提交 4a547a5a 编写于 作者: M Marcin Wojtas 提交者: David S. Miller

ARM: dts: armada-38x: add buffer manager nodes

Armada 38x network controller supports hardware buffer management (BM).
Since it is now enabled in mvneta driver, appropriate nodes can be added
to armada-38x.dtsi - for the actual common BM unit (bm@c8000) and its
internal SRAM (bm-bppi), which is used for indirect access to buffer
pointer ring residing in DRAM.

Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional
parameters are supposed to be set in board files.
Signed-off-by: NMarcin Wojtas <mw@semihalf.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 eb43e023
......@@ -540,6 +540,14 @@
status = "disabled";
};
bm: bm@c8000 {
compatible = "marvell,armada-380-neta-bm";
reg = <0xc8000 0xac>;
clocks = <&gateclk 13>;
internal-mem = <&bm_bppi>;
status = "disabled";
};
sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
......@@ -618,6 +626,17 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
};
bm_bppi: bm-bppi {
compatible = "mmio-sram";
reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&gateclk 13>;
no-memory-wc;
status = "disabled";
};
};
clocks {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册