- 15 11月, 2008 7 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Instead of storing the pointer for the proper entry at chip description table, the driver were storing an indirect reference, by using an index. Better to reference directly the data. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
A driver used on several bttv boards since 2000 is not experimental anymore ;) Remove it from the comments. While there, update copyrights addind a quick note about the "recent" updates since 2005. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This patch checks for volume, bass, treble, set mode and get mode callbacks before actually enabling the code that would use them. Instead of aborting the driver for load, this patch will allow it to load with a reduced number of functionatities. This prevents OOPS if some board entry is missing a needed callback. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
generic_checkmode() were called, via a callback, for some tvaudio chips. There's just one callback code used on all those boards. So, it makes no sense on keeping this as a callback. Since there were some OOPS reported on tvaudio on kerneloops.org, this patch removes this callback, adding the code at the only place were it is called: inside chip_tread. A flag were added to indicate the need for a kernel thread to set stereo mode on cards that needs it. Using this more direct approach simplifies the code, making it more robust against human errors. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Also, the default standard is the first one. So, fix the comment at the array. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 12 10月, 2008 1 次提交
-
-
由 Arjan van de Ven 提交于
NULL function pointers are very bad security wise. This one got caught by kerneloops.org quite a few times, so it's happening in the field.... Fix is simple, check the function pointer for NULL, like 6 other places in the same function are already doing. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 7月, 2008 1 次提交
-
-
由 Jean Delvare 提交于
The tvaudio driver is using "official" I2C device IDs for internal purpose. There must be some historical reason behind this but anyway, it shouldn't do that. As the stored values are never used, the easiest way to fix the problem is simply to remove them altogether. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 12 5月, 2008 1 次提交
-
-
由 Jean Delvare 提交于
Update 3 more new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. These video drivers aren't used yet so converting them is trivial. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 30 4月, 2008 1 次提交
-
-
由 Jean Delvare 提交于
Based on earlier work by Jon Smirl and Jochen Friedrich. This patch allows new-style i2c chip drivers to have alias names using the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this point, the old i2c driver binding scheme (driver_name/type) is still supported. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Jochen Friedrich <jochen@scram.de> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org>
-
- 25 4月, 2008 1 次提交
-
-
- Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 18 2月, 2008 1 次提交
-
-
由 Roel Kluin 提交于
'!' has a higher priority than '&': bitanding has no effect. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 1月, 2008 2 次提交
-
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
V4L1 ioctls were replaced to V4L2 were applicable. The older ones already implemented were removed. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 10月, 2007 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This patch removes all occurences of moduleparm.h from drivers/media files. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 21 7月, 2007 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 18 7月, 2007 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NNigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 5月, 2007 1 次提交
-
-
由 Randy Dunlap 提交于
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 4月, 2007 2 次提交
-
-
由 Jean Delvare 提交于
The tda7432, tda9875 and tvaudio media drivers don't need to include the linux/i2c-algo-bit.h header file. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 08 12月, 2006 1 次提交
-
-
由 Nigel Cunningham 提交于
Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: NNigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 9月, 2006 1 次提交
-
-
由 Cedric Le Goater 提交于
Replaced kernel_thread() with kthread_run() since kernel_thread() is deprecated in drivers/modules. Removed the completion and the wait queue which are now useless with kthread. Also removed the allow_signal() call as signals don't apply to kernel threads. Fixed a small race condition when thread is stopped. Please check if the timer vs. thread still works fine without the wait queue. Signed-off-by: NCedric Le Goater <clg@fr.ibm.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 02 4月, 2006 1 次提交
-
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 25 3月, 2006 5 次提交
-
-
由 Hans Verkuil 提交于
Add a new audio mode V4L2_TUNER_MODE_LANG1_LANG2 (used by VIDIOC_G/S_TUNER). This mode allows the user to select both languages of a bilingual transmission, one language on the left, one on the right audio channel. If there is no bilingual transmission, or it is not supported, then this mode should act like V4L2_TUNER_MODE_STEREO. This mode is introduced for PVR-like drivers where it is useful to be able to record both languages of a bilingual broadcast. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
- implement VIDIOC_INT_S_AUDIO_ROUTING for msp3400 and tvaudio - use the new command in bttv, pvrusb2 and em28xx. - remove the now obsolete MSP_SET_MATRIX from msp3400 (yeah!) - remove the obsolete VIDIOC_S_AUDIO from msp3400. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
I2C_foo were used for some i2c addresses. Bad, since those constants could mean other i2c chip things. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 24 1月, 2006 2 次提交
-
-
由 Hans Verkuil 提交于
- Audmode and rxsubchans fixes in msp3400, tuner, tvaudio and cx25840. - msp3400 cleanups Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
- Add probe check for the tda9840 to prevent misdetection of a Micronas dpl3518a as a tda9840. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 23 1月, 2006 1 次提交
-
-
由 Hans Verkuil 提交于
- Add probe check for the tda9840 to prevent misdetection of a Micronas dpl3518a as a tda9840. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 12 1月, 2006 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
V4L/DVB (3345): Fixes some bad global variables - Debug global var is already used inside kernel. - v4l_dbg now expects the debug var - global vars inside msp34xx renamed to msp_* Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Panagiotis Issaris 提交于
V4L/DVB (3344a): Conversions from kmalloc+memset to k(z|c)alloc Conversions from kmalloc+memset to k(z|c)alloc. Signed-off-by: NPanagiotis Issaris <takis@issaris.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 1月, 2006 5 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- i2c names shorten - removed obsoleted flags on newer modules - small cleanups Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Convert diagnostics over to the new v4l2-common.h macros. - deprecated tuner_debug option, the new option is debug. - renamed cx25840_debug to debug. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- Now, all internal ioctls are at v4l2-common.h - removed unused ioctl at saa6752hs.h - all debug ioctl code moved to v4l2-common.c - removed duplicated stuff from other cards Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- When in radio mode don't do anything with VIDIOC_G_TUNER. Allow other devices to fill this. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- debug messages changed to be like the other modules - Add V4L2 commands VIDIOC_S_TUNER, VIDIOC_G_TUNER, VIDIOC_S_STD and VIDIOC_S_FREQUENCY. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-