- 02 3月, 2018 1 次提交
-
-
由 Kirill Tkhai 提交于
hwsim_netgroup counter is declarated as int, and it is incremented every time a new net is created. After sizeof(int) net are created, it will overflow, and different net namespaces will have the same identifier. This patch fixes the problem by introducing IDA instead of int counter. IDA guarantees, all the net namespaces have the uniq identifier. Note, that after we do ida_simple_remove() in hwsim_exit_net(), and we destroy the ID, later there may be executed destroy_radio() from the workqueue. But destroy_radio() does not use the ID, so it's OK. Out of bounds of this patch, just as a report to wireless subsystem maintainer, destroy_radio() increaments hwsim_radios_generation without hwsim_radio_lock, so this may need one more patch to fix. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 27 2月, 2018 5 次提交
-
-
由 Felix Fietkau 提交于
Only works if the IV was stripped from packets. Create a smaller variant of ieee80211_rx_h_amsdu, which bypasses checks already done within the fast-rx context. In order to do so, update cfg80211's ieee80211_data_to_8023_exthdr() to take the offset between header and snap. Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Ilan Peer 提交于
As there is no support for updating an existing ADDBA session with a peer, we decline the request (while keeping the session active). However, in case that the timeout did not change, there is no need to decline the request, so modify the code to reply with status success in such a case (this is useful for interoperability with APs that send an ADDBA request update without changing the timeout value). Signed-off-by: NIlan Peer <ilan.peer@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Felix Fietkau 提交于
Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Felix Fietkau 提交于
When powersave is disabled for the interface, we can do fast-rx anyway. Signed-off-by: NFelix Fietkau <nbd@nbd.name> [fixed indentation on one line] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Felix Fietkau 提交于
Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 24 2月, 2018 18 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh. 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang. 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song. 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang. 5) Fix potential deadlocks in netfilter getsockopt() code paths, from Paolo Abeni. 6) Netfilter stackpointer size checks really are needed to validate user input, from Florian Westphal. 7) Missing timer init in x_tables, from Paolo Abeni. 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg. 9) When an ibmvnic device is brought down then back up again, it can be sent queue entries from a previous session, handle this properly instead of crashing. From Thomas Falcon. 10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman. 11) When we are dumping filters in cls_api, the output SKB is empty, and the filter we are dumping is too large for the space in the SKB, we should return -EMSGSIZE like other netlink dump operations do. Otherwise userland has no signal that is needs to increase the size of its read buffer. From Roman Kapl. 12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer. 13) Module refcount leak in netlink when a dump start fails, from Jason Donenfeld. 14) Handle sub-optimal GSO sizes better in TCP BBR congestion control, from Eric Dumazet. 15) Releasing bpf per-cpu arraymaps can take a long time, add a condtional scheduling point. From Eric Dumazet. 16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From Daniel Borkmann. 17) Fix page leak in gianfar driver, from Andy Spencer. 18) Missed clearing of estimator scratch buffer, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net_sched: gen_estimator: fix broken estimators based on percpu stats gianfar: simplify FCS handling and fix memory leak ipv6 sit: work around bogus gcc-8 -Wrestrict warning macvlan: fix use-after-free in macvlan_common_newlink() bpf, arm64: fix out of bounds access in tail call bpf, x64: implement retpoline for tail call rxrpc: Fix send in rxrpc_send_data_packet() net: aquantia: Fix error handling in aq_pci_probe() bpf: fix rcu lockdep warning for lpm_trie map_free callback bpf: add schedule points in percpu arrays management regulatory: add NUL to request alpha2 ibmvnic: Fix early release of login buffer net/smc9194: Remove bogus CONFIG_MAC reference net: ipv4: Set addr_type in hash_keys for forwarded case tcp_bbr: better deal with suboptimal GSO smsc75xx: fix smsc75xx_set_features() netlink: put module reference if dump start fails selftests/bpf/test_maps: exit child process without error in ENOMEM case selftests/bpf: update gitignore with test_libbpf_open selftests/bpf: tcpbpf_kern: use in6_* macros from glibc ..
-
由 Linus Torvalds 提交于
Merge branch 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris: - keys fixes via David Howells: "A collection of fixes for Linux keyrings, mostly thanks to Eric Biggers: - Fix some PKCS#7 verification issues. - Fix handling of unsupported crypto in X.509. - Fix too-large allocation in big_key" - Seccomp updates via Kees Cook: "These are fixes for the get_metadata interface that landed during -rc1. While the new selftest is strictly not a bug fix, I think it's in the same spirit of avoiding bugs" - an IMA build fix from Randy Dunlap * 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: integrity/security: fix digsig.c build error with header file KEYS: Use individual pages in big_key for crypto buffers X.509: fix NULL dereference when restricting key with unsupported_sig X.509: fix BUG_ON() when hash algorithm is unsupported PKCS#7: fix direct verification of SignerInfo signature PKCS#7: fix certificate blacklisting PKCS#7: fix certificate chain verification seccomp: add a selftest for get_metadata ptrace, seccomp: tweak get_metadata behavior slightly seccomp, ptrace: switch get_metadata types to arch independent
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: "arm64 and perf fixes: - build error when accessing MPIDR_HWID_BITMASK from .S - fix CTR_EL0 field definitions - remove/disable some kernel messages on user faults (unhandled signals, unimplemented syscalls) - fix kernel page fault in unwind_frame() with function graph tracing - fix perf sleeping while atomic errors when booting with ACPI" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix unwind_frame() for filtered out fn for function graph tracing arm64: Enforce BBM for huge IO/VMAP mappings arm64: perf: correct PMUVer probing arm_pmu: acpi: request IRQs up-front arm_pmu: note IRQs and PMUs per-cpu arm_pmu: explicitly enable/disable SPIs at hotplug arm_pmu: acpi: check for mismatched PPIs arm_pmu: add armpmu_alloc_atomic() arm_pmu: fold platform helpers into platform code arm_pmu: kill arm_pmu_platdata ARM: ux500: remove PMU IRQ bouncer arm64: __show_regs: Only resolve kernel symbols when running at EL1 arm64: Remove unimplemented syscall log message arm64: Disable unhandled signal log messages by default arm64: cpufeature: Fix CTR_EL0 field definitions arm64: uaccess: Formalise types for access_ok() arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips由 Linus Torvalds 提交于
Pull MIPS fix from James Hogan: "A single MIPS fix for mismatching struct compat_flock, resulting in bus errors starting Firefox on Debian 8 since 4.13" * tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: Drop spurious __unused in struct compat_flock
-
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk由 Linus Torvalds 提交于
Pull printk fixlet from Petr Mladek: "People expect to see the real pointer value for %px. Let's substitute '(null)' only for the other %p? format modifiers that need to deference the pointer" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: vsprintf: avoid misleading "(null)" for %px
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Two bugfixes, one v4.16 regression fix, and two documentation fixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Consider SCL GPIO optional i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula". i2c: bcm2835: Set up the rising/falling edge delays i2c: i801: Add missing documentation entries for Braswell and Kaby Lake i2c: designware: must wait for enable
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "These are mostly fixes for problems with merge window code. In addition we have one doc update (alua) and two dead code removals (aiclib and octogon) a spurious assignment removal (csiostor) and a performance improvement for storvsc involving better interrupt spreading and increasing the command per lun handling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla4xxx: skip error recovery in case of register disconnect. scsi: aacraid: fix shutdown crash when init fails scsi: qedi: Cleanup local str variable scsi: qedi: Fix truncation of CHAP name and secret scsi: qla2xxx: Fix incorrect handle for abort IOCB scsi: qla2xxx: Fix double free bug after firmware timeout scsi: storvsc: Increase cmd_per_lun for higher speed devices scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els() scsi: scsi_dh: Document alua_rtpg_queue() arguments scsi: Remove Makefile entry for oktagon files scsi: aic7xxx: remove aiclib.c scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion() scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo() scsi: sym53c8xx_2: iterator underflow in sym_getsync() scsi: bnx2fc: Fix check in SCSI completion handler for timed out request scsi: csiostor: remove redundant assignment to pointer 'ln' scsi: ufs: Enable quirk to ignore sending WRITE_SAME command scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info scsi: qla2xxx: Fix memory corruption during hba reset test scsi: mpt3sas: fix an out of bound write
-
由 Donald Sharp 提交于
For ages iproute2 has used `struct rtmsg` as the ancillary header for FIB rules and in the process set the protocol value to RTPROT_BOOT. Until ca56209a66 ("net: Allow a rule to track originating protocol") the kernel rules code ignored the protocol value sent from userspace and always returned 0 in notifications. To avoid incompatibility with existing iproute2, send the protocol as a new attribute. Fixes: cac56209 ("net: Allow a rule to track originating protocol") Signed-off-by: NDonald Sharp <sharpd@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A bunch of fixes for rc3: Exynos: - fixes for using monotonic timestamps - register definitions - removal of unused file ipu-v3L - minor changes - make some register arrays const+static - fix some leaks meson: - fix for vsync atomic: - fix for memory leak EDID parser: - add quirks for some more non-desktop devices - 6-bit panel fix. drm_mm: - fix a bug in the core drm mm hole handling cirrus: - fix lut loading regression Lastly there is a deadlock fix around runtime suspend for secondary GPUs. There was a deadlock between one thread trying to wait for a workqueue job to finish in the runtime suspend path, and the workqueue job it was waiting for in turn waiting for a runtime_get_sync to return. The fixes avoids it by not doing the runtime sync in the workqueue as then we always wait for all those tasks to complete before we runtime suspend" * tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm/tve200: fix kernel-doc documentation comment include drm/edid: quirk Sony PlayStation VR headset as non-desktop drm/edid: quirk Windows Mixed Reality headsets as non-desktop drm/edid: quirk Oculus Rift headsets as non-desktop drm/meson: fix vsync buffer update drm: Handle unexpected holes in color-eviction drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1 drm/exynos: remove exynos_drm_rotator.h drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions drm/exynos: fix comparison to bitshift when dealing with a mask drm/exynos: g2d: use monotonic timestamps drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle drm/amdgpu: Fix deadlock on runtime suspend drm/radeon: Fix deadlock on runtime suspend drm/nouveau: Fix deadlock on runtime suspend drm: Allow determining if current task is output poll worker ...
-
由 Willem de Bruijn 提交于
The packet fanout test generates UDP traffic and reads this with a pair of packet sockets, testing the various fanout algorithms. Avoid non-determinism from reading unrelated background traffic. Fanout decisions are made before unrelated packets can be dropped with a filter, so that is an insufficient strategy [*]. Run the packet socket tests in a network namespace, similar to msg_zerocopy. It it still good practice to install a filter on a packet socket before accepting traffic. Because this is example code, demonstrate that pattern. Open the socket initially bound to no protocol, install a filter, and only then bind to ETH_P_IP. Another source of non-determinism is hash collisions in FANOUT_HASH. The hash function used to select a socket in the fanout group includes the pseudorandom number hashrnd, which is not visible from userspace. To work around this, the test tries to find a pair of UDP source ports that do not collide. It gives up too soon (5 times, every 32 runs) and output is confusing. Increase tries to 20 and revise the error msg. [*] another approach would be to add a third socket to the fanout group and direct all unexpected traffic here. This is possible only when reimplementing methods like RR or HASH alongside this extra catch-all bucket, using the BPF fanout method. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Zero is being bit-wise or'd in a calculation twice; these are redundant and can be removed. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
pfifo_fast got percpu stats lately, uncovering a bug I introduced last year in linux-4.10. I missed the fact that we have to clear our temporary storage before calling __gnet_stats_copy_basic() in the case of percpu stats. Without this fix, rate estimators (tc qd replace dev xxx root est 1sec 4sec pfifo_fast) are utterly broken. Fixes: 1c0d32fd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf由 David S. Miller 提交于
Alexei Starovoitov says: ==================== pull-request: bpf 2018-02-22 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) two urgent fixes for bpf_tail_call logic for x64 and arm64 JITs, from Daniel. 2) cond_resched points in percpu array alloc/free paths, from Eric. 3) lockdep and other minor fixes, from Yonghong, Arnd, Anders, Li. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
if either or both of MSG_ZEROCOPY and SOCK_ZEROCOPY have not been specified, the rm->data.op_mmp_znotifier allocation will be skipped. In this case, it is invalid ot pass down a cmsghdr with RDS_CMSG_ZCOPY_COOKIE, so return EINVAL from rds_msg_zcopy for this case. Reported-by: syzbot+f893ae7bb2f6456dfbc3@syzkaller.appspotmail.com Fixes: 0cebacce ("rds: zerocopy Tx support.") Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NWillem de Bruijn <willemb@google.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
r8168_check_dash() returns false anyway for all chip versions not supporting dash. So we can simplify the check conditions. In addition change the check functions to return bool instead of int, because they actually return a bool value. Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
Currently, if BIOS enables WOL in the chip, settings are inconsistent because the device isn't marked as wakeup-enabled (if not done explicitly via userspace tools). This causes issues with suspend/ resume because mdio_bus_phy_may_suspend() checks whether device is wakeup-enabled. In detail MDIO bus access in phy_suspend() can fail because the MDIO bus is disabled. In the history of the driver we find two competing approaches: 8f9d5138 "r8169: remember WOL preferences on driver load" prefers to preserve what the BIOS may have set, whilst bde135a6 "r8169: only enable PCI wakeups when WOL is active" disabled PCI wakeup per default to work around a bug on one platform. Seems like nobody complained after the latter patch about non-working WOL, what makes me think that nobody uses WOL w/o configuring it explicitly. My opinion: Vast majority of users doesn't use WOL even if the BIOS enables it in the chip. And having WOL being active keeps the PHY(s) from powering down if being idle. If somebody needs WOL, he can enable it during boot, e.g. by configuring systemd.link/WakeOnLan. Therefore, to make WOL consistent again, disable it per default. Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Spencer 提交于
Previously, buffer descriptors containing only the frame check sequence (FCS) were skipped and not added to the skb. However, the page reference count was still incremented, leading to a memory leak. Fixing this inside gfar_add_rx_frag() is difficult due to reserved memory handling and page reuse. Instead, move the FCS handling to gfar_process_frame() and trim off the FCS before passing the skb up the networking stack. Signed-off-by: NAndy Spencer <aspencer@spacex.com> Signed-off-by: NJim Gruen <jgruen@spacex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
- 23 2月, 2018 16 次提交
-
-
由 Arnd Bergmann 提交于
gcc-8 has a new warning that detects overlapping input and output arguments in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(), which is actually correct: net/ipv6/sit.c: In function 'sit_init_net': net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] The problem here is that the logic detecting the memcpy() arguments finds them to be the same, but the conditional that tests for the input and output of ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant. We know that netdev_priv(t->dev) is the same as t for a tunnel device, and comparing "dev" directly here lets the compiler figure out as well that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so it no longer warns. This code is old, so Cc stable to make sure that we don't get the warning for older kernels built with new gcc. Cc: Martin Sebor <msebor@gmail.com> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kodanev 提交于
The following use-after-free was reported by KASan when running LTP macvtap01 test on 4.16-rc2: [10642.528443] BUG: KASAN: use-after-free in macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10642.626607] Read of size 8 at addr ffff880ba49f2100 by task ip/18450 ... [10642.963873] Call Trace: [10642.994352] dump_stack+0x5c/0x7c [10643.035325] print_address_description+0x75/0x290 [10643.092938] kasan_report+0x28d/0x390 [10643.137971] ? macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10643.207963] macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10643.275978] macvtap_newlink+0x171/0x260 [macvtap] [10643.334532] rtnl_newlink+0xd4f/0x1300 ... [10646.256176] Allocated by task 18450: [10646.299964] kasan_kmalloc+0xa6/0xd0 [10646.343746] kmem_cache_alloc_trace+0xf1/0x210 [10646.397826] macvlan_common_newlink+0x6de/0x14a0 [macvlan] [10646.464386] macvtap_newlink+0x171/0x260 [macvtap] [10646.522728] rtnl_newlink+0xd4f/0x1300 ... [10647.022028] Freed by task 18450: [10647.061549] __kasan_slab_free+0x138/0x180 [10647.111468] kfree+0x9e/0x1c0 [10647.147869] macvlan_port_destroy+0x3db/0x650 [macvlan] [10647.211411] rollback_registered_many+0x5b9/0xb10 [10647.268715] rollback_registered+0xd9/0x190 [10647.319675] register_netdevice+0x8eb/0xc70 [10647.370635] macvlan_common_newlink+0xe58/0x14a0 [macvlan] [10647.437195] macvtap_newlink+0x171/0x260 [macvtap] Commit d02fd6e7 ("macvlan: Fix one possible double free") handles the case when register_netdevice() invokes ndo_uninit() on error and as a result free the port. But 'macvlan_port_get_rtnl(dev))' check (returns dev->rx_handler_data), which was added by this commit in order to prevent double free, is not quite correct: * for macvlan it always returns NULL because 'lowerdev' is the one that was used to register rx handler (port) in macvlan_port_create() as well as to unregister it in macvlan_port_destroy(). * for macvtap it always returns a valid pointer because macvtap registers its own rx handler before macvlan_common_newlink(). Fixes: d02fd6e7 ("macvlan: Fix one possible double free") Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratyush Anand 提交于
do_task_stat() calls get_wchan(), which further does unwind_frame(). unwind_frame() restores frame->pc to original value in case function graph tracer has modified a return address (LR) in a stack frame to hook a function return. However, if function graph tracer has hit a filtered function, then we can't unwind it as ftrace_push_return_trace() has biased the index(frame->graph) with a 'huge negative' offset(-FTRACE_NOTRACE_DEPTH). Moreover, arm64 stack walker defines index(frame->graph) as unsigned int, which can not compare a -ve number. Similar problem we can have with calling of walk_stackframe() from save_stack_trace_tsk() or dump_backtrace(). This patch fixes unwind_frame() to test the index for -ve value and restore index accordingly before we can restore frame->pc. Reproducer: cd /sys/kernel/debug/tracing/ echo schedule > set_graph_notrace echo 1 > options/display-graph echo wakeup > current_tracer ps -ef | grep -i agent Above commands result in: Unable to handle kernel paging request at virtual address ffff801bd3d1e000 pgd = ffff8003cbe97c00 [ffff801bd3d1e000] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 96000006 [#1] SMP [...] CPU: 5 PID: 11696 Comm: ps Not tainted 4.11.0+ #33 [...] task: ffff8003c21ba000 task.stack: ffff8003cc6c0000 PC is at unwind_frame+0x12c/0x180 LR is at get_wchan+0xd4/0x134 pc : [<ffff00000808892c>] lr : [<ffff0000080860b8>] pstate: 60000145 sp : ffff8003cc6c3ab0 x29: ffff8003cc6c3ab0 x28: 0000000000000001 x27: 0000000000000026 x26: 0000000000000026 x25: 00000000000012d8 x24: 0000000000000000 x23: ffff8003c1c04000 x22: ffff000008c83000 x21: ffff8003c1c00000 x20: 000000000000000f x19: ffff8003c1bc0000 x18: 0000fffffc593690 x17: 0000000000000000 x16: 0000000000000001 x15: 0000b855670e2b60 x14: 0003e97f22cf1d0f x13: 0000000000000001 x12: 0000000000000000 x11: 00000000e8f4883e x10: 0000000154f47ec8 x9 : 0000000070f367c0 x8 : 0000000000000000 x7 : 00008003f7290000 x6 : 0000000000000018 x5 : 0000000000000000 x4 : ffff8003c1c03cb0 x3 : ffff8003c1c03ca0 x2 : 00000017ffe80000 x1 : ffff8003cc6c3af8 x0 : ffff8003d3e9e000 Process ps (pid: 11696, stack limit = 0xffff8003cc6c0000) Stack: (0xffff8003cc6c3ab0 to 0xffff8003cc6c4000) [...] [<ffff00000808892c>] unwind_frame+0x12c/0x180 [<ffff000008305008>] do_task_stat+0x864/0x870 [<ffff000008305c44>] proc_tgid_stat+0x3c/0x48 [<ffff0000082fde0c>] proc_single_show+0x5c/0xb8 [<ffff0000082b27e0>] seq_read+0x160/0x414 [<ffff000008289e6c>] __vfs_read+0x58/0x164 [<ffff00000828b164>] vfs_read+0x88/0x144 [<ffff00000828c2e8>] SyS_read+0x60/0xc0 [<ffff0000080834a0>] __sys_trace_return+0x0/0x4 Fixes: 20380bb3 (arm64: ftrace: fix a stack tracer's output under function graph tracer) Signed-off-by: NPratyush Anand <panand@redhat.com> Signed-off-by: NJerome Marchand <jmarchan@redhat.com> [catalin.marinas@arm.com: replace WARN_ON with WARN_ON_ONCE] Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Randy Dunlap 提交于
security/integrity/digsig.c has build errors on some $ARCH due to a missing header file, so add it. security/integrity/digsig.c:146:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] Reported-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: linux-integrity@vger.kernel.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/Signed-off-by: NJames Morris <james.morris@microsoft.com>
-
由 James Morris 提交于
Merge tag 'keys-fixes-20180222-2' of https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into fixes-v4.16-rc3 Keyrings fixes.
-
git://git.pengutronix.de/git/pza/linux由 Dave Airlie 提交于
drm/imx: ipu-v3 fixups and grayscale support - Make const interrupt register arrays static, reduces object size. - Fix device_node leaks in PRE/PRG phandle lookup functions. - Add 8-bit and 16-bit grayscale buffer support to ipu_cpmem_set_image, - add 10-bit and 12-bit grayscale media bus support to ipu-csi, to be used by the imx-media driver. * tag 'imx-drm-next-2018-02-22' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle gpu: ipu-cpmem: add 8-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: make const arrays int_reg static, shrinks object size
-
由 Kees Cook 提交于
The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant when compiler_types.h was added to kconfig.h, unexpected things appeared (e.g. struct declarations) which should not have been present. As done in the general %.S compiler command, __ASSEMBLY__ is now included here too. The failure was: Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error FATAL ERROR: Unable to parse input tree /usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument /usr/bin/mkimage Can't add hashes to FIT blob Reported-by: Nkbuild test robot <lkp@intel.com> Fixes: 28128c61 ("kconfig.h: Include compiler types to avoid missed struct attributes") Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo fix from Eric Biederman: "This fixes a build error that only shows up on blackfin" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: fs/signalfd: fix build error for BUS_MCEERR_AR
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fix from Herbert Xu: "Fix an oops in the s5p-sss driver when used with ecb(aes)" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s5p-sss - Fix kernel Oops in AES-ECB mode
-
由 Daniel Borkmann 提交于
I recently noticed a crash on arm64 when feeding a bogus index into BPF tail call helper. The crash would not occur when the interpreter is used, but only in case of JIT. Output looks as follows: [ 347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510 [...] [ 347.043065] [fffb850e96492510] address between user and kernel address ranges [ 347.050205] Internal error: Oops: 96000004 [#1] SMP [...] [ 347.190829] x13: 0000000000000000 x12: 0000000000000000 [ 347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10 [ 347.201427] x9 : 0000000000000000 x8 : 0000000000000000 [ 347.206726] x7 : 0000000000000000 x6 : 001c991738000000 [ 347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a [ 347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500 [ 347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500 [ 347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61) [ 347.235221] Call trace: [ 347.237656] 0xffff000002f3a4fc [ 347.240784] bpf_test_run+0x78/0xf8 [ 347.244260] bpf_prog_test_run_skb+0x148/0x230 [ 347.248694] SyS_bpf+0x77c/0x1110 [ 347.251999] el0_svc_naked+0x30/0x34 [ 347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b) [...] In this case the index used in BPF r3 is the same as in r1 at the time of the call, meaning we fed a pointer as index; here, it had the value 0xffff808fd7cf0500 which sits in x2. While I found tail calls to be working in general (also for hitting the error cases), I noticed the following in the code emission: # bpftool p d j i 988 [...] 38: ldr w10, [x1,x10] 3c: cmp w2, w10 40: b.ge 0x000000000000007c <-- signed cmp 44: mov x10, #0x20 // #32 48: cmp x26, x10 4c: b.gt 0x000000000000007c 50: add x26, x26, #0x1 54: mov x10, #0x110 // #272 58: add x10, x1, x10 5c: lsl x11, x2, #3 60: ldr x11, [x10,x11] <-- faulting insn (f86b694b) 64: cbz x11, 0x000000000000007c [...] Meaning, the tests passed because commit ddb55992 ("arm64: bpf: implement bpf_tail_call() helper") was using signed compares instead of unsigned which as a result had the test wrongly passing. Change this but also the tail call count test both into unsigned and cap the index as u32. Latter we did as well in 90caccdd ("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here, too. Tested on HiSilicon Hi1616. Result after patch: # bpftool p d j i 268 [...] 38: ldr w10, [x1,x10] 3c: add w2, w2, #0x0 40: cmp w2, w10 44: b.cs 0x0000000000000080 48: mov x10, #0x20 // #32 4c: cmp x26, x10 50: b.hi 0x0000000000000080 54: add x26, x26, #0x1 58: mov x10, #0x110 // #272 5c: add x10, x1, x10 60: lsl x11, x2, #3 64: ldr x11, [x10,x11] 68: cbz x11, 0x0000000000000080 [...] Fixes: ddb55992 ("arm64: bpf: implement bpf_tail_call() helper") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Implement a retpoline [0] for the BPF tail call JIT'ing that converts the indirect jump via jmp %rax that is used to make the long jump into another JITed BPF image. Since this is subject to speculative execution, we need to control the transient instruction sequence here as well when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop. The latter aligns also with what gcc / clang emits (e.g. [1]). JIT dump after patch: # bpftool p d x i 1 0: (18) r2 = map[id:1] 2: (b7) r3 = 0 3: (85) call bpf_tail_call#12 4: (b7) r0 = 2 5: (95) exit With CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000072 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000072 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000072 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: callq 0x000000000000006d |+ 66: pause | 68: lfence | 6b: jmp 0x0000000000000066 | 6d: mov %rax,(%rsp) | 71: retq | 72: mov $0x2,%eax [...] * relative fall-through jumps in error case + retpoline for indirect jump Without CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000063 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000063 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000063 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: jmpq *%rax |- 63: mov $0x2,%eax [...] * relative fall-through jumps in error case - plain indirect jump as before [0] https://support.google.com/faqs/answer/7625886 [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2bSigned-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Randy Dunlap 提交于
Fix build error in fs/signalfd.c by using same method that is used in kernel/signal.c: separate blocks for different signal si_code values. ./fs/signalfd.c: error: 'BUS_MCEERR_AR' undeclared (first use in this function) Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
-
由 David Howells 提交于
All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send both parts of the iov[] buffer, but one of them does not. Fix it so that it does. Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc header included, but no payload. Fixes: 5a924b89 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs") Reported-by: NMarc Dionne <marc.dionne@auristor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
Declaring a static function in a header leads to a warning every time that header gets included without the function being used: In file included from drivers/net/dsa/mv88e6xxx/chip.c:42: drivers/net/dsa/mv88e6xxx/ptp.h:92:13: error: 'mv88e6xxx_hwtstamp_work' defined but not used [-Werror=unused-function] static long mv88e6xxx_hwtstamp_work(struct ptp_clock_info *ptp) In file included from drivers/net/dsa/mv88e6xxx/chip.c:38: drivers/net/dsa/mv88e6xxx/global2.h:355:12: error: 'mv88e6xxx_g2_wait' defined but not used [-Werror=unused-function] static int mv88e6xxx_g2_wait(struct mv88e6xxx_chip *chip, int reg, u16 mask) ^~~~~~~~~~~~~~~~~ drivers/net/dsa/mv88e6xxx/global2.h:350:12: error: 'mv88e6xxx_g2_update' defined but not used [-Werror=unused-function] static int mv88e6xxx_g2_update(struct mv88e6xxx_chip *chip, int reg, u16 update) ^~~~~~~~~~~~~~~~~~~ drivers/net/dsa/mv88e6xxx/global2.h:345:12: error: 'mv88e6xxx_g2_write' defined but not used [-Werror=unused-function] static int mv88e6xxx_g2_write(struct mv88e6xxx_chip *chip, int reg, u16 val) ^~~~~~~~~~~~~~~~~~ drivers/net/dsa/mv88e6xxx/global2.h:340:12: error: 'mv88e6xxx_g2_read' defined but not used [-Werror=unused-function] static int mv88e6xxx_g2_read(struct mv88e6xxx_chip *chip, int reg, u16 *val) This marks all such functions in dsa inline to make sure we don't warn about them. Fixes: c6fe0ad2 ("net: dsa: mv88e6xxx: add rx/tx timestamping support") Fixes: 0d632c3d ("net: dsa: mv88e6xxx: add accessors for PTP/TAI registers") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We should check "self->aq_hw" for allocation failure, and also we should free it on the error paths. Fixes: 23ee07ad ("net: aquantia: Cleanup pci functions module") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yonghong Song 提交于
Commit 9a3efb6b ("bpf: fix memory leak in lpm_trie map_free callback function") fixed a memory leak and removed unnecessary locks in map_free callback function. Unfortrunately, it introduced a lockdep warning. When lockdep checking is turned on, running tools/testing/selftests/bpf/test_lpm_map will have: [ 98.294321] ============================= [ 98.294807] WARNING: suspicious RCU usage [ 98.295359] 4.16.0-rc2+ #193 Not tainted [ 98.295907] ----------------------------- [ 98.296486] /home/yhs/work/bpf/kernel/bpf/lpm_trie.c:572 suspicious rcu_dereference_check() usage! [ 98.297657] [ 98.297657] other info that might help us debug this: [ 98.297657] [ 98.298663] [ 98.298663] rcu_scheduler_active = 2, debug_locks = 1 [ 98.299536] 2 locks held by kworker/2:1/54: [ 98.300152] #0: ((wq_completion)"events"){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0 [ 98.301381] #1: ((work_completion)(&map->work)){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0 Since actual trie tree removal happens only after no other accesses to the tree are possible, replacing rcu_dereference_protected(*slot, lockdep_is_held(&trie->lock)) with rcu_dereference_protected(*slot, 1) fixed the issue. Fixes: 9a3efb6b ("bpf: fix memory leak in lpm_trie map_free callback function") Reported-by: NEric Dumazet <edumazet@google.com> Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NYonghong Song <yhs@fb.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-