提交 a1d35a7a 编写于 作者: K Krzysztof Helt 提交者: Linus Torvalds

cirrusfb: use modedb and add mode_option parameter

Use modedb for initial mode instead of table of few predefined modes.

Add mode_option module parameter as a step toward unification of frame
buffers' parameters.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 64beab14
......@@ -372,98 +372,8 @@ struct cirrusfb_info {
void (*unmap)(struct fb_info *info);
};
static unsigned cirrusfb_def_mode = 1;
static int noaccel;
/*
* Predefined Video Modes
*/
static const struct {
const char *name;
struct fb_var_screeninfo var;
} cirrusfb_predefined[] = {
{
/* autodetect mode */
.name = "Autodetect",
}, {
/* 640x480, 31.25 kHz, 60 Hz, 25 MHz PixClock */
.name = "640x480",
.var = {
.xres = 640,
.yres = 480,
.xres_virtual = 640,
.yres_virtual = 480,
.bits_per_pixel = 8,
.red = { .length = 8 },
.green = { .length = 8 },
.blue = { .length = 8 },
.width = -1,
.height = -1,
.pixclock = 40000,
.left_margin = 48,
.right_margin = 16,
.upper_margin = 32,
.lower_margin = 8,
.hsync_len = 96,
.vsync_len = 4,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
}
}, {
/* 800x600, 48 kHz, 76 Hz, 50 MHz PixClock */
.name = "800x600",
.var = {
.xres = 800,
.yres = 600,
.xres_virtual = 800,
.yres_virtual = 600,
.bits_per_pixel = 8,
.red = { .length = 8 },
.green = { .length = 8 },
.blue = { .length = 8 },
.width = -1,
.height = -1,
.pixclock = 20000,
.left_margin = 128,
.right_margin = 16,
.upper_margin = 24,
.lower_margin = 2,
.hsync_len = 96,
.vsync_len = 6,
.vmode = FB_VMODE_NONINTERLACED
}
}, {
/*
* Modeline from XF86Config:
* Mode "1024x768" 80 1024 1136 1340 1432 768 770 774 805
*/
/* 1024x768, 55.8 kHz, 70 Hz, 80 MHz PixClock */
.name = "1024x768",
.var = {
.xres = 1024,
.yres = 768,
.xres_virtual = 1024,
.yres_virtual = 768,
.bits_per_pixel = 8,
.red = { .length = 8 },
.green = { .length = 8 },
.blue = { .length = 8 },
.width = -1,
.height = -1,
.pixclock = 12500,
.left_margin = 144,
.right_margin = 32,
.upper_margin = 30,
.lower_margin = 2,
.hsync_len = 192,
.vsync_len = 6,
.vmode = FB_VMODE_NONINTERLACED
}
}
};
#define NUM_TOTAL_MODES ARRAY_SIZE(cirrusfb_predefined)
static char *mode_option __devinitdata = "640x480@60";
/****************************************************************************/
/**** BEGIN PROTOTYPES ******************************************************/
......@@ -2267,23 +2177,27 @@ static int cirrusfb_register(struct fb_info *info)
/* sanity checks */
assert(btype != BT_NONE);
/* set all the vital stuff */
cirrusfb_set_fbinfo(info);
DPRINTK("cirrusfb: (RAM start set to: 0x%p)\n", info->screen_base);
/* Make pretend we've set the var so our structures are in a "good" */
/* state, even though we haven't written the mode to the hw yet... */
info->var = cirrusfb_predefined[cirrusfb_def_mode].var;
err = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8);
if (!err) {
DPRINTK("wrong initial video mode\n");
err = -EINVAL;
goto err_dealloc_cmap;
}
info->var.activate = FB_ACTIVATE_NOW;
err = cirrusfb_decode_var(&info->var, &cinfo->currentmode, info);
if (err < 0) {
/* should never happen */
DPRINTK("choking on default var... umm, no good.\n");
goto err_unmap_cirrusfb;
goto err_dealloc_cmap;
}
/* set all the vital stuff */
cirrusfb_set_fbinfo(info);
err = register_framebuffer(info);
if (err < 0) {
printk(KERN_ERR "cirrusfb: could not register "
......@@ -2296,7 +2210,6 @@ static int cirrusfb_register(struct fb_info *info)
err_dealloc_cmap:
fb_dealloc_cmap(&info->cmap);
err_unmap_cirrusfb:
cinfo->unmap(info);
framebuffer_release(info);
return err;
......@@ -2608,17 +2521,17 @@ static int __init cirrusfb_setup(char *options) {
return 0;
while ((this_opt = strsep(&options, ",")) != NULL) {
if (!*this_opt) continue;
if (!*this_opt)
continue;
DPRINTK("cirrusfb_setup: option '%s'\n", this_opt);
for (i = 0; i < NUM_TOTAL_MODES; i++) {
sprintf(s, "mode:%s", cirrusfb_predefined[i].name);
if (strcmp(this_opt, s) == 0)
cirrusfb_def_mode = i;
}
if (!strcmp(this_opt, "noaccel"))
noaccel = 1;
else if (!strncmp(this_opt, "mode:", 5))
mode_option = this_opt + 5;
else
mode_option = this_opt;
}
return 0;
}
......@@ -2644,6 +2557,9 @@ static void __exit cirrusfb_exit(void)
module_init(cirrusfb_init);
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'");
#ifdef MODULE
module_exit(cirrusfb_exit);
#endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册