提交 4296971d 编写于 作者: T Tejun Heo

[PATCH] ahci: convert to new probing mechanism and add hotplug support

Convert to new probing mechanism and add hotplug support by enabling
PORT_IRQ_PHYRDY, marking ehi for hotplug and scheduling EH on
CONNECT/PHYRDY interrupts.

Unfortunately, ahci cannot reliably wait for the first D2H FIS after
hotplug.  It sometimes succeeds but times out more often than not, so
ATA_FLAG_SKIP_D2H_BSY is used.

This patch also fixes ahci_hardreset() such that D2H Register FIS RX
area is cleared before issuing COMRESET.  Without this,
ata_busy_sleep() after COMRESET might prematually finish if the
previous TF contains DRDY && !BSY.
Signed-off-by: NTejun Heo <htejun@gmail.com>
上级 e573890b
......@@ -136,6 +136,7 @@ enum {
PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
PORT_IRQ_IF_ERR |
PORT_IRQ_CONNECT |
PORT_IRQ_PHYRDY |
PORT_IRQ_UNK_FIS,
PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
PORT_IRQ_TF_ERR |
......@@ -200,7 +201,6 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes);
static void ahci_irq_clear(struct ata_port *ap);
static int ahci_port_start(struct ata_port *ap);
static void ahci_port_stop(struct ata_port *ap);
......@@ -241,8 +241,6 @@ static const struct ata_port_operations ahci_ops = {
.tf_read = ahci_tf_read,
.probe_reset = ahci_probe_reset,
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
......@@ -267,7 +265,8 @@ static const struct ata_port_info ahci_port_info[] = {
{
.sht = &ahci_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_SKIP_D2H_BSY,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
......@@ -277,6 +276,7 @@ static const struct ata_port_info ahci_port_info[] = {
.sht = &ahci_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_SKIP_D2H_BSY |
AHCI_FLAG_RESET_NEEDS_CLO,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
......@@ -569,6 +569,17 @@ static int ahci_clo(struct ata_port *ap)
return 0;
}
static int ahci_prereset(struct ata_port *ap)
{
if ((ap->flags & AHCI_FLAG_RESET_NEEDS_CLO) &&
(ata_busy_wait(ap, ATA_BUSY, 1000) & ATA_BUSY)) {
/* ATA_BUSY hasn't cleared, so send a CLO */
ahci_clo(ap);
}
return ata_std_prereset(ap);
}
static int ahci_softreset(struct ata_port *ap, unsigned int *class)
{
struct ahci_port_priv *pp = ap->private_data;
......@@ -678,12 +689,22 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
{
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
int rc;
DPRINTK("ENTER\n");
ahci_stop_engine(ap);
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(ap->device, &tf);
tf.command = 0xff;
ata_tf_to_fis(&tf, d2h_fis, 0);
rc = sata_std_hardreset(ap, class);
ahci_start_engine(ap);
if (rc == 0 && ata_port_online(ap))
......@@ -714,19 +735,6 @@ static void ahci_postreset(struct ata_port *ap, unsigned int *class)
}
}
static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes)
{
if ((ap->flags & AHCI_FLAG_RESET_NEEDS_CLO) &&
(ata_busy_wait(ap, ATA_BUSY, 1000) & ATA_BUSY)) {
/* ATA_BUSY hasn't cleared, so send a CLO */
ahci_clo(ap);
}
return ata_drive_probe_reset(ap, ata_std_probeinit,
ahci_softreset, ahci_hardreset,
ahci_postreset, classes);
}
static u8 ahci_check_status(struct ata_port *ap)
{
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
......@@ -839,8 +847,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
}
if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
err_mask |= AC_ERR_ATA_BUS;
action |= ATA_EH_SOFTRESET;
ata_ehi_hotplugged(ehi);
ata_ehi_push_desc(ehi, ", %s", irq_stat & PORT_IRQ_CONNECT ?
"connection status changed" : "PHY RDY changed");
}
......@@ -1027,7 +1034,7 @@ static void ahci_error_handler(struct ata_port *ap)
}
/* perform recovery */
ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_hardreset,
ata_do_eh(ap, ahci_prereset, ahci_softreset, ahci_hardreset,
ahci_postreset);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册