- 11 10月, 2007 40 次提交
-
-
由 Eric W. Biederman 提交于
When sysfs support is compiled out the kernel still keeps and maintains the kobject tree. So it is not safe to skip our kobject reference counting or to avoid becoming members of the kobject tree. It is safe to not add the networking specific sysfs attributes. This patch removes the sysfs special cases from net/core/dev.c renames functions from netdev_sysfs_xxxx to netdev_kobject_xxxx and always compiles in net-sysfs.c net-sysfs.c is modified with a CONFIG_SYSFS guard around the parts that are actually sysfs specific. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
As suggested by DaveM. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
Since DCCP requires to close both ends of a connection simultaneously, permission to write in state DCCP_CLOSING is removed in dccp_sendmsg(): * if the sending end closed, it would encounter a write error anyhow; * if the other end has closed the connection, it accepts no more data. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
This factors code common to dccp_v{4,6}_ctl_send_reset into a separate function, and adds support for filling in the Data 1 ... Data 3 fields from RFC 4340, 5.6. It is useful to have this separate, since the following Reset codes will always be generated from the control socket rather than via dccp_send_reset: * Code 3, "No Connection", cf. 8.3.1; * Code 4, "Packet Error" (identification for Data 1 added); * Code 5, "Option Error" (identification for Data 1..3 added, will be used later); * Code 6, "Mandatory Error" (same as Option Error); * Code 7, "Connection Refused" (what on Earth is the difference to "No Connection"?); * Code 8, "Bad Service Code"; * Code 9, "Too Busy"; * Code 10, "Bad Init Cookie" (not used). Code 0 is not recommended by the RFC, the following codes would be used in dccp_send_reset() instead, since they all relate to an established DCCP connection: * Code 1, "Closed"; * Code 2, "Aborted"; * Code 11, "Aggression Penalty" (12.3). Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
This replaces normal addition with mod-48 addition so that sequence number wraparound is respected. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
This implements a SHOULD from RFC 4340, 7.5.4: "To protect against denial-of-service attacks, DCCP implementations SHOULD impose a rate limit on DCCP-Syncs sent in response to sequence-invalid packets, such as not more than eight DCCP-Syncs per second." The rate-limit is maintained on a per-socket basis. This is a more stringent policy than enforcing the rate-limit on a per-source-address basis and protects against attacks with forged source addresses. Moreover, the mechanism is deliberately kept simple. In contrast to xrlim_allow(), bursts of Sync packets in reply to sequence-invalid packets are not supported. This foils such attacks where the receipt of a Sync triggers further sequence-invalid packets. (I have tested this mechanism against xrlim_allow algorithm for Syncs, permitting bursts just increases the problems.) In order to keep flexibility, the timeout parameter can be set via sysctl; and the whole mechanism can even be disabled (which is however not recommended). The algorithm in this patch has been improved with regard to wrapping issues thanks to a suggestion by Arnaldo. Commiter note: Rate limited the step 6 DCCP_WARN too, as it says we're sending a sync. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
In this patch, duplicated code is removed for the case when a Reset packet is sent from a connected socket. This code duplication is between dccp_make_reset and dccp_transmit_skb, which already contained an (up to now entirely unused) switch statement to fill in the reset code from the DCCP_SKB_CB. The only thing that has been removed is the call to dst_clone(dst), since the queue_xmit functions use sk_dst_cache anyway. I wasn't sure which purpose inet_sk_rebuild_header served, so I left it in. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
This adds fields to support the informational Data 1..3 fields of the DCCP-Reset packets (RFC 4340, 5.6), and makes minor cosmetic changes to documentation. Code which fills in these fields follows in subsequent patches, it is primarily used for reporting option-processing and feature-negotiation errors. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
This adds a FIXME to signal that the function dccp_send_delayed_ack is nowhere used in the entire DCCP/CCID code. Using a delayed Ack timer is suggested in 11.3 of RFC 4340, but it has also rather subtle implications for the Ack-Ratio-accounting. CCID2 does not use this (maybe it should). I think leaving the function in is good, in case someone wants to implement this. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
This moves several instances of testing against NULL into the function which is used to de-reference the CCID-private data. Committer note: Made the BUG_ON depend on having CONFIG_IP_DCCP_CCID3_DEBUG, as it is too much to have this on production code. Also made sure that the macro is used only after checking if sk_state is not LISTEN, to make it equivalent to what we had before. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
This fixes the code to correspond to RFC 4340, 7.5.4, which states the exception that a Sync received in state REQUEST generates a Reset (not a SyncAck). To achieve this, only a small change is required. Since dccp_rcv_request_sent_state_process() already uses the correct Reset Code number 4 ("Packet Error"), we only need to shift the if-statement a few lines further down. (To test this case: replace DCCP_PKT_RESPONSE with DCCP_PKT_SYNC in dccp_make_response.) Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 WANG Cong 提交于
This patch: - makes hidp_setup_input() return int to indicate errors; - checks its return value to handle errors. And this time it is against -rc7-mm1 tree. Thanks to roel and Marcel Holtmann for comments. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
In case of ACK reordering, the SACK block might be valid in it's time but is already obsoleted since we've received another kind of confirmation about arrival of the segments through snd_una advancement of an earlier packet. I didn't bother to build distinguishing of valid and invalid SACK blocks but simply made reordered SACK blocks that are too old always not counted regardless of their "real" validity which could be determined by using the ack field of the reordered packet (won't be significant IMHO). DSACKs can very well be considered useful even in this situation, so won't do any of this for them. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
I previously added checking to position that is rather poor as state has already been adjusted quite a bit. Re-placing it above all state changes should be more robust though the return should never ever get executed regardless of its place :-). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
The parameter `seq' of dccp_send_sync() is in fact an acknowledgement number and not a sequence number - thus renamed by this patch into `ackno'. Secondly, a `critical' warning is added when a Sync/SyncAck could not be sent. Sanity: I have checked all other functions that are called in dccp_transmit_skb, there are no clashes with the use of dccpd_ack_seq; no other function is using this slot at the same time. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This updates sequence number checking with regard to RFC 4340, 7.5.4. Missing in the code was an exception for sequence-invalid Reset packets, which get a Sync acknowledging GSR, instead of (as usual) P.seqno. This can lead to an oscillating ping-pong flood of Reset packets. In fact, it has been observed on the wire as follows: 1. client establishes connection to server; 2. before server can write to client, client crashes without notifying the server (NB: now no longer possible due to ABORT function); 3. server sends DCCP-Data packet (has no ackno); 4. client generates Reset "No Connection", seqno=0, increments seqno; 5. server replies with Sync, using ackno = P.seqno; 6. client generates Reset "No Connection" with seqno = ackno + 1; 7. goto (5). The difference is that now in (5) the server uses GSR. This causes the Reset sent by the client in (6) to become sequence-valid, so that in (7) the vicious circle is broken; the Reset is then enqueued and causes the socket to enter TIMEWAIT state. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This patch is in part required by the next patch; it * replaces 6 instances of `DCCP_SKB_CB(skb)->dccpd_seq' with `seqno'; * replaces 7 instances of `DCCP_SKB_CB(skb)->dccpd_ack_seq' with `ackno'; * replaces 1 use of dccp_inc_seqno() by unfolding `ADD48' macro in place. No changes in algorithm, all changes are text replacement/substitution. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
The third parameter of dccp_sample_rtt now becomes useless and is removed. Also combined the subtraction of the timestamp echo and the elapsed time. This is safe, since (a) presence of timestamp echo is tested first and (b) elapsed time is either present and non-zero or it is not set and equals 0 due to the memset in dccp_parse_options. To avoid measuring option-processing time, the timestamp for measuring the initial Request/Response RTT sample is taken directly when the function is called (the Linux implementation always adds a timestamp on the Request, so there is no loss in doing this). Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This provides a timesource, conveniently used for DCCP timestamps, which returns the elapsed time in 10s of microseconds since initialisation. This makes for a wrap-around time of about 11.9 hours, which should be sufficient for most applications. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This patch reduces the number of timestamps taken in the receive path for each packet. The ccid3_hc_tx_update_x() routine is called in * the receive path for each CCID3-controlled packet * for the nofeedback timer (if no feedback arrives during 4 RTT) Currently, when there is no loss, each packet gets timestamped twice. The patch resolves this by recycling the first timestamp taken on packet reception for RTT sampling. When the no_feedback_timer() is called, then the timestamp argument is simply set to NULL - so that ccid3_hc_tx_update_x() takes care of the logic. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Wu 提交于
Might as well rename ieee80211_cfg.h to cfg.h to keep things consistent. Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Each station has a vlan_id that is useless. Remove it. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
The parse result typedef isn't needed. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
It's just painful to have the extra ieee80211_ prefix. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This makes mac80211 print out the wiphy name instead of the master device name where appropriate. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This fixes a warning about NUM_IEEE80211_MODES missing in a switch statement. Intentionally do not add a default case so we get warnings at these places if we need to add new modes. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This patch removes the key threshold stuff from mac80211. I have patches for later that add it as a per-key setting to nl/cfg80211. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This patch allows drivers to indicate bad FCS/PLCP CRC to the stack and have the stack drop packets like that except for monitor interfaces. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Buesch 提交于
This adds support for disabling the radio and setting the TXpower through wext. This also fixes the prism TXpower ioctl (It always overwrote the TXpower value in ieee80211_hw_config()) Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
It seems I was actually able to hit this deadlock, on my quad G5 softmac locks up more often than not. This fixes it by using an own workqueue that can safely be flushed under RTNL. Not sure if the patch is correct with the workqueue naming. And don't think with the patch it doesn't continually lock up. It still does, just doesn't invoke lockdep warnings all the time. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
For N cpus, with full throttle traffic on all N CPUs, funneling traffic to the same ethernet device, the devices queue lock is contended by all N CPUs constantly. The TX lock is only contended by a max of 2 CPUS. In the current mode of operation, after all the work of entering the dequeue region, we may endup aborting the path if we are unable to get the tx lock and go back to contend for the queue lock. As N goes up, this gets worse. The changes in this patch result in a small increase in performance with a 4CPU (2xdual-core) with no irq binding. Both e1000 and tg3 showed similar behavior; Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
This patch replaces all occurences to the static variable loopback_dev to a pointer loopback_dev. That provides the mindless, trivial, uninteressting change part for the dynamic allocation for the loopback. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Acked-By: NKirill Korotaev <dev@sw.ru> Acked-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
There's no reason to clear the sacktag skb hint when small part of the rexmit queue changes. Account changes (if any) instead when fragmenting/collapsing. RTO/FRTO do not touch SACKED_ACKED bits so no need to discard SACK tag hint at all. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Most of the description that follows comes from my mail to netdev (some editing done): Main obstacle to FRTO use is its deployment as it has to be on the sender side where as wireless link is often the receiver's access link. Take initiative on behalf of unlucky receivers and enable it by default in future Linux TCP senders. Also IETF seems to interested in advancing FRTO from experimental [1]. How does FRTO help? =================== FRTO detects spurious RTOs and avoids a number of unnecessary retransmissions and a couple of other problems that can arise due to incorrect guess made at RTO (i.e., that segments were lost when they actually got delayed which is likely to occur e.g. in wireless environments with link-layer retransmission). Though FRTO cannot prevent the first (potentially unnecessary) retransmission at RTO, I suspect that it won't cost that much even if you have to pay for each bit (won't be that high percentage out of all packets after all :-)). However, usually when you have a spurious RTO, not only the first segment unnecessarily retransmitted but the *whole window*. It goes like this: all cumulative ACKs got delayed due to in-order delivery, then TCP will actually send 1.5*original cwnd worth of data in the RTO's slow-start when the delayed ACKs arrive (basically the original cwnd worth of it unnecessarily). In case one is interested in minimizing unnecessary retransmissions e.g. due to cost, those rexmissions must never see daylight. Besides, in the worst case the generated burst overloads the bottleneck buffers which is likely to significantly delay the further progress of the flow. In case of ll rexmissions, ACK compression often occurs at the same time making the burst very "sharp edged" (in that case TCP often loses most of the segments above high_seq => very bad performance too). When FRTO is enabled, those unnecessary retransmissions are fully avoided except for the first segment and the cwnd behavior after detected spurious RTO is determined by the response (one can tune that by sysctl). Basic version (non-SACK enhanced one), FRTO can fail to detect spurious RTO as spurious and falls back to conservative behavior. ACK lossage is much less significant than reordering, usually the FRTO can detect spurious RTO if at least 2 cumulative ACKs from original window are preserved (excluding the ACK that advances to high_seq). With SACK-enhanced version, the detection is quite robust. FRTO should remove the need to set a high lower bound for the RTO estimator due to delay spikes that occur relatively common in some environments (esp. in wireless/cellular ones). [1] http://www1.ietf.org/mail-archive/web/tcpm/current/msg02862.htmlSigned-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Basically this change enables it, previously other undo_marker users were left with nothing. Reverse undo_marker logic completely to get it set right in CA_Loss. On the other hand, when spurious RTO is detected, clear it. Clearing might be too heavy for some scenarios but seems safe enough starting point for now and shouldn't have much effect except in majority of cases (if in any). By adding a new FLAG_ we avoid looping through write_queue when RTO occurs. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Implements following cleanups: - Comment re-placement (CodingStyle) - tcp_tso_acked() local (wrapper-like) variable removal (readability) - __-types removed (IMHO they make local variables jumpy looking and just was space) - acked -> flag (naming conventions elsewhere in TCP code) - linebreak adjustments (readability) - nested if()s combined (reduced indentation) - clarifying newlines added Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
The accounting code is pretty much the same, so it's a shame we do it in two places. I'm not too sure if added fully_acked check in MTU probing is really what we want perhaps the added end_seq could be used in the after() comparison. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
In addition, fix its function comment spacing. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
-