提交 b483a4a5 编写于 作者: R Roger Quadros 提交者: Paul Walmsley

ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module

Without this, the USB devices are sometimes not detected on OMAP4 Panda
with u-boot v2013.10.

Unlike what the comment states, errata i660 does not state that we
can't RESET the USB host module. Instead it states that RESET is the
only way to recover from a deadlock situation.

RESET ensures that the module is in a known good state irrespective
of what bootloader does with the module, so it must be done at boot.
Reported-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> # Panda, BeagleXM
Acked-by: NBenoît Cousson <bcousson@baylibre.com>
Fixes: af88fa9a ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4")
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
上级 6ce4eac1
......@@ -2937,7 +2937,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET),
SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
......@@ -3001,15 +3001,7 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
* hence HWMOD_SWSUP_MSTANDBY
*/
/*
* During system boot; If the hwmod framework resets the module
* the module will have smart idle settings; which can lead to deadlock
* (above Errata Id:i660); so, dont reset the module during boot;
* Use HWMOD_INIT_NO_RESET.
*/
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
HWMOD_INIT_NO_RESET,
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
};
/*
......
......@@ -1544,7 +1544,8 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
SYSC_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
......@@ -1598,15 +1599,7 @@ static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
* hence HWMOD_SWSUP_MSTANDBY
*/
/*
* During system boot; If the hwmod framework resets the module
* the module will have smart idle settings; which can lead to deadlock
* (above Errata Id:i660); so, dont reset the module during boot;
* Use HWMOD_INIT_NO_RESET.
*/
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
HWMOD_INIT_NO_RESET,
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
.main_clk = "l3init_60m_fclk",
.prcm = {
.omap4 = {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册