提交 1cc0c998 编写于 作者: L Lin Ming 提交者: Len Brown

ACPI: Fix D3hot v D3cold confusion

Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot
in some places, but D3cold in other places.

After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD;
and all references to D3hot use ACPI_STATE_D3_HOT.

ACPI's _PR3 method is used to enter both D3hot and D3cold states.
What distinguishes D3hot from D3cold is the presence _PR3
(Power Resources for D3hot)  If these resources are all ON,
then the state is D3hot.  If _PR3 is not present,
or all _PR0 resources for the devices are OFF,
then the state is D3cold.

This patch applies after Linux-3.4-rc1.
A future syntax cleanup may remove ACPI_STATE_D3
to emphasize that it always means ACPI_STATE_D3_COLD.
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: NAaron Lu <aaron.lu@amd.com>
Signed-off-by: NLen Brown <len.brown@intel.com>
上级 ec612fcf
......@@ -631,7 +631,7 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state)
* We know a device's inferred power state when all the resources
* required for a given D-state are 'on'.
*/
for (i = ACPI_STATE_D0; i < ACPI_STATE_D3; i++) {
for (i = ACPI_STATE_D0; i < ACPI_STATE_D3_HOT; i++) {
list = &device->power.states[i].resources;
if (list->count < 1)
continue;
......
......@@ -869,7 +869,7 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
/*
* Enumerate supported power management states
*/
for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3; i++) {
for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
struct acpi_device_power_state *ps = &device->power.states[i];
char object_name[5] = { '_', 'P', 'R', '0' + i, '\0' };
......@@ -884,21 +884,18 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
acpi_bus_add_power_resource(ps->resources.handles[j]);
}
/* The exist of _PR3 indicates D3Cold support */
if (i == ACPI_STATE_D3) {
status = acpi_get_handle(device->handle, object_name, &handle);
if (ACPI_SUCCESS(status))
device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1;
}
/* Evaluate "_PSx" to see if we can do explicit sets */
object_name[2] = 'S';
status = acpi_get_handle(device->handle, object_name, &handle);
if (ACPI_SUCCESS(status))
ps->flags.explicit_set = 1;
/* State is valid if we have some power control */
if (ps->resources.count || ps->flags.explicit_set)
/*
* State is valid if there are means to put the device into it.
* D3hot is only valid if _PR3 present.
*/
if (ps->resources.count ||
(ps->flags.explicit_set && i < ACPI_STATE_D3_HOT))
ps->flags.valid = 1;
ps->power = -1; /* Unknown - driver assigned */
......
......@@ -200,7 +200,7 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
return PCI_D1;
case ACPI_STATE_D2:
return PCI_D2;
case ACPI_STATE_D3:
case ACPI_STATE_D3_HOT:
return PCI_D3hot;
case ACPI_STATE_D3_COLD:
return PCI_D3cold;
......@@ -223,7 +223,7 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
[PCI_D0] = ACPI_STATE_D0,
[PCI_D1] = ACPI_STATE_D1,
[PCI_D2] = ACPI_STATE_D2,
[PCI_D3hot] = ACPI_STATE_D3,
[PCI_D3hot] = ACPI_STATE_D3_HOT,
[PCI_D3cold] = ACPI_STATE_D3
};
int error = -EINVAL;
......
......@@ -499,9 +499,10 @@ typedef u64 acpi_integer;
#define ACPI_STATE_D0 (u8) 0
#define ACPI_STATE_D1 (u8) 1
#define ACPI_STATE_D2 (u8) 2
#define ACPI_STATE_D3 (u8) 3
#define ACPI_STATE_D3_COLD (u8) 4
#define ACPI_D_STATES_MAX ACPI_STATE_D3_COLD
#define ACPI_STATE_D3_HOT (u8) 3
#define ACPI_STATE_D3 (u8) 4
#define ACPI_STATE_D3_COLD ACPI_STATE_D3
#define ACPI_D_STATES_MAX ACPI_STATE_D3
#define ACPI_D_STATE_COUNT 5
#define ACPI_STATE_C0 (u8) 0
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册