- 19 5月, 2012 13 次提交
-
-
由 Eric Dumazet 提交于
Call consume_skb() in place of kfree_skb() were appropriate. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Mostly bool conversions, some inline removals and const additions. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We already unconditionally dereference 'sk' via lock_sock(sk) earlier in this function, and our caller (sock_do_ioctl()) makes takes similar liberties. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Quoting Tore Anderson from : If the allfrag feature has been set on a host route (due to an ICMPv6 Packet Too Big received indicating a MTU of less than 1280), TCP SYN/ACK packets to that destination appears to get an incorrect TCP checksum. This in turn means they are thrown away as invalid. In the case of an IPv4 client behind a link with a MTU of less than 1260, accessing an IPv6 server through a stateless translator, this means that the client can only download a single large file from the server, because once it is in the server's routing cache with the allfrag feature set, new TCP connections can no longer be established. </endquote> It appears ip6_fragment() doesn't handle CHECKSUM_PARTIAL properly. As network drivers are not prepared to fetch correct transport header, a safe fix is to call skb_checksum_help() before fragmenting packet. Reported-by: NTore Anderson <tore@fud.no> Signed-off-by: NEric Dumazet <edumazet@google.com> Tested-by: NTore Anderson <tore@fud.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Move blocks of code around to avoid function prototypes. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Introduce and use a debug macro to test and print. Convert printks to pr_<level>. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Just some stylings. Use #include <linux... not #include <asm... Convert a test and print to a printk_once. Combine an "if (foo) { if (bar) {" to single "if (foo && bar) {" to save an indent level. Convert single line "if (foo) bar;" to multiple lines. Move some braces. Align some long lines a bit better. Long lines and printks with KERN_ checkpatch complaints still exist. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use more current logging styles. Add pr_fmt. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Neaten the comments and reflow the code without changing anything other than whitespace. git diff -w shows just comment neatening and a few line removals. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Somnath Kotur 提交于
Patch re-spin. Incorporated review comments by Ben Hutchings. Signed-off-by: NSuresh Reddy <suresh.reddy@emulex.com> Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com> Acked-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
csummode variable is always CHECKSUM_NONE in ip6_append_data() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Fix two issues introduced in commit a1c7fff7 ( net: netdev_alloc_skb() use build_skb() ) - Must be IRQ safe (non NAPI drivers can use it) - Must not leak the frag if build_skb() fails to allocate sk_buff This patch introduces netdev_alloc_frag() for drivers willing to use build_skb() instead of __netdev_alloc_skb() variants. Factorize code so that : __dev_alloc_skb() is a wrapper around __netdev_alloc_skb(), and dev_alloc_skb() a wrapper around netdev_alloc_skb() Use __GFP_COLD flag. Almost all network drivers now benefit from skb->head_frag infrastructure. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As iwlwifi use fat skbs, it should not pull too much data in skb->head, and particularly no tcp data payload, or splice() is slower, and TCP coalescing is disabled. Copying payload to userland also involves at least two copies (part from header, part from fragment) Each layer will pull its header from the fragment as needed. (on 64bit arches, skb_tailroom(skb) at this point is 192 bytes) With this patch applied, I have a major reduction of collapsed/pruned TCP packets, a nice increase of TCPRcvCoalesce counter, and overall better Internet User experience. Small packets are still using a fragless skb, so that page can be reused by the driver. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Reviewed-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2012 15 次提交
-
-
由 Eric Dumazet 提交于
ipv6_opt_accepted() returns a bool, and can use const pointers ipv6_addr_equal(), ipv6_addr_any(), ipv6_addr_loopback(), ipv6_addr_orchid() return a bool. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
- match() method returns a boolean - return (A && B && C && D) -> return A && B && C && D - fix indentation Signed-off-by: NEric Dumazet <edumazet@google.com>
-
由 David S. Miller 提交于
ECONET is gone, thus this can be deleted as well. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
More spring cleaning! The ancient Econet protocol should go. Most of the bug fixes in recent years have been fixing security vulnerabilities. The hardware hasn't been made since the 90s, it is only interesting as an archeological curiosity. For the truly curious, or insomniac, go read up on it. http://en.wikipedia.org/wiki/EconetSigned-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jaccon Bastiaansen 提交于
The use of the inw/outw functions by the cs89x0 platform driver results in NULL pointer references on ARM platforms and platforms that do not provide ISA-style programmed I/O accessors. Using inw/outw also accesses the wrong address space on platforms that have a PCI I/O space that is not identity-mapped into the physical address space. Signed-off-by: NJaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Enable dynamic debugging and remove a bunch of #ifdef/#endifs. Add a lapb_dbg(level, fmt, ...) macro and replace the printk(KERN_DEBUG uses. Add pr_fmt and remove embedded prefixes. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Gortmaker 提交于
The support for CONFIG_MCA is being removed, since the 20 year old hardware simply isn't capable of meeting today's software demands on CPU and memory resources. This commit removes any MCA specific net drivers, and removes any MCA specific probe/support code from drivers that were doing a dual ISA/MCA role. Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: netdev@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Amir Vadai 提交于
Change the TX ring scheme such that the number of rings for untagged packets and for tagged packets (per each of the vlan priorities) is the same, unlike the current situation where for tagged traffic there's one ring per priority and for untagged rings as the number of core. Queue selection is done as follows: If the mqprio qdisc is operates on the interface, such that the core networking code invoked the device setup_tc ndo callback, a mapping of skb->priority => queue set is forced - for both, tagged and untagged traffic. Else, the egress map skb->priority => User priority is used for tagged traffic, and all untagged traffic is sent through tx rings of UP 0. The patch follows the convergence of discussing that issue with John Fastabend over this thread http://comments.gmane.org/gmane.linux.network/229877 Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Liran Liss <liranl@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
When I first wrote drop monitor I wrote it to just build monolithically. There is no reason it can't be built modularly as well, so lets give it that flexibiity. I've tested this by building it as both a module and monolithically, and it seems to work quite well Change notes: v2) * fixed for_each_present_cpu loops to be more correct as per Eric D. * Converted exit path failures to BUG_ON as per Ben H. v3) * Converted del_timer to del_timer_sync to close race noted by Ben H. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Ben Hutchings <bhutchings@solarflare.com> Reviewed-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
netdev_alloc_skb() is used by networks driver in their RX path to allocate an skb to receive an incoming frame. With recent skb->head_frag infrastructure, it makes sense to change netdev_alloc_skb() to use build_skb() and a frag allocator. This permits a zero copy splice(socket->pipe), and better GRO or TCP coalescing. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eldad Zack 提交于
The padding destination or hop-by-hop option is called Pad1 and not Pad0. See RFC2460 (4.2) or the IANA ipv6-parameters registry: http://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xmlSigned-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Fix some minor problems in comments of etherdevice.h * Warning is out dated, file hasn't moved or disappeared in many years and is unlikely to do so soon. * Capitalize Ethernet consistently since it is a proper name * Fix descriptive comment of padding * Spelling and grammar fix for alignment comment Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
The patch removes unused return value from __delete_item() and delete_item() methods in drivers/net/ppp/pppoe.c. Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
bool conversions where possible. __inline__ -> inline space cleanups Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2012 12 次提交
-
-
由 Matthew Vick 提交于
Under certain scenarios, it's possible that bursty manageability traffic over the BMC-to-OS path may overrun the internal manageability receive buffer causing dropped manageability packets. Clearing this bit prevents this situation by interrupting coalescing to allow manageability traffic through. Signed-off-by: NMatthew Vick <matthew.vick@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
The code seems to want to look at the last byte where the HW puts some information. Since the skb->data area is never seen by the HW I guess it does not work as expected. We pass the page address to the HW so I *think* in order to get to the last byte where the information might be one should use the page buffer and take a look. This is of course not more than just compile tested. Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
According to the comment, errata 23 says that the memory we allocate can't cross a 64KiB boundary. In case of jumbo frames we allocate complete pages which can never cross the 64KiB boundary because PAGE_SIZE should be a multiple of 64KiB so we stop either before the boundary or start after it but never cross it. Furthermore the check seems bogus because it looks at skb->data which is not seen by the HW at all because we only pass the DMA address of the page we allocated. So I *think* the workaround is not required here. Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
This define is needed by i217. Reported-by: NBjorn Mork <bjorn@mork.no> Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Joe Perches 提交于
Use the current logging style. This enables use of dynamic debugging as well. Convert printk(KERN_<LEVEL> to pr_<level>. Add pr_fmt. Remove embedded prefixes, use %s, __func__ instead. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Why use several macros when one will do? Convert the multiple ND_PRINTKx macros to a single ND_PRINTK macro. Use the new net_<level>_ratelimited mechanism too. Add pr_fmt with "ICMPv6: " as prefix. Remove embedded ICMPv6 prefixes from messages. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Convert printk(KERN_DEBUG to pr_debug which can enable dynamic debugging. Remove embedded prefixes from the conversions as pr_fmt adds them. Align arguments. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
bool/const conversions where possible __inline__ -> inline space cleanups Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We test both "!skb_out" and "skb_out" here which is duplicative and causes a static checker warning. I considered that the intent might have been to test "skb_in" but that's a valid pointer here. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use more current logging styles. Add pr_fmt to prefix output appropriately. Convert printks to pr_<level>. Convert PRINTK macros to new l2tp_<level> macros. Neaten some <foo>_refcount debugging macros. Use print_hex_dump_bytes instead of hand-coded loops. Coalesce formats and align arguments. Some KERN_DEBUG output is not now emitted unless dynamic_debugging is enabled. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJames Chapman <jchapman@katalix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
ctnetlink uses the aliases that are created by MODULE_ALIAS_NFCT_HELPER to auto-load the module based on the helper name. Thus, we have to use RAS, Q.931 and H.245, not H.323. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-