提交 2ce0acf5 编写于 作者: L Leilk Liu 提交者: Mark Brown

spi: mediatek: replace *_time name

This patch replaces *_time name in mtk_spi_prepare_transfer().
Signed-off-by: NLeilk Liu <leilk.liu@mediatek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 13da5a0b
......@@ -238,8 +238,7 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable)
static void mtk_spi_prepare_transfer(struct spi_master *master,
struct spi_transfer *xfer)
{
u32 spi_clk_hz, div, high_time, low_time, holdtime,
setuptime, cs_idletime, reg_val = 0;
u32 spi_clk_hz, div, sck_time, cs_time, reg_val = 0;
struct mtk_spi *mdata = spi_master_get_devdata(master);
spi_clk_hz = clk_get_rate(mdata->spi_clk);
......@@ -248,21 +247,18 @@ static void mtk_spi_prepare_transfer(struct spi_master *master,
else
div = 1;
high_time = (div + 1) / 2;
low_time = (div + 1) / 2;
holdtime = (div + 1) / 2 * 2;
setuptime = (div + 1) / 2 * 2;
cs_idletime = (div + 1) / 2 * 2;
sck_time = (div + 1) / 2;
cs_time = sck_time * 2;
reg_val |= (((high_time - 1) & 0xff) << SPI_CFG0_SCK_HIGH_OFFSET);
reg_val |= (((low_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET);
reg_val |= (((holdtime - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
reg_val |= (((setuptime - 1) & 0xff) << SPI_CFG0_CS_SETUP_OFFSET);
reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_HIGH_OFFSET);
reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET);
reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_SETUP_OFFSET);
writel(reg_val, mdata->base + SPI_CFG0_REG);
reg_val = readl(mdata->base + SPI_CFG1_REG);
reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
reg_val |= (((cs_idletime - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
writel(reg_val, mdata->base + SPI_CFG1_REG);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册