- 31 5月, 2014 8 次提交
-
-
由 Arnd Bergmann 提交于
This makes it possible to enable the Exynos platform as part of a multiplatform kernel. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
Instead of repeating the Kconfig entries for every SoC, move them under ARCH_EXYNOS3, 4 and 5 and move the entries common to 3, 4 and 5 under ARCH_EXYNOS. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tarek Dakhran 提交于
EXYNOS5410 is SoC in Samsung's Exynos5 SoC series. Add initial support for this SoC. Signed-off-by: NTarek Dakhran <t.dakhran@samsung.com> Signed-off-by: NVyacheslav Tyrtov <v.tyrtov@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Chanwoo Choi 提交于
This patch fix the offset of CPU boot address and don't need to send smc call of SMC_CMD_CPU1BOOT command for secondary CPU boot because Exynos3250 removes WFE in secure mode. Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Chanwoo Choi 提交于
This patch add Exynos3250's SoC ID. Exynos 3250 is SoC that is based on the 32-bit RISC processor for Smartphone. Exynos3250 uses Cortex-A7 dual cores and has a target speed of 1.0GHz. Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Arun Kumar K 提交于
Exynos5800 is an octa core SoC which is based on the 5420 platform. This patch adds the basic support for it in the mach-exynos. Signed-off-by: NArun Kumar K <arun.kk@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Pankaj Dubey 提交于
This patch add basic arch side support for exynos5260 SoC. Note that this is required to enable build for clock driver. Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
-
- 26 5月, 2014 12 次提交
-
-
由 Cho KyongHo 提交于
This patch adds the missing sysmmu clocks for Display and ISP blocks. Signed-off-by: NCho KyongHo <pullip.cho@samsung.com> Signed-off-by: NShaik Ameer Basha <shaik.ameer@samsung.com> Acked-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jonghwan Choi 提交于
Commit 7da83a80 ("ARM: EXYNOS: Migrate Exynos specific macros from plat to mach") which lands in samsung tree causes build breakage for cpufreq-exynos like following: drivers/cpufreq/exynos-cpufreq.c: In function 'exynos_cpufreq_probe': drivers/cpufreq/exynos-cpufreq.c:166:2: error: implicit declaration of function 'soc_is_exynos4210' [-Werror=implicit-function-declaration] drivers/cpufreq/exynos-cpufreq.c:168:2: error: implicit declaration of function 'soc_is_exynos4212' [-Werror=implicit-function-declaration] drivers/cpufreq/exynos-cpufreq.c:168:2: error: implicit declaration of function 'soc_is_exynos4412' [-Werror=implicit-function-declaration] drivers/cpufreq/exynos-cpufreq.c:170:2: error: implicit declaration of function 'soc_is_exynos5250' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[2]: *** [drivers/cpufreq/exynos-cpufreq.o] Error 1 make[2]: *** Waiting for unfinished jobs.... drivers/cpufreq/exynos4x12-cpufreq.c: In function 'exynos4x12_set_clkdiv': drivers/cpufreq/exynos4x12-cpufreq.c:118:2: error: implicit declaration of function 'soc_is_exynos4212' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[2]: *** [drivers/cpufreq/exynos4x12-cpufreq.o] Error 1 make[1]: *** [drivers/cpufreq] Error 2 This fixes above error with getting SoC information via of_machine_is_compatible() instead of soc_is_exynosXXXX(). Suggested-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com> [kgene.kim@samsung.com: fixed typo and modified as per Viresh's suggestion] [kgene.kim@samsung.com: Rafael agreed] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Heiko Stuebner 提交于
Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Heiko Stuebner 提交于
This removes the need for mach/-headers in the debug macro. Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Heiko Stuebner 提交于
Using the lowlevel debug uart is a corner case - even more so in a multiplatform environment. So it seems reasonable to simply let the developer set the appropriate uart type for the debugged SoC. Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Heiko Stuebner 提交于
addruart from the generic debug macro is doing exactly the same using the common lowlevel uart definition, so there is no cause for this special casing for s3c24xx. Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
Exynos specific macros and declarations have been moved to mach-exynos. Inclusion of plat/cpu.h is no more necessary. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
Move Exynos specific macros to mach-exynos from plat-samsung to avoid unnecessary dependency on plat based header files. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
'exynos_subsys' has no users. Remove this code. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
Group all files compiled under common config option together. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Leela Krishna Amudala 提交于
A common macro v7_exit_coherency_flush available which does the below tasks in the seqeunce. -clearing C bit -clearing L1 cache -exit SMP -instruction and data synchronization So removing the local functions which does the same thing and use the macro instead. Signed-off-by: NLeela Krishna Amudala <leela.krishna@linaro.org> Acked-by: NNicolas Pitre <nico@linaro.org> [cw00.choi@samsung.com: tested on exynos3250 based board] Tested-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
-
- 19 5月, 2014 1 次提交
-
-
由 Alim Akhtar 提交于
Exynos5800 clock structure is mostly similar to 5420 with only a small delta changes. So the 5420 clock file is re-used for 5800 also. The common clocks for both are seggreagated and few clocks which are different for both are separately initialized. Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com> Signed-off-by: NArun Kumar K <arun.kk@samsung.com> Acked-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 17 5月, 2014 5 次提交
-
-
由 Chanwoo Choi 提交于
The Exynos3250 clocks are statically listed and registered using the Samsung specific common clock helper functions. Both device tree based clock lookup and clkdev based clock lookups are supported. Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NTomasz Figa <t.figa@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
Merge branch 'for_3.16/exynos3250' of git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into v3.16-next/clk-samsung Pull Samsung clock exynos3250 from Tomasz Figa: "This small pull request contains a patch adding clock driver for Exynos3250, which depends on previous pull requests in this series." Acked-by: NMike Turquette <mturquette@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
Merge branch 'for_3.16/clk_cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into v3.16-next/clk-samsung Pull Samsung clock cleanup from Tomasz Figa: "This pull requests contains minor clean-up related to Samsung clock support, including: 1) move Kconfig entries of Samsung clock drivers to drivers/clk, 2) compile drivers/clk/samsung conditionally when COMMON_CLK_SAMSUNG is selected, 3) remove obsolete Kconfig lines after moving s3c24xx to CCF." Conflicts: arch/arm/mach-s3c24xx/Kconfig Acked-by: NMike Turquette <mturquette@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
Merge branch 'for_3.16/clk_fixes_non_critical' of git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into v3.16-next/clk-samsung Pull Samsung clock non-critical fixes from Tomasz Figa: "This pull requests contains a number of non-critical fixes for Samsung clock framework and drivers, including: 1) a series of fixes for Exynos5420 to correct clock definitions and make the driver closer to the documentation, 2) several missing clocks and clock IDs added to Exynos4, Exynos5250 and Exynos5420 drivers, 3) fix for incorrect initialization of clock table with NULL, 4) compiler warning fix." Acked-by: NMike Turquette <mturquette@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
Merge branch 'for_3.16/exynos5260' of git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into v3.16-next/clk-samsung Pull Samsung clock exynos5260 from Tomasz Figa: "This pull request contains patches preparing Samsung Common Clock Framework helpers to support Exynos5260 by adding support for multiple clock providers and then adding clock driver for Exynos5260." Acked-by: NMike Turquette <mturquette@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 15 5月, 2014 14 次提交
-
-
由 Kukjin Kim 提交于
Missed some changes during re-sorting this branch. So fixed it. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Arun Kumar K 提交于
G2D power domain also controls the CMU block of G2D. Since clock registers can be accessed anytime for viewing clk_summary, it can cause a system crash if g2d power domain is disabled. Signed-off-by: NArun Kumar K <arun.kk@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tushar Behera 提交于
MAU powerdomain provides clocks for Audio sub-system block. This block comprises of the I2S audio controller, audio DMA blocks and Audio sub-system clock registers. Right now, there is no way to hook up power-domains with clock providers. During late boot when this power-domain gets disabled, we get following external abort. Unhandled fault: imprecise external abort (0x1406) at 0x00000000 Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Tested-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
High speed I2C is used on Exynos5 based SoCs. Enable it. The MMC partition for Root filesystem cannot be mounted without this enabling HS-I2C and regulators on many boards are connected HS-I2C bus so the regulators don't come by default without this. Actually, we are not able to get arndale-octa board to boot and mount an MMC partition without this change. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Tested-by: NJavi Merino <javi.merino@arm.com> [kgene.kim@samsung.com: modified description] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Seungwon Jeon 提交于
This change places MDMA1 in disabled node for Exynos5420. If MDMA1 region is configured with secure mode, it makes the boot failure with the following on smdk5420 board. ("Unhandled fault: imprecise external abort (0x1406) at 0x00000000") Thus, arndale-octa board don't need to do the same thing anymore. Signed-off-by: NSeungwon Jeon <tgih.jun@samsung.com> Tested-by: NJavi Merino <javi.merino@arm.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
This patch fixes the offset of CPU boot address and changes the parameter of smc call for SMC_CMD_CPU1BOOT command on exynos4212. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tomasz Figa 提交于
This patch add new the clock drvier of Exynos3250 SoC based on Cortex-A7 using common clock framework. The CMU (Clock Management Unit) of Exynos3250 control PLLs(Phase Locked Loops) and generate system clocks for CPU, buses, and function clocks for individual IPs. The CMU of Exynos3250 includes following clock doamins: - CPU block for Cortex-A7 MPCore processor - LEFTBUS/RIGHTBUS block - TOP block for G3D/MFC/LCD0/ISP/CAM/FSYS/MFC/PERIL/PERIR Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NHyunhee Kim <hyunhee.kim@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NKarol Wrona <k.wrona@samsung.com> Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org>
-
由 Pankaj Dubey 提交于
This patch replaces PLAT_SAMSUNG with COMMON_CLK_SAMSUNG for Samsung common clock support. Any Samsung SoC want to use Samsung common clock infrastructure can simply select COMMON_CLK_SAMSUNG. CC: Mike Turquette <mturquette@linaro.org> Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Pankaj Dubey 提交于
This patch moves S3C24XX specific clock Kconfig options into "clk/samsung/Kconfig" and also removes COMMON_CLK selection from "mach-s3c24xx/Kconfig" as S3C24XX_COMMON_CLK is selecting it's dependency. CC: Ben Dooks <ben-linux@fluff.org> CC: Kukjin Kim <kgene.kim@samsung.com> CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Pankaj Dubey 提交于
This patch selects COMMON_CLK_SAMSUNG for EXYNOS and S3C64XX SoC and removes COMMON_CLK selection as COMMON_CLK_SAMSUNG selects it's dependency. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Pankaj Dubey 提交于
This patch adds new Kconfig file for adding new COMMON_CLK_SAMSUNG option. Samsung platforms can select this for using common clock infrastructure. CC: Mike Turquette <mturquette@linaro.org> Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Tomasz Figa 提交于
After full migration of s3c24xx to Common Clock Framework, some unneeded entries in Kconfig still remained. Delete them. Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Shaik Ameer Basha 提交于
This patch adds more register offsets to the list for preserving their values during S2R. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NShaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Shaik Ameer Basha 提交于
This patch adds some missing miscellaneous clocks specific to exynos5420. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NShaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-