提交 5033017c 编写于 作者: H Hans-Frieder Vogt 提交者: Greg Kroah-Hartman

[PATCH] I2C: cleanup of i2c-nforce2

attached is a small patch that removes unused code from i2c-nforce2 and
adds a single debug message. The patch is against 2.6.13-rc3-mm1.
I have tested the patch with 2.6.13-rc3: compiles cleanly and works as
without the patch (as expected).
Signed-off-by: NHans-Frieder Vogt <hfvogt@arcor.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 a8decc65
......@@ -131,7 +131,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
struct nforce2_smbus *smbus = adap->algo_data;
unsigned char protocol, pec, temp;
unsigned char len = 0; /* to keep the compiler quiet */
int timeout = 0;
int i;
protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
......@@ -191,29 +190,10 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
case I2C_SMBUS_PROC_CALL:
dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
return -1;
/*
outb_p(command, NVIDIA_SMB_CMD);
outb_p(data->word, NVIDIA_SMB_DATA);
outb_p(data->word >> 8, NVIDIA_SMB_DATA + 1);
protocol = NVIDIA_SMB_PRTCL_PROC_CALL | pec;
read_write = I2C_SMBUS_READ;
break;
*/
case I2C_SMBUS_BLOCK_PROC_CALL:
dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
return -1;
/*
protocol |= pec;
len = min_t(u8, data->block[0], 31);
outb_p(command, NVIDIA_SMB_CMD);
outb_p(len, NVIDIA_SMB_BCNT);
for (i = 0; i < len; i++)
outb_p(data->block[i + 1], NVIDIA_SMB_DATA + i);
protocol = NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL | pec;
read_write = I2C_SMBUS_READ;
break;
*/
case I2C_SMBUS_WORD_DATA_PEC:
case I2C_SMBUS_BLOCK_DATA_PEC:
......@@ -232,12 +212,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
temp = inb_p(NVIDIA_SMB_STS);
#if 0
do {
i2c_do_pause(1);
temp = inb_p(NVIDIA_SMB_STS);
} while (((temp & NVIDIA_SMB_STS_DONE) == 0) && (timeout++ < MAX_TIMEOUT));
#endif
if (~temp & NVIDIA_SMB_STS_DONE) {
udelay(500);
temp = inb_p(NVIDIA_SMB_STS);
......@@ -247,9 +221,10 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
temp = inb_p(NVIDIA_SMB_STS);
}
if ((timeout >= MAX_TIMEOUT) || (~temp & NVIDIA_SMB_STS_DONE)
|| (temp & NVIDIA_SMB_STS_STATUS))
if ((~temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) {
dev_dbg(&adap->dev, "SMBus Timeout! (0x%02x)\n", temp);
return -1;
}
if (read_write == I2C_SMBUS_WRITE)
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册