- 03 12月, 2006 5 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
RTM_GETPREFIX is completely unused and is thus removed. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
By replacing the current method of exporting the device configuration which included allocating a temporary buffer, copying ipv6_devconf into it and copying that buffer into the message with a method that uses nla_reserve() allowing to copy the device configuration directly into the skb data buffer, a GFP_ATOMIC allocation could be removed. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Otherwise, we will see a lot of casts... Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 12 10月, 2006 1 次提交
-
-
由 Joerg Roedel 提交于
This patch contains the changes to net/ipv6/addrconf.c to remove sit specific code if the sit driver is not selected. Signed-off-by: NJoerg Roedel <joro-lkml@zlug.org> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2006 1 次提交
-
-
由 Al Viro 提交于
inet_rcv_saddr() returns net-endian Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2006 24 次提交
-
-
由 Noriaki TAKAMIYA 提交于
IFA_F_HOMEADDRESS is introduced for Mobile IPv6 Home Addresses on Mobile Node. The IFA_F_HOMEADDRESS flag should be set for Mobile IPv6 Home Addresses for 2 purposes. 1) We need to check this on receipt of Type 2 Routing Header (RFC3775 Secion 6.4), 2) We prefer Home Address(es) in source address selection (RFC3484 Section 5 Rule 4). Signed-off-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Noriaki TAKAMIYA 提交于
IFA_F_NODAD flag, similar to IN6_IFF_NODAD in BSDs, is introduced to skip DAD. This flag should be set to Mobile IPv6 Home Address(es) on Mobile Node because DAD would fail if we should perform DAD; our Home Agent protects our Home Address(es). Signed-off-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
We do not always need proxy NDP functionality even we enable forwarding. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
iproute2 doesn't provide the NLM_F_CREATE flag when adding addresses, it is assumed to be implied. The existing code issues a check on said flag when the modify operation fails (likely due to ENOENT) before continueing to create it, this leads to a hard to predict result, therefore the NLM_F_CREATE check is removed. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Same behaviour as IPv4, using IFF_UP is a no-no anyway. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Replaces INET6_IFADDR_RTA_SPACE with a new function calculating the total required message size for all address messages. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Replaces the struct in6_rtmsg based interface orignating from the ioctl interface with a struct fib6_config based on. Allows changing the interface without breaking the ioctl interface and avoids passing on tons of parameters. The recently introduced struct nl_info is used to pass on netlink authorship information for notifications. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Provide a simple ip6_ins_rt() for the majority of users and an alternative for the exception via netlink. Avoids code obfuscation. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Provide a simple ip6_del_rt() for the majority of users and an alternative for the exception via netlink. Avoids code obfuscation. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brian Haley 提交于
Change net/core, ipv4 and ipv6 sysctl variables to __read_mostly. Couldn't actually measure any performance increase while testing (.3% I consider noise), but seems like the right thing to do. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Fixes a wrong use of current->pid as netlink pid. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Fixes a wrong use of current->pid as netlink pid. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Fixes a wrong use of current->pid as netlink pid. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This is how IPv4 handles this case too. Based upon a patch from Andrew Morton. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Adds support for policy routing rules including a new local table for routes with a local destination. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Adds the framework to support multiple IPv6 routing tables. Currently all automatically generated routes are put into the same table. This could be changed at a later point after considering the produced locking overhead. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2006 1 次提交
-
-
由 Keir Fraser 提交于
ipv6_add_addr allocates a struct inet6_ifaddr and a dstentry, but it doesn't install the dstentry in ifa->rt until after it releases the addrconf_hash_lock. This means other CPUs will be able to see the new address while it hasn't been initialized completely yet. One possible fix would be to grab the ifp->lock spinlock when creating the address struct; a simpler fix is to just move the assignment. Acked-by: jbeulich@novell.com Acked-by: okir@suse.de Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 8月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
The ifa lock is expected to be taken in BH context (by addrconf timers) so we must disable BH when accessing it from user context. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 8月, 2006 5 次提交
-
-
由 Noriaki TAKAMIYA 提交于
Based on MIPL2 kernel patch. Signed-off-by: NNoriaki YAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Noriaki TAKAMIYA 提交于
Based on MIPL2 kernel patch. Signed-off-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
We also do not try regenarating new temporary address corresponding to an address with infinite preferred lifetime. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Noriaki TAKAMIYA 提交于
Based on MIPL2 kernel patch. Signed-off-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 13 7月, 2006 2 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
In the source address selection, the address must be sorted from global to node-local. But, ifp->scope is different from the scope for source address selection. 2001::1 fe80::1 ::1 ifp->scope 0 0x02 0x01 ipv6_addr_src_scope(&ifp->addr) 0x0e 0x02 0x01 So, we need to use ipv6_addr_src_scope(&ifp->addr) for sorting. And, for backward compatibility, addresses should be sorted from new one to old one. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brian Haley 提交于
If IPv6 addresses are ordered by scope, then ipv6_dev_get_saddr() can break-out of the device addr_list for() loop when the candidate source address scope is less than the destination address scope. Signed-off-by: NBrian Haley <brian.haley@hp.com> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-