Currently workqueue->name[] is of flexible length.  We want to use the
flexible field for something more useful and there isn't much benefit
in allowing arbitrary name length anyway.  Make it fixed len capping
at 24 bytes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Currently, when exposing attrs of an unbound workqueue via sysfs, the
workqueue_attrs of first_pwq() is used as that should equal the
current state of the workqueue.

The planned NUMA affinity support will make unbound workqueues make
use of multiple pool_workqueues for different NUMA nodes and the above
assumption will no longer hold.  Introduce workqueue->unbound_attrs
which records the current attrs in effect and use it for sysfs instead
of first_pwq()->attrs.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>

When worker tasks are created using kthread_create_on_node(),
currently only per-cpu ones have the matching NUMA node specified.
All unbound workers are always created with NUMA_NO_NODE.

Now that an unbound worker pool may have an arbitrary cpumask
associated with it, this isn't optimal.  Add pool->node which is
determined by the pool's cpumask.  If the pool's cpumask is contained
inside a NUMA node proper, the pool is associated with that node, and
all workers of the pool are created on that node.

This currently only makes difference for unbound worker pools with
cpumask contained inside single NUMA node, but this will serve as
foundation for making all unbound pools NUMA-affine.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Currently, all workqueue workers which have negative nice value has
'H' postfixed to their names.  This is necessary for per-cpu workers
as they use the CPU number instead of pool->id to identify the pool
and the 'H' postfix is the only thing distinguishing normal and
highpri workers.

As workers for unbound pools use pool->id, the 'H' postfix is purely
informational.  TASK_COMM_LEN is 16 and after the static part and
delimiters, there are only five characters left for the pool and
worker IDs.  We're expecting to have more unbound pools with the
scheduled NUMA awareness support.  Let's drop the non-essential 'H'
postfix from unbound kworker name.

While at it, restructure kthread_create*() invocation to help future
NUMA related changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Unbound workqueues are going to be NUMA-affine.  Add wq_numa_tbl_len
and wq_numa_possible_cpumask[] in preparation.  The former is the
highest NUMA node ID + 1 and the latter is masks of possibles CPUs for
each NUMA node.

This patch only introduces these.  Future patches will make use of
them.

v2: NUMA initialization move into wq_numa_init().  Also, the possible
    cpumask array is not created if there aren't multiple nodes on the
    system.  wq_numa_enabled bool added.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>

The scheduled NUMA affinity support for unbound workqueues would need
to walk workqueues list and pool related operations on each workqueue.

Move wq_pool_mutex locking out of get/put_unbound_pool() to their
callers so that pool operations can be performed while walking the
workqueues list, which is also protected by wq_pool_mutex.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>

apply_workqueue_attrs() wasn't freeing temp attrs variable @new_attrs
in its success path.  Fix it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NLai Jiangshan <laijs@cn.fujitsu.com>

29c91e99 ("workqueue: implement attribute-based unbound worker_pool
management") implemented attrs based worker_pool matching.  It tried
to avoid false negative when comparing cpumasks with custom hash
function; unfortunately, the hash and comparison functions fail to
ignore CPUs which are not possible.  It incorrectly assumed that
bitmap_copy() skips leftover bits in the last word of bitmap and
cpumask_equal() ignores impossible CPUs.

This patch updates attrs->cpumask handling such that impossible CPUs
are properly ignored.

* Hash and copy functions no longer do anything special.  They expect
  their callers to clear impossible CPUs.

* alloc_workqueue_attrs() initializes the cpumask to cpu_possible_mask
  instead of setting all bits and explicit cpumask_setall() for
  unbound_std_wq_attrs[] in init_workqueues() is dropped.

* apply_workqueue_attrs() is now responsible for ignoring impossible
  CPUs.  It makes a copy of @attrs and clears impossible CPUs before
  doing anything else.
Signed-off-by: NTejun Heo <tj@kernel.org>

8864b4e5 ("workqueue: implement get/put_pwq()") implemented pwq
(pool_workqueue) refcnting which frees workqueue when the last pwq
goes away.  It determined whether it was the last pwq by testing
wq->pwqs is empty.  Unfortunately, the test was done outside wq->mutex
and multiple pwq release could race and try to free wq multiple times
leading to oops.

Test wq->pwqs emptiness while holding wq->mutex.
Signed-off-by: NTejun Heo <tj@kernel.org>

To simplify locking, the previous patches expanded wq->mutex to
protect all fields of each workqueue instance including the pwqs list
leaving pwq_lock without any user.  Remove the unused pwq_lock.

tj: Rebased on top of the current dev branch.  Updated description.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

We're expanding wq->mutex to cover all fields specific to each
workqueue with the end goal of replacing pwq_lock which will make
locking simpler and easier to understand.

This patch makes wq->saved_max_active protected by wq->mutex instead
of pwq_lock.  As pwq_lock locking around pwq_adjust_mac_active() is no
longer necessary, this patch also replaces pwq_lock lockings of
for_each_pwq() around pwq_adjust_max_active() to wq->mutex.

tj: Rebased on top of the current dev branch.  Updated description.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

We're expanding wq->mutex to cover all fields specific to each
workqueue with the end goal of replacing pwq_lock which will make
locking simpler and easier to understand.

init_and_link_pwq() and pwq_unbound_release_workfn() already grab
wq->mutex when adding or removing a pwq from wq->pwqs list.  This
patch makes it official that the list is wq->mutex protected for
writes and updates readers accoridingly.  Explicit IRQ toggles for
sched-RCU read-locking in flush_workqueue_prep_pwqs() and
drain_workqueues() are removed as the surrounding wq->mutex can
provide sufficient synchronization.

Also, assert_rcu_or_pwq_lock() is renamed to assert_rcu_or_wq_mutex()
and checks for wq->mutex too.

pwq_lock locking and assertion are not removed by this patch and a
couple of for_each_pwq() iterations are still protected by it.
They'll be removed by future patches.

tj: Rebased on top of the current dev branch.  Updated description.
    Folded in assert_rcu_or_wq_mutex() renaming from a later patch
    along with associated comment updates.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

We're expanding wq->mutex to cover all fields specific to each
workqueue with the end goal of replacing pwq_lock which will make
locking simpler and easier to understand.

wq->nr_drainers and ->flags are specific to each workqueue.  Protect
->nr_drainers and ->flags with wq->mutex instead of pool_mutex.

tj: Rebased on top of the current dev branch.  Updated description.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Currently pwq->flush_mutex protects many fields of a workqueue
including, especially, the pwqs list.  We're going to expand this
mutex to protect most of a workqueue and eventually replace pwq_lock,
which will make locking simpler and easier to understand.

Drop the "flush_" prefix in preparation.

This patch is pure rename.

tj: Rebased on top of the current dev branch.  Updated description.
    Use WQ: and WR: instead of Q: and QR: for synchronization labels.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

wq->flush_mutex will be renamed to wq->mutex and cover all fields
specific to each workqueue and eventually replace pwq_lock, which will
make locking simpler and easier to understand.

Rename wq_mutex to wq_pool_mutex to avoid confusion with wq->mutex.
After the scheduled changes, wq_pool_mutex won't be protecting
anything specific to each workqueue instance anyway.

This patch is pure rename.

tj: s/wqs_mutex/wq_pool_mutex/.  Rewrote description.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>

If lockdep complains something for other subsystem, lockdep_is_held()
can be false negative, so we need to also test debug_locks before
triggering WARN.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

rcu_read_lock_sched() is better than preempt_disable() if the code is
protected by RCU_SCHED.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

If pwq_adjust_max_active() changes max_active from 0 to
saved_max_active, it needs to wakeup worker.  This is already done by
thaw_workqueues().

If pwq_adjust_max_active() increases max_active for an unbound wq,
while not strictly necessary for correctness, it's still desirable to
wake up a worker so that the requested concurrency level is reached
sooner.

Move wake_up_worker() call from thaw_workqueues() to
pwq_adjust_max_active() so that it can handle both of the above two
cases.  This also makes thaw_workqueues() simpler.

tj: Updated comments and description.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

We can test worker->recue_wq instead of reaching into
current_pwq->wq->rescuer and then comparing it to self.

tj: Commit message.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

get_unbound_pool() forgot to set POOL_FREEZING if workqueue_freezing
is set and a new pool could go out of sync with the global freezing
state.

Fix it by adding POOL_FREEZING if workqueue_freezing.  wq_mutex is
already held so no further locking is necessary.  This also removes
the unused static variable warning when !CONFIG_FREEZER.

tj: Updated commit message.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

With the recent addition of the custom attributes support, unbound
pools may have allowed cpumask which isn't full.  As long as some of
CPUs in the cpumask are online, its workers will maintain cpus_allowed
as set on worker creation; however, once no online CPU is left in
cpus_allowed, the scheduler will reset cpus_allowed of any workers
which get scheduled so that they can execute.

To remain compliant to the user-specified configuration, CPU affinity
needs to be restored when a CPU becomes online for an unbound pool
which doesn't currently have any online CPUs before.

This patch implement restore_unbound_workers_cpumask(), which is
called from CPU_ONLINE for all unbound pools, checks whether the
coming up CPU is the first allowed online one, and, if so, invokes
set_cpus_allowed_ptr() with the configured cpumask on all workers.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Rebinding workers of a per-cpu pool after a CPU comes online involves
a lot of back-and-forth mostly because only the task itself could
adjust CPU affinity if PF_THREAD_BOUND was set.

As CPU_ONLINE itself couldn't adjust affinity, it had to somehow
coerce the workers themselves to perform set_cpus_allowed_ptr().  Due
to the various states a worker can be in, this led to three different
paths a worker may be rebound.  worker->rebind_work is queued to busy
workers.  Idle ones are signaled by unlinking worker->entry and call
idle_worker_rebind().  The manager isn't covered by either and
implements its own mechanism.

PF_THREAD_BOUND has been relaced with PF_NO_SETAFFINITY and CPU_ONLINE
itself now can manipulate CPU affinity of workers.  This patch
replaces the existing rebind mechanism with direct one where
CPU_ONLINE iterates over all workers using for_each_pool_worker(),
restores CPU affinity, and clears WORKER_UNBOUND.

There are a couple subtleties.  All bound idle workers should have
their runqueues set to that of the bound CPU; however, if the target
task isn't running, set_cpus_allowed_ptr() just updates the
cpus_allowed mask deferring the actual migration to when the task
wakes up.  This is worked around by waking up idle workers after
restoring CPU affinity before any workers can become bound.

Another subtlety is stems from matching @pool->nr_running with the
number of running unbound workers.  While DISASSOCIATED, all workers
are unbound and nr_running is zero.  As workers become bound again,
nr_running needs to be adjusted accordingly; however, there is no good
way to tell whether a given worker is running without poking into
scheduler internals.  Instead of clearing UNBOUND directly,
rebind_workers() replaces UNBOUND with another new NOT_RUNNING flag -
REBOUND, which will later be cleared by the workers themselves while
preparing for the next round of work item execution.  The only change
needed for the workers is clearing REBOUND along with PREP.

* This patch leaves for_each_busy_worker() without any user.  Removed.

* idle_worker_rebind(), busy_worker_rebind_fn(), worker->rebind_work
  and rebind logic in manager_workers() removed.

* worker_thread() now looks at WORKER_DIE instead of testing whether
  @worker->entry is empty to determine whether it needs to do
  something special as dying is the only special thing now.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>

rebind_workers() will be reimplemented in a way which makes it mostly
decoupled from the rest of worker management.  Move rebind_workers()
so that it's located with other CPU hotplug related functions.

This patch is pure function relocation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Make worker_ida an idr - worker_idr and use it to implement
for_each_pool_worker() which will be used to simplify worker rebinding
on CPU_ONLINE.

pool->worker_idr is protected by both pool->manager_mutex and
pool->lock so that it can be iterated while holding either lock.

* create_worker() allocates ID without installing worker pointer and
  installs the pointer later using idr_replace().  This is because
  worker ID is needed when creating the actual task to name it and the
  new worker shouldn't be visible to iterations before fully
  initialized.

* In destroy_worker(), ID removal is moved before kthread_stop().
  This is again to guarantee that only fully working workers are
  visible to for_each_pool_worker().
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>

PF_THREAD_BOUND was originally used to mark kernel threads which were
bound to a specific CPU using kthread_bind() and a task with the flag
set allows cpus_allowed modifications only to itself.  Workqueue is
currently abusing it to prevent userland from meddling with
cpus_allowed of workqueue workers.

What we need is a flag to prevent userland from messing with
cpus_allowed of certain kernel tasks.  In kernel, anyone can
(incorrectly) squash the flag, and, for worker-type usages,
restricting cpus_allowed modification to the task itself doesn't
provide meaningful extra proection as other tasks can inject work
items to the task anyway.

This patch replaces PF_THREAD_BOUND with PF_NO_SETAFFINITY.
sched_setaffinity() checks the flag and return -EINVAL if set.
set_cpus_allowed_ptr() is no longer affected by the flag.

This will allow simplifying workqueue worker CPU affinity management.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>

With the recent locking updates, the only thing protected by
workqueue_lock is workqueue->maydays list.  Rename workqueue_lock to
wq_mayday_lock.

This patch is pure rename.
Signed-off-by: NTejun Heo <tj@kernel.org>

This patch continues locking cleanup from the previous patch.  It
breaks out pool_workqueue synchronization from workqueue_lock into a
new spinlock - pwq_lock.  The followings are protected by pwq_lock.

* workqueue->pwqs
* workqueue->saved_max_active

The conversion is straight-forward.  workqueue_lock usages which cover
the above two are converted to pwq_lock.  New locking label PW added
for things protected by pwq_lock and FR is updated to mean flush_mutex
+ pwq_lock + sched-RCU.

This patch shouldn't introduce any visible behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>

Currently, workqueue_lock protects most shared workqueue resources -
the pools, workqueues, pool_workqueues, draining, ID assignments,
mayday handling and so on.  The coverage has grown organically and
there is no identified bottleneck coming from workqueue_lock, but it
has grown a bit too much and scheduled rebinding changes need the
pools and workqueues to be protected by a mutex instead of a spinlock.

This patch breaks out pool and workqueue synchronization from
workqueue_lock into a new mutex - wq_mutex.  The followings are
protected by wq_mutex.

* worker_pool_idr and unbound_pool_hash
* pool->refcnt
* workqueues list
* workqueue->flags, ->nr_drainers

Most changes are mostly straight-forward.  workqueue_lock is replaced
with wq_mutex where applicable and workqueue_lock lock/unlocks are
added where wq_mutex conversion leaves data structures not protected
by wq_mutex without locking.  irq / preemption flippings were added
where the conversion affects them.  Things worth noting are

* New WQ and WR locking lables added along with
  assert_rcu_or_wq_mutex().

* worker_pool_assign_id() now expects to be called under wq_mutex.

* create_mutex is removed from get_unbound_pool().  It now just holds
  wq_mutex.

This patch shouldn't introduce any visible behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>

They're split across debugobj code for some reason.  Collect them.

This patch is pure relocation.
Signed-off-by: NTejun Heo <tj@kernel.org>

When a manager creates or destroys workers, the operations are always
done with the manager_mutex held; however, initial worker creation or
worker destruction during pool release don't grab the mutex.  They are
still correct as initial worker creation doesn't require
synchronization and grabbing manager_arb provides enough exclusion for
pool release path.

Still, let's make everyone follow the same rules for consistency and
such that lockdep annotations can be added.

Update create_and_start_worker() and put_unbound_pool() to grab
manager_mutex around thread creation and destruction respectively and
add lockdep assertions to create_worker() and destroy_worker().

This patch doesn't introduce any visible behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>

get_unbound_pool(), workqueue_cpu_up_callback() and init_workqueues()
have similar code pieces to create and start the initial worker factor
those out into create_and_start_worker().

This patch doesn't introduce any functional changes.
Signed-off-by: NTejun Heo <tj@kernel.org>

Manager operations are currently governed by two mutexes -
pool->manager_arb and ->assoc_mutex.  The former is used to decide who
gets to be the manager and the latter to exclude the actual manager
operations including creation and destruction of workers.  Anyone who
grabs ->manager_arb must perform manager role; otherwise, the pool
might stall.

Grabbing ->assoc_mutex blocks everyone else from performing manager
operations but doesn't require the holder to perform manager duties as
it's merely blocking manager operations without becoming the manager.

Because the blocking was necessary when [dis]associating per-cpu
workqueues during CPU hotplug events, the latter was named
assoc_mutex.  The mutex is scheduled to be used for other purposes, so
this patch gives it a more fitting generic name - manager_mutex - and
updates / adds comments to explain synchronization around the manager
role and operations.

This patch is pure rename / doc update.
Signed-off-by: NTejun Heo <tj@kernel.org>

There's no reason to make these trivial wrappers full (exported)
functions.  Inline the followings.

 queue_work()
 queue_delayed_work()
 mod_delayed_work()
 schedule_work_on()
 schedule_work()
 schedule_delayed_work_on()
 schedule_delayed_work()
 keventd_up()
Signed-off-by: NTejun Heo <tj@kernel.org>

Rename @id argument of for_each_pool() to @Pi so that it doesn't get
reused accidentally when for_each_pool() is used in combination with
other iterators.

This patch is purely cosmetic.
Signed-off-by: NTejun Heo <tj@kernel.org>

* Update incorrect and add missing synchronization labels.

* Update incorrect or misleading comments.  Add new comments where
  clarification is necessary.  Reformat / rephrase some comments.

* drain_workqueue() can be used separately from destroy_workqueue()
  but its warning message was incorrectly referring to destruction.

Other than the warning message change, this patch doesn't make any
functional changes.
Signed-off-by: NTejun Heo <tj@kernel.org>

Since 9e8cd2f5 ("workqueue: implement apply_workqueue_attrs()"),
init_and_link_pwq() may be called to initialize a new pool_workqueue
for a workqueue which is already online, but the function was setting
pwq->max_active to wq->saved_max_active without proper
synchronization.

Fix it by calling pwq_adjust_max_active() under proper locking instead
of manually setting max_active.
Signed-off-by: NTejun Heo <tj@kernel.org>

Rename pwq_set_max_active() to pwq_adjust_max_active() and move
pool_workqueue->max_active synchronization and max_active
determination logic into it.

The new function should be called with workqueue_lock held for stable
workqueue->saved_max_active, determines the current max_active value
the target pool_workqueue should be using from @wq->saved_max_active
and the state of the associated pool, and applies it with proper
synchronization.

The current two users - workqueue_set_max_active() and
thaw_workqueues() - are updated accordingly.  In addition, the manual
freezing handling in __alloc_workqueue_key() and
freeze_workqueues_begin() are replaced with calls to
pwq_adjust_max_active().

This centralizes max_active handling so that it's less error-prone.
Signed-off-by: NTejun Heo <tj@kernel.org>

pwq_set_max_active() is gonna be modified and used during
pool_workqueue init.  Move it above init_and_link_pwq().

This patch is pure code reorganization and doesn't introduce any
functional changes.
Signed-off-by: NTejun Heo <tj@kernel.org>

Implement a function which queries whether it currently is running off
a workqueue rescuer.  This will be used to convert writeback to
workqueue.
Signed-off-by: NTejun Heo <tj@kernel.org>

There are cases where workqueue users want to expose control knobs to
userland.  e.g. Unbound workqueues with custom attributes are
scheduled to be used for writeback workers and depending on
configuration it can be useful to allow admins to tinker with the
priority or allowed CPUs.

This patch implements workqueue_sysfs_register(), which makes the
workqueue visible under /sys/bus/workqueue/devices/WQ_NAME.  There
currently are two attributes common to both per-cpu and unbound pools
and extra attributes for unbound pools including nice level and
cpumask.

If alloc_workqueue*() is called with WQ_SYSFS,
workqueue_sysfs_register() is called automatically as part of
workqueue creation.  This is the preferred method unless the workqueue
user wants to apply workqueue_attrs before making the workqueue
visible to userland.

v2: Disallow exposing ordered workqueues as ordered workqueues can't
    be tuned in any way.
Signed-off-by: NTejun Heo <tj@kernel.org>