCK_TIMESTAMPING_RX_SOFTWARE is also used to toggle the receive timestamp logic (netstamp_needed). That can be simplified and this last key removed, but will leave that for a separate patch. Signed-off-by: NWillem de Bruijn <willemb@google.com> ---- The u16 in sock can be moved into a 16-bit hole below sk_gso_max_segs, though that scatters tstamp fields throughout the struct. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Applications that request kernel tx timestamps with SO_TIMESTAMPING read timestamps as recvmsg() ancillary data. The response is defined implicitly as timespec[3]. 1) define struct scm_timestamping explicitly and 2) add support for new tstamp types. On tx, scm_timestamping always accompanies a sock_extended_err. Define previously unused field ee_info to signal the type of ts[0]. Introduce SCM_TSTAMP_SND to define the existing behavior. The reception path is not modified. On rx, no struct similar to sock_extended_err is passed along with SCM_TIMESTAMPING. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 7月, 2014 1 次提交
-
-
由 Willem de Bruijn 提交于
The SO_TIMESTAMPING API defines three types of timestamps: software, hardware in raw format (hwtstamp) and hardware converted to system format (syststamp). The last has been deprecated in favor of combining hwtstamp with a PTP clock driver. There are no active users in the kernel. The option was device driver dependent. If set, but without hardware support, the correct behavior is to return zero in the relevant field in the SCM_TIMESTAMPING ancillary message. Without device drivers implementing the option, this field is effectively always zero. Remove the internal plumbing to dissuage new drivers from implementing the feature. Keep the SOF_TIMESTAMPING_SYS_HARDWARE flag, however, to avoid breaking existing applications that request the timestamp. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 7月, 2014 1 次提交
-
-
由 Sorin Dumitru 提交于
It hasn't been used since commit 0fd7bac6(net: relax rcvbuf limits). Signed-off-by: NSorin Dumitru <sorin@returnze.ro> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 7月, 2014 1 次提交
-
-
由 David Held 提交于
Many multicast sources can have the same port which can result in a very large list when hashing by port only. Hash by address and port instead if this is the case. This makes multicast more similar to unicast. On a 24-core machine receiving from 500 multicast sockets on the same port, before this patch 80% of system CPU was used up by spin locking and only ~25% of packets were successfully delivered. With this patch, all packets are delivered and kernel overhead is ~8% system CPU on spinlocks. Signed-off-by: NDavid Held <drheld@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 7月, 2014 1 次提交
-
-
由 Tom Herbert 提交于
For a connected socket we can precompute the flow hash for setting in skb->hash on output. This is a performance advantage over calculating the skb->hash for every packet on the connection. The computation is done using the common hash algorithm to be consistent with computations done for packets of the connection in other states where thers is no socket (e.g. time-wait, syn-recv, syn-cookies). This patch adds sk_txhash to the sock structure. inet_set_txhash and ip6_set_txhash functions are added which are called from points in TCP and UDP where socket moves to established state. skb_set_hash_from_sk is a function which sets skb->hash from the sock txhash value. This is called in UDP and TCP transmit path when transmitting within the context of a socket. Tested: ran super_netperf with 200 TCP_RR streams over a vxlan interface (in this case skb_get_hash called on every TX packet to create a UDP source port). Before fix: 95.02% CPU utilization 154/256/505 90/95/99% latencies 1.13042e+06 tps Time in functions: 0.28% skb_flow_dissect 0.21% __skb_get_hash After fix: 94.95% CPU utilization 156/254/485 90/95/99% latencies 1.15447e+06 Neither __skb_get_hash nor skb_flow_dissect appear in perf Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-