[PATCH] libata-eh: implement BMDMA EH

Implement stock BMDMA error handling methods.
Signed-off-by: NTejun Heo <htejun@gmail.com>

drivers/scsi/libata-bmdma.c

@@ -652,6 +652,150 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc)
 	ata_altstatus(ap);        /* dummy read */
 }
 
+/**
+ *	ata_bmdma_freeze - Freeze BMDMA controller port
+ *	@ap: port to freeze
+ *
+ *	Freeze BMDMA controller port.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+void ata_bmdma_freeze(struct ata_port *ap)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+
+	ap->ctl |= ATA_NIEN;
+	ap->last_ctl = ap->ctl;
+
+	if (ap->flags & ATA_FLAG_MMIO)
+		writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr);
+	else
+		outb(ap->ctl, ioaddr->ctl_addr);
+}
+
+/**
+ *	ata_bmdma_thaw - Thaw BMDMA controller port
+ *	@ap: port to thaw
+ *
+ *	Thaw BMDMA controller port.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+void ata_bmdma_thaw(struct ata_port *ap)
+{
+	/* clear & re-enable interrupts */
+	ata_chk_status(ap);
+	ap->ops->irq_clear(ap);
+	if (ap->ioaddr.ctl_addr)	/* FIXME: hack. create a hook instead */
+		ata_irq_on(ap);
+}
+
+/**
+ *	ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller
+ *	@ap: port to handle error for
+ *	@softreset: softreset method (can be NULL)
+ *	@hardreset: hardreset method (can be NULL)
+ *	@postreset: postreset method (can be NULL)
+ *
+ *	Handle error for ATA BMDMA controller.  It can handle both
+ *	PATA and SATA controllers.  Many controllers should be able to
+ *	use this EH as-is or with some added handling before and
+ *	after.
+ *
+ *	This function is intended to be used for constructing
+ *	->error_handler callback by low level drivers.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ */
+void ata_bmdma_drive_eh(struct ata_port *ap, ata_reset_fn_t softreset,
+			ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
+{
+	struct ata_host_set *host_set = ap->host_set;
+	struct ata_eh_context *ehc = &ap->eh_context;
+	struct ata_queued_cmd *qc;
+	unsigned long flags;
+	int thaw = 0;
+
+	qc = __ata_qc_from_tag(ap, ap->active_tag);
+	if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
+		qc = NULL;
+
+	/* reset PIO HSM and stop DMA engine */
+	spin_lock_irqsave(&host_set->lock, flags);
+
+	ap->flags &= ~ATA_FLAG_NOINTR;
+	ap->hsm_task_state = HSM_ST_IDLE;
+
+	if (qc && (qc->tf.protocol == ATA_PROT_DMA ||
+		   qc->tf.protocol == ATA_PROT_ATAPI_DMA)) {
+		u8 host_stat;
+
+		host_stat = ata_bmdma_status(ap);
+
+		ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat);
+
+		/* BMDMA controllers indicate host bus error by
+		 * setting DMA_ERR bit and timing out.  As it wasn't
+		 * really a timeout event, adjust error mask and
+		 * cancel frozen state.
+		 */
+		if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) {
+			qc->err_mask = AC_ERR_HOST_BUS;
+			thaw = 1;
+		}
+
+		ap->ops->bmdma_stop(qc);
+	}
+
+	ata_altstatus(ap);
+	ata_chk_status(ap);
+	ap->ops->irq_clear(ap);
+
+	spin_unlock_irqrestore(&host_set->lock, flags);
+
+	if (thaw)
+		ata_eh_thaw_port(ap);
+
+	/* PIO and DMA engines have been stopped, perform recovery */
+	ata_do_eh(ap, softreset, hardreset, postreset);
+}
+
+/**
+ *	ata_bmdma_error_handler - Stock error handler for BMDMA controller
+ *	@ap: port to handle error for
+ *
+ *	Stock error handler for BMDMA controller.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ */
+void ata_bmdma_error_handler(struct ata_port *ap)
+{
+	ata_reset_fn_t hardreset;
+
+	hardreset = NULL;
+	if (sata_scr_valid(ap))
+		hardreset = sata_std_hardreset;
+
+	ata_bmdma_drive_eh(ap, ata_std_softreset, hardreset, ata_std_postreset);
+}
+
+/**
+ *	ata_bmdma_post_internal_cmd - Stock post_internal_cmd for
+ *				      BMDMA controller
+ *	@qc: internal command to clean up
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ */
+void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+	ata_bmdma_stop(qc);
+}
+
 #ifdef CONFIG_PCI
 static struct ata_probe_ent *
 ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)

drivers/scsi/libata-core.c

@@ -5377,6 +5377,11 @@ EXPORT_SYMBOL_GPL(ata_bmdma_start);
 EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
 EXPORT_SYMBOL_GPL(ata_bmdma_status);
 EXPORT_SYMBOL_GPL(ata_bmdma_stop);
+EXPORT_SYMBOL_GPL(ata_bmdma_freeze);
+EXPORT_SYMBOL_GPL(ata_bmdma_thaw);
+EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh);
+EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
+EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
 EXPORT_SYMBOL_GPL(ata_port_probe);
 EXPORT_SYMBOL_GPL(sata_set_spd);
 EXPORT_SYMBOL_GPL(sata_phy_reset);

include/linux/libata.h

@@ -661,6 +661,14 @@ extern void ata_bmdma_start (struct ata_queued_cmd *qc);
 extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
 extern u8   ata_bmdma_status(struct ata_port *ap);
 extern void ata_bmdma_irq_clear(struct ata_port *ap);
+extern void ata_bmdma_freeze(struct ata_port *ap);
+extern void ata_bmdma_thaw(struct ata_port *ap);
+extern void ata_bmdma_drive_eh(struct ata_port *ap,
+			       ata_reset_fn_t softreset,
+			       ata_reset_fn_t hardreset,
+			       ata_postreset_fn_t postreset);
+extern void ata_bmdma_error_handler(struct ata_port *ap);
+extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
 extern void ata_qc_complete(struct ata_queued_cmd *qc);
 extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
 			      void (*done)(struct scsi_cmnd *));