提交 4aa17b28 编写于 作者: H Haggai Abramonvsky 提交者: David S. Miller

mlx5: Enable mutual support for IB and Ethernet

Ethernet functionality is only available when working in ISSI > 0 mode.

Previously, the IB driver wasn't ready to work on that mode, and hence
building both the IB driver and the Ethernet functionality in the core
driver were disallowed by Kconfigs.

Now, once we have all the pre-steps in place, we can remove this limitation.

The last steps in the IB driver for getting that setup to work are:
create dummy SRQ for the driver's use (until now we could use XRC_SRQ
as SRQ and XRC_SRQ, after moving to ISSI > 0, we separate XRC SRQs from
basic SRQs) and adapt the create QP function to be compatible with ISSI > 0.
Signed-off-by: NHaggai Abramovsky <hagaya@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 647241ea
......@@ -1324,8 +1324,29 @@ static int create_dev_resources(struct mlx5_ib_resources *devr)
atomic_inc(&devr->p0->usecnt);
atomic_set(&devr->s0->usecnt, 0);
memset(&attr, 0, sizeof(attr));
attr.attr.max_sge = 1;
attr.attr.max_wr = 1;
attr.srq_type = IB_SRQT_BASIC;
devr->s1 = mlx5_ib_create_srq(devr->p0, &attr, NULL);
if (IS_ERR(devr->s1)) {
ret = PTR_ERR(devr->s1);
goto error5;
}
devr->s1->device = &dev->ib_dev;
devr->s1->pd = devr->p0;
devr->s1->uobject = NULL;
devr->s1->event_handler = NULL;
devr->s1->srq_context = NULL;
devr->s1->srq_type = IB_SRQT_BASIC;
devr->s1->ext.xrc.cq = devr->c0;
atomic_inc(&devr->p0->usecnt);
atomic_set(&devr->s0->usecnt, 0);
return 0;
error5:
mlx5_ib_destroy_srq(devr->s0);
error4:
mlx5_ib_dealloc_xrcd(devr->x1);
error3:
......@@ -1340,6 +1361,7 @@ static int create_dev_resources(struct mlx5_ib_resources *devr)
static void destroy_dev_resources(struct mlx5_ib_resources *devr)
{
mlx5_ib_destroy_srq(devr->s1);
mlx5_ib_destroy_srq(devr->s0);
mlx5_ib_dealloc_xrcd(devr->x0);
mlx5_ib_dealloc_xrcd(devr->x1);
......
......@@ -415,6 +415,7 @@ struct mlx5_ib_resources {
struct ib_xrcd *x1;
struct ib_pd *p0;
struct ib_srq *s0;
struct ib_srq *s1;
};
struct mlx5_ib_dev {
......
......@@ -1012,7 +1012,8 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
in->ctx.rq_type_srqn |= cpu_to_be32(to_msrq(init_attr->srq)->msrq.srqn);
} else {
in->ctx.xrcd = cpu_to_be32(to_mxrcd(devr->x1)->xrcdn);
in->ctx.rq_type_srqn |= cpu_to_be32(to_msrq(devr->s0)->msrq.srqn);
in->ctx.rq_type_srqn |=
cpu_to_be32(to_msrq(devr->s1)->msrq.srqn);
}
}
......
......@@ -12,7 +12,7 @@ config MLX5_CORE
config MLX5_CORE_EN
bool "Mellanox Technologies ConnectX-4 Ethernet support"
depends on MLX5_INFINIBAND=n && NETDEVICES && ETHERNET && PCI && MLX5_CORE
depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE
default n
---help---
Ethernet support in Mellanox Technologies ConnectX-4 NIC.
......
......@@ -187,10 +187,17 @@ int mlx5_core_create_qp(struct mlx5_core_dev *dev,
struct mlx5_destroy_qp_mbox_in din;
struct mlx5_destroy_qp_mbox_out dout;
int err;
void *qpc;
memset(&out, 0, sizeof(out));
in->hdr.opcode = cpu_to_be16(MLX5_CMD_OP_CREATE_QP);
if (dev->issi) {
qpc = MLX5_ADDR_OF(create_qp_in, in, qpc);
/* 0xffffff means we ask to work with cqe version 0 */
MLX5_SET(qpc, qpc, user_index, 0xffffff);
}
err = mlx5_cmd_exec(dev, in, inlen, &out, sizeof(out));
if (err) {
mlx5_core_warn(dev, "ret %d\n", err);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册