- 30 10月, 2013 1 次提交
-
-
由 Shaohua Li 提交于
We switched to plug mq_list for mq, but some code are still using old list. Signed-off-by: NShaohua Li <shli@fusionio.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 29 10月, 2013 1 次提交
-
-
由 Christoph Hellwig 提交于
The flush state machine takes in a struct request, which then is submitted multiple times to the underling driver. The old block code requeses the same request for each of those, so it does not have an issue with tapping into the request pool. The new one on the other hand allocates a new request for each of the actualy steps of the flush sequence. If have already allocated all of the tags for IO, we will fail allocating the flush request. Set aside a reserved request just for flushes. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 25 10月, 2013 11 次提交
-
-
由 Christoph Hellwig 提交于
Add a helper to iterate over all hw queues and stop them. This is useful for driver that implement PM suspend functionality. Signed-off-by: NChristoph Hellwig <hch@lst.de> Modified to just call blk_mq_stop_hw_queue() by Jens. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
A driver that simply completes IO it receives, it does no transfers. Written to fascilitate testing of the blk-mq code. It supports various module options to use either bio queueing, rq queueing, or mq mode. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Shaohua Li 提交于
Add an API to return free tags, blk-mq-tag will use it. Note, this just returns a snapshot of free tags number. blk-mq-tag has two usages of it. One is for info output for diagnosis. The other is to quickly check if there are free tags for request dispatch checking. Neither requires very precise. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NShaohua Li <shli@fusionio.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Shaohua Li 提交于
Add a new API to iterate free ids. blk-mq-tag will use it. Note, this doesn't guarantee to iterate all free ids restrictly. Caller should be aware of this. blk-mq uses it to do sanity check for request timedout, so can tolerate the limitation. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NShaohua Li <shli@fusionio.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Shaohua Li 提交于
Make percpu_ida percpu size/batch configurable. The block-mq-tag will use it. After block-mq uses percpu_ida to manage tags, performance is improved. My test is done in a 2 sockets machine, 12 process cross the 2 sockets. So if there is lock contention or ipi, should be stressed heavily. Testing is done for null-blk. hw_queue_depth nopatch iops patch iops 64 ~800k/s ~1470k/s 2048 ~4470k/s ~4340k/s Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NShaohua Li <shli@fusionio.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Shaohua Li 提交于
In my usage, sometimes the percpu APIs are called with irq locked, sometimes not. lockdep complains there is potential deadlock. Let's always use percpucounter lock in irq safe way. There should be no performance penality, as all those are slow code path. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NShaohua Li <shli@fusionio.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
This reference count has been around since before git history, but the only place where it's used is in blk_execute_rq, and ther it is entirely useless as it is incremented before submitting the request and decremented in the end_io handler before waking up the submitter thread. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
We have officially run out of flags in a 32-bit space. Extend it to 64-bit even on 32-bit archs. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
blk-mq reuses the request potentially immediately, since the most cache hot is always given out first. This means that rq->csd could be reused between csd->func() being called and csd_unlock() being called. This isn't a problem, since we never use wait == 1 for the smp call function. Add CSD_FLAG_WAIT to be able to tell the difference, retaining the warning for other cases. Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
The blk-mq core and the blk-mq null driver uses it. Reviewed-by: NChristoph Hellwig <hch@lst.de> Acked-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 14 10月, 2013 10 次提交
-
-
由 Linus Torvalds 提交于
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fixes from Wim Van Sebroeck: "This will fix a deadlock on the ts72xx_wdt driver, fix bitmasks in the kempld_wdt driver and fix a section mismatch in the sunxi_wdt driver" * git://www.linux-watchdog.org/linux-watchdog: watchdog: sunxi: Fix section mismatch watchdog: kempld_wdt: Fix bit mask definition watchdog: ts72xx_wdt: locking bug in ioctl
-
由 Maxime Ripard 提交于
This driver has a section mismatch, for probe and remove functions, leading to the following warning during the compilation. WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in reference from the variable sunxi_wdt_driver to the function .init.text:sunxi_wdt_probe() The variable sunxi_wdt_driver references the function __init sunxi_wdt_probe() Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)' handles [9:8] bits. Thus, it should be fixed in order to handle [5:4] bits. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Dan Carpenter 提交于
Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a interruptible deadlock. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A small batch of fixes this week, mostly OMAP related. Nothing stands out as particularly controversial. Also a fix for a 3.12-rc1 timer regression for Exynos platforms, including the Chromebooks" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: dts: Update 5250 arch timer node with clock frequency ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
-
由 Yuvaraj Kumar C D 提交于
Without the "clock-frequency" property in arch timer node, could able to see the below crash dump. [<c0014e28>] (unwind_backtrace+0x0/0xf4) from [<c0011808>] (show_stack+0x10/0x14) [<c0011808>] (show_stack+0x10/0x14) from [<c036ac1c>] (dump_stack+0x7c/0xb0) [<c036ac1c>] (dump_stack+0x7c/0xb0) from [<c01ab760>] (Ldiv0_64+0x8/0x18) [<c01ab760>] (Ldiv0_64+0x8/0x18) from [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) from [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) from [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) from [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) from [<c04b40d8>] (clocksource_of_init+0x34/0x58) [<c04b40d8>] (clocksource_of_init+0x34/0x58) from [<c049ed8c>] (time_init+0x20/0x2c) [<c049ed8c>] (time_init+0x20/0x2c) from [<c049b95c>] (start_kernel+0x1e0/0x39c) THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set up the CNTFRQ register as expected by arch_timer. Instead, we have to specify the frequency in the device tree like this. Signed-off-by: NYuvaraj Kumar C D <yuvaraj.cd@samsung.com> [olof: Changed subject, added comment, elaborated on commit message] Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few fixes for omap3 related hangs and errors that people have noticed now that people are actually using the device tree based booting for omap3. Also one regression fix for timer compile for dra7xx when omap5 is not selected, and a LED regression fix for n900. * tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: "This patchset includes a bugfix to prevent a kernel crash when memory in page zero is accessed by the kernel itself, e.g. via probe_kernel_read(). Furthermore we now export flush_cache_page() which is needed (indirectly) by the lustre filesystem. The other patches remove unused functions and optimizes the page fault handler to only evaluate variables if needed, which again protects against possible kernel crashes" * 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: let probe_kernel_read() capture access to page zero parisc: optimize variable initialization in do_page_fault parisc: fix interruption handler to respect pagefault_disable() parisc: mark parisc_terminate() noreturn and cold. parisc: remove unused syscall_ipi() function. parisc: kill SMP single function call interrupt parisc: Export flush_cache_page() (needed by lustre)
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Another week, time to send another fixes request taking time out of extended weekend for the festivities in this part of the world. We have two fixes from Sergei for rcar driver and one fixing memory leak of edma driver by Geyslan" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: edma.c: remove edma_desc leakage rcar-hpbdma: add parameter to set_slave() method rcar-hpbdma: remove shdma_free_irq() calls
-
- 13 10月, 2013 16 次提交
-
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 John David Anglin 提交于
The attached change defers the initialization of the variables tsk, mm and flags until they are needed. As a result, the code won't crash if a kernel probe is done with a corrupt context and the code will be better optimized. Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Running an "echo t > /proc/sysrq-trigger" crashes the parisc kernel. The problem is, that in print_worker_info() we try to read the workqueue info via the probe_kernel_read() functions which use pagefault_disable() to avoid crashes like this: probe_kernel_read(&pwq, &worker->current_pwq, sizeof(pwq)); probe_kernel_read(&wq, &pwq->wq, sizeof(wq)); probe_kernel_read(name, wq->name, sizeof(name) - 1); The problem here is, that the first probe_kernel_read(&pwq) might return zero in pwq and as such the following probe_kernel_reads() try to access contents of the page zero which is read protected and generate a kernel segfault. With this patch we fix the interruption handler to call parisc_terminate() directly only if pagefault_disable() was not called (in which case preempt_count()==0). Otherwise we hand over to the pagefault handler which will try to look up the faulting address in the fixup tables. Signed-off-by: NHelge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Jiang Liu 提交于
Commit 9a46ad6d "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one interrupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Geert Uytterhoeven 提交于
ERROR: "flush_cache_page" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined! Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Linus Torvalds 提交于
Olga reported that file descriptors opened with O_PATH do not work with fstatfs(), found during further development of ksh93's thread support. There is no reason to not allow O_PATH file descriptors here (fstatfs is very much a path operation), so use "fdget_raw()". See commit 55815f70 ("vfs: make O_PATH file descriptors usable for 'fstat()'") for a very similar issue reported for fstat() by the same team. Reported-and-tested-by: Nольга крыжановская <olga.kryzhanovska@gmail.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org # O_PATH introduced in 3.0+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 bugfixes from Ted Ts'o: "A bug fix and performance regression fix for ext4" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix memory leak in xattr ext4: fix performance regression in writeback of random writes
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "We've got more bug fixes in my for-linus branch: One of these fixes another corner of the compression oops from last time. Miao nailed down some problems with concurrent snapshot deletion and drive balancing. I kept out one of his patches for more testing, but these are all stable" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix oops caused by the space balance and dead roots Btrfs: insert orphan roots into fs radix tree Btrfs: limit delalloc pages outside of find_delalloc_range Btrfs: use right root when checking for hash collision
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "All stable fixes except for a trivial headset mic fixup: the removal of bogus frame checks in snd-usb-usx2y driver that have regressed in the recent kernel versions, the HD-audio HDMI channel map fix, and a few HD-audio device-specific fixes" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Sony VAIO Pro 13 (haswell) now has a working headset jack ALSA: hda - Add a headset mic model for ALC269 and friends ALSA: hda - Fix microphone for Sony VAIO Pro 13 (Haswell model) ALSA: hda - Add fixup for ASUS N56VZ ALSA: hda - hdmi: Fix channel map switch not taking effect ALSA: hda - Fix mono speakers and headset mic on Dell Vostro 5470 ALSA: snd-usb-usx2y: remove bogus frame checks
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "We had various reports of problems with deferred probing in the I2C subsystem, so this pull requst is a little bigger than usual. Most issues should be addressed now so devices will be found correctly. A few ususal driver bugfixes are in here, too" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-mux-pinctrl: use deferred probe when adapter not found i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not found i2c: i2c-mux-gpio: use deferred probing i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errors i2c: omap: Clear ARDY bit twice i2c: Not all adapters have a parent i2c: i2c-stu300: replace platform_driver_probe to support deferred probing i2c: i2c-mxs: replace platform_driver_probe to support deferred probing i2c: i2c-imx: replace platform_driver_probe to support deferred probing i2c: i2c-designware-platdrv: replace platform_driver_probe to support deferred probing
-
由 Dave Jones 提交于
If we take the 2nd retry path in ext4_expand_extra_isize_ea, we potentionally return from the function without having freed these allocations. If we don't do the return, we over-write the previous allocation pointers, so we leak either way. Spotted with Coverity. [ Fixed by tytso to set is and bs to NULL after freeing these pointers, in case in the retry loop we later end up triggering an error causing a jump to cleanup, at which point we could have a double free bug. -- Ted ] Signed-off-by: NDave Jones <davej@fedoraproject.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NEric Sandeen <sandeen@redhat.com> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull gcc "asm goto" miscompilation workaround from Ingo Molnar: "This is the fix for the GCC miscompilation discussed in the following lkml thread: [x86] BUG: unable to handle kernel paging request at 00740060 The bug in GCC has been fixed by Jakub and the fix will be part of the GCC 4.8.2 release expected to be released next week - so the quirk's version test checks for <= 4.8.1. The quirk is only added to compiler-gcc4.h and not to the higher level compiler.h because all asm goto uses are behind a feature check" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compiler/gcc4: Add quirk for 'asm goto' miscompilation bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "A build fix and a reboot quirk" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/reboot: Add reboot quirk for Dell Latitude E5410 x86, build, pci: Fix PCI_MSI build on !SMP
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC fix from Vineet Gupta: "Fix for broken gdb 'jump'" * tag 'arc-fixes-for-3.12-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Ignore ptrace SETREGSET request for synthetic register "stop_pc"
-
- 12 10月, 2013 1 次提交
-
-
由 Vineet Gupta 提交于
ARCompact TRAP_S insn used for breakpoints, commits before exception is taken (updating architectural PC). So ptregs->ret contains next-PC and not the breakpoint PC itself. This is different from other restartable exceptions such as TLB Miss where ptregs->ret has exact faulting PC. gdb needs to know exact-PC hence ARC ptrace GETREGSET provides for @stop_pc which returns ptregs->ret vs. EFA depending on the situation. However, writing stop_pc (SETREGSET request), which updates ptregs->ret doesn't makes sense stop_pc doesn't always correspond to that reg as described above. This was not an issue so far since user_regs->ret / user_regs->stop_pc had same value and both writing to ptregs->ret was OK, needless, but NOT broken, hence not observed. With gdb "jump", they diverge, and user_regs->ret updating ptregs is overwritten immediately with stop_pc, which this patch fixes. Reported-by: NAnton Kolesov <akolesov@synopsys.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-