提交 2f4f1f81 编写于 作者: C chenhui zhao 提交者: Scott Wood

powerpc/mpc85xx: Add hotplug support on E5500 and E500MC cores

Freescale E500MC and E5500 core-based platforms, like P4080, T1040,
support disabling/enabling CPU dynamically.
This patch adds this feature on those platforms.
Signed-off-by: NChenhui Zhao <chenhui.zhao@freescale.com>
Signed-off-by: NTang Yuantian <Yuantian.Tang@feescale.com>
[scottwood: removed unused pr_fmt]
Signed-off-by: NScott Wood <oss@buserror.net>
上级 56f1ba28
......@@ -389,7 +389,7 @@ config SWIOTLB
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
depends on SMP && (PPC_PSERIES || \
PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE)
---help---
Say Y here to be able to disable and re-enable individual
CPUs at runtime on SMP machines.
......
......@@ -67,6 +67,9 @@ void generic_cpu_die(unsigned int cpu);
void generic_set_cpu_dead(unsigned int cpu);
void generic_set_cpu_up(unsigned int cpu);
int generic_check_cpu_restart(unsigned int cpu);
int is_cpu_dead(unsigned int cpu);
#else
#define generic_set_cpu_up(i) do { } while (0)
#endif
#ifdef CONFIG_PPC64
......
......@@ -427,7 +427,7 @@ void generic_cpu_die(unsigned int cpu)
for (i = 0; i < 100; i++) {
smp_rmb();
if (per_cpu(cpu_state, cpu) == CPU_DEAD)
if (is_cpu_dead(cpu))
return;
msleep(100);
}
......@@ -454,6 +454,11 @@ int generic_check_cpu_restart(unsigned int cpu)
return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
}
int is_cpu_dead(unsigned int cpu)
{
return per_cpu(cpu_state, cpu) == CPU_DEAD;
}
static bool secondaries_inhibited(void)
{
return kvm_hv_mode_active();
......
......@@ -53,6 +53,7 @@ static void mpc85xx_give_timebase(void)
unsigned long flags;
local_irq_save(flags);
hard_irq_disable();
while (!tb_req)
barrier();
......@@ -101,6 +102,7 @@ static void mpc85xx_take_timebase(void)
unsigned long flags;
local_irq_save(flags);
hard_irq_disable();
tb_req = 1;
while (!tb_valid)
......@@ -136,8 +138,31 @@ static void smp_85xx_mach_cpu_die(void)
while (1)
;
}
static void qoriq_cpu_kill(unsigned int cpu)
{
int i;
for (i = 0; i < 500; i++) {
if (is_cpu_dead(cpu)) {
#ifdef CONFIG_PPC64
paca[cpu].cpu_start = 0;
#endif
return;
}
msleep(20);
}
pr_err("CPU%d didn't die...\n", cpu);
}
#endif
/*
* To keep it compatible with old boot program which uses
* cache-inhibit spin table, we need to flush the cache
* before accessing spin table to invalidate any staled data.
* We also need to flush the cache after writing to spin
* table to push data out.
*/
static inline void flush_spin_table(void *spin_table)
{
flush_dcache_range((ulong)spin_table,
......@@ -176,57 +201,20 @@ static void wake_hw_thread(void *info)
}
#endif
static int smp_85xx_kick_cpu(int nr)
static int smp_85xx_start_cpu(int cpu)
{
unsigned long flags;
const u64 *cpu_rel_addr;
__iomem struct epapr_spin_table *spin_table;
int ret = 0;
struct device_node *np;
int hw_cpu = get_hard_smp_processor_id(nr);
const u64 *cpu_rel_addr;
unsigned long flags;
int ioremappable;
int ret = 0;
int hw_cpu = get_hard_smp_processor_id(cpu);
struct epapr_spin_table __iomem *spin_table;
WARN_ON(nr < 0 || nr >= NR_CPUS);
WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
#ifdef CONFIG_PPC64
/* Threads don't use the spin table */
if (cpu_thread_in_core(nr) != 0) {
int primary = cpu_first_thread_sibling(nr);
if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
return -ENOENT;
if (cpu_thread_in_core(nr) != 1) {
pr_err("%s: cpu %d: invalid hw thread %d\n",
__func__, nr, cpu_thread_in_core(nr));
return -ENOENT;
}
if (!cpu_online(primary)) {
pr_err("%s: cpu %d: primary %d not online\n",
__func__, nr, primary);
return -ENOENT;
}
smp_call_function_single(primary, wake_hw_thread, &nr, 0);
return 0;
} else if (cpu_thread_in_core(boot_cpuid) != 0 &&
cpu_first_thread_sibling(boot_cpuid) == nr) {
if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
return -ENOENT;
smp_call_function_single(boot_cpuid, wake_hw_thread, &nr, 0);
}
#endif
np = of_get_cpu_node(nr, NULL);
np = of_get_cpu_node(cpu, NULL);
cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
if (cpu_rel_addr == NULL) {
printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
if (!cpu_rel_addr) {
pr_err("No cpu-release-addr for cpu %d\n", cpu);
return -ENOENT;
}
......@@ -246,28 +234,18 @@ static int smp_85xx_kick_cpu(int nr)
spin_table = phys_to_virt(*cpu_rel_addr);
local_irq_save(flags);
#ifdef CONFIG_PPC32
#ifdef CONFIG_HOTPLUG_CPU
/* Corresponding to generic_set_cpu_dead() */
generic_set_cpu_up(nr);
hard_irq_disable();
if (system_state == SYSTEM_RUNNING) {
/*
* To keep it compatible with old boot program which uses
* cache-inhibit spin table, we need to flush the cache
* before accessing spin table to invalidate any staled data.
* We also need to flush the cache after writing to spin
* table to push data out.
*/
flush_spin_table(spin_table);
out_be32(&spin_table->addr_l, 0);
flush_spin_table(spin_table);
if (qoriq_pm_ops)
qoriq_pm_ops->cpu_up_prepare(cpu);
/* if cpu is not spinning, reset it */
if (read_spin_table_addr_l(spin_table) != 1) {
/*
* We don't set the BPTR register here since it already points
* to the boot page properly.
*/
mpic_reset_core(nr);
mpic_reset_core(cpu);
/*
* wait until core is ready...
......@@ -277,40 +255,23 @@ static int smp_85xx_kick_cpu(int nr)
if (!spin_event_timeout(
read_spin_table_addr_l(spin_table) == 1,
10000, 100)) {
pr_err("%s: timeout waiting for core %d to reset\n",
__func__, hw_cpu);
ret = -ENOENT;
goto out;
pr_err("timeout waiting for cpu %d to reset\n",
hw_cpu);
ret = -EAGAIN;
goto err;
}
/* clear the acknowledge status */
__secondary_hold_acknowledge = -1;
}
#endif
flush_spin_table(spin_table);
out_be32(&spin_table->pir, hw_cpu);
out_be32(&spin_table->addr_l, __pa(__early_start));
flush_spin_table(spin_table);
/* Wait a bit for the CPU to ack. */
if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu,
10000, 100)) {
pr_err("%s: timeout waiting for core %d to ack\n",
__func__, hw_cpu);
ret = -ENOENT;
goto out;
}
out:
#else
smp_generic_kick_cpu(nr);
flush_spin_table(spin_table);
out_be32(&spin_table->pir, hw_cpu);
#ifdef CONFIG_PPC64
out_be64((u64 *)(&spin_table->addr_h),
__pa(ppc_function_entry(generic_secondary_smp_init)));
flush_spin_table(spin_table);
#else
out_be32(&spin_table->addr_l, __pa(__early_start));
#endif
flush_spin_table(spin_table);
err:
local_irq_restore(flags);
if (ioremappable)
......@@ -319,6 +280,60 @@ static int smp_85xx_kick_cpu(int nr)
return ret;
}
static int smp_85xx_kick_cpu(int nr)
{
int ret = 0;
#ifdef CONFIG_PPC64
int primary = nr;
#endif
WARN_ON(nr < 0 || nr >= num_possible_cpus());
pr_debug("kick CPU #%d\n", nr);
#ifdef CONFIG_PPC64
/* Threads don't use the spin table */
if (cpu_thread_in_core(nr) != 0) {
int primary = cpu_first_thread_sibling(nr);
if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
return -ENOENT;
if (cpu_thread_in_core(nr) != 1) {
pr_err("%s: cpu %d: invalid hw thread %d\n",
__func__, nr, cpu_thread_in_core(nr));
return -ENOENT;
}
if (!cpu_online(primary)) {
pr_err("%s: cpu %d: primary %d not online\n",
__func__, nr, primary);
return -ENOENT;
}
smp_call_function_single(primary, wake_hw_thread, &nr, 0);
return 0;
}
ret = smp_85xx_start_cpu(primary);
if (ret)
return ret;
paca[nr].cpu_start = 1;
generic_set_cpu_up(nr);
return ret;
#else
ret = smp_85xx_start_cpu(nr);
if (ret)
return ret;
generic_set_cpu_up(nr);
return ret;
#endif
}
struct smp_ops_t smp_85xx_ops = {
.kick_cpu = smp_85xx_kick_cpu,
.cpu_bootable = smp_generic_cpu_bootable,
......@@ -473,6 +488,10 @@ void __init mpc85xx_smp_init(void)
}
#ifdef CONFIG_HOTPLUG_CPU
#ifdef CONFIG_FSL_CORENET_RCPM
fsl_rcpm_init();
#endif
#ifdef CONFIG_FSL_PMC
mpc85xx_setup_pmc();
#endif
......@@ -480,6 +499,7 @@ void __init mpc85xx_smp_init(void)
smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
ppc_md.cpu_die = smp_85xx_mach_cpu_die;
smp_85xx_ops.cpu_die = qoriq_cpu_kill;
}
#endif
smp_ops = &smp_85xx_ops;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册