提交 20a1ea67 编写于 作者: O Or Gerlitz 提交者: David S. Miller

net/mlx5e: Support VF vport link state control for SRIOV switchdev mode

Reflect the administative link changes done on the VF representor to the
VF e-switch vport. This means that doing ip link set down/up commands on
the VF rep will modify the e-switch vport state which in turn will make
proper VF drivers to set their carrier accordingly.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 370bad0f
......@@ -236,6 +236,35 @@ void mlx5e_nic_rep_unload(struct mlx5_eswitch *esw,
mlx5e_tc_init(priv);
}
static int mlx5e_rep_open(struct net_device *dev)
{
struct mlx5e_priv *priv = netdev_priv(dev);
struct mlx5_eswitch_rep *rep = priv->ppriv;
struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
int err;
err = mlx5e_open(dev);
if (err)
return err;
err = mlx5_eswitch_set_vport_state(esw, rep->vport, MLX5_ESW_VPORT_ADMIN_STATE_UP);
if (!err)
netif_carrier_on(dev);
return 0;
}
static int mlx5e_rep_close(struct net_device *dev)
{
struct mlx5e_priv *priv = netdev_priv(dev);
struct mlx5_eswitch_rep *rep = priv->ppriv;
struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
(void)mlx5_eswitch_set_vport_state(esw, rep->vport, MLX5_ESW_VPORT_ADMIN_STATE_DOWN);
return mlx5e_close(dev);
}
static int mlx5e_rep_get_phys_port_name(struct net_device *dev,
char *buf, size_t len)
{
......@@ -349,8 +378,8 @@ static const struct switchdev_ops mlx5e_rep_switchdev_ops = {
};
static const struct net_device_ops mlx5e_netdev_ops_rep = {
.ndo_open = mlx5e_open,
.ndo_stop = mlx5e_close,
.ndo_open = mlx5e_rep_open,
.ndo_stop = mlx5e_rep_close,
.ndo_start_xmit = mlx5e_xmit,
.ndo_get_phys_port_name = mlx5e_rep_get_phys_port_name,
.ndo_setup_tc = mlx5e_rep_ndo_setup_tc,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册