ARM: Make consolidated PM sleep code depend on PM_SLEEP

CONFIG_PM is now set whenever we support either runtime PM in addition
to suspend and hibernate.  This causes build errors when runtime PM is
enabled on a platform, but the CPU does not have the appropriate support
for suspend.

So, switch this code to use CONFIG_PM_SLEEP rather than CONFIG_PM to
allow runtime PM to be enabled without causing build errors.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/kernel/Makefile

@@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
-obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM_SLEEP)		+= sleep.o
 obj-$(CONFIG_HAVE_SCHED_CLOCK)	+= sched_clock.o
 obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o

arch/arm/mm/proc-arm920.S

@@ -390,7 +390,7 @@ ENTRY(cpu_arm920_set_pte_ext)
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm920_suspend_size
 .equ	cpu_arm920_suspend_size, 4 * 3
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm920_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ PID

arch/arm/mm/proc-arm926.S

@@ -404,7 +404,7 @@ ENTRY(cpu_arm926_set_pte_ext)
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm926_suspend_size
 .equ	cpu_arm926_suspend_size, 4 * 3
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm926_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ PID

arch/arm/mm/proc-sa1100.S

@@ -171,7 +171,7 @@ ENTRY(cpu_sa1100_set_pte_ext)
 
 .globl	cpu_sa1100_suspend_size
 .equ	cpu_sa1100_suspend_size, 4*4
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_sa1100_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}
 	mrc	p15, 0, r4, c3, c0, 0		@ domain ID

arch/arm/mm/proc-v6.S

@@ -124,7 +124,7 @@ ENTRY(cpu_v6_set_pte_ext)
 /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
 .globl	cpu_v6_suspend_size
 .equ	cpu_v6_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_v6_do_suspend)
 	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID

arch/arm/mm/proc-v7.S

@@ -211,7 +211,7 @@ cpu_v7_name:
 /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
 .globl	cpu_v7_suspend_size
 .equ	cpu_v7_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_v7_do_suspend)
 	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID

arch/arm/mm/proc-xsc3.S

@@ -417,7 +417,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
 
 .globl	cpu_xsc3_suspend_size
 .equ	cpu_xsc3_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_xsc3_do_suspend)
 	stmfd	sp!, {r4 - r10, lr}
 	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode

arch/arm/mm/proc-xscale.S

@@ -518,7 +518,7 @@ ENTRY(cpu_xscale_set_pte_ext)
 
 .globl	cpu_xscale_suspend_size
 .equ	cpu_xscale_suspend_size, 4 * 7
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_xscale_do_suspend)
 	stmfd	sp!, {r4 - r10, lr}
 	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode