* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data
  target: Fix bug for transport_generic_wait_for_tasks with direct operation
  target: iscsi_target depends on NET
  target: Fix WRITE_SAME_16 lba assignment breakage
  MAINTAINERS: Add target-devel list for drivers/target/
  iscsi-target: Fix CONFIG_SMP=n and CONFIG_MODULES=n build failure
  iscsi-target: Fix snprintf usage with MAX_PORTAL_LEN
  iscsi-target: Fix uninitialized usage of cmd->pad_bytes
  iscsi-target: strlen() doesn't count the terminator
  iscsi-target: Fix NULL dereference on allocation failure

* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6:
  dt: add of_alias_scan and of_alias_get_id

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: use kzalloc in ext4_kzalloc()

We may optimistically check .in_use == 0 without holding the rw_mutex:
it's the common case, and if it's zero, there certainly won't be any
segments associated with us.

After taking the lock, the idr_for_each() will do the right thing, so we
could now drop the re-check inside the lock without any real cost.  But
it won't hurt.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 4c677e2e ("shm: optimize locking and ipc_namespace getting")
introduced a copy-paste bug.  Due to the bug cycle optimizations were
disabled.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Expand the fs/Kconfig "help" info to clarify why it's a bad idea to
deselect the TMPFS_POSIX_ACL config variable.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the radix_tree exceptional cases, mostly in filemap.c, clearer.

It's hard to devise a suitable snappy name that illuminates the use by
shmem/tmpfs for swap, while keeping filemap/pagecache/radix_tree
generality.  And akpm points out that /* radix_tree_deref_retry(page) */
comments look like calls that have been commented out for unknown
reason.

Skirt the naming difficulty by rearranging these blocks to handle the
transient radix_tree_deref_retry(page) case first; then just explain the
remaining shmem/tmpfs swap case in a comment.
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have already acknowledged that swapoff of a tmpfs file is slower than
it was before conversion to the generic radix_tree: a little slower
there will be acceptable, if the hotter paths are faster.

But it was a shock to find swapoff of a 500MB file 20 times slower on my
laptop, taking 10 minutes; and at that rate it significantly slows down
my testing.

Now, most of that turned out to be overhead from PROVE_LOCKING and
PROVE_RCU: without those it was only 4 times slower than before; and
more realistic tests on other machines don't fare as badly.

I've tried a number of things to improve it, including tagging the swap
entries, then doing lookup by tag: I'd expected that to halve the time,
but in practice it's erratic, and often counter-productive.

The only change I've so far found to make a consistent improvement, is
to short-circuit the way we go back and forth, gang lookup packing
entries into the array supplied, then shmem scanning that array for the
target entry.  Scanning in place doubles the speed, so it's now only
twice as slow as before (or three times slower when the PROVEs are on).

So, add radix_tree_locate_item() as an expedient, once-off,
single-caller hack to do the lookup directly in place.  #ifdef it on
CONFIG_SHMEM and CONFIG_SWAP, as much to document its limited
applicability as save space in other configurations.  And, sadly,
#include sched.h for cond_resched().
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove PageSwapBacked (!page_is_file_cache) cases from
add_to_page_cache_locked() and add_to_page_cache_lru(): those pages now
go through shmem_add_to_page_cache().

Remove a comment on maximum tmpfs size from fsstack_copy_inode_size(),
and add a comment on swap entries to invalidate_mapping_pages().

And mincore_page() uses find_get_page() on what might be shmem or a
tmpfs file: allow for a radix_tree_exceptional_entry(), and proceed to
find_get_page() on swapper_space if so (oh, swapper_space needs #ifdef).
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

But we've not yet removed the old swp_entry_t i_direct[16] from
shmem_inode_info.  That's because it was still being shared with the
inline symlink.  Remove it now (saving 64 or 128 bytes from shmem inode
size), and use kmemdup() for short symlinks, say, those up to 128 bytes.

I wonder why mpol_free_shared_policy() is done in shmem_destroy_inode()
rather than shmem_evict_inode(), where we usually do such freeing? I
guess it doesn't matter, and I'm not into NUMA mpol testing right now.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert shmem_writepage() to use shmem_delete_from_page_cache() to use
shmem_radix_tree_replace() to substitute swap entry for page pointer
atomically in the radix tree.

As with shmem_add_to_page_cache(), it's not entirely satisfactory to be
copying such code from delete_from_swap_cache, but again judged easier
to sell than making its other callers go through the extras.

Remove the toy implementation's shmem_put_swap() and shmem_get_swap(),
now unreferenced, and the hack to disable swap: it's now good to go.

The way things have worked out, info->lock no longer helps to guard the
shmem_swaplist: we increment swapped under shmem_swaplist_mutex only.
That global mutex exclusion between shmem_writepage() and shmem_unuse()
is not pretty, and we ought to find another way; but it's been forced on
us by recent race discoveries, not a consequence of this patchset.

And what has become of the WARN_ON_ONCE(1) free_swap_and_cache() if a
swap entry was found already present? That's no longer possible, the
(unknown) one inserting this page into filecache would hit the swap
entry occupying that slot.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove mem_cgroup_shmem_charge_fallback(): it was only required when we
had to move swappage to filecache with GFP_NOWAIT.

Remove the GFP_NOWAIT special case from mem_cgroup_cache_charge(), by
moving its call out from shmem_add_to_page_cache() to two of thats three
callers.  But leave it doing mem_cgroup_uncharge_cache_page() on error:
although asymmetrical, it's easier for all 3 callers to handle.

These two changes would also be appropriate if anyone were to start
using shmem_read_mapping_page_gfp() with GFP_NOWAIT.

Remove mem_cgroup_get_shmem_target(): mc_handle_file_pte() can test
radix_tree_exceptional_entry() to get what it needs for itself.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert shmem_getpage_gfp(), the engine-room of shmem, to expect page or
swap entry returned from radix tree by find_lock_page().

Whereas the repetitive old method proceeded mainly under info->lock,
dropping and repeating whenever one of the conditions needed was not
met, now we can proceed without it, leaving shmem_add_to_page_cache() to
check for a race.

This way there is no need to preallocate a page, no need for an early
radix_tree_preload(), no need for mem_cgroup_shmem_charge_fallback().

Move the error unwinding down to the bottom instead of repeating it
throughout.  ENOSPC handling is a little different from before: there is
no longer any race between find_lock_page() and finding swap, but we can
arrive at ENOSPC before calling shmem_recalc_inode(), which might
occasionally discover freed space.

Be stricter to check i_size before returning.  info->lock is used for
little but alloced, swapped, i_blocks updates.  Move i_blocks updates
out from under the max_blocks check, so even an unlimited size=0 mount
can show accurate du.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert shmem_unuse_inode() to use a lockless gang lookup of the radix
tree, searching for matching swap.

This is somewhat slower than the old method: because of repeated radix
tree descents, because of copying entries up, but probably most because
the old method noted and skipped once a vector page was cleared of swap.
Perhaps we can devise a use of radix tree tagging to achieve that later.

shmem_add_to_page_cache() uses shmem_radix_tree_replace() to compensate
for the lockless lookup by checking that the expected entry is in place,
under lock.  It is not very satisfactory to be copying this much from
add_to_page_cache_locked(), but I think easier to sell than insisting
that every caller of add_to_page_cache*() go through the extras.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Disable the toy swapping implementation in shmem_writepage() - it's hard
to support two schemes at once - and convert shmem_truncate_range() to a
lockless gang lookup of swap entries along with pages, freeing both.

Since the second loop tightens its noose until all entries of either
kind have been squeezed out (and we shall make sure that there's not an
instant when neither is visible), there is no longer a need for yet
another pass below.

shmem_radix_tree_replace() compensates for the lockless lookup by
checking that the expected entry is in place, under lock, before
replacing it.  Here it just deletes, but will be used in later patches
to substitute swap entry for page or page for swap entry.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bring truncate.c's code for truncate_inode_pages_range() inline into
shmem_truncate_range(), replacing its first call (there's a followup
call below, but leave that one, it will disappear next).

Don't play with it yet, apart from leaving out the cleancache flush, and
(importantly) the nrpages == 0 skip, and moving shmem_setattr()'s
partial page preparation into its partial page handling.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While it's at its least, make a number of boring nitpicky cleanups to
shmem.c, mostly for consistency of variable naming.  Things like "swap"
instead of "entry", "pgoff_t index" instead of "unsigned long idx".

And since everything else here is prefixed "shmem_", better change
init_tmpfs() to shmem_init().
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The maximum size of a shmem/tmpfs file has been limited by the maximum
size of its triple-indirect swap vector.  With 4kB page size, maximum
filesize was just over 2TB on a 32-bit kernel, but sadly one eighth of
that on a 64-bit kernel.  (With 8kB page size, maximum filesize was just
over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel,
MAX_LFS_FILESIZE being then more restrictive than swap vector layout.)

It's a shame that tmpfs should be more restrictive than ramfs, and this
limitation has now been noticed.  Add another level to the swap vector?
No, it became obscure and hard to maintain, once I complicated it to
make use of highmem pages nine years ago: better choose another way.

Surely, if 2.4 had had the radix tree pagecache introduced in 2.5, then
tmpfs would never have invented its own peculiar radix tree: we would
have fitted swap entries into the common radix tree instead, in much the
same way as we fit swap entries into page tables.

And why should each file have a separate radix tree for its pages and
for its swap entries? The swap entries are required precisely where and
when the pages are not.  We want to put them together in a single radix
tree: which can then avoid much of the locking which was needed to
prevent them from being exchanged underneath us.

This also avoids the waste of memory devoted to swap vectors, first in
the shmem_inode itself, then at least two more pages once a file grew
beyond 16 data pages (pages accounted by df and du, but not by memcg).
Allocated upfront, to avoid allocation when under swapping pressure, but
pure waste when CONFIG_SWAP is not set - I have never spattered around
the ifdefs to prevent that, preferring this move to sharing the common
radix tree instead.

There are three downsides to sharing the radix tree.  One, that it binds
tmpfs more tightly to the rest of mm, either requiring knowledge of swap
entries in radix tree there, or duplication of its code here in shmem.c.
I believe that the simplications and memory savings (and probable higher
performance, not yet measured) justify that.

Two, that on HIGHMEM systems with SWAP enabled, it's the lowmem radix
nodes that cannot be freed under memory pressure - whereas before it was
the less precious highmem swap vector pages that could not be freed.
I'm hoping that 64-bit has now been accessible for long enough, that the
highmem argument has grown much less persuasive.

Three, that swapoff is slower than it used to be on tmpfs files, since
it's using a simple generic mechanism not tailored to it: I find this
noticeable, and shall want to improve, but maybe nobody else will
notice.

So...  now remove most of the old swap vector code from shmem.c.  But,
for the moment, keep the simple i_direct vector of 16 pages, with simple
accessors shmem_put_swap() and shmem_get_swap(), as a toy implementation
to help mark where swap needs to be handled in subsequent patches.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If swap entries are to be stored along with struct page pointers in a
radix tree, they need to be distinguished as exceptional entries.

Most of the handling of swap entries in radix tree will be contained in
shmem.c, but a few functions in filemap.c's common code need to check
for their appearance: find_get_page(), find_lock_page(),
find_get_pages() and find_get_pages_contig().

So as not to slow their fast paths, tuck those checks inside the
existing checks for unlikely radix_tree_deref_slot(); except for
find_lock_page(), where it is an added test.  And make it a BUG in
find_get_pages_tag(), which is not applied to tmpfs files.

A part of the reason for eliminating shmem_readpage() earlier, was to
minimize the places where common code would need to allow for swap
entries.

The swp_entry_t known to swapfile.c must be massaged into a slightly
different form when stored in the radix tree, just as it gets massaged
into a pte_t when stored in page tables.

In an i386 kernel this limits its information (type and page offset) to
30 bits: given 32 "types" of swapfile and 4kB pagesize, that's a maximum
swapfile size of 128GB.  Which is less than the 512GB we previously
allowed with X86_PAE (where the swap entry can occupy the entire upper
32 bits of a pte_t), but not a new limitation on 32-bit without PAE; and
there's not a new limitation on 64-bit (where swap filesize is already
limited to 16TB by a 32-bit page offset).  Thirty areas of 128GB is
probably still enough swap for a 64GB 32-bit machine.

Provide swp_to_radix_entry() and radix_to_swp_entry() conversions, and
enforce filesize limit in read_swap_header(), just as for ptes.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A patchset to extend tmpfs to MAX_LFS_FILESIZE by abandoning its
peculiar swap vector, instead keeping a file's swap entries in the same
radix tree as its struct page pointers: thus saving memory, and
simplifying its code and locking.

This patch:

The radix_tree is used by several subsystems for different purposes.  A
major use is to store the struct page pointers of a file's pagecache for
memory management.  But what if mm wanted to store something other than
page pointers there too?

The low bit of a radix_tree entry is already used to denote an indirect
pointer, for internal use, and the unlikely radix_tree_deref_retry()
case.

Define the next bit as denoting an exceptional entry, and supply inline
functions radix_tree_exception() to return non-0 in either unlikely
case, and radix_tree_exceptional_entry() to return non-0 in the second
case.

If a subsystem already uses radix_tree with that bit set, no problem: it
does not affect internal workings at all, but is defined for the
convenience of those storing well-aligned pointers in the radix_tree.

The radix_tree_gang_lookups have an implicit assumption that the caller
can deduce the offset of each entry returned e.g.  by the page->index of
a struct page.  But that may not be feasible for some kinds of item to
be stored there.

radix_tree_gang_lookup_slot() allow for an optional indices argument,
output array in which to return those offsets.  The same could be added
to other radix_tree_gang_lookups, but for now keep it to the only one
for which we need it.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

i386 allmodconfig:

  drivers/built-in.o: In function `aat2870_bl_remove':
  aat2870_bl.c:(.text+0x414f9): undefined reference to `backlight_device_unregister'
  drivers/built-in.o: In function `aat2870_bl_probe':
  aat2870_bl.c:(.text+0x418fc): undefined reference to `backlight_device_register'
  aat2870_bl.c:(.text+0x41a31): undefined reference to `backlight_device_unregiste

Cc: Jin Park <jinyoungp@nvidia.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Axel Lin <axel.lin@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

 - Current implementation tests wrong value for setting
   aat2870_bl->max_current.

 - In the current implementation, we cannot differentiate between 2 cases:

   a) if pdata->max_current is not set , or

   b) pdata->max_current is set to AAT2870_CURRENT_0_45 (which is also 0).

   Fix it by setting AAT2870_CURRENT_0_45 to be 1 and adjust the equation in
   aat2870_brightness() accordingly.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Tested-by: NJin Park <jinyoungp@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

backlight_device_register() returns ERR_PTR() on error.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jin Park <jinyoungp@nvidia.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix:

  arch/cris/arch-v10/kernel/irq.c:239: error: implicit declaration of function 'kgdb_init'
  arch/cris/arch-v10/kernel/irq.c:240: error: implicit declaration of function 'breakpoint'

Declare these two functions.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix:

  arch/cris/arch-v10/drivers/sync_serial.c:961: error: conflicting types for 'sync_serial_ioctl'
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix:

  arch/cris/arch-v10/drivers/sync_serial.c:628: error: 'ret' undeclared (first use in this function)

'ret' should be 'err'.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix this error:

  kernel/fork.c:267: error: implicit declaration of function 'alloc_thread_info_node'

This is due to renaming alloc_thread_info() to alloc_thread_info_node().

[akpm@linux-foundation.org: coding-style fixes]
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix tpm_tis.c build when CONFIG_ACPI is not enabled by providing a stub
function.  Fixes many build errors/warnings:

  drivers/char/tpm/tpm_tis.c:89: error: dereferencing pointer to incomplete type
  drivers/char/tpm/tpm_tis.c:89: warning: type defaults to 'int' in declaration of 'type name'
  drivers/char/tpm/tpm_tis.c:89: error: request for member 'list' in something not a structure or union
  ...
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Leendert van Doorn <leendert@watson.ibm.com>
Cc: James Morris <jmorris@namei.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_OTHER_NODE is used for NUMA allocations on behalf of other nodes.
It's supposed to be passed through from the page allocator to
zone_statistics(), but it never gets there as gfp_allowed_mask is not
wide enough and masks out the flag early in the allocation path.

The result is an accounting glitch where successful NUMA allocations
by-agent are not properly attributed as local.

Increase __GFP_BITS_SHIFT so that it includes __GFP_OTHER_NODE.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the module parameters when platform data is used.  This means
that they can be read from /sys/module/ramoops/parameters in order to
parse the memory area.
Signed-off-by: NSergiu Iordache <sergiu@chromium.org>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update kernel-parameters.txt to point users to the authoritative comment
for name_to_dev_t.  In addition, updates other places where some
name_to_dev_t behavior was discussed.  All other references to root=
appear to be for explicit sample usage or just side comments when
discussing other kernel parameters.
Signed-off-by: NWill Drewry <wad@chromium.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix new kernel-doc warning in fs/dcache.c:

  Warning(fs/dcache.c:797): No description found for parameter 'sb'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current hyper-optimized functions are overkill if you simply want to
allocate an id for a device.  Create versions which use an internal
lock.

In followup patches, numerous drivers are converted to use this
interface.

Thanks to Tejun for feedback.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When send_cpu_listeners() finds the orphaned listener it marks it as
!valid and drops listeners->sem.  Before it takes this sem for writing,
s->pid can be reused and add_del_listener() can wrongly try to re-use
this entry.

Change add_del_listener() to check ->valid = T.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NVasiliy Kulikov <segoon@openwall.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

1. Commit 26c4caea "don't allow duplicate entries in listener mode"
   changed add_del_listener(REGISTER) so that "next_cpu:" can reuse the
   listener allocated for the previous cpu, this doesn't look exactly
   right even if minor.

   Change the code to kfree() in the already-registered case, this case
   is unlikely anyway so the extra kmalloc_node() shouldn't hurt but
   looke more correct and clean.

2. use the plain list_for_each_entry() instead of _safe() to scan
   listeners->list.

3. Remove the unneeded INIT_LIST_HEAD(&s->list), we are going to
   list_add(&s->list).
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NVasiliy Kulikov <segoon@openwall.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: NJerome Marchand <jmarchan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As the comment explains, the intention of the code is to clear the
OMAP_RTC_CTRL_MODE_12_24 bit, but instead it only clears the
OMAP_RTC_CTRL_SPLIT and OMAP_RTC_CTRL_AUTO_COMP bits, which should be
kept.  OMAP_RTC_CTRL_DISABLE, OMAP_RTC_CTRL_SET_32_COUNTER,
OMAP_RTC_CTRL_TEST, and OMAP_RTC_CTRL_ROUND_30S are also better off
being cleared.
Signed-off-by: NDaniel Glöckner <dg@emlix.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

init_fault_attr_dentries() is used to export fault_attr via debugfs.
But it can only export it in debugfs root directory.

Per Forlin is working on mmc_fail_request which adds support to inject
data errors after a completed host transfer in MMC subsystem.

The fault_attr for mmc_fail_request should be defined per mmc host and
export it in debugfs directory per mmc host like
/sys/kernel/debug/mmc0/mmc_fail_request.

init_fault_attr_dentries() doesn't help for mmc_fail_request.  So this
introduces fault_create_debugfs_attr() which is able to create a
directory in the arbitrary directory and replace
init_fault_attr_dentries().

[akpm@linux-foundation.org: extraneous semicolon, per Randy]
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Tested-by: NPer Forlin <per.forlin@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 9933fc0ai (ext4: introduce ext4_kvmalloc(), ext4_kzalloc(), and
ext4_kvfree()) intruduced wrappers around k*alloc/vmalloc but introduced
a typo for ext4_kzalloc() by not using kzalloc() but kmalloc().
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The patch adds function of_alias_scan to populate a global lookup
table with the properties of 'aliases' node and function
of_alias_get_id for drivers to find alias id from the lookup table.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
[grant.likely: add locking and rework parse loop]
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Problem: HW DDP context was not invalidated in case of ABORTS, etc...
This leads to the problem where memory pages which are used for DDP
as user descriptor could get reused for some other purpose (such as to
satisfy new memory allocation request either by kernel or user mode threads)
and since HW DDP context was not invalidated, HW continue to write to
those pages, hence causing memory corruption.

Fix: Either on incoming ABORTS or due to exchange time out, allowed the
target to cleanup HW DDP context if it was setup for respective ft_cmd.
Added new function to perform this cleanup, furthur it can be enhanced
for other cleanup activity.  Fix ft_recv_write_data() to properly handle
fc_frame_payload_get to return pointer to payload if it exist. If there is
no payload which is most common case (+ve case in case if DDP is working
as expected, it will return NULL. Yes, scope of buf is limited to printk.
Invalidation of HW context (which is done inside ft_invl_hw_context() is
necessary in SUCCESS and FAILURE case of DDP. Hence invalidation is DONE
as long as there was DDP setup (whether it worked correctly or not,

NOTE: For some reason, if there is any error w.r.t DDP such as out of
order packet reception, HW simply post the full packet in rx queue.
Signed-off-by: NKiran Patil <kiran.patil@intel.com>
Cc: Robert W Love <robert.w.love@intel.com>
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>