提交 723a6c7a 编写于 作者: D David S. Miller

Merge branch 'bnx2x'

Yuval Mintz says:

====================
bnx2x: Bug fixes patch series

Most of what this parch series contains is SR-IOV related bug fixes.
Additionally, it contains some small fixes for legacy devices/modes.

Please consider applying these patches to `net'.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -1250,7 +1250,10 @@ struct bnx2x_slowpath {
* Therefore, if they would have been defined in the same union,
* data can get corrupted.
*/
struct afex_vif_list_ramrod_data func_afex_rdata;
union {
struct afex_vif_list_ramrod_data viflist_data;
struct function_update_data func_update;
} func_afex_rdata;
/* used by dmae command executer */
struct dmae_command dmae[MAX_DMAE_C];
......@@ -2499,4 +2502,6 @@ void bnx2x_set_local_cmng(struct bnx2x *bp);
#define MCPR_SCRATCH_BASE(bp) \
(CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
#define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX))
#endif /* bnx2x.h */
......@@ -11447,9 +11447,9 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
}
}
/* adjust igu_sb_cnt to MF for E1x */
if (CHIP_IS_E1x(bp) && IS_MF(bp))
bp->igu_sb_cnt /= E1HVN_MAX;
/* adjust igu_sb_cnt to MF for E1H */
if (CHIP_IS_E1H(bp) && IS_MF(bp))
bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, E1H_MAX_MF_SB_COUNT);
/* port info */
bnx2x_get_port_hwinfo(bp);
......
......@@ -2038,6 +2038,7 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp,
struct bnx2x_vlan_mac_ramrod_params p;
struct bnx2x_exe_queue_obj *exeq = &o->exe_queue;
struct bnx2x_exeq_elem *exeq_pos, *exeq_pos_n;
unsigned long flags;
int read_lock;
int rc = 0;
......@@ -2046,8 +2047,9 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp,
spin_lock_bh(&exeq->lock);
list_for_each_entry_safe(exeq_pos, exeq_pos_n, &exeq->exe_queue, link) {
if (exeq_pos->cmd_data.vlan_mac.vlan_mac_flags ==
*vlan_mac_flags) {
flags = exeq_pos->cmd_data.vlan_mac.vlan_mac_flags;
if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) ==
BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) {
rc = exeq->remove(bp, exeq->owner, exeq_pos);
if (rc) {
BNX2X_ERR("Failed to remove command\n");
......@@ -2080,7 +2082,9 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp,
return read_lock;
list_for_each_entry(pos, &o->head, link) {
if (pos->vlan_mac_flags == *vlan_mac_flags) {
flags = pos->vlan_mac_flags;
if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) ==
BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) {
p.user_req.vlan_mac_flags = pos->vlan_mac_flags;
memcpy(&p.user_req.u, &pos->u, sizeof(pos->u));
rc = bnx2x_config_vlan_mac(bp, &p);
......@@ -4382,8 +4386,11 @@ int bnx2x_config_rss(struct bnx2x *bp,
struct bnx2x_raw_obj *r = &o->raw;
/* Do nothing if only driver cleanup was requested */
if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags))
if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) {
DP(BNX2X_MSG_SP, "Not configuring RSS ramrod_flags=%lx\n",
p->ramrod_flags);
return 0;
}
r->set_pending(r);
......
......@@ -266,6 +266,13 @@ enum {
BNX2X_DONT_CONSUME_CAM_CREDIT,
BNX2X_DONT_CONSUME_CAM_CREDIT_DEST,
};
/* When looking for matching filters, some flags are not interesting */
#define BNX2X_VLAN_MAC_CMP_MASK (1 << BNX2X_UC_LIST_MAC | \
1 << BNX2X_ETH_MAC | \
1 << BNX2X_ISCSI_ETH_MAC | \
1 << BNX2X_NETQ_ETH_MAC)
#define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \
((flags) & BNX2X_VLAN_MAC_CMP_MASK)
struct bnx2x_vlan_mac_ramrod_params {
/* Object to run the command from */
......
......@@ -1209,6 +1209,11 @@ static void bnx2x_vfop_rxmode(struct bnx2x *bp, struct bnx2x_virtf *vf)
/* next state */
vfop->state = BNX2X_VFOP_RXMODE_DONE;
/* record the accept flags in vfdb so hypervisor can modify them
* if necessary
*/
bnx2x_vfq(vf, ramrod->cl_id - vf->igu_base_id, accept_flags) =
ramrod->rx_accept_flags;
vfop->rc = bnx2x_config_rx_mode(bp, ramrod);
bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
op_err:
......@@ -1224,39 +1229,43 @@ static void bnx2x_vfop_rxmode(struct bnx2x *bp, struct bnx2x_virtf *vf)
return;
}
static void bnx2x_vf_prep_rx_mode(struct bnx2x *bp, u8 qid,
struct bnx2x_rx_mode_ramrod_params *ramrod,
struct bnx2x_virtf *vf,
unsigned long accept_flags)
{
struct bnx2x_vf_queue *vfq = vfq_get(vf, qid);
memset(ramrod, 0, sizeof(*ramrod));
ramrod->cid = vfq->cid;
ramrod->cl_id = vfq_cl_id(vf, vfq);
ramrod->rx_mode_obj = &bp->rx_mode_obj;
ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid);
ramrod->rx_accept_flags = accept_flags;
ramrod->tx_accept_flags = accept_flags;
ramrod->pstate = &vf->filter_state;
ramrod->state = BNX2X_FILTER_RX_MODE_PENDING;
set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state);
set_bit(RAMROD_RX, &ramrod->ramrod_flags);
set_bit(RAMROD_TX, &ramrod->ramrod_flags);
ramrod->rdata = bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2);
ramrod->rdata_mapping = bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2);
}
int bnx2x_vfop_rxmode_cmd(struct bnx2x *bp,
struct bnx2x_virtf *vf,
struct bnx2x_vfop_cmd *cmd,
int qid, unsigned long accept_flags)
{
struct bnx2x_vf_queue *vfq = vfq_get(vf, qid);
struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
if (vfop) {
struct bnx2x_rx_mode_ramrod_params *ramrod =
&vf->op_params.rx_mode;
memset(ramrod, 0, sizeof(*ramrod));
/* Prepare ramrod parameters */
ramrod->cid = vfq->cid;
ramrod->cl_id = vfq_cl_id(vf, vfq);
ramrod->rx_mode_obj = &bp->rx_mode_obj;
ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid);
ramrod->rx_accept_flags = accept_flags;
ramrod->tx_accept_flags = accept_flags;
ramrod->pstate = &vf->filter_state;
ramrod->state = BNX2X_FILTER_RX_MODE_PENDING;
set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state);
set_bit(RAMROD_RX, &ramrod->ramrod_flags);
set_bit(RAMROD_TX, &ramrod->ramrod_flags);
ramrod->rdata =
bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2);
ramrod->rdata_mapping =
bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2);
bnx2x_vf_prep_rx_mode(bp, qid, ramrod, vf, accept_flags);
bnx2x_vfop_opset(BNX2X_VFOP_RXMODE_CONFIG,
bnx2x_vfop_rxmode, cmd->done);
......@@ -3202,13 +3211,16 @@ int bnx2x_enable_sriov(struct bnx2x *bp)
bnx2x_iov_static_resc(bp, vf);
}
/* prepare msix vectors in VF configuration space */
/* prepare msix vectors in VF configuration space - the value in the
* PCI configuration space should be the index of the last entry,
* namely one less than the actual size of the table
*/
for (vf_idx = first_vf; vf_idx < first_vf + req_vfs; vf_idx++) {
bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf_idx));
REG_WR(bp, PCICFG_OFFSET + GRC_CONFIG_REG_VF_MSIX_CONTROL,
num_vf_queues);
num_vf_queues - 1);
DP(BNX2X_MSG_IOV, "set msix vec num in VF %d cfg space to %d\n",
vf_idx, num_vf_queues);
vf_idx, num_vf_queues - 1);
}
bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
......@@ -3436,10 +3448,18 @@ int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac)
int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
{
struct bnx2x_queue_state_params q_params = {NULL};
struct bnx2x_vlan_mac_ramrod_params ramrod_param;
struct bnx2x_queue_update_params *update_params;
struct pf_vf_bulletin_content *bulletin = NULL;
struct bnx2x_rx_mode_ramrod_params rx_ramrod;
struct bnx2x *bp = netdev_priv(dev);
int rc, q_logical_state;
struct bnx2x_vlan_mac_obj *vlan_obj;
unsigned long vlan_mac_flags = 0;
unsigned long ramrod_flags = 0;
struct bnx2x_virtf *vf = NULL;
struct pf_vf_bulletin_content *bulletin = NULL;
unsigned long accept_flags;
int rc;
/* sanity and init */
rc = bnx2x_vf_ndo_prep(bp, vfidx, &vf, &bulletin);
......@@ -3457,104 +3477,118 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
/* update PF's copy of the VF's bulletin. No point in posting the vlan
* to the VF since it doesn't have anything to do with it. But it useful
* to store it here in case the VF is not up yet and we can only
* configure the vlan later when it does.
* configure the vlan later when it does. Treat vlan id 0 as remove the
* Host tag.
*/
bulletin->valid_bitmap |= 1 << VLAN_VALID;
if (vlan > 0)
bulletin->valid_bitmap |= 1 << VLAN_VALID;
else
bulletin->valid_bitmap &= ~(1 << VLAN_VALID);
bulletin->vlan = vlan;
/* is vf initialized and queue set up? */
q_logical_state =
bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj));
if (vf->state == VF_ENABLED &&
q_logical_state == BNX2X_Q_LOGICAL_STATE_ACTIVE) {
/* configure the vlan in device on this vf's queue */
unsigned long ramrod_flags = 0;
unsigned long vlan_mac_flags = 0;
struct bnx2x_vlan_mac_obj *vlan_obj =
&bnx2x_leading_vfq(vf, vlan_obj);
struct bnx2x_vlan_mac_ramrod_params ramrod_param;
struct bnx2x_queue_state_params q_params = {NULL};
struct bnx2x_queue_update_params *update_params;
if (vf->state != VF_ENABLED ||
bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj)) !=
BNX2X_Q_LOGICAL_STATE_ACTIVE)
return rc;
rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj));
if (rc)
return rc;
memset(&ramrod_param, 0, sizeof(ramrod_param));
/* configure the vlan in device on this vf's queue */
vlan_obj = &bnx2x_leading_vfq(vf, vlan_obj);
rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj));
if (rc)
return rc;
/* must lock vfpf channel to protect against vf flows */
bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
/* must lock vfpf channel to protect against vf flows */
bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
/* remove existing vlans */
__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags,
&ramrod_flags);
if (rc) {
BNX2X_ERR("failed to delete vlans\n");
rc = -EINVAL;
goto out;
}
/* remove existing vlans */
__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags,
&ramrod_flags);
if (rc) {
BNX2X_ERR("failed to delete vlans\n");
rc = -EINVAL;
goto out;
}
/* need to remove/add the VF's accept_any_vlan bit */
accept_flags = bnx2x_leading_vfq(vf, accept_flags);
if (vlan)
clear_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
else
set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
bnx2x_vf_prep_rx_mode(bp, LEADING_IDX, &rx_ramrod, vf,
accept_flags);
bnx2x_leading_vfq(vf, accept_flags) = accept_flags;
bnx2x_config_rx_mode(bp, &rx_ramrod);
/* configure the new vlan to device */
memset(&ramrod_param, 0, sizeof(ramrod_param));
__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
ramrod_param.vlan_mac_obj = vlan_obj;
ramrod_param.ramrod_flags = ramrod_flags;
set_bit(BNX2X_DONT_CONSUME_CAM_CREDIT,
&ramrod_param.user_req.vlan_mac_flags);
ramrod_param.user_req.u.vlan.vlan = vlan;
ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
if (rc) {
BNX2X_ERR("failed to configure vlan\n");
rc = -EINVAL;
goto out;
}
/* send queue update ramrod to configure default vlan and silent
* vlan removal
/* send queue update ramrod to configure default vlan and silent
* vlan removal
*/
__set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
q_params.cmd = BNX2X_Q_CMD_UPDATE;
q_params.q_obj = &bnx2x_leading_vfq(vf, sp_obj);
update_params = &q_params.params.update;
__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
&update_params->update_flags);
__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
&update_params->update_flags);
if (vlan == 0) {
/* if vlan is 0 then we want to leave the VF traffic
* untagged, and leave the incoming traffic untouched
* (i.e. do not remove any vlan tags).
*/
__set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
q_params.cmd = BNX2X_Q_CMD_UPDATE;
q_params.q_obj = &bnx2x_leading_vfq(vf, sp_obj);
update_params = &q_params.params.update;
__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
__clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
&update_params->update_flags);
__clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
&update_params->update_flags);
} else {
/* configure default vlan to vf queue and set silent
* vlan removal (the vf remains unaware of this vlan).
*/
__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
&update_params->update_flags);
__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
&update_params->update_flags);
update_params->def_vlan = vlan;
update_params->silent_removal_value =
vlan & VLAN_VID_MASK;
update_params->silent_removal_mask = VLAN_VID_MASK;
}
if (vlan == 0) {
/* if vlan is 0 then we want to leave the VF traffic
* untagged, and leave the incoming traffic untouched
* (i.e. do not remove any vlan tags).
*/
__clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
&update_params->update_flags);
__clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
&update_params->update_flags);
} else {
/* configure the new vlan to device */
__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
ramrod_param.vlan_mac_obj = vlan_obj;
ramrod_param.ramrod_flags = ramrod_flags;
ramrod_param.user_req.u.vlan.vlan = vlan;
ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
if (rc) {
BNX2X_ERR("failed to configure vlan\n");
rc = -EINVAL;
goto out;
}
/* configure default vlan to vf queue and set silent
* vlan removal (the vf remains unaware of this vlan).
*/
update_params = &q_params.params.update;
__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
&update_params->update_flags);
__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
&update_params->update_flags);
update_params->def_vlan = vlan;
}
/* Update the Queue state */
rc = bnx2x_queue_state_change(bp, &q_params);
if (rc) {
BNX2X_ERR("Failed to configure default VLAN\n");
goto out;
}
/* Update the Queue state */
rc = bnx2x_queue_state_change(bp, &q_params);
if (rc) {
BNX2X_ERR("Failed to configure default VLAN\n");
goto out;
}
/* clear the flag indicating that this VF needs its vlan
* (will only be set if the HV configured the Vlan before vf was
* up and we were called because the VF came up later
*/
/* clear the flag indicating that this VF needs its vlan
* (will only be set if the HV configured the Vlan before vf was
* up and we were called because the VF came up later
*/
out:
vf->cfg_flags &= ~VF_CFG_VLAN;
bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
}
vf->cfg_flags &= ~VF_CFG_VLAN;
bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
return rc;
}
......
......@@ -74,6 +74,7 @@ struct bnx2x_vf_queue {
/* VLANs object */
struct bnx2x_vlan_mac_obj vlan_obj;
atomic_t vlan_count; /* 0 means vlan-0 is set ~ untagged */
unsigned long accept_flags; /* last accept flags configured */
/* Queue Slow-path State object */
struct bnx2x_queue_sp_obj sp_obj;
......
......@@ -1598,6 +1598,8 @@ static void bnx2x_vfop_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf)
if (msg->flags & VFPF_SET_Q_FILTERS_RX_MASK_CHANGED) {
unsigned long accept = 0;
struct pf_vf_bulletin_content *bulletin =
BP_VF_BULLETIN(bp, vf->index);
/* covert VF-PF if mask to bnx2x accept flags */
if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST)
......@@ -1617,9 +1619,11 @@ static void bnx2x_vfop_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf)
__set_bit(BNX2X_ACCEPT_BROADCAST, &accept);
/* A packet arriving the vf's mac should be accepted
* with any vlan
* with any vlan, unless a vlan has already been
* configured.
*/
__set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept);
if (!(bulletin->valid_bitmap & (1 << VLAN_VALID)))
__set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept);
/* set rx-mode */
rc = bnx2x_vfop_rxmode_cmd(bp, vf, &cmd,
......@@ -1710,6 +1714,21 @@ static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp,
goto response;
}
}
/* if vlan was set by hypervisor we don't allow guest to config vlan */
if (bulletin->valid_bitmap & 1 << VLAN_VALID) {
int i;
/* search for vlan filters */
for (i = 0; i < filters->n_mac_vlan_filters; i++) {
if (filters->filters[i].flags &
VFPF_Q_FILTER_VLAN_TAG_VALID) {
BNX2X_ERR("VF[%d] attempted to configure vlan but one was already set by Hypervisor. Aborting request\n",
vf->abs_vfid);
vf->op_rc = -EPERM;
goto response;
}
}
}
/* verify vf_qid */
if (filters->vf_qid > vf_rxq_count(vf))
......@@ -1805,6 +1824,9 @@ static void bnx2x_vf_mbx_update_rss(struct bnx2x *bp, struct bnx2x_virtf *vf,
vf_op_params->rss_result_mask = rss_tlv->rss_result_mask;
/* flags handled individually for backward/forward compatability */
vf_op_params->rss_flags = 0;
vf_op_params->ramrod_flags = 0;
if (rss_tlv->rss_flags & VFPF_RSS_MODE_DISABLED)
__set_bit(BNX2X_RSS_MODE_DISABLED, &vf_op_params->rss_flags);
if (rss_tlv->rss_flags & VFPF_RSS_MODE_REGULAR)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册