These are shared by all cd-rom drivers and should have common
handlers. Do slight cosmetic cleanups in the process.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

BLKPG is common to all block devices, so it should be handled
by common code.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

These are common to multiple block drivers, so they should
be handled by the block layer.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

blk_trace_setup is broken on x86_64 compat systems,
this makes the code work correctly on all 64 bit architectures
in compat mode.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Handle those blockdev ioctl calls that are compatible
directly from the compat_blkdev_ioctl() function, instead
of having to go through the compat_ioctl hash lookup.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Make compat_blkdev_ioctl and blkdev_ioctl reflect the respective
native versions. This is somewhat more efficient and makes it easier
to keep the two in sync.

Also get rid of the bogus handling for broken_blkgetsize and the
duplicate entry for BLKRASET.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The previous patch to move the interrupt handler registration moved it
below enabling interrupts which could be a problem if the device is on
a shared interrupt line.  This patch fixes the order.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Put function call and return code test on separate lines.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NJeff Garzik <jeff@garzik.org>

* tab-align DRIVER_*, pci_driver entries

* reduced wasted memory by killing unused struct cardinfo members

* move free_irq() call above resource unmap, to fix tiny window where
  irq handler may access recently-unmapped memory

* propagate pci_enable_device() return value

* use pci_request_regions, pci_release_regions() for resource reservation

* call pci_disable_device() in pci_driver::remove()
Signed-off-by: NJeff Garzik <jeff@garzik.org>

dev_printk() gives us a consistent prefix (driver name + PCI bus id),
which allows us to eliminate the hand-rolled one.

Also allows us to eliminate card->card_number, which was used solely in
printk() calls.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Move include/linux/umem.h to drivers/block, as umem.c is the only user,
and its not an exported header.

Move the PCI_{VENDOR,DEVICE}_ID_* constants to include/linux/pci_ids.h.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Remove the indentation on labels
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The of_platform bus binding is needed to make the device driver usable
under arch/powerpc.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The FSM needs to be initialized before it is safe to call the ISR
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Miscellanious rework to the sysace driver; Not critical, but makes the
subsequent addition of the of_platform bus binding a wee bit cleaner
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Split the determination of device registers/irqs/etc from the actual
allocation and initialization of the device structure.  This cleans
up the code a bit in preparation to add an of_platform bus binding
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

SystemACE uses the platform bus binding, but it doesn't use the
platform bus API.  Move to using the correct API for consistency
sake and future proofing against platform bus changes.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

I'm the author of the SystemACE driver
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

As bi_end_io is only called once when the reqeust is complete,
the 'size' argument is now redundant.  Remove it.

Now there is no need for bio_endio to subtract the size completed
from bi_size.  So don't do that either.

While we are at it, change bi_end_io to return void.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The only caller of bio_endio that does not pass the full bi_size
is end_that_request_first.  Also, no ->bi_end_io method is really
interested in bi_size being decremented.

So move the decrement and related code into ll_rw_blk and merge it
with order_bio_endio to form req_bio_endio which does endio functionality
specific to request completion.

As some ->bi_end_io methods do check bi_size of 0, we set it thus for
now, but that will go in the next patch.
Signed-off-by: NNeil Brown <neilb@suse.de>

### Diffstat output
 ./block/ll_rw_blk.c |   42 +++++++++++++++++++++++++++---------------
 ./fs/bio.c          |   23 +++++++++++------------
 2 files changed, 38 insertions(+), 27 deletions(-)

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Currently bi_end_io can be called multiple times as sub-requests
complete.  However no ->bi_end_io function wants to know about that.
So only call when the bio is complete.
Signed-off-by: NNeil Brown <neilb@suse.de>

### Diffstat output
 ./fs/bio.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff .prev/fs/bio.c ./fs/bio.c
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The entire function of flush_dry_bio_endio is to undo the effects
of bio_endio (when called on a barrier request).  So remove the
function and the call to bio_endio.

This allows us to remove "bi_size" from "struct request_queue".
Signed-off-by: NNeil Brown <neilb@suse.de>

### Diffstat output
 ./block/ll_rw_blk.c      |   39 ++-------------------------------------
 ./include/linux/blkdev.h |    1 -
 2 files changed, 2 insertions(+), 38 deletions(-)

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Hide everything in blkdev.h with CONFIG_BLOCK isn't set, and fixup
the (few) files that fail to build because they were relying on blkdev.h
pulling in extra includes for them.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The newer glibc does not allow system calls to be made via _syscallN()
wrapper. They have to be made through syscall(). The ionice code used
the older interface. Correcting it to use syscall.
Signed-off-by: NDhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

blk_cpu_notifier is marked as __devinitdata, but __devinitdata need not
be __init even if HOTPLUG_CPU=n, which wastes space. It should be marked
__cpuinitdata, and the callback itself as __cpuinit.
Signed-off-by: NSatyam Sharma <satyam@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Remove one level of nesting where appropriate.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

These have very similar functions and should share code where
possible.
Signed-off-by: NNeil Brown <neilb@suse.de>

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

blk_rq_bio_prep is exported for use in exactly
one place.  That place can benefit from using
the new blk_rq_append_bio instead.
So
  - change dm-emc to call blk_rq_append_bio
  - stop exporting blk_rq_bio_prep, and
  - initialise rq_disk in blk_rq_bio_prep,
       as dm-emc needs it.
Signed-off-by: NNeil Brown <neilb@suse.de>

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

ll_back_merge_fn is currently exported to SCSI where is it used,
together with blk_rq_bio_prep, in exactly the same way these
functions are used in __blk_rq_map_user.

So move the common code into a new function (blk_rq_append_bio), and
don't export ll_back_merge_fn any longer.
Signed-off-by: NNeil Brown <neilb@suse.de>

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

umem.c:
  advances bi_idx and bi_sector to track where it is up to.
   But it is only ever doing this on one bio, so the updated
   fields can easily be kept elsewhere (current_*).
  updates bi_size, but never uses the updated values, so
   this isn't needed.
  reuses bi_phys_segments to count how many iovecs have been
   completely.  As the completion happens sequentiually, we
   can store this information outside the bio too.
Signed-off-by: NNeil Brown <neilb@suse.de>

diff .prev/drivers/block/umem.c ./drivers/block/umem.c
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Every usage of rq_for_each_bio wraps a usage of
bio_for_each_segment, so these can be combined into
rq_for_each_segment.

We define "struct req_iterator" to hold the 'bio' and 'index' that
are needed for the double iteration.
Signed-off-by: NNeil Brown <neilb@suse.de>

Various compile fixes by me...
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

blk_recalc_rq_segments calls blk_recount_segments on each bio,
then does some extra calculations to handle segments that overlap
two bios.

If we merge the code from blk_recount_segments into
blk_recalc_rq_segments, we can process the whole request one bio_vec
at a time, and not need the messy cross-bio calculations.

Then blk_recount_segments can be implemented by calling
blk_recalc_rq_segments, passing it a simple on-stack request which
stores just the bio.
Signed-off-by: NNeil Brown <neilb@suse.de>

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Au1000: set the PCI controller IO base
  [MIPS] Alchemy: Fix USB initialization.
  [MIPS] IP32: Fix fatal typo in address computation.

The recent fix for a circular lock dependency unfortunately introduced a
potential memory leak in the event where the call to nlmsvc_lookup_host
fails for some reason.

Thanks to Roel Kluin for spotting this.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recent mv_fill_sg() rewrite, to fix a data corruption problem
related to IOMMU virtual merging, forgot to account for the
potentially-increased size of the scatter/gather table after its run.

Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff
to more closely match the needs of mv_fill_sg().
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The PCI controller IO base was not set in the au1000 pci code.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>