- 26 1月, 2010 2 次提交
-
-
由 Stephen Hemminger 提交于
By rounding up the buffer size to power of 2, several expensive modulus operations can be avoided. This patch also solves a bug where the gap need when ring gets full was not being accounted for. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Breno Leitao 提交于
Currently qlge tries to release regions even if they were not allocated. This causes messages like the following in the kernel log Trying to free nonexistent resource <00000000006af400-00000000006af4ff> Trying to free nonexistent resource <00003c04ff9f4000-00003c04ff9f7fff> Trying to free nonexistent resource <00003c04ffc00000-00003c04ffcfffff> This patch fixes the goto logic in order to not release the resources if they were not allocated. Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 1月, 2010 3 次提交
-
-
由 Alexey Dobriyan 提交于
GC is non-existent in netns, so after you hit GC threshold, no new dst entries will be created until someone triggers cleanup in init_net. Make xfrm4_dst_ops and xfrm6_dst_ops per-netns. This is not done in a generic way, because it woule waste (AF_MAX - 2) * sizeof(struct dst_ops) bytes per-netns. Reorder GC threshold initialization so it'd be done before registering XFRM policies. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Obviously, this register had some other impact that is causing the regression. Either it is masking some other access or needs to be reset in some path. Either, way it is best to just revert the change for 2.6.33 This reverts commit 166a0fd4. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Bruno Prémont found commit 9793241f (vlan: Precise RX stats accounting) added a regression for non hw accelerated vlans. [ 26.390576] BUG: unable to handle kernel NULL pointer dereference at (null) [ 26.396369] IP: [<df856b89>] vlan_skb_recv+0x89/0x280 [8021q] vlan_dev_info() was used with original device, instead of skb->dev. Also spotted by Américo Wang. Reported-By: NBruno Prémont <bonbons@linux-vserver.org> Tested-By: NBruno Prémont <bonbons@linux-vserver.org> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 1月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
"ip xfrm state|policy count" report SA/SP count from init_net, not from netns of caller process. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 1月, 2010 10 次提交
-
-
由 Mike McCormack 提交于
Y2_HW_WOL_ON/Y2_HW_WOL_OFF should be set and cleared per chip, not per port. On dual port cards, Y2_HW_WOL_ON should be enabled if either sky2 port has WOL enabled. Found while reviewing code for a WOL regression, though this is probably not the cause of the regression. Signed-off-by: NMike McCormack <mikem@ring3k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
Found this problem when testing IPv6 from a KVM guest to a remote host via e1000e device on the host. The following patch fixes the check for IPv6 GSO packet in Intel ethernet drivers to use skb_is_gso_v6(). SKB_GSO_DODGY is also set when packets are forwarded from a guest. Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
After removing the skb_dma_map/unmap calls the exception handling in igb_tx_map_adv is not correct. The issue is that the count value was not being correctly handled so as a result we were not rewinding the ring as back as we should have been. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Kirsher 提交于
Add igbvf to the list of supported Intel drivers and Alex to the list of maintainers. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Brandeburg 提交于
When testing the "e1000: enhance frame fragment detection" (and e1000e) patches we found some bugs with reducing the MTU size. The 1024 byte descriptor used with the 1000 mtu test also (re) introduced the (originally) reported bug, and causes us to need the e1000_clean_tx_irq "enhance frame fragment detection" fix. So what has occured here is that 2.6.32 is only vulnerable for mtu < 1500 due to the jumbo specific routines in both e1000 and e1000e. So, 2.6.32 needs the 2kB buffer len fix for those smaller MTUs, but is not vulnerable to the original issue reported. It has been pointed out that this vulnerability needs to be patched in older kernels that don't have the e1000 jumbo routine. Without the jumbo routines, we need the "enhance frame fragment detection" fix the e1000, old e1000e is only vulnerable for < 1500 mtu, and needs a similar fix. We split the patches up to provide easy backport paths. There is only a slight bit of extra code when this fix and the original "enhance frame fragment detection" fixes are applied, so please apply both, even though it is a bit of overkill. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ken Kawasaki 提交于
fmvj18x_cs, serial_cs: add new id Panasonic lan & modem card (model name:AL-VML101) Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Only the first two fields of mcc wrb - embedded, payload_len need to be cpu_to_le32() swapped while issuing a cmd to the hw. The fields tag0, tag1 are opaque and returned back to cpu as is... Signed-off-by: NSathya Perla <sathyap@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Murray 提交于
Please add support for Microsoft MN-120 PCMCIA network card. It's an old card, I know, but adding support is very easy. You just need to get tulip_core.c to recognise its vendor/device ID. Patch for kernel 2.6.32.4 (and many previous) attached. .....Ron Murray Signed-off-by: NRon Murray <rjmx@rjmx.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
- 22 1月, 2010 5 次提交
-
-
由 Sathya Perla 提交于
Pages are posted to the rxq in such a way that more than one frag can share the page. The last frag that uses the page unmaps the page. In the case when a page is not fully used (due to lack of space in rxq) the last frag that uses the page is not being set as a "last_page_user"; instead, the next frag in the rxq is incorrectly being set. The fix has also been tested on ppc64 with 64k pages... Signed-off-by: NSathya Perla <sathyap@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Inaky Perez-Gonzalez 提交于
The Intel WiMax Wireless Link 6050 can show under more than one USB ID. Add support for all, introducing a generic flag (i2400mu->i6050) that denotes a 6x50 based device. Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: x86: Add support for the ANY bit perf: Change the is_software_event() definition perf: Honour event state for aux stream data perf: Fix perf_event_do_pending() fallback callsite perf kmem: Print usage help for unknown commands perf kmem: Increase "Hit" column length hw-breakpoints, perf: Fix broken mmiotrace due to dr6 by reference change perf timechart: Use tid not pid for COMM change
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Reassign prev and switch_count when reacquire_kernel_lock() fail sched: Fix vmark regression on big machines
-
- 21 1月, 2010 19 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: retry FS IOs even if it has failed with AC_ERR_INVALID
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: fix race in tty_fasync serial: serial_cs: oxsemi quirk breaks resume serial: imx: bit &/| confusion serial: Fix crash if the minimum rate of the device is > 9600 baud serial-core: resume serial hardware with no_console_suspend serial: 8250_pnp: use wildcard for serial Wacom tablets nozomi: quick fix for the close/close bug compat_ioctl: Supress "unknown cmd" message on serial /dev/console
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: hv: fix smp problems in the hyperv core code Staging: et131x: Fix 2.6.33rc1 regression in et131x Staging: asus_oled: fix oops in 2.6.32.2
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Revert "sysdev: fix prototype for memory_sysdev_class show/store functions" driver-core: fix devtmpfs crash on s390
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: isp1362: fix build failure on ARM systems via irq_flags cleanup USB: isp1362: better 64bit printf warning fixes USB: fix usbstorage for 2770:915d delivers no FAT USB: Fix level of isp1760 Reloading ptd error message USB: FHCI: avoid NULL pointer dereference USB: Fix duplicate sysfs problem after device reset. USB: add speed values for USB 3.0 and wireless controllers USB: add missing delay during remote wakeup USB: EHCI & UHCI: fix race between root-hub suspend and port resume USB: EHCI: fix handling of unusual interrupt intervals USB: Don't use GFP_KERNEL while we cannot reset a storage device USB: fix bitmask merge error usb: serial: fix memory leak in generic driver USB: serial: fix USB serial fix kfifo_len locking
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: fs/bio.c: fix shadows sparse warning drbd: The kernel code is now equivalent to out of tree release 8.3.7 drbd: Allow online resizing of DRBD devices while peer not reachable (needs to be explicitly forced) drbd: Don't go into StandAlone mode when authentification failes because of network error drivers/block/drbd/drbd_receiver.c: correct NULL test cfq-iosched: Respect ioprio_class when preempting genhd: overlapping variable definition block: removed unused as_io_context DM: Fix device mapper topology stacking block: bdev_stack_limits wrapper block: Fix discard alignment calculation and printing block: Correct handling of bottom device misaligment drbd: check on CONFIG_LBDAF, not LBD drivers/block/drbd: Correct NULL test drbd: Silenced an assert that could triggered after changing write ordering method drbd: Kconfig fix drbd: Fix for a race between IO and a detach operation [Bugz 262] drbd: Use drbd_crypto_is_hash() instead of an open coded check
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (23 commits) ACPI: delete acpi_processor_power_verify_c2() ACPI: allow C3 > 1000usec ACPI: enable C2 and Turbo-mode on Nehalem notebooks on A/C ACPI: power_meter: remove double kfree() ACPI: processor: restrict early _PDC to opt-in platforms ACPI: Fix unused variable warning in sbs.c acpi: make ACPI device id constant sony-laptop - fix using of uninitialized variable ACPI: Fix section mismatch error for acpi_early_processor_set_pdc() eeepc-laptop: disable wireless hotplug for 1201N eeepc-laptop: add hotplug_disable parameter eeepc-laptop: switch to using sparse keymap library eeepc-laptop: dmi blacklist to disable pci hotplug code eeepc-laptop: disable cpu speed control on EeePC 701 ACPI: don't cond_resched if irq is disabled ACPI: Remove unnecessary cast. ACPI: Advertise to BIOS in _OSC: _OST on _PPC changes ACPI: EC: Add wait for irq storm ACPI: SBS: Move SBS HC callback to faster Notify queue x86, ACPI: delete acpi_boot_table_init() return value ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: ecryptfs: use after free ecryptfs: Eliminate useless code ecryptfs: fix interpose/interpolate typos in comments ecryptfs: pass matching flags to interpose as defined and used there ecryptfs: remove unnecessary d_drop calls in ecryptfs_link ecryptfs: don't ignore return value from lock_rename ecryptfs: initialize private persistent file before dereferencing pointer eCryptfs: Remove mmap from directory operations eCryptfs: Add getattr function eCryptfs: Use notify_change for truncating lower inodes
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix possible panic on unmount Btrfs: deal with NULL acl sent to btrfs_set_acl Btrfs: fix regression in orphan cleanup Btrfs: Fix race in btrfs_mark_extent_written Btrfs, fix memory leaks in error paths Btrfs: align offsets for btrfs_ordered_update_i_size btrfs: fix missing last-entry in readdir(3)
-
由 Yongseok Koh 提交于
In free_unmap_area_noflush(), va->flags is marked as VM_LAZY_FREE first, and then vmap_lazy_nr is increased atomically. But, in __purge_vmap_area_lazy(), while traversing of vmap_are_list, nr is counted by checking VM_LAZY_FREE is set to va->flags. After counting the variable nr, kernel reads vmap_lazy_nr atomically and checks a BUG_ON condition whether nr is greater than vmap_lazy_nr to prevent vmap_lazy_nr from being negative. The problem is that, if interrupted right after marking VM_LAZY_FREE, increment of vmap_lazy_nr can be delayed. Consequently, BUG_ON condition can be met because nr is counted more than vmap_lazy_nr. It is highly probable when vmalloc/vfree are called frequently. This scenario have been verified by adding delay between marking VM_LAZY_FREE and increasing vmap_lazy_nr in free_unmap_area_noflush(). Even the vmap_lazy_nr is for checking high watermark, it never be the strict watermark. Although the BUG_ON condition is to prevent vmap_lazy_nr from being negative, vmap_lazy_nr is signed variable. So, it could go down to negative value temporarily. Consequently, removing the BUG_ON condition is proper. A possible BUG_ON message is like the below. kernel BUG at mm/vmalloc.c:517! invalid opcode: 0000 [#1] SMP EIP: 0060:[<c04824a4>] EFLAGS: 00010297 CPU: 3 EIP is at __purge_vmap_area_lazy+0x144/0x150 EAX: ee8a8818 EBX: c08e77d4 ECX: e7c7ae40 EDX: c08e77ec ESI: 000081fe EDI: e7c7ae60 EBP: e7c7ae64 ESP: e7c7ae3c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Call Trace: [<c0482ad9>] free_unmap_vmap_area_noflush+0x69/0x70 [<c0482b02>] remove_vm_area+0x22/0x70 [<c0482c15>] __vunmap+0x45/0xe0 [<c04831ec>] vmalloc+0x2c/0x30 Code: 8d 59 e0 eb 04 66 90 89 cb 89 d0 e8 87 fe ff ff 8b 43 20 89 da 8d 48 e0 8d 43 20 3b 04 24 75 e7 fe 05 a8 a5 a3 c0 e9 78 ff ff ff <0f> 0b eb fe 90 8d b4 26 00 00 00 00 56 89 c6 b8 ac a5 a3 c0 31 EIP: [<c04824a4>] __purge_vmap_area_lazy+0x144/0x150 SS:ESP 0068:e7c7ae3c [ See also http://marc.info/?l=linux-kernel&m=126335856228090&w=2 ] Signed-off-by: NYongseok Koh <yongseok.koh@samsung.com> Reviewed-by: NMinchan Kim <minchan.kim@gmail.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh64: wire up sys_accept4. sh: unwire sys_recvmmsg. sh: ms7724: Correct sh-eth EEPROM polling timeout.
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 and V7 comments ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec work ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot() ARM: 5884/1: arm: Fix DCC console for v7 ARM: 5883/1: Revert "disable NX support for OABI-supporting kernels" ARM: 5882/1: ARM: Fix uncompress code compile for different defines of flush(void) ARM: fix badly placed mach/plat entries in Kconfig & Makefile
-
由 Stephane Eranian 提交于
Propagate the ANY bit into the fixed counter config for v3 and higher. Signed-off-by: NStephane Eranian <eranian@google.com> [a.p.zijlstra@chello.nl: split from larger patch] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4b5430c6.0f975e0a.1bf9.ffff85fe@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
The is_software_event() definition always confuses me because its an exclusive expression, make it an inclusive one. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Anton reported that perf record kept receiving events even after calling ioctl(PERF_EVENT_IOC_DISABLE). It turns out that FORK,COMM and MMAP events didn't respect the disabled state and kept flowing in. Reported-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: NAnton Blanchard <anton@samba.org> LKML-Reference: <1263459187.4244.265.camel@laptop> CC: stable@kernel.org Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Paul questioned the context in which we should call perf_event_do_pending(). After looking at that I found that it should be called from IRQ context these days, however the fallback call-site is placed in softirq context. Ammend this by placing the callback in the IRQ timer path. Reported-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1263374859.4244.192.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yong Zhang 提交于
Assume A->B schedule is processing, if B have acquired BKL before and it need reschedule this time. Then on B's context, it will go to need_resched_nonpreemptible for reschedule. But at this time, prev and switch_count are related to A. It's wrong and will lead to incorrect scheduler statistics. Signed-off-by: NYong Zhang <yong.zhang0@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <2674af741001102238w7b0ddcadref00d345e2181d11@mail.gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Galbraith 提交于
SD_PREFER_SIBLING is set at the CPU domain level if power saving isn't enabled, leading to many cache misses on large machines as we traverse looking for an idle shared cache to wake to. Change the enabler of select_idle_sibling() to SD_SHARE_PKG_RESOURCES, and enable same at the sibling domain level. Reported-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NMike Galbraith <efault@gmx.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1262612696.15495.15.camel@marge.simson.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jesse Brandeburg 提交于
Originally patched by Neil Horman <nhorman@tuxdriver.com> e1000e could with a jumbo frame enabled interface, and packet split disabled, receive a packet that would overflow a single rx buffer. While in practice very hard to craft a packet that could abuse this, it is possible. this is related to CVE-2009-4538 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-