- 06 12月, 2006 30 次提交
-
-
由 Paul Mundt 提交于
The end of the store queue bitmap is miscalculated when searching for a free range in sq_remap(), missing the PAGE_SHIFT shift that's done in sq_api_init(). This runs in to workloads where we can scan beyond the end of the bitmap. Spotted by Paul Jackson: http://marc.theaimsgroup.com/?l=linux-kernel&m=116493191224097&wSigned-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This makes the early printk support somewhat more flexible, moving the port definition to a config option, and making the port initialization configurable for sh-ipl+g users. At the same time, this allows us to trivially wire up the SH7780 SCIF0, so that's thrown in too more or less for free. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
There were a number of places that made evil PAGE_SIZE == 4k assumptions that ended up breaking when trying to play with 8k and 64k page sizes, this fixes those up. The most significant change is the way we load THREAD_SIZE, previously this was done via: mov #(THREAD_SIZE >> 8), reg shll8 reg to avoid a memory access and allow the immediate load. With a 64k PAGE_SIZE, we're out of range for the immediate load size without resorting to special instructions available in later ISAs (movi20s and so on). The "workaround" for this is to bump up the shift to 10 and insert a shll2, which gives a bit more flexibility while still being much cheaper than a memory access. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
There was a clobber issue with the register we were saving the stack in, so we switch to a register that we handle in the clobber list properly already. This also follows the x86 changes for allowing the softirq checks from hardirq context. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Mark Glaisher 提交于
This extends the SH DMA API for allowing handling of DMA channels based off of their respective capabilities. A couple of functions are added to the existing API, the core bits are register_chan_caps() for registering channel capabilities, and request_dma_bycap() for fetching a channel dynamically based off of a capability set. Signed-off-by: NMark Glaisher <mark.glaisher@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Pass along the dev_id from request_dma() all the way down, rather than inserting an artificial name relating to the TEI line that we were doing before. This makes the line a bit less obvious, but dev_id is the proper behaviour for this regardless. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Previously we linked in the ISA DMA wrapper unconditionally. As there are very few users of this, it's better to make it conditional. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Handle the case where no registered DMACs exist somewhat more gracefully. While we're at it, check for sysdev_create_file() failing. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
The implementation of system call tracing in the kernel has a couple of ordering problems: - the validity of the system call number is checked before calling out to system call tracing code, and should be done after - the system call number used when tracing is the one the system call was invoked with, while the system call tracing code can legitimatly change the call number (for example strace permutes fork into clone) This patch fixes both of these problems, and also reoders the code slightly to make the direct path through the code the common case. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
Two of the fields in /proc/[number]/stat are documented in proc(5) as: kstkesp %lu The current value of esp (stack pointer), as found in the kernel stack page for the process. kstkeip %lu The current EIP (instruction pointer). The SH currently prints the the last SP and PC of the process inside the kernel, while most other archs use the last user space values. This patch modifes the SH to display the user space values. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
Handle simple TLB miss faults which can be resolved completely from the page table in assembler. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This adds simple push-switch support for the RDBRP-1/RDBREVRP-1 debug boards found on the R7780RP-1. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This adds support for a generic push switch framework. Adaptable for various switches, including GPIO switches and the push switches commonly found on Renesas debug boards. This allows switch states to be trivially reported through sysfs. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
Remove extra bits from the pmd structure and store a kernel logical address rather than a physical address. This allows it to be directly dereferenced. Another piece of wierdness inherited from x86. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
Add TTB accessor functions and give it a sensible default value. We will use this later for optimizing the fault path. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
Remove the previous saving of fault codes into the thread_struct as they are never used, and appeared to be inherited from x86. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
This fixes up the kernel for gcc4. The existing exception handlers needed some wrapping for pt_regs access, acessing the registers via a RELOC_HIDE() pointer. The strcpy() issues popped up here too, so add -ffreestanding and kill off the symbol export. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Previously big endian was simply assumed if little endian was not set, which led to some cflags ordering issues. There's not much point to not having a big endian option, so shove one in a choice and wire it up in the Makefile. This lets us clean up some of the cflags ordering while we're at it. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Simple sem2mutex conversion for the p3map semaphores. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This adds some preliminary support for the SH-X2 MMU, used by newer SH-4A parts (particularly SH7785). This MMU implements a 'compat' mode with SH-X MMUs and an 'extended' mode for SH-X2 extended features. Extended features include additional page sizes (8kB, 4MB, 64MB), as well as the addition of page execute permissions. The extended mode attributes are placed in a second data array, which requires us to switch to 64-bit PTEs when in X2 mode. With the addition of the exec perms, we also overhaul the mmap prots somewhat, now that it's possible to handle them more intelligently. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Simple 7785 placeholders to start hooking up other bits of code. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This drops the various IRQ headers that were floating around and primarily providing hardcoded IRQ definitions for the various CPU subtypes. This quickly got to be an unmaintainable mess, made even more evident by the subtle breakage introduced by the SH-2 and SH-2A changes. Now that subtypes are able to register IRQ maps directly, just rip all of the headers out. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
All of the various CPU subtypes currently hardcode TIMER_IRQ, switch this to a config option in the few places we need this. This allows further removal of hardcoded IRQ headers.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The nommu patches broke the path for the common bits, get it building for the SH-3/4 case again. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
A number of API changes happened underneath the 7206 patches, update for everything that broke. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
This adds support for the Solution Engine 7206 and 7619. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
Mostly SH-2 wrappers.. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
This splits out common bits from the existing exception handler for use between SH-2/SH-2A and SH-3/4, and adds support for the SH-2/2A exceptions. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
SH-2A has special division hardware as opposed to a full-fledged FPU, wire up the exception handlers for this. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
This implements initial support for the SH7206 (SH-2A) and SH7619 (SH-2) MMU-less CPUs. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 05 12月, 2006 10 次提交
-
-
由 Matthew Wilcox 提交于
CONFIG_LBD and CONFIG_LSF are spread into asm/types.h for no particularly good reason. Centralising the definition in linux/types.h means that arch maintainers don't need to bother adding it, as well as fixing the problem with x86-64 users being asked to make a decision that has absolutely no effect. The H8/300 porters seem particularly confused since I'm not aware of any microcontrollers that need to support 2TB filesystems. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://brick.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] blktrace: don't return blktrace_seq from trace_note() [PATCH] blktrace: uninline trace_note()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (31 commits) ocfs2: implement i_op->permission configfs: make configfs_dirent_exists() static ocfs2: update file system paths to set atime ocfs2: core atime update functions ocfs2: Add splice support ocfs2: Remove ocfs2_write_should_remove_suid() [PATCH] Export should_remove_suid() configfs: mutex_lock_nested() fix ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t ocfs2: remove handle argument to ocfs2_start_trans() ocfs2: remove ocfs2_journal_handle journal field ocfs2: pass ocfs2_super * into ocfs2_commit_trans() ocfs2: remove unused handle argument from ocfs2_meta_lock_full() ocfs2: make ocfs2_alloc_handle() static ocfs2: remove unused ocfs2_handle_add_lock() ocfs2: remove unused ocfs2_handle_add_inode() ocfs2: Don't allocate handle early in ocfs2_rename() ocfs2: don't use handle for locking in allocation functions ocfs2: don't pass handle to ocfs2_meta_lock in ocfs2_rename() ocfs2: don't pass handle to ocfs2_meta_lock in ocfs2_symlink() ...
-
由 Al Viro 提交于
ip_summed changes last summer had missed that one. As the result, we have ip_summed interpreted as CHECKSUM_PARTIAL now. IOW, ->csum is interpreted as offset of checksum in the packet. net/core/* will both read and modify the value as that offset, with obvious reasons. At the very least it's a remote memory corruptor. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Cleanup memory barriers for weakly ordered systems. [MIPS] Alchemy: Automatically enable CONFIG_RESOURCES_64BIT for PCI configs. [MIPS] Unify csum_partial.S [MIPS] SWARM: Fix a typo in #error directives [MIPS] Fix atomic.h build errors. [MIPS] Use SYSVIPC_COMPAT to fix various problems on N32 [MIPS] klconfig add missing bracket
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (194 commits) [POWERPC] Add missing EXPORTS for mpc52xx support [POWERPC] Remove obsolete PPC_52xx and update CLASSIC32 comment [POWERPC] ps3: add a default zImage target [POWERPC] Add of_platform_bus support to mpc52xx psc uart driver [POWERPC] typo fix and whitespace cleanup on mpc52xx-uart driver [POWERPC] Fix debug printks for 32-bit resources in the PCI code [POWERPC] Replace kmalloc+memset with kzalloc [POWERPC] Linkstation / kurobox support [POWERPC] Add the e300c3 core to the CPU table. [POWERPC] ppc: m48t35 add missing bracket [POWERPC] iSeries: don't build head_64.o unnecessarily [POWERPC] iSeries: stop dt_mod.o being rebuilt unnecessarily [POWERPC] Fix cputable.h for combined build [POWERPC] Allow CONFIG_BOOTX_TEXT on iSeries [POWERPC] Allow xmon to build on legacy iSeries [POWERPC] Change ppc64_defconfig to use AUTOFS_V4 not V3 [POWERPC] Tell firmware we can handle POWER6 compatible mode [POWERPC] Clean images in arch/powerpc/boot [POWERPC] Fix OF pci flags parsing [POWERPC] defconfig for lite5200 board ...
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
The support for the 52xx-based systems is now included under CONFIG_CLASSIC32, since the 52xx chips have a 603e-based core. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add a powerpc make target that can be loaded by the ps3 bootloader (kboot) and set this as the default image to build for that platform. Until the compressed zImage wrapper is made, this arranges for a stripped vmlinux image to be built. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-